Experimental Investigation on Condensate Revaporization During Gas Injection Development in Fractured Gas Condensate Reservoirs

The gas field in the Bohai Bay Basin is a fractured metamorphic buried-hill reservoir with dual-media characteristics. The retrograde vaporization mechanism observed in this type of gas condensate reservoir differs significantly from that observed in sand gas condensate reservoirs. However, studies on improving the recovery of fractured gas condensate reservoirs are limited;thus, the impact of retrograde vaporization on condensate within fractured metamorphic buried-hill reservoirs remains unclear. To address this gap, a series of gas injection experiments are conducted in pressure-volume-temperature(PVT) cells and long-cores to investigate the retrograde vaporization effect of condensate using different gas injection media in fractured gas condensate reservoirs. We analyze the variation in condensate volume, gas-to-oil ratio, and condensate recovery during gas injection and examine the influence of various gas injection media(CO_(2), N_(2), and dry gas) under different reservoir properties and varying gas injection times. The results demonstrate that the exchange of components between injected gas and condensate significantly influences condensate retrograde vaporization in the formation. Compared with dry gas injection and N_(2) injection,CO_(2) injection exhibits a superior retrograde vaporization effect. At a CO_(2) injection volume of 1 PV, the percentage shrinkage volume of condensate is 13.82%. Additionally, at the maximum retrograde condensation pressure, CO_(2) injection can increase the recovery of condensate by 22.4%. However, the condensate recovery is notably lower in fractured gas condensate reservoirs than in homogeneous reservoirs, owing to the creation of dominant gas channeling by fractures, which leads to decreased condensate recovery. Regarding gas injection timing, the effect of gas injection at reservoir pressure on improving condensate recovery is superior to that of gas injection at the maximum retrograde condensation pressure. This research provides valuable guidance for designing gas injection development plans and dynamic tracking adjustments for fractured gas condensate reservoirs.

Hydrocarbon gas huff-n-puff optimization of multiple horizontal wells with complex fracture networks in the M unconventional reservoir

The oil production of the multi-fractured horizontal wells(MFHWs) declines quickly in unconventional oil reservoirs due to the fast depletion of natural energy. Gas injection has been acknowledged as an effective method to improve oil recovery factor from unconventional oil reservoirs. Hydrocarbon gas huff-n-puff becomes preferable when the CO_(2) source is limited. However, the impact of complex fracture networks and well interference on the EOR performance of multiple MFHWs is still unclear. The optimal gas huff-n-puff parameters are significant for enhancing oil recovery. This work aims to optimize the hydrocarbon gas injection and production parameters for multiple MFHWs with complex fracture networks in unconventional oil reservoirs. Firstly, the numerical model based on unstructured grids is developed to characterize the complex fracture networks and capture the dynamic fracture features.Secondly, the PVT phase behavior simulation was carried out to provide the fluid model for numerical simulation. Thirdly, the optimal parameters for hydrocarbon gas huff-n-puff were obtained. Finally, the dominant factors of hydrocarbon gas huff-n-puff under complex fracture networks are obtained by fuzzy mathematical method. Results reveal that the current pressure of hydrocarbon gas injection can achieve miscible displacement. The optimal injection and production parameters are obtained by single-factor analysis to analyze the effect of individual parameter. Gas injection time is the dominant factor of hydrocarbon gas huff-n-puff in unconventional oil reservoirs with complex fracture networks. This work can offer engineers guidance for hydrocarbon gas huff-n-puff of multiple MFHWs considering the complex fracture networks.

Evaluation of Well Spacing for Primary Development of Fractured Horizontal Wells in Tight Sandstone Gas Reservoirs

Methods for horizontal well spacing calculation in tight gas reservoirs are still adversely affected by the complexity of related control factors,such as strong reservoir heterogeneity and seepage mechanisms.In this study,the stress sensitivity and threshold pressure gradient of various types of reservoirs are quantitatively evaluated through reservoir seepage experiments.On the basis of these experiments,a numerical simulation model(based on the special seepage mechanism)and an inverse dynamic reserve algorithm(with different equivalent drainage areas)were developed.The well spacing ranges of Classes I,II,and III wells in the Q gas field are determined to be 802–1,000,600–662,and 285–400 m,respectively,with their average ranges as 901,631,and 342.5 m,respectively.By considering both the pairs of parallel well groups and series well groups as examples,the reliability of the calculation results is verified.It is shown that the combination of the two models can reduce errors and provide accurate results.

