Harmonic Resonance Analysis of Shale Gas Distribution Network with Phased Load

Based on the background of achieving carbon peaking and carbon neutrality, the development and application of new high-power compressors, electric grid drilling RIGS and electric fracturing pump system provide new equipment support for the electric, green and intelligent development of shale gas fields in China. However, the harmonic pollution of shale gas grid becomes more serious due to the converter and frequency conversion device in the system, which easily causes harmonic resonance problem. Therefore, the harmonic resonance of shale gas grid is comprehensively analyzed and treated. Firstly, the working mechanism of compressor, electric drilling RIGS of the harmonic impedance model of electric fracturing pump system is established. Secondly, the main research methods of harmonic resonance analysis are introduced, and the basic principle of modal analysis is explained. Modal analysis method was used to analyze. Finally, harmonic resonance is suppressed. The results show that there may be multiple resonant frequency points in the distribution network changes, but these changes are relatively clear;if the original resonant frequency point of the resonant loop does not exist, the resonant frequency point disappears. The optimal configuration strategy of passive filter can effectively suppress harmonic resonance of distribution network in shale gas field.

Distribution characteristics, exploration and development, geological theories research progress and exploration directions of shale gas in China

The shale gas resources in China have great potential and the geological resources of shale gas is over 100×10^(12)m^(3),which includes about 20×10^(12)m^(3) of recoverable resources.Organic-rich shales can be divided into three types according to their sedimentary environments,namely marine,marine-continental transitional,and continental shales,which are distributed in 13 stratigraphic systems from the Mesoproterozoic to the Cenozoic.The Sichuan Basin and its surrounding areas have the highest geological resources of shale gas,and the commercial development of shale gas has been achieved in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation in these areas,with a shale gas production of up to 20×10^(9)m^(3) in 2020.China has seen rapid shale gas exploration and development over the last five years,successively achieving breakthroughs and important findings in many areas and strata.The details are as follows.(1)Large-scale development of middle-shallow shale gas(burial depth:less than 3500 m)has been realized,with the productivity having rapidly increased;(2)breakthroughs have been constantly made in the development of deep shale gas(burial depth:3500-4500 m),and the ultradeep shale gas(burial depth:greater than 4500 m)is under testing;(3)breakthroughs have been made in the development of normal-pressure shale gas,and the assessment of the shale gas in complex tectonic areas is being accelerated;(4)shale gas has been frequently discovered in new areas and new strata,exhibiting a great prospect.Based on the exploration and development practice,three aspects of consensus have been gradually reached on the research progress in the geological theories of shale gas achieved in China.(1)in terms of deep-water fine-grained sediments,organic-rich shales are the base for the formation of shale gas;(2)in terms of high-quality reservoirs,the development of micro-nano organic matter-hosted pores serves as the core of shale gas accumulation;(3)in terms of preservation conditions,weak structural transformation,a moderate degree of thermal evolution,and a high pressure coefficient are the key to shale gas enrichment.As a type of important low-carbon fossil energy,shale gas will play an increasingly important role in achieving the strategic goals of peak carbon dioxide emissions and carbon neutrality.Based on the in-depth study of shale gas geological conditions and current exploration progress,three important directions for shale gas exploration in China in the next five years are put forward.

Formation and distribution characteristics of Proterozoic–Lower Paleozoic marine giant oil and gas fields worldwide

There are rich oil and gas resources in marine carbonate strata worldwide.Although most of the oil and gas reserves discovered so far are mainly distributed in Mesozoic,Cenozoic,and upper Paleozoic strata,oil and gas exploration in the Proterozoic–Lower Paleozoic（PLP）strata—the oldest marine strata—has been very limited.To more clearly understand the oil and gas formation conditions and distributions in the PLP marine carbonate strata,we analyzed and characterized the petroleum geological conditions,oil and gas reservoir types,and their distributions in thirteen giant oil and gas fields worldwide.This study reveals the main factors controlling their formation and distribution.Our analyses show that the source rocks for these giant oil and gas fields are mainly shale with a great abundance of type I–II organic matter and a high thermal evolution extent.The reservoirs are mainly gas reservoirs,and the reservoir rocks are dominated by dolomite.The reservoir types are mainly karst and reef–shoal bodies with well-developed dissolved pores and cavities,intercrystalline pores,and fractures.These reservoirs arehighly heterogeneous.The burial depth of the reservoirs is highly variable and somewhat negatively correlated to the porosity.The cap rocks are mainly thick evaporites and shales,with the thickness of the cap rocks positively correlated to the oil and gas reserves.The development of high-quality evaporite cap rock is highly favorable for oil and gas preservation.We identified four hydrocarbon generation models,and that the major source rocks have undergone a long period of burial and thermal evolution and are characterized by early and long periods of hydrocarbon generation.These giant oil and gas fields have diverse types of reservoirs and are mainly distributed in paleo-uplifts,slope zones,and platform margin reef-shoal bodies.The main factors that control their formation and distribution were identified,enabling the prediction of new favorable areas for oil and gas exploration.

