The research progress of an E//B neutral particle analyzer

An E//B neutral particle analyzer(NPA)has been designed and is under development at Sichuan University and Southwestern Institute of Physics.The main purpose of the E//B NPA is to measure the distribution function of fast ions in the HL-2A/3 tokamak.The E//B NPA contains three main units,i.e.the stripping unit,the analyzing unit and the detection unit.A gas stripping chamber was adopted as the stripping unit.The results of the simulations and beam tests for the stripping chamber are presented.Parallel electric and magnetic fields provided by a NdFeB permanent magnet and two parallel electric plates were designed and constructed for the analyzing unit.The calibration of the magnetic and electric fields was performed using a 50 kV electron cyclotron resonance ion source(ECRIS)platform.The detection unit consists of 32lutetium-yttrium oxyorthosilicate(LYSO)detector modules arranged in two rows.The response functions ofα,hydrogen ions(H^(+),H_(2)^(+)and H_(3)^(+))andγfor a detector module were measured with^(241)Am,^(137)Cs and^(152)Eu sources together with the 50 kV ECRIS platform.The overall results indicate that the designed E//B NPA device is capable of measuring the intensity of neutral hydrogen and deuteron atoms with energy higher than 20 keV.

On-line least squares support vector machine algorithm in gas prediction

Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squares support vector machine(LS-SVM) algorithm is an improved algorithm of SVM.But the common LS-SVM algorithm,used directly in safety predictions,has some problems.We have first studied gas prediction problems and the basic theory of LS-SVM.Given these problems,we have investigated the affect of the time factor about safety prediction and present an on-line prediction algorithm,based on LS-SVM.Finally,given our observed data,we used the on-line algorithm to predict gas emissions and used other related algorithm to compare its performance.The simulation results have verified the validity of the new algorithm.

Some New Techniques of Gas Analysis Developed in RIPP

ＳｏｍｅＮｅｗＴｅｃｈｎｉｑｕｅｓｏｆＧａｓＡｎａｌｙｓｉｓＤｅｖｅｌｏｐｅｄｉｎＲＩＰＰＹａｎｇＨａｉｙｉｎｇ，ＬｕＷａｎｚｈｅｎ（ＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｏｆＰｅｔｒｏｌｅｕｍＰｒｏｃｅｓｉｎｇ，Ｂｅｉｊｉｎｇ１０００８３）Ａｂｓｔｒａ...

Recognizing frequency characteristics of gas sensor array

A novel method based on independent component analyzing (ICA) in frequency domain to distinguish the frequency characteristics of multi-sensor system is presented. The conditions of this type of ICA are considered and each step of resolving the problem is discussed. For a two gas sensor array, the frequency characteristics including amplitude-frequency and phase-frequency are recognized by this method, and cross-sensitivity between them is also eliminated. From the principle of similarity, the recognition mean square error is no more than 0.085.

Insight into the effect of thick graphite electrodes towards high-performance cylindrical Ni-rich NCA90 Li-ion batteries

This study explored the complex effect of graphite tortuosity on the electrochemical performance of Ni-rich NCA90 Li-ion batteries(LIBs).Different levels of graphite anode tortuosity were analyzed,revealing that low-tortuosity electrodes had better graphite utilization.The in-plane tortuosities of the graphite anode electrodes examined were 1.70,1.94,2.05,and 2.18,while their corresponding through-plane tortuosities were 4.74,6.94,8.19,and 9.80.In-operando X-ray diffraction and differential electrochemical mass spectrometry were employed to investigate the charge storage mechanism and gas evolution.The study revealed that while graphite electrode tortuosity impacted the amount of Li present in the lithiated graphite phase due to diffusion constraints,it did not affect gas generation.The Li-ion utilization in low-tortuosity electrodes was higher than that in high-tortuosity electrodes because of solid-diffusion limitations.Additionally,the galvanostatic intermittent titration technique(GITT) was employed to investigate a lithium-ion diffusion coefficient.Our results indicate that the lithium-ion diffusion coefficient exhibits a significant difference only during LiC_(6) phase transition.We also observed that the use of a lower tortuosity electrode leads to improved lithium-ion insertion.Consequently,graphite utilization is influenced by the porous electrode design.Safety tests adhering to UN38.3 guidelines verified battery safety.The study demonstrated the practical application of optimized NCA90 LIB cells with diverse graphite electrode tortuosities in a high-performance Lamborghini GoKart,paving the way for further advancements in Ni-rich LIB technology.