Formation Mechanism of the Changxing Formation Gas Reservoir in the Yuanba Gas Field,Sichuan Basin,China

In a very gentle platform-margin paleogeographic environment, platform-margin reef flat facies carbonate reservoir rocks were developed in the Changxing Formation of Yuanba field. Later weak structural evolution and diagenetic evolution caused the Changxing Formation to form lithologic traps, with good reservoirs such as dissolved bioclastic dolostone and dissolved pore dolostone. The Changxing Formation gas reservoir is a pseudo-layered porous lithologic gas reservoir under pressure depletion drive, with high H2S and moderate CO2 contents. This paper predictes that the conducting system for the Changxing Formation gas reservoir is possibly composed of the pores and microfractures in the Changxing Formation reservoir, the top erosional surface of the Changxing Formation, as well as the micropores and microfractures in the underlying formations. The Changxing Formation reservoir has experienced 3 hydrocarbon charging stages. This paper suggests that diffusion is the major formation mechanism for this gas reservoir. In the Middle and Late Yanshanian, the Yuanba area entered the major gas charging stage. The gas migrated mainly through diffusion and with the assistance of seepage flow in small faults and microfractures from the source rocks and the other oil-bearing strata to the Changxing Formation carbonate reservoir rocks, forming lithologic gas pools. In the Himalayan Epoch, the lithologic traps were uplifted as a whole without strong modification or overlapping, and were favorable for gas preservation.

Genesis of the low-permeability reservoir bed of upper Triassic Xujiahe Formation in Xinchang gas field,western Sichuan Depression

The genesis of a reservoir is a result of the combined action of deposition, diagenesis, tectonic reworking, and interaction of rock and fluid and the evolutionary environment. We discuss the genetic and evolution mechanism of a low-permeability reservoir bed of the Xujiahe Formation in the western Sichuan Depression on the basis of the study of diagenesis, diagenetic reservoir facies and the diagenetic evolution sequence. The research indicated that this reservoir bed can be divided into five types of diagenetic reservoir facies, namely strong dissolution, chlorite-lined intergranular pores, compaction and pressure solution, carbonate cementation and secondary quartz increase. There are, however, just two diagenetic reservoir facies which provide low-permeability reservoir beds, namely strong dissolution and chlorite-lined intergranular pores. We also analyzed their diagenetic evolution sequences and the origin of the low-permeability reservoir bed. Besides, it was also indicated that the composition and structure of sandstones, types of sedimentary microfacies, diagenesis history as well as the tectonic reworking in later periods are the main factors controlling the formation of the low-permeability reservoir bed. The above- mentioned factors establish the foundation for the forecasting the distribution of high quality reservoir beds.

Pressure transient analysis of a finite-conductivity multiple fractured horizontal well in linear composite gas reservoirs

Faulted gas reservoirs are very common in reality,where some linear leaky faults divide the gas reservoir into several reservoir regions with distinct physical properties.This kind of gas reservoirs is also known as linear composite(LC)gas reservoirs.Although some analytical/semi-analytical models have been proposed to investigate pressure behaviors of producing wells in LC reservoirs based on the linear composite ideas,almost all of them focus on vertical wells and studies on multiple fractured horizontal wells are rare.After the pressure wave arrives at the leaky fault,pressure behaviors of multiple fractured horizontal wells will be affected by the leaky faults.Understanding the effect of leaky faults on pressure behaviors of multiple fractured horizontal wells is critical to the development design.Therefore,a semi-analytical model of finite-conductivity multiple fractured horizontal(FCMFH)wells in LC gas reservoirs is established based on Laplace-space superposition principle and fracture discrete method.The proposed model is validated against commercial numerical simulator.Type curves are obtained to study pressure characteristics and identify flow regimes.The effects of some parameters on type curves are discussed.The proposed model will have a profound effect on developing analytical/semi-analytical models for other complex well types in LC gas reservoirs.

