Study on the Two-Dimensional Density Distribution for Gas Plasmas Driven by Laser Pulse

We perform an experimental study of two-dimensional（2D） electron density profiles of the laser-induced plasma plumes in air by ordinarily laboratorial interferometry. The electron density distributions measured show a feature of hollow core. To illustrate the feature, we present a theoretical investigation by using dynamics analysis. In the simulation, the propagation of laser pulse with the evolution of electron density is utilized to evaluate ionization of air target for the plasma-formation stage. In the plasma-expansion stage, a simple adiabatic fluid dynamics is used to calculate the evolution of plasma outward expansion. The simulations show good agreements with experimental results, and demonstrate an effective way of determining 2D density profiles of the laser-induced plasma plume in gas.

The second fusion of laser and aerospace-an inspiration for high energy lasers

Since the first laser was invented,the pursuit of high-energy lasers(HELs)has always been enthusiastic.The first revolution of HELs was pushed by the fusion of laser and aerospace in the 1960s,with the chemical rocket engines giving fresh impetus to the birth of gas flow and chemical lasers,which finally turned megawatt lasers from dream into reality.Nowadays,the development of HELs has entered the age of electricity as well as the rocket engines.The properties of current electric rocket engines are highly consistent with HELs’goals,including electrical driving,effective heat dissipation,little medium consumption and extremely light weight and size,which inspired a second fusion of laser and aerospace and motivated the exploration for potential HELs.As an exploratory attempt,a new configuration of diode pumped metastable rare gas laser was demonstrated,with the gain generator resembling an electric rocket-engine for improved power scaling ability.

Final Status of a Metal Sample Surface after Multipulse Laser Irradiation in an Ambient Gas

We have investigated the role of the ambient gas nature and pressure in the structure and appearance of the laser treated zone. and the influence of the total duration and temporal shape of laser pulse with the laser tight being λ= 10.6μm wavelength incident upon a metallic surface at intermediate taser intensities of 107-108 W / cm2. A plasma is accompanied by the action of the laser pulse, It acts as an active moderator among laser beam and target thus determining the final status of the contact surface

Intra-Cavity Absorption Gas Sensors Using Wavelength Modulation and Wavelength Sweep

Wavelength modulation technique （WMT） and wavelength sweep technique （WST） are introduced into intra-cavity absorption gas sensors （ICAGS） for low concentration gas detection. The optimized parameters of the system maximizing the signal-to-noise ratio （SNR） are found. Calibration of acetylene concentration and gas recognition are both realized.

Spectroscopy system based on a single quantum cascade laser for simultaneous detection of CO and CO_2

A quantum cascade laser（QCL） based system for simultaneous detection of CO and CO_2 is developed.The QCL can scan over two neighboring CO（2055.40 cm^（-1）） and CO_2（2055.16 cm^（-1）） lines with a single current scan.The wavelength modulation spectroscopy（ f = 20 k Hz） is utilized to enhance the signal-to-noise ratio.A white cell with an effective optical path length of 74 m is used.The calibration of the sensor is performed and minimum detection limits of 1.3 ppb（1 × 10^（-9））for CO and 0.44 ppm（1 × 10^（-6）） for CO_2 are achieved.

A 110 W fiber gas Raman laser at 1153 nm

We report here the first hundred-watt continuous wave fiber gas laser in H_(2)-filled hollow-core photonic crystal fiber(PCF)by stimulated Raman scattering.The pump source is a homemade narrow-linewidth fiber oscillator with a 3 dB linewidth of 0.15 nm at the maximum output power of 380 W.To efficiently and stably couple several-hundred-watt pump power into the hollow core and seal the gas,a hollow-core fiber end-cap is fabricated and used at the input end.A maximum power of 110 W at 1153 nm is obtained in a 5 m long hollow-core PCF filled with 36 bar H2,and the conversion efficiency of the first Stokes power is around 48.9%.This work paves the way for high-power fiber gas Raman lasers.

Low-threshold continuous operation of fiber gas Raman laser based on large-core anti-resonant hollow-core fiber

Continuous operation of fiber gas Raman lasing at the 1135 nm wavelength is experimentally demonstrated with an output power exceeding 26 W.Rotational stimulated Raman scattering(Rot-SRS)is generated in the hydrogen gas filled 50 m homemade anti-resonant hollow-core fiber(AR-HCF).A single-frequency fiber laser at the 1064 nm wavelength is used as the pump source,and a minimum threshold of 31.5 W is measured where the core diameter of AR-HCF reaches37μm.Up to 40.4%power conversion efficiency of forward Rot-SRS is achieved in the single-pass configuration,corresponding to a quantum efficiency of 43.1%.Over 1 W strong backward Rot-SRS is observed in the experiment,ultimately limiting the further increase of Rot-SRS generation in the forward direction.

