Natural Gas (NG) Internal Combustion Engines (ICE) are a promising alternative to diesel engines for on-road heavy-duty applications to reduce greenhouse gas and harmful pollutant emissions. NG engines have not been w...Natural Gas (NG) Internal Combustion Engines (ICE) are a promising alternative to diesel engines for on-road heavy-duty applications to reduce greenhouse gas and harmful pollutant emissions. NG engines have not been widely adopted due to the lower thermal efficiency compared with diesel engine counterparts. To develop the base knowledge required to reach the desired efficiency, a Single Cylinder Engine (SCE) is the most effective platform to acquire reliable and repeatable data. A SCE test cell was developed using a Cummins 15-liter six-cylinder heavy-duty engine block modified to fire one cylinder (2.5-liter displacement). A Woodward Large Engine Control Module (LECM) is integrated to permit implementation of real-time advanced combustion control. Intake and exhaust characteristics, fuel composition, and exhaust gas recirculated substitution rate (EGR) are fully adjustable. A high-speed data acquisition system acquires in-cylinder, intake, and exhaust pressure for combustion analysis. The baseline testing shows reliable and consistent results for engine thermal efficiency, indicated mean effective pressure (IMEP), and coefficient of variance of the IMEP over a wide range of operating conditions while achieving effective control of all engine control and operation variables. This test cell will be used to conduct a research program to develop new and innovative control algorithms and CFD optimized combustion chamber designs, allowing ultra-high efficiency and low emissions for NG ICE heavy-duty on-road applications.展开更多
Oxide-Zeolite(OX-ZEO) bifunctional catalyst design concept has been exemplified in several processes to direct conversion syngas to value-added chemicals and fuels such as mixed light olefins, ethylene, aromatics and ...Oxide-Zeolite(OX-ZEO) bifunctional catalyst design concept has been exemplified in several processes to direct conversion syngas to value-added chemicals and fuels such as mixed light olefins, ethylene, aromatics and gasoline.Herein we demonstrate that the product can be steered toward liquefied petroleum gas(LPG) with a selectivity up to 89% in hydrocarbons especially propane selectivity reaching 80% at CO conversion of 63% using ZnCrOx-H-SSZ-39 catalyst.Interestingly, the quantity of the acid sites of SSZ-39 does not influence obviously the hydrocarbon distribution but the strength is crucial for selective formation of propane.This finding provides an alternative route of LPG synthesis from a variety of carbon resources via syngas.展开更多
Underground storage in rock caverns is widely used in Norway for many different petroleum products,such as crude oil,fuel,propane and butane.Basically,the caverns for such storages are unlined,i.e.containment is ensur...Underground storage in rock caverns is widely used in Norway for many different petroleum products,such as crude oil,fuel,propane and butane.Basically,the caverns for such storages are unlined,i.e.containment is ensured without using any steel lining or membrane.The main basis for the storage technology originates from the extensive hydropower development in Norway.As part of this activity,about 4500 km of tunnels and shafts have been excavated,and around 200 large powerhouse caverns have been constructed.The hydropower tunnels are mainly unlined,with hydrostatic water pressure on unlined rock of up to 1000 m.Some of the projects also include air cushion chambers with volumes of up to 1×10^(5)m^(3)and air pressure up to 7.7 MPa.Many lessons which are valuable also for underground oil and gas storage have been learnt from these projects.For a storage project to become successful,systematic,well planned design and ground investigation procedures are crucial.The main steps of the design procedure are first to define the optimum location of the project,and then to optimize orientation,shape/geometry and dimensions of caverns and tunnels.As part of the procedure,ground investigations have to be carried out at several steps integrated with the progress of design.The investigation and design procedures,and the great significance of these for the project to become successful will be discussed.Case examples of oil and gas storage in unlined rock caverns are given,illustrating the relevancy of experience from high-pressure hydropower projects for planning and design of unlined caverns for oil and gas storage.展开更多
This article is focused on technical and economic evaluation of more than 6-years experiences of operating the Waste Heat Recovery technology—the manner and system of flue gas processing generated in the combustion p...This article is focused on technical and economic evaluation of more than 6-years experiences of operating the Waste Heat Recovery technology—the manner and system of flue gas processing generated in the combustion process in heat & power plants, cogeneration units, etc., which burn the gaseous fuel, primarily natural gas, or methane, biogas, geothermal gas, or other gaseous mixtures containing hydrogen. The solution proposes a more effective and non-traditional use of gaseous fuel for heating, the flue gases of which are processed in order to extract additional utilisable heat, with potential elimination of CO2 from them. Deploying of the heating plant in an island regime (OFF-GRID) enables definition of the benefits brought by the 3 years of operational experience and presents visions for the future offering the possibility to utilise the support energy services at the municipal as well as regional level.展开更多