Depositional and Diagenetic Controls on Sandstone Reservoirs with Low Porosity and Low Permeability in the Eastern Sulige Gas Field, China

In order to determine the genesis and the factors that control the low-porosity and low- permeability sandstone reservoirs in the eastern Sulige Gas Field in the Ordos Basin, systematic studies on the sedimentary facies and diagenesis were conducted by means of analysis of cores, thin sections, fluid inclusions, X-ray diffraction, cathode luminescence and scanning electron microscope. It was found that the sand bodies of the major gas reservoirs in the Shan1 section （P1S1） and the He8 section （P2H8） were formed during the Permian as sedimentary facies such as braided-channel bars, braided-river channels and point bars of a meandering river. Four types of diagenetic facies developed subsequently： in order from the best to the poorest properties these are type A （weak compaction, early calcite cement-chlorite film facies）, type B （moderate compaction, quartz overgrowth-feldspar corrosion-kaolinite filling facies）, type C （strong compaction, late calcite cement-quartz corrosion facies） and type D （matrix filling and strong compaction facies）. This diagenesis is undoubtedly the main reason for the poor reservoir properties of sandstone reservoirs, but the sedimentary facies are the underlying factors that greatly affect the diagenesis and thus the reservoir performance. Favorable diagenetic facies developed mainly in relatively small lithofacies such as braided-river channels, channel bars and point bars. The vertical distribution of the physical properties and the diagenetic facies of the reservoirs are related to the stratigraphic succession. Most of the sandstones between mudstones and thin beds of sandstone are unfavorable diagenetic facies. Analyses indicate that siliceous cementation can hardly be stopped by hydrocarbon filling. Authigenic chlorite could hardly protect the primary porosity. It not only occupies pore space, but also blocks pathways through sandstone reservoirs, so that it has significant influence on the permeability. Authigenic chlorite cannot be used as a marker for a specific sedimentary facies because it can be formed in different sedimentary facies, but it indicates high hydrodynamic conditions and presence of favorable reservoirs.

Three-Dimensional Modelling of a Multi-Layer Sandstone Reservoir： the Sebei Gas Field, China

Multi-layer sandstone reservoirs occur globally and are currently in international production. The 3D characteristics of these reservoirs are too complicated to be accurately delineated by general structural-facies-reservoir modelling. In view of the special geological features, such as the vertical architecture of sandstone and mudstone interbeds, the lateral stable sedimentation and the strong heterogeneity of reservoir poroperm and fluid distribution, we developed a new three-stage and six-phase procedure for 3D characterization of multi-layer sandstone reservoirs. The procedure comprises two-phase structural modelling, two-phase facies modelling and modelling of two types of reservoir properties. Using this procedure, we established models of the formation structure, sand body structure and microfacies, reservoir facies and properties including porosity, permeability and gas saturation and provided a 3D fine-scale, systematic characterization of the Sebei multi-layer sandstone gas field, China. This new procedure, validated by the Sebei gas field, can be applied to characterize similar multi-layer sandstone reservoirs.

Detailed sedimentary facies of a sandstone reservoir in the eastern zone of the Sulige gas field, Ordos Basin