Demonstration of a diode-pumped dual-wavelength metastable krypton laser

Diode-pumped rare gas lasers are potential candidates for high-energy and high-beam quality laser systems.Currently,most investigations are focused on metastable Ar lasers.The Kr system has the unique advantages of higher quantum efficiency and lower discharge requirements for comparison.In this paper,a diode-pumped metastable Kr laser was demonstrated for the first time.Using a repetitively pulsed discharge at a Kr/He pressure of up to approximately1500 Torr,metastable Kr atoms of more than 10^(13)cm^(-3)were generated.Under diode pumping,the laser realized a dual-wavelength output with an average output power of approximately 100 mW and an optical conversion efficiency of approximately 10% with respect to the absorbed pump power.A kinetics study involving population distribution and evolution was conducted to analyze the laser performance.

Computational fluid dynamic modeling of gas flow characteristics of the high-power CW CO_2 laser

To increase the photoelectronic conversion efficiency of the single discharge tube and to meet the requirements of the laser cutting system, optimization of the discharge tube structure and gas flow field is necessary. We present a computational fluid dynamic model to predict the gas flow characteristics of high-power fast-axial flow CO2 laser. A set of differential equations is used to describe the operation of the laser. Gas flow characteristics, are calculated. The effects of gas velocity and turbulence intensity on discharge stability are studied. Computational results are compared with experimental values, and a good agreement is observed. The method presented and the results obtained can make the design process more efficient.

Characteristics of blood fluorescence spectra using low-level, 457.9-nm excitation from Ar^+ laser

We measured the fluorescence spectra of the whole blood, the red blood cell (RBC) and the hemoglobin using 457.9-nm Ar+ laser excitation. It was found that the fluorescence spectra of the whole blood and the RBC have much similarities in the intensity, the emission peaks and the emitting region, and abundant peaks can be found. But for the hemoglobin, fluorescence could only be found in the wavelength range 580 - 650 nm. It was concluded that in the wavelength range of 650-850 nm, the fluorescence spectra were emitted by the new fluorophores generated by the breakdown of some weak bonds on the RBC membrane, such as the C-C bond and the C-N bond. In the wavelength range of 590-650 nm, the fluorescence spectra are mainly emitted by the hemoglobin, but the hemoglobin solution of cracked RBC has a strong quencher effect on the fluorescence spectrum. The experimental result and the theoretical analysis are meaningful for the medical diagnostics and the therapy.

Optically pumped terahertz sources

High-power terahertz(THz) generation in the frequency range of 0.1-10 THz has been a fast-developing research area ever since the beginning of the THz boom two decades ago, enabling new technological breakthroughs in spectroscopy, communication, imaging,etc. By using optical(laser) pumping methods with near-or mid-infrared(IR) lasers, flexible and practical THz sources covering the whole THz range can be realized to overcome the shortage of electronic THz sources and now they are playing important roles in THz science and technology. This paper overviews various optically pumped THz sources, including femtosecond laser based ultrafast broadband THz generation, monochromatic widely tunable THz generation, single-mode on-chip THz source from photomixing, and the traditional powerful THz gas lasers. Full descriptions from basic principles to the latest progress are presented and their advantages and disadvantages are discussed as well. It is expected that this review gives a comprehensive reference to researchers in this area and additionally helps newcomers to quickly gain understanding of optically pumped THz sources.

Segmented pulsed discharge for metastable argon lasing medium

Direct current pulsed discharge is a promising route for producing high-density metastable particles required for optically pumped rare gas lasers(OPRGLs).Such metastable densities are easily realized in small discharge volumes at near atmospheric pressures,but problems appear when one is trying to achieve a large volume of plasma for high-power output.In this work,we examined the volume scalability of high-density metastable argon atoms by segmented discharge configuration.Two discharge zones attached with peaking capacitors were connected parallelly by thin wires,through which the peaking capacitors were charged and of which the inductance functioned as ballasting impendence to prevent discharging in only one zone.A uniform and dense plasma with the peak value of the number densities of Ar(1s^(5))on the order of 10^(13)cm^(-3)was readily achieved.The results demonstrated the feasibility of using segmented discharge for 0PRGL development.