Surface Modification of Polyethylene Terephthalate(PET) Fiber by Roll-to-Roll Treatment in Atmospheric Ar/O_2 Dielectric Barrier Discharge(DBD) Plasma

In this work,polyethylene terephthalate(PET) fibers were continuously treated by atmospheric dielectric barrier discharge(DBD) in Ar mixed O2 plasma,and the discharge was characterized by electrical function and optical diagnostics.It is found that the interfacial adhesion strength between treated PET fiber and resorcinol formaldehyde latex(RFL)(little)-rubber was improved(about 50%) by the measurement of interfacial shear strength(IFSS) and peel test.The wettability was improved rapidly in the initial treatment time.It is considered that oxidation chemical reaction as the major role of PET fiber surface modification is ahead of the physical etching effect.The high density of atomic oxygen in the plasma by optical emission spectroscopy supports the purpose.According to the scanning electron micrograph(SEM) image in the work,the longer treatment time obviously caused physical etching effect,which shall be less responsible for the improvement of the wettability.

A Re-examination of Density Effects in Eddy Covariance Measurements of CO_2 Fluxes

Corrections of density effects resulting from air-parcel expansion/compression are important in interpreting eddy covariance fluxes of water vapor and CO2 when open-path systems are used. To account for these effects, mean vertical velocity and perturbation of the density of dry air are two critical parameters in treating those physical processes responsible for density variations. Based on various underlying assumptions, different studies have obtained different formulas for the mean vertical velocity and perturbation of the density of dry air, leading to a number of approaches to correct density effects. In this study, we re-examine physical processes related to different assumptions that are made to formulate the density effects. Specifically, we re-examine the assumptions of a zero dry air flux and a zero moist air flux in the surface layer, used for treating density variations, and their implications for correcting density effects. It is found that physical processes in relation to the assumption of a zero dry air flux account for the influence of dry air expansion/compression on density variations. Meanwhile, physical processes in relation to the assumption of a zero moist air flux account for the influence of moist air expansion/compression on density variations. In this study, we also re-examine mixing ratio issues. Our results indicate that the assumption of a zero dry air flux favors the use of the mixing ratio relative to dry air, while the assumption of a zero moist air flux favors the use of the mixing ratio relative to the total moist air. Additionally, we compare different formula for the mean vertical velocity, generated by air-parcel expansion/compression, and for density effect corrections using eddy covariance data measured over three boreal ecosystems.

Recent Progress of Commercially Available Biosensors in China and Their Applications in Fermentation Processes

Biosensors, which are the products of the biotechnology industry, are among the key projects of the 7th, 8th, and 9th Fiveyear Plans of China Science ＆ Technology Developing Programs, respectively, and they play an important role in developing and reforming traditional biotechnology. SBA series biosensor analyzer, as the only one commercial biosensor in China, has attracted lots of attention in the process of information gathering and measurement for biological industry with the development of technology and society. In this paper, we presented an overview of the most important contributions dealing with the monitoring of the biochemical analytes in fermentation processes using SBA series biosensor analyzers in China. Future trends of the biosensor analyzer in China were also mentioned in the last section.

Relationship among Different Soil Biochemical Methods to Determine Soil Health

Numerous soil biochemical methods are used to determine the soil health status, but the relationships among these methods are not well understood. Relationships among soil biochemical tests, 1) chloroform fumigated microbial biomass C (CFMBC), 2) permanganate oxidizable C (POXC), 3) Solvita CO2-burst (Solvita), 4) Solvita labile amino nitrogen (SLAN), and short-term soil CO2 efflux during laboratory incubation using (v) Alkali-base trap (Alkali) and (vi) infrared gas analyzer (IRGA), were evaluated for nine agricultural soils collected across the Red River Valley of North Dakota and Minnesota, USA. Not a single test is comprehensive to relate with all soil biochemical tests. Coefficient of variation percentage for particular method varied with soil type. Among six tests, CFMBC is significantly (p < 0.05) related with Alkali (r = 0.37), Solvita (r = 0.57), SLAN (r = 0.52), and POXC (r = 0.68). Soil CFMBC correlates with most of soil biochemical tests and can be potential to determine soil biochemical condition.

Correlation between GEM Premier 3000 and Vitros5.1+5600, SYSMEX XN-9000 in Detecting Electrolytes and Red Blood Cell Volume

Objective: To explore the consistency and relevance of the results of the bedside rapid blood gas analyzer GEM premier 3000, the Vitros5.1+5600 biochemical immunoassay analyzer and the SYSMEX XN-9000 automatic blood cell analyzer in the central laboratory detecting serum potassium (K+), serumsodium (Na+), blood glucose (Glu), hemoglobin (Hb) and red blood cell volume (Hct). And to provide a reference for the accurate interpretation of the bedside blood