Given sustaining exploration, the eastern zone of the Sulige gas field may soon become a key area of exploitation. In order to explore its genesis, types and distribution of the reservoir sandstones in the eastern zone of this gas field, we focused in our study on the provenance and detailed sedimentary facies of sandstone of the He8 （the eighth part of the Shihezi formation, Permian system） and Shanxil （the first part of the Shanxi formation, Permian system） members, based on core observations, analyses in petrography, granularity and logging. The results show that： 1） the sandstone provenance of Shanxil and He8 in the eastern zone of the Sulige gas field is from the north of the Ordos Basin, characterized by dual directions from the north and northeast. 2） The He8 and Shanxil members were deposited in a fluvial-delta sedimentary system. The He8 was mainly deposited in braided rivers, in- cluding braided channels, channel bars, levee and floodplain sub-environments, whereas the Shanxil Member was deposited in braided rivers and deltas, including braided channels, channel bars, floodplains, tributaries and inter-tributary sub-environments. 3） Sedimentary facies bands migrated in drastic fashion towards the basin from the Shanxil to the He8 Member. Base levels of sedi- mentation generally present a trend of small increases in-amplitude, large decreasing amplitudes and slow and gradual Increases. 4） The continuity of the reservoir sandbodies along the source direction is better than that perpendicular to the direction. Compared with Shanxil, both dimensions and continuity of the sandbodies in He8 are better from which we conclude that it is the most fa- vorable part of the reservoir.

Controlling factors of high-quality volcanic reservoirs of Yingcheng Formation in the Songnan gas field

Predicting high-quality volcanic reservoirs is one of the key issues for oil and gas exploration in the Songnan gas field.Core,seismic,and measurement data were used to study the lithologies,facies,reservoir porosity,and reservoir types of the volcanic rocks in the Songnan gas field.The primary controlling factors and characteristics of the high-quality volcanic reservoirs of the Yingcheng Formation in the Songnan gas field were investigated,including the volcanic eruptive stage,edifice,edifice facies,cooling unit,lithology,facies,and diagenesis.Stages with more volatile content can form more high-quality reservoirs.The effusive rhyolite,explosive tuff,and tuff lava that formed in the crater,near-crater,and proximal facies and in the high-volatility cooling units of large acidic-lava volcanic edifices are the most favorable locations for the development of the high-quality reservoirs in the Songnan gas field.Diagenesis dissolution,which is controlled by tectonic action,can increase the size of secondary pores in reservoirs.Studying the controlling factors of the high-quality reservoirs can provide a theoretical basis for the prediction and analysis of high-quality volcanic reservoirs.

Eogenetic karst and its control on reservoirs in the Ordovician Majiagou Formation, eastern Sulige gas field, Ordos Basin, NW China

To further ascertain the origin of the Ordovician Majiagou Formation reservoirs in the Ordos Basin,the M54-M51 sub-members of the Ordovician Majiagou Formation in the eastern Sulige gasfield of Ordos Basin were taken as examples to analyze the vertical development characteristics of eogenetic karst and to discover the dissolution mechanism and its control on reservoirs through observation of a large number of cores and thin sections.According to detailed analysis of petrologic characteristics,the reservoir rock types include micritic dolomite,grain dolomite and microbialite which have mainly moldic pore,intergranular(dissolved)pore,and(dissolved)residual framework pore as main reservoir space respectively.The study area developed upward-shallowing sequences,with an exposure surface at the top of a single upward-shallowing sequence.The karst systems under the exposure surface had typical exposure characteristics of early dissolution and filling,indicating these reservoirs were related to the facies-controlled eogenetic karstification.With the increase of karstification intensity,the reservoirs became worse in physical properties.

Relationships between gas reservoir and the evolution of stope surrounding rock fracture at the process of mining the closed distance protection layer

Overburden rock movements and fracture developments occur during mining activities. Consequently, relief gas reservoirs and migration in coal seams being mined as well as in near distant coal seams appear. We considered a gas disaster management project and rules on stope relief of gas flows together and explored a gas reservoir and the evolution of stope surrounding rock fractures in the process of mining near distant protective layers by physical simulation, numerical simulation and field testing. Different techniques provide evidence of the rules of interaction of gas reservoirs and the evolution of surrounding rock fractures and are able to find accurately the gas-rich regions around the stope. Finally, we found that these rules can provide a basis for taking measures to prevent gas accidents in the protective layer of the coalface as well as for demonstrating and designing programs to drain high concentrations of gas from the gob.

