Monte Carlo studies on the burnup measurement for the high temperature gas cooling reactor

Online fuel pebble burnup measurement in a future high temperature gas cooling reactor is proposed for implementation through a high purity germanimn （HPGe） gamma spectrometer. By using KORIGEN software and MCNP Monte Carlo simulations, the single pebble gamma radiations to be recorded in the detector are simulated under different, irradiation histories. A specially developed algorithm is applied to analyze the generated spectra to reconstruct the gamma activity of the ~arCs monitoring nuclide. It is demonstrated that by taking into account the intense interfering peaks, the 137Cs activity in the spent pebbles can be derived with a standard deviation of 3.0% （l（r）. The results support the feasibility of utilizing the HPGe spectrometry in the online determination of the pebble burimp in future modular pebble bed reactors.

EFFECTS OF COOLED EXTERNAL EXHAUST GAS RECIRCULATION ON DIESEL HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE

The effects of cooled external exhaust gas recirculation （EGR） on the combustion and emission performance of diesel fuel homogeneous charge compression ignition （HCCI） are studied. Homogeneous mixture is formed by injecting fuel in-cylinder in the negative valve overlap （NVO） period. So, the HCCI combustion which has low NOx and smoke emission is achieved. Cooled external EGR can delay the start of combustion effectively, which is very useful for high cetane fuel （diesel） HCCI, because these fuels can easily self-ignition, which makes the start of combustion more early. External EGR can avoid the knock combustion of HCCI at high load which means that the EGR can expand the high load limit. HCCI maintains low smoke emission at various EGR rate and various load compared with conventional diesel engine because there is no fuel-rich area in cylinder.

Application of difference arithmetic in the continuous annealing process line cooling control at Baosteel

Some of the main cooling processes and equipment that are currently being used in the continuous annealing process line （CAPL） at Baosteel are introduced, as well as their cooling control model techniques, the modeling principium and their application results. With charts indicating the control trends in real processes, the powerful adjusting ability of the control models with process variable differences and their excellent control precision are shown in this study.

Gas film/regenerative composite cooling characteristics of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine

The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber was investigated.A gas film/regenerative composite cooling model was developed based on the Grisson gas film cooling efficiency formula and the one-dimensional regenerative cooling model.The accuracy of the model was validated through experiments conducted on a 6 kg/s level gas film/regenerative composite cooling thrust chamber.Additionally,key parameters related to heat transfer performance were calculated.The results demonstrate that the model is sufficiently accurate to be used as a preliminary design tool.The temperature rise error of the coolant,when compared with the experimental results,was found to be less than 10%.Although the pressure drop error is relatively large,the calculated results still provide valuable guidance for heat transfer analysis.In addition,the performance of composite cooling is observed to be superior to regenerative cooling.Increasing the gas film flow rate results in higher cooling efficiency and a lower gas-side wall temperature.Furthermore,the position at which the gas film is introduced greatly impacts the cooling performance.The optimal introduction position for the gas film is determined when the film is introduced from a single row of holes.This optimal introduction position results in a more uniform wall temperature distribution and reduces the peak temperature.Lastly,it is observed that a double row of holes,when compared to a single row of holes,enhances the cooling effect in the superposition area of the gas film and further lowers the gas-side wall temperature.These results provide a basis for the design of gas film/regenerative composite cooling systems.

A review of TRISO-coated particle nuclear fuel performance models

The success of high temperature gas cooled reactor depends upon the safety and quality of the coated particle fuel. The understanding and evaluation of this fuel requires the development of an integrated mechanistic fuel performance model that fully describes the mechanical and physicochemical behavior of the fuel particle under irradiation. In this paper, a review of the analytical capability of some of the existing computer codes for coated particle fuel was performed. These existing models and codes include FZJ model, JAERI model, Stress3 model, ATLAS model, PARFUME model and TIMCOAT model. The theoretic model, methodology, calculation parameters and benchmark of these codes were classified. Based on the failure mechanism of coated particle, the advantage and limits of the models were compared and discussed. The calculated results of the coated particles for China HTR-10 by using some existing code are shown. Finally, problems and challenges in fuel performance modeling were listed.

A mixed-ligand approach for a gigantic and hollow heterometallic cage {Ni_(64)Gd_(96)} for gas separation and magnetic cooling applications

Subject Code:E01With the support of the National Natural Science Foundation of China,the research team led by Prof.Zheng Yanzhan(郑彦臻)at the Frontier Institute of Science and Technology,Xi'an Jiaotong University,recently reported a gigantic rare-earth transition metal cuboidal hollow cluster {Ni_(64)Gd_(96)}that exhibits high selectivity for absorbing CO_2over CH_4or N_2at room temperature and large magnetocaloric effects at

Saturated absorption spectroscopy of buffergas-cooled Barium monofluoride molecules

We report an experimental investigation on the Doppler-free saturated absorption spectroscopy of buffer-gas-cooled Barium monofluoride(BaF)molecules in a 4 K cryogenic cell.The obtained spectra with a resolution of 19 MHz,much smaller than previously observed in absorption spectroscopy,clearly resolve the hyperfine transitions.Moreover,we use these high-resolution spectra to fit the hyperfine splittings of excited A(v=0)state and find the hyperfine splitting of the laser-cooling-relevant A^(2)Π_(1/2)(v=0,J=1/2,+)state is about 18 MHz,much higher than the previous theoretically predicted value.This provides important missing information for laser cooling of BaF molecules.