Distribution Characteristics and Accumulation Model for the Coal-formed Gas Generated from Permo-Carboniferous Coal Measures in Bohai Bay Basin, China: A Review

Coal-formed gas generated from the Permo-Carboniferous coal measures has become one of the most important targets for deep hydrocarbon exploration in the Bohai Bay Basin,offshore eastern China.However,the proven gas reserves from this source rock remain low to date,and the distribution characteristics and accumulation model for the coal-formed gas are not clear.Here we review the coal-formed gas deposits formed from the Permo-Carboniferous coal measures in the Bohai Bay Basin.The accumulations are scattered,and dominated by middle-small sized gas fields,of which the proven reserves ranging from 0.002 to 149.4×108 m3 with an average of 44.30×108 m3 and a mid-point of 8.16×108 m3.The commercially valuable gas fields are mainly found in the central and southern parts of the basin.Vertically,the coal-formed gas is accumulated at multiple stratigraphic levels from Paleogene to Archaeozoic,among which the Paleogene and PermoCarboniferous are the main reservoir strata.According to the transporting pathway,filling mechanism and the relationship between source rocks and reservoir,the coal-formed gas accumulation model can be defined into three types:"Upward migrated,fault transported gas"accumulation model,"Laterally migrated,sandbody transported gas"accumulation model,and"Downward migrated,sub-source,fracture transported gas"accumulation model.Source rock distribution,thermal evolution and hydrocarbon generation capacity are the fundamental controlling factors for the macro distribution and enrichment of the coal-formed gas.The fault activity and the configuration of fault and caprock control the vertical enrichment pattern.

Paleozoic Composite Petroleum System of North Africa:Hydrocarbon Distribution and Main Controlling Factors

North Africa, which is one of the main oil and gas producing regions in the world, is best known for its subsalt Paleozoic-Triassic reservoirs and Paleozoic source rocks. Hydrocarbon abundance varies greatly from one structural domain to another areally and from one stratigraphic interval to another vertically. Analyses of the essential elements and geological processes of the Paleozoic petroleum system indicate that the distribution of the Lower Silurian shale source rocks, the development of a thick Mesozoic overburden, the presence of the Upper Triassic-Lower Jurassic evaporite seal are the most important factors goveming the distribution of the Paleozoic-sourced hydrocarbons in North Africa. The Mesozoic sequence plays a critical role for hydrocarbons to accumulate by enabling the maturation of the Paleozoic source rocks during the Mesozoic-Paleogene times and preserving the accumulated hydrocarbons. Basins and surrounding uplifts, particularly the latter, with a thick Mesozoic sequence and a regional evaporite seal generally have abundant hydrocarbons. Basins where only a thin Mesozoic overburden was developed tend to have a very poor to moderate hydrocarbon prospectivity.

A three dimensional visualized physical simulation for natural gas charging in the micro-nano pore system

A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to investigate laws of gas and water flow and their distribution, and controlling factors during the gas charging process in low-permeability(tight) sandstone reservoir. By describing features of gas-water flow and distribution and their variations in the micro-nano pore system, it is found that the gas charging in the low permeability(tight) sandstone can be divided into two stages, expansion stage and stable stage. In the expansion stage, the gas flows continuously first into large-sized pores then small-sized pores, and first into centers of the pores then edges of pores;pore-throats greater than 20 μm in radius make up the major pathway for gas charging. With the increase of charging pressure, movable water in the edges of large-sized pores and in the centers of small pores is displaced out successively. Pore-throats of 20-50 μm in radius and pore-throats less than 20 μm in radius dominate the expansion of gas charging channels at different stages of charging in turn, leading to reductions in pore-throat radius, throat length and coordination number of the pathway, which is the main increase stage of gas permeability and gas saturation. Among which, pore-throats 30-50 μm in radius control the increase pattern of gas saturation. In the stable stage, gas charging pathways have expanded to the maximum, so the pathways keep stable in pore-throat radius, throat length, and coordination number, and irreducible water remains in the pore system, the gas phase is in concentrated clusters, while the water phase is in the form of dispersed thin film, and the gas saturation and gas permeability tend stable. Connected pore-throats less than 20 μm in radius control the expansion limit of the charging pathways, the formation of stable gas-water distribution, and the maximum gas saturation. The heterogeneity of connected pore-throats affects the dynamic variations of gas phase charging and gas-water distribution. It can be concluded that the pore-throat configuration and heterogeneity of the micro-nanometer pore system control the dynamic variations of the low-permeability(tight) sandstone gas charging process and gas-water distribution features.