Water coning mechanism in Tarim fractured sandstone gas reservoirs

The problem of water coning into the Tarim fractured sandstone gas reservoirs becomes one of the major concerns in terms of productivity, increased operating costs and environmental effects. Water coning is a phenomenon caused by the imbalance between gravity and viscous forces around the completion interval. There are several controllable and uncontrollable parameters influencing this problem. In order to simulate the key parameters affecting the water coning phenomenon, a model was developed to represent a single well with an underlying aquifer using the fractured sandstone gas reservoir data of the A-Well in Dina gas fields.The parametric study was performed by varying six properties individually over a representative range. The results show that matrix permeability, well penetration(especially fracture permeability), vertical-to-horizontal permeability ratio, aquifer size and gas production rate have considerable effect on water coning in the fractured gas reservoirs. Thus, investigation of the effective parameters is necessary to understand the mechanism of water coning phenomenon. Simulation of the problem helps to optimize the conditions in which the breakthrough of water coning is delayed.

Simulation of the Production Performances of Horizontal Wells with a Fractured Shale Gas Reservoir

The production performances of a well with a shale gas reservoir displaying a complex fracture network are simulated.In particular,a micro-seismic cloud diagram is used to describe the fracture network,and accordingly,a production model is introduced based on a multi-scale flow mechanism.A finite volume method is then exploited for the integration of the model equations.The effects of apparent permeability,conductivity,Langmuir volume,and bottom hole pressure on gas well production are studied accordingly.The simulation results show that ignoring the micro-scale flow mechanism of the shale gas leads to underestimating the well gas production.It is shown that after ten years of production,the cumulative gas production difference between the two scenarios with and without considering the micro-scale flow mechanisms is 19.5%.The greater the fracture conductivity,the higher the initial gas production of the gas well and the cumulative gas production.The larger the Langmuir volume,the higher the gas production rate and the cumulative gas production.With the reduction of the bottom hole pressure,the cumulative gas production increases,but the growth rate gradually decreases.

Proppant transport in rough fractures of unconventional oil and gas reservoirs

A method to generate fractures with rough surfaces was proposed according to the fractal interpolation theory.Considering the particle-particle,particle-wall and particle-fluid interactions,a proppant-fracturing fluid two-phase flow model based on computational fluid dynamics(CFD)-discrete element method(DEM)coupling was established.The simulation results were verified with relevant experimental data.It was proved that the model can match transport and accumulation of proppants in rough fractures well.Several cases of numerical simulations were carried out.Compared with proppant transport in smooth flat fractures,bulge on the rough fracture wall affects transport and settlement of proppants significantly in proppant transportation in rough fractures.The higher the roughness of fracture,the faster the settlement of proppant particles near the fracture inlet,the shorter the horizontal transport distance,and the more likely to accumulate near the fracture inlet to form a sand plugging in a short time.Fracture wall roughness could control the migration path of fracturing fluid to a certain degree and change the path of proppant filling in the fracture.On the one hand,the rough wall bulge raises the proppant transport path and the proppants flow out of the fracture,reducing the proppant sweep area.On the other hand,the sand-carrying fluid is prone to change flow direction near the contact point of bulge,thus expanding the proppant sweep area.

A new method to calculate the productivity index for vertical fractured well of tight gas reservoir

Generally the irreducible water saturation of low permeability gas reservoir is quite high which leads to the permeability stress sensibility and threshold pressure gradient. Under the assumption that permeability varies with experimental law of the pseudo pressure drop, according to concepts of perturbable ellipses and equivalent developing regulations, the calculation method of stable production of hydraulically fractured gas well in low permeability reservoirs is investigated with threshold pressure. And productivity curve is drawn and analyzed. The result shows that, permeability modulus and threshold pressure have effect on production of fractured gas well. The higher the permeability modulus and the threshold pressure, the lower the production is. Therefore, the impact of stress sensitive and threshold pressure must he considered when analyzing the productivity of vertical fracture well in low permeability gas reservoir.