LD-pumped gas-cooled multislab Nd:glass laser amplification to joule level

We demonstrate a laser diode end-pumped helium gas-cooled multislab Nd:glass laser amplifier. The design and thermal management of the proposed laser amplifier are discussed. The thermally induced wavefront aberration of the slabs was also measured and compared with simulation results. A small-signal single-pass longitudinal gain of 1.8 was measured with a pump energy of 7.3 J. With an injected seed energy of 0.6 m J, the output energy from the amplifier reached 0.5 J at 0.2 Hz and 0.43 J at 0.5 Hz in a multipass extraction geometry, thus demonstrating the feasibility of diode-pumped,high-energy lasers with direct gas cooling.

Distribution of reformed coke oven gas in a shaft furnace

In recent years, the reformed coke oven gas (COG) was proposed to be used as reducing gas in a shaft furnace. A mathematical model of gas flow based on the reformed COG was built. The effects of the pressure ratio of reducing gas to cooling gas (k) on the gas distribution in the shaft furnace were investigated. The calculation results show that k is an important operation parameter, which can obviously affect the gas distribution in the shaft furnace. The value of k should be compromised. Both too big and too small k values are not appropriate, and the most reasonable value for k is 1:1.33.Under this condition, the utilization coefficient of reducing gas, the utilization coefficient of cooling gas and the coefficient of upward gas are 0.94, 0.92 and 1.03, respectively. Based on the validation of physical experiments, the calculated values of the model agreed well with the physical experimental data. Thus, the established model can properly describe the reformed COG distribution in an actual shaft furnace.

Conjugate Heat Transfer Investigation on the Cooling Performance of Air Cooled Turbine Blade with Thermal Barrier Coating

A hot wind tunnel of annular cascade test rig is established for measuring temperature distribution on a real gas turbine blade surface with infrared camera.Besides,conjugate heat transfer numerical simulation is performed to obtain cooling efficiency distribution on both blade substrate surface and coating surface for comparison.The effect of thermal barrier coating on the overall cooling performance for blades is compared under varied mass flow rate of coolant,and spatial difference is also discussed.Results indicate that the cooling efficiency in the leading edge and trailing edge areas of the blade is the lowest.The cooling performance is not only influenced by the internal cooling structures layout inside the blade but also by the flow condition of the mainstream in the external cascade path.Thermal barrier effects of the coating vary at different regions of the blade surface,where higher internal cooling performance exists,more effective the thermal barrier will be,which means the thermal protection effect of coatings is remarkable in these regions.At the designed mass flow ratio condition,the cooling efficiency on the pressure side varies by 0.13 for the coating surface and substrate surface,while this value is 0.09 on the suction side.

Self-acting Afterheat Removal in High Temperature Gas Cooled Reactors

Much more nuclear energy capacity is needed than currently installed to meet the demand of energy and the requirement on environment protection in the next decades. More stringent nuclear safety standards have to be established for future nuclear power plants.The philosophy of a catastrophe free nuclear technology is presented in this paper. The issue of afterheat removal of high temperature gas cooled reactors is handled.It is a striking inherent safety feature of the modular high temperature gas cooled reactor design that the afterheat removal takes place without any active core cooling systems.

An Experimental Investigation of Heat Transfer Characteristics for Steam Cooling in a Rectangular Channel with Parallel Ribs

An experimental study of heat transfer characteristics in superheated steam cooled rectangular channels with parallel ribs was conducted.The distribution of the heat transfer coefficient on the rib-roughed channel was measured by IR camera.The blockage ratio(e/Dh) of the tested channel is 0.078 and the aspect ratio(W/H) is fixed at3.0.Influences of the rib pitch-to-height ratio(P/e) and the rib angle on heat transfer for steam cooling were investigated.In this paper,the Reynolds number(Re) for steam ranges from 3070 to 14800,the rib pitch-to-height ratios were 8,10 and 12,and rib angles were 90°,75°,60°,and 45°.Based on results above,we have concluded that:In case of channels with 90° tranverse ribs,for larger rib pitch models(the rib pitch-to-height ratio=10 and12),areas with low heat transfer coefficient in front of rib is larger and its minimum is lower,while the position of the region with high heat transfer coefficient nearly remains the same,but its maximun of heat transfer coefficient becomes higher.In case of channels with inclined ribs,heat transfer coefficients on the surface decrease along the direction of each rib and show an apparent nonuniformity,consequently the regions with low Nusselt number values closely following each rib expand along the aforementioned direction and that of relative high Nusselt number values vary inversely.For a square channel with 90° ribs at Re= 14800,wider spacing rib configurations(the rib pitch-to-height ratio=10 and 12) give an area-averaged heat transfer on the rib-roughened surface about8.4%and 11.4%more than P/e=8 model,respectively;for inclined parallel ribs with different rib angles at Re=14800,the area-averaged heat transfer coefficients of 75°,60° and 45° ribbed surfaces increase by 20.1%,42.0%and 44.4%in comparison with 90° rib angle model.45° angle rib-roughened channel leads to a maximal augmentation of the area-averaged heat transfer coefficient in all research objects in this paper.