Creation and Evaluation of Construction Guidelines Using CFD for Low Pressure Plasma Gas Feed-in Systems to Homogenize the Precursor Gas Flow

The local gas-flow behavior is almost unknown for low pressure plasma systems, except parallel plate reactors for semiconductor purposes. To overcome this lack of knowledge, this study starts with the influence investigation of the gas feed-in systems technical layout on the homogeneity of the gas supply for large volume plasma enhanced chemical vapor deposition (PECVD) chambers. Computational fluid dynamics (CFD) simulations are used as a tool to determine velocity and pressure distribution inside the gas feed-in pipe as well as in the PECVD-chamber itself. The parameters varied were: flow rate, pipe length, number of holes, hole diameter and aspect ratio of the pipe section. The calculated pressure values are compared with the experimentally measured ones to validate the simulation results. An excellent conformity of the calculated and measured pressures is observed. With the aim to evaluate the homogeneity of gas distribution through the pipe holes the nonuniformity coefficient (Φ) was created. The results show the influence of each layout parameter in the homogeneity of the gas distribution. Hence in future correct technical layouts of gas feed-in systems can easily be applied. With these results construction guidelines has been formulated.

Study on the Two-Dimensional Density Distribution for Gas Plasmas Driven by Laser Pulse

We perform an experimental study of two-dimensional（2D） electron density profiles of the laser-induced plasma plumes in air by ordinarily laboratorial interferometry. The electron density distributions measured show a feature of hollow core. To illustrate the feature, we present a theoretical investigation by using dynamics analysis. In the simulation, the propagation of laser pulse with the evolution of electron density is utilized to evaluate ionization of air target for the plasma-formation stage. In the plasma-expansion stage, a simple adiabatic fluid dynamics is used to calculate the evolution of plasma outward expansion. The simulations show good agreements with experimental results, and demonstrate an effective way of determining 2D density profiles of the laser-induced plasma plume in gas.

The gradual subduction-collision evolution model of Proto-South China Sea and its control on oil and gas

This study involved outcrop,drilling,seismic,gravity,and magnetic data to systematically document the geological records of the subduction process of Proto-South China Sea(PSCS)and establish its evolution model.The results indicate that a series of arc-shaped ophiolite belts and calcalkaline magmatic rocks are developed in northern Borneo,both of which have the characteristics of gradually changing younger from west to east,and are direct signs of subduction and collision of PSCS.At the same time,the subduction of PSCS led to the formation of three accretion zones from the south to the north in Borneo,the Kuching belt,Sibu belt,and Miri belt.The sedimentary formation of northern Borneo is characterized by a three-layer structure,with the oceanic basement at the bottom,overlying the deep-sea flysch deposits of the Rajang–Crocker group,and the molasse sedimentary sequence that is dominated by river-delta and shallow marine facies at the top,recording the whole subduction–collision–orogeny process of PSCS.Further,seismic reflection and tomography also confirmed the subduction and collision of PSCS.Based on the geological records of the subduction and collision of PSCS,combined with the comprehensive analysis of segmented expansion and key tectonic events in the South China Sea,we establish the“gradual”subduction-collision evolution model of PSCS.During the late Eocene to middle Miocene,the Zengmu,Nansha,and Liyue–Palawan blocks were separated by West Baram Line and Balabac Fault,which collided with the Borneo block and Kagayan Ridge successively from the west to the east,forming several foreland basin systems,and PSCS subducted and closed from the west to the east.The subduction and extinction of PSCS controlled the oil and gas distribution pattern of southern South China Sea(SSCS)mainly in three aspects.First,the“gradual”closure process of PSCS led to the continuous development of many large deltas in SSCS.Second,the deltas formed during the subduction–collision of PSCS controlled the development of source rocks in the basins of SSCS.Macroscopically,the distribution and scale of deltas controlled the distribution and scale of source rocks,forming two types of source rocks,namely,coal measures and terrestrial marine facies.Microscopically,the difference of terrestrial higher plants carried by the delta controlled the proportion of macerals of source rocks.Third,the difference of source rocks mainly controlled the distribution pattern of oil and gas in SSCS.Meanwhile,the difference in the scale of source rocks mainly controlled the difference in the amount of oil and gas discoveries,resulting in a huge amount of oil and gas discoveries in the basin of SSCS.Meanwhile,the difference of macerals of source rocks mainly controlled the difference of oil and gas generation,forming the oil and gas distribution pattern of“nearshore oil and far-shore gas”.