A liquefied petroleum gas （LPG） sensor with high selectivity, sensitivity and low power consumption has been developed based on indium oxide with very low resistance. Nanocrystalline In203 gas sensing materials were...A liquefied petroleum gas （LPG） sensor with high selectivity, sensitivity and low power consumption has been developed based on indium oxide with very low resistance. Nanocrystalline In203 gas sensing materials were directly synthesized through a one-step controllable solvothermal process at 210 ℃ for 24 h, using InCI3.4H2O as the starting material, cetyltrimethyl ammonium bromide （CTAB） as additive and ethanol as the solvent. The obtained samples were characterized by X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. The results showed that indium oxide takes on uniform cubic shape with range size of 10~30 nm and fine dispersivity. Gas sensitivity was measured in a mixing static gas. The results indicated that 3.0 V is the best working voltage of the sensor to LPG. Sensitivity is 12.6. The response-time and recovery-time are 3 s and 10 s respectively. Power consumption is only around 200 mW.展开更多
To implement the "Green Olympic"strategy proposed in "Plan for Beijing Olympic Games,"Beijing Gas Group Company will boost its annual gas supply to 4 billion cubic meters by 2005 and 6 billion cubi...To implement the "Green Olympic"strategy proposed in "Plan for Beijing Olympic Games,"Beijing Gas Group Company will boost its annual gas supply to 4 billion cubic meters by 2005 and 6 billion cubic meters by 2010.展开更多
This paper presents a quantitative risk analysis of liquefied petroleum gas(LPG)transportation.An accident that happened on June 13,2020,on the highway near Wenling,China is studied as a case.In this accident,LPG carr...This paper presents a quantitative risk analysis of liquefied petroleum gas(LPG)transportation.An accident that happened on June 13,2020,on the highway near Wenling,China is studied as a case.In this accident,LPG carried by a tank truck on the highway leaked and caused a large explosion,which led to 20 deaths.Different methods are combined to calculate the consequence of the accident.Multi-energy model and rupture of vessel model are employed to calculate the overpressure;the simulation result of the multi-energy model is closer to the damage caused by the accident.The safety distances in accidents of LPG transport storage tanks of different capacities are calculated in this study;the results show that the damage of explosion will increase with the filling degree of the tank.Even though the filling degree is 90%(value required by law),the 99%fatality rate range will reach 42 m,which is higher than regulated distance between road and building.The social risk of the tank truck has also been calculated and the results show that the risk is not acceptable.The calculating method used in this study could evaluate the risk of LPG tanker more accurately,which may contribute to the establishment of transportation regulation so that losses from similar accidents in the future could be reduced.展开更多
文摘Natural Gas (NG) Internal Combustion Engines (ICE) are a promising alternative to diesel engines for on-road heavy-duty applications to reduce greenhouse gas and harmful pollutant emissions. NG engines have not been widely adopted due to the lower thermal efficiency compared with diesel engine counterparts. To develop the base knowledge required to reach the desired efficiency, a Single Cylinder Engine (SCE) is the most effective platform to acquire reliable and repeatable data. A SCE test cell was developed using a Cummins 15-liter six-cylinder heavy-duty engine block modified to fire one cylinder (2.5-liter displacement). A Woodward Large Engine Control Module (LECM) is integrated to permit implementation of real-time advanced combustion control. Intake and exhaust characteristics, fuel composition, and exhaust gas recirculated substitution rate (EGR) are fully adjustable. A high-speed data acquisition system acquires in-cylinder, intake, and exhaust pressure for combustion analysis. The baseline testing shows reliable and consistent results for engine thermal efficiency, indicated mean effective pressure (IMEP), and coefficient of variance of the IMEP over a wide range of operating conditions while achieving effective control of all engine control and operation variables. This test cell will be used to conduct a research program to develop new and innovative control algorithms and CFD optimized combustion chamber designs, allowing ultra-high efficiency and low emissions for NG ICE heavy-duty on-road applications.
基金supported by the Ministry of Science and Technology of China (No.2017YFB0602201)the Chinese Academy of Sciences (XDA21020400)+2 种基金the National Natural Science Foundation of China (Grant nos.91645204, 21425312 and 21621063)the Youth Innovation Promotion Association of Chinese Academy of Sciences (2019184)the INCOE (International Network of Centers of Excellence) project coordinated by BASF SE
文摘Oxide-Zeolite(OX-ZEO) bifunctional catalyst design concept has been exemplified in several processes to direct conversion syngas to value-added chemicals and fuels such as mixed light olefins, ethylene, aromatics and gasoline.Herein we demonstrate that the product can be steered toward liquefied petroleum gas(LPG) with a selectivity up to 89% in hydrocarbons especially propane selectivity reaching 80% at CO conversion of 63% using ZnCrOx-H-SSZ-39 catalyst.Interestingly, the quantity of the acid sites of SSZ-39 does not influence obviously the hydrocarbon distribution but the strength is crucial for selective formation of propane.This finding provides an alternative route of LPG synthesis from a variety of carbon resources via syngas.