Characteristics of Bi-2223 HTS Tapes Under Short-Circuit Current Impacts in Hybrid Energy Transmission Pipelines

A hybrid energy transmission pipeline is proposed with the aim of long-distance cooperative transmission of electricity and chemical fuels, which is composed of an inner high-temperature superconducting (HTS) power cable and outer liquefied natural gas (LNG) pipeline. The flowing LNG could maintain the operating temperature of the inner HTS power cable within the range of 85 K-90 K, thus the Bi-2223 superconductors in the HTS power cable produce little Joule loss with the transmission current below the critical current. Owing to the advantages of high power density, low transmission losses and economical manufacturing costs, the hybrid energy transmission pipeline is expected to be widely utilized in the near future. In order to ensure the safety of the HTS power cable and explosive LNG in case of short-circuit faults, this paper tests and analyzes the characteristics of Bi-2223 HTS tapes of the Type HT-CA, Type HT-SS and Type H models under short-circuit current impacts at the LNG cooling temperature (85 K-90 K). An experimental platform is designed and established for the ampacity tests of HTS tapes above LN2 cooling temperature (77 K). The AC over-current impact tests at 85 K-90 K are carried out on each sample of Bi-2223 tapes respectively, and the experimental results are analyzed and compared to evaluate their performances under different operating conditions. The results indicate that the Type HT-CA tape can withstand 50 Hz short-circuit current impact with the amplitude of 1108 A (10 times of critical current Ic ) for 100 ms at 90 K, and its resistance is the smallest of the three tested samples under similar current impacts. Therefore, the Type HT-CA Bi-2223 tape is the optimal superconductor of the HTS power cable in the hybrid energy transmission pipeline.

A Numerical Model of Heating and Cooling Cycles to Study the Driven Response for Twisted and Coiled Polymer Actuator

Twisted and coiled polymer actuator(TCPA)is a type of artificial muscle that can be driven by heating due to its structure.A key issue with TCPA performance is the low driven frequency due to slow heat transfer in heating and cooling cycles,especially during cooling.We developed a numerical model of coating heating and nitrogen gas cooling that can effectively improve the driven forces and frequencies of the TCPA.Results indicate that natural cooling and electric fan cooling modes used in many experiments cannot restore the TCPA to its initial configuration when driven frequencies are high.Nitrogen gas cooling,at high driven frequencies,can fully restore the TCPA to its initial configuration,which is crucial for maintaining artificial muscle flexibility.In addition,as driven frequency increases,the corresponding driven force decreases.Systematic parametric studies were carried out to provide inspirations for optimizing TCPA design.The integrative computational study presented here provides a fundamental mechanistic understanding of the driven response in TCPA and sheds light on the rational design of TCPA through changing cooling modes.

Pushing the boundaries of diode-pumped solid-state lasers for high-energy applications

We report on the successful demonstration of a 150 J nanosecond pulsed cryogenic gas cooled,diode-pumped multi-slab Yb:YAG laser operating at 1 Hz.To the best of our knowledge,this is the highest energy ever recorded for a diodepumped laser system.

Two Phase Flow Stability in the HTR-10 Steam Generator

A 10MW High Temperature Gas Cooled Reactor (HTR-10) designed by the Institute of Nuclear Energy Technology (INET) is now being constructed. The steam generator (SG) in the HTR-10 is one of the most important components for reactor safety. The thermal-hydraulic performance of the SG was investigated. A full scale HTR-10 Steam Generator Two Tube Engineering Model Test Facility (SGTM-10) was installed and tested at INET. This paper describes the SGTM-10 thermal hydraulic experimental system in detail. The SGTM-10 simulates the actual thermal and structural parameters of the HTR-10. The SGTM-10 includes three separated loops: the primary helium loop, the secondary water loop, and the tertiary cooling water loop. Two parallel tubes are arranged in the test assembly. The main experimental equipment is shown in the paper. Expermental results are given illustrating the effects of the outlet pressures, the heating power, and the inlet subcooling.