Distribution and Development of Unconventional Gas in China

China is abundant in unconventional gas, and stunning growth of gas reserves and production therefore can be expected in foreseeable future because of the exploration and development of the gas. For the next 5 to 10 years, conventional gas will still dominate energy market but in a long run, its influence will weaken gradually as unconventional gas kicks in and expands. Though the exploration and development of unconventional gas in China is still at a very early stage, three Chinese oil majors have already assessed the resources, including tight gas, coal-bed methane, shale gas and gas hydrate.

Influence of Recirculated Flue Gas Distribution on Combustion and NOx Formation Characteristics in S-CO_(2) Coal-fired Boiler

Supercritical carbon dioxide(S-CO_(2))Brayton power cycle power generation technology,has attracted more and more scholars'attention in recent years because of its advantages of high efficiency and flexibility.Compared with conventional steam boilers,S-CO_(2) has different heat transfer characteristics,it is easy to cause the temperature of the cooling wall of the boiler to rise,which leads to higher combustion gas temperature in the furnace,higher NOX generation concentration.The adoption of flue gas recirculation has a significance impact on the combustion process of pulverized coal in the boiler,and it is the most effective ways to reduce the emission of NOX and the combustion temperature in the boiler.This paper takes 1000MW S-CO_(2) T-type coal-fired boiler as the research target to investigate the combustion and NOX generation characteristics of S-CO_(2) coal-fired boilers under flue gas recirculation condition,the influence of recirculated flue gas distribution along the furnace height on the characteristics of NOX formation and the combustion of pulverized coal.The results show that the recirculated flue gas distribution has the great impact on the concentration of NOX at the boiler outlet.When the bottom recirculation flue gas rate is gradually increased,the average temperature of the lower boiler decreases and the average temperature of the upper boiler increases slightly;The concentration of NOx at the furnace outlet increases.

Restoration of Eroded Thickness of the Neogene Strata in the Western Qaidam Basin and Its Significance for Oil and Gas Occurrence

During the Pleistocene, the western Qaidam Basin has largely experienced strong structural reconstruction and strong erosion. First, the eroded thickness of Neogene strata was restored approximately by the stratigraphic profile comparison method and plane trend surface restoring method; then, accurate calculation of erosion was recovered using vitrinite reflectance, and the erosion that was restored by the trend surface restoring method was corrected; finally, a distribution map of cumulative erosion was produced. This study marks an important achievement in that one of the most important parameters of basin tectonic evolution, sedimentary evolution, and oil and gas accumulation history has been obtained, and that a basic geological problem has been solved in the Qaidam Basin. The areas with high erosion and low erosion are shown in the map and a close relation between the distribution of oil and gas fields and erosion was recognized. Large and medium oil and gas fields are mainly distributed in areas with medium and low erosion. It is difficult to form large-scale oil and gas accumulation in areas in which erosion is more than 2000 m. The mechanism of the relation between oil and gas distribution and erosion is explained. This study will be of use in predicting the distribution of oil and gas.

20 ppm Anhydrous Ammonia Odor Agent Proposed for Hydrogen Fuel for Safe Detection of Leaks

Preferably 20 ppm anhydrous ammonia (NH3) is proposed to be added to hydrogen fuel (H) made from renewable energy sources (green hydrogen), so that H leaks may be easily detectable by smell, but not dangerously toxic. Including this odor agent, would allow H to be distributed safely in pipes, as required by law, and it would allow H to be safely stored, transported, and exported for sale, and widely commercialized. Further research is suggested to identify optimum pressure, temperature, and automated technique for injecting NH3 into H, and to chart the minimum concentration needed, as a function of temperature and humidity. An application to make hypersonic H burning aircraft safer for ground maintenance crews is proposed. An ability to make, store and distribute H, made from local sources of renewable energy, would reduce a need for fossil fuels, especially in poor, remote communities, where it could improve their economy by creating an export product for sale, while reducing pollution.

Experimental characterization and CFD simulation of gas maldistribution in turbulent fluidization of Group A particles

The study presented hereby investigates experimentally and with CFD simulations the gas distribution effect on the hydrodynamic of a Geldart Group A turbulent fluidized bed. Experiments were carried out on a cold flow fluidized bed column with an even and uneven gas distribution. Local solid volume fraction profiles were measured using optical probes at different bed heights and along two radial directions. Optical probe measurements allow catching a clear hydrodynamic difference between both even and uneven gas distributions. These results were then used to assess CFD simulations with the code Barracuda^(TM) (MP-PIC approach). It is noteworthy that the choice of drag correlation and boundary conditions strongly influences the agreement between the experimental and CFD results. Once the correct parameters are chosen, CFD simulations captured the effect of gas distribution changes.