文摘Underground storage in rock caverns is widely used in Norway for many different petroleum products,such as crude oil,fuel,propane and butane.Basically,the caverns for such storages are unlined,i.e.containment is ensured without using any steel lining or membrane.The main basis for the storage technology originates from the extensive hydropower development in Norway.As part of this activity,about 4500 km of tunnels and shafts have been excavated,and around 200 large powerhouse caverns have been constructed.The hydropower tunnels are mainly unlined,with hydrostatic water pressure on unlined rock of up to 1000 m.Some of the projects also include air cushion chambers with volumes of up to 1×10^(5)m^(3)and air pressure up to 7.7 MPa.Many lessons which are valuable also for underground oil and gas storage have been learnt from these projects.For a storage project to become successful,systematic,well planned design and ground investigation procedures are crucial.The main steps of the design procedure are first to define the optimum location of the project,and then to optimize orientation,shape/geometry and dimensions of caverns and tunnels.As part of the procedure,ground investigations have to be carried out at several steps integrated with the progress of design.The investigation and design procedures,and the great significance of these for the project to become successful will be discussed.Case examples of oil and gas storage in unlined rock caverns are given,illustrating the relevancy of experience from high-pressure hydropower projects for planning and design of unlined caverns for oil and gas storage.
文摘This article is focused on technical and economic evaluation of more than 6-years experiences of operating the Waste Heat Recovery technology—the manner and system of flue gas processing generated in the combustion process in heat & power plants, cogeneration units, etc., which burn the gaseous fuel, primarily natural gas, or methane, biogas, geothermal gas, or other gaseous mixtures containing hydrogen. The solution proposes a more effective and non-traditional use of gaseous fuel for heating, the flue gases of which are processed in order to extract additional utilisable heat, with potential elimination of CO2 from them. Deploying of the heating plant in an island regime (OFF-GRID) enables definition of the benefits brought by the 3 years of operational experience and presents visions for the future offering the possibility to utilise the support energy services at the municipal as well as regional level.
基金supported by the National Natural Science Foundation of China （Grant No.20471055）
文摘A liquefied petroleum gas （LPG） sensor with high selectivity, sensitivity and low power consumption has been developed based on indium oxide with very low resistance. Nanocrystalline In203 gas sensing materials were directly synthesized through a one-step controllable solvothermal process at 210 ℃ for 24 h, using InCI3.4H2O as the starting material, cetyltrimethyl ammonium bromide （CTAB） as additive and ethanol as the solvent. The obtained samples were characterized by X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. The results showed that indium oxide takes on uniform cubic shape with range size of 10~30 nm and fine dispersivity. Gas sensitivity was measured in a mixing static gas. The results indicated that 3.0 V is the best working voltage of the sensor to LPG. Sensitivity is 12.6. The response-time and recovery-time are 3 s and 10 s respectively. Power consumption is only around 200 mW.
文摘To implement the "Green Olympic"strategy proposed in "Plan for Beijing Olympic Games,"Beijing Gas Group Company will boost its annual gas supply to 4 billion cubic meters by 2005 and 6 billion cubic meters by 2010.
基金the Research Project of National Engineering Research Center for Petroleum Refining Technology and Catalyst(RIPP,SINOPEC)the National Key Research and Development Program of China(No.2018YFC0808600)。
文摘This paper presents a quantitative risk analysis of liquefied petroleum gas(LPG)transportation.An accident that happened on June 13,2020,on the highway near Wenling,China is studied as a case.In this accident,LPG carried by a tank truck on the highway leaked and caused a large explosion,which led to 20 deaths.Different methods are combined to calculate the consequence of the accident.Multi-energy model and rupture of vessel model are employed to calculate the overpressure;the simulation result of the multi-energy model is closer to the damage caused by the accident.The safety distances in accidents of LPG transport storage tanks of different capacities are calculated in this study;the results show that the damage of explosion will increase with the filling degree of the tank.Even though the filling degree is 90%(value required by law),the 99%fatality rate range will reach 42 m,which is higher than regulated distance between road and building.The social risk of the tank truck has also been calculated and the results show that the risk is not acceptable.The calculating method used in this study could evaluate the risk of LPG tanker more accurately,which may contribute to the establishment of transportation regulation so that losses from similar accidents in the future could be reduced.