The Relationship between Fractures and Tectonic Stress Field in the Extra Low-Permeability Sandstone Reservoir at the South of Western Sichuan Depression

The formation and distribution of fractures are controlled by paleotectonic stress field, and their preservative status and effects on development are dominated by the modern stress field. Since Triassic, it has experienced four tectonic movements and developed four sets of tectonic fractures in the extra low-permeability sandstone reservoir at the south of western Sichuan depression. The strikes of fractures are in the S-N, NE-SW, E-W, and NW-SE directions respectively. At the end of Triassic, under the horizontal compression tectonic stress field, for which the maximum principal stress direction was NW.SE, the fractures were well developed near the S-N faults and at the end of NE-SW faults, because of their stress concentration. At the end of Cretaceous, in the horizontal compression stress fields of the NE-SW direction, the stress was obviously lower near the NE-SW faults, thus, fractures mainly developed near the S-N faults. At the end of Neogene-Early Pleistocene, under the horizontal compression tectonic stress fields of E-W direction, stress concentrated near the NE-SW faults and fractures developed at these places, especially at the end of the NE-SE faults, the cross positions of NE-SW, and S-N faults. Therefore, fractures developed mostly near S-N faults and NE-SW faults. At the cross positions of the above two sets of faults, the degree of development of the fractures was the highest. Under the modern stress field of the NW-SE direction, the NW-SE fractures were mainly the seepage ones with tensional state, the best connectivity, the widest aperture, the highest permeability, and the minimum opening pressure.

Diagenesis and Their Succession of Gas-bearing and Non-gas-bearing Reservoirs in the Sulige Gas Field of Ordos Basin,China

Comparisons have been made among lithology, diagenesis, and reservoir characteristics of gas-bearing and non-gas-bearing ones in the Sulige gas field of the Ordos Basin based on the laboratory analysis of thin sections, scanning electron microscope, and liquid inclusion of the reservoirs. The reservoirs of the Sulige gas field are now in the middle stage of diagenesis and have undergone compaction, cementation and dissolution. The secondary pore of the reservoir originated from the dissolution of the feldspar and tuff because of the organic acid action from the source rocks during the diagenetic middle stage. Gas-bearing reservoirs are common in soluble pore diagenetic facies of coarse detritus quartzose sandstone, whereas non-gas-bearing ones are common in tense compaction diagenetic facies of mud-bearing medium-fine detritus quartzose sandstone and residual intergranular pore diagenetic facies of mud-bearing medium-coarse detritus quartzose sandstone. The secondary pore is developed in gas-bearing reservoirs of the Sulige gas-field as the medium-coarse grain reservoirs formed in a powerful sedimentary environment and experienced strong dissolution. However, the sediments of fine grain size form the non-gas-bearing reservoirs because of less residual primary pore and secondary pore.

Field Scale Simulation Study of Miscible Water Alternating CO₂Injection Process in Fractured Reservoirs

Vast amounts of world oil reservoirs are in natural fractured reservoirs. There are different methods for increasing recovery from fractured reservoirs. Miscible injection of water alternating CO2?is a good choice among EOR methods. In this method, water and CO2?slugs are injected alternatively in reservoir as miscible agent into reservoir. This paper studies water injection scenario and miscible injection of water and CO2?in a two dimensional, inhomogeneous fractured reservoir. The results show that miscible water alternating CO2?gas injection leads to 3.95% increase in final oil recovery and total water production decrease of 3.89% comparing to water injection scenario.

Gas Field Development in Sichuan Basin:An Introduction to Typical Reservoirs

ＧａｓＦｉｅｌｄＤｅｖｅｌｏｐｍｅｎｔｉｎＳｉｃｈｕａｎＢａｓｉｎ：ＡｎＩｎｔｒｏｄｕｃｔｉｏｎｔｏＴｙｐｉｃａｌＲｅｓｅｒｖｏｉｒｓ￥ＲａｎＬｏｎｇｈｕｉ（Ｄｅｐｕｔｙ）ＣｈｉｅｆＧｅｏｌｏｇｉｓｔ．ＳｉｃｈｕａｎＰｅｔｒｏｌｅｕｍＡｄｍｉｎｉｓｔ...