Construction of Non-Equilibrium Gas Distribution Functions through Expansions in Peculiar Velocity Space

Gas distribution function plays a crucial role in the description of gas flows at the mesoscopic scale.In the presence of non-equilibrium flow,the distribution function loses its rotational symmetricity,making the mathematical derivation difficult.From both the Chapman-Enskog expansion and the Hermite polynomial expansion(Grad’s method),we observe that the non-equilibrium effect is closely related to the peculiar velocity space(C).Based on this recognition,we propose a new methodology to construct the non-equilibrium distribution function from the perspective of polynomial expansion in the peculiar velocity space of molecules.The coefficients involved in the non-equilibrium distribution function can be exactly determined by the compatibility conditions and the moment relationships.This new framework allows constructing non-equilibrium distribution functions at any order of truncation,and the ones at the third and the fourth order have been presented in this paper for illustration purposes.Numerical validations demonstrate that the new method is more accurate than the Grad’s method at the same truncation error for describing non-equilibrium effects.Two-dimensional benchmark tests are performed to shed light on the applicability of the new method to practical engineering problems.

Active-reactive power scheduling of integrated electricity-gas network with multi-microgrids

Advances in natural gas-fired technologies have deepened the coupling between electricity and gas networks,promoting the development of the integrated electricity-gas network(IEGN)and strengthening the interaction between the active-reactive power flow in the power distribution network(PDN)and the natural gas flow in the gas distribution network(GDN).This paper proposes a day-ahead active-reactive power scheduling model for the IEGN with multi-microgrids(MMGs)to minimize the total operating cost.Through the tight coupling relationship between the subsystems of the IEGN,the potentialities of the IEGN with MMGs toward multi-energy cooperative interaction is optimized.Important component models are elaborated in the PDN,GDN,and coupled MMGs.Besides,motivated by the non-negligible impact of the reactive power,optimal inverter dispatch(OID)is considered to optimize the active and reactive power capabilities of the inverters of distributed generators.Further,a second-order cone(SOC)relaxation technology is utilized to transform the proposed active-reactive power scheduling model into a convex optimization problem that the commercial solver can directly solve.A test system consisting of an IEEE-33 test system and a 7-node natural gas network is adopted to verify the effectiveness of the proposed scheduling method.The results show that the proposed scheduling method can effectively reduce the power losses of the PDN in the IEGN by 9.86%,increase the flexibility of the joint operation of the subsystems of the IEGN,reduce the total operation costs by $32.20,and effectively enhance the operation economy of the IEGN.

Mathematical Simulation of Burden Distribution in COREX Melter Gasifier by Discrete Element Method

COREX process is one of the earliest industrialized smelting reduction ironmaking technology.A numerical simulation model based on discrete element method ( DEM ) has been developed to analyze the burden distribution in the melter gasifier of COREX process.The DEM considering the collisions between particles can directly reproduce the charging process.The burden trajectory , the location and the burden surface profile are analyzed in melter gasifier with a mixing charging of coal and direct reduction iron ( DRI ) at the same time.Considering the porosity of packed bed has an important effect on the gas flow distribution of melter gasifier , a method to calculate porosity has been proposed.The distribution of DRI and coal and the porosity in the radial direction are given under different charging patterns , which is necessary to judge the gas flow distribution and provide base data for further researching the melter gasifier for the next work in the future.The research results can be used to guide the operation of adjusting charging and provide important basis for optimizing the charging patterns in order to obtain the reasonable gas distribution.

Distribution of reformed coke oven gas in a shaft furnace

In recent years, the reformed coke oven gas (COG) was proposed to be used as reducing gas in a shaft furnace. A mathematical model of gas flow based on the reformed COG was built. The effects of the pressure ratio of reducing gas to cooling gas (k) on the gas distribution in the shaft furnace were investigated. The calculation results show that k is an important operation parameter, which can obviously affect the gas distribution in the shaft furnace. The value of k should be compromised. Both too big and too small k values are not appropriate, and the most reasonable value for k is 1:1.33.Under this condition, the utilization coefficient of reducing gas, the utilization coefficient of cooling gas and the coefficient of upward gas are 0.94, 0.92 and 1.03, respectively. Based on the validation of physical experiments, the calculated values of the model agreed well with the physical experimental data. Thus, the established model can properly describe the reformed COG distribution in an actual shaft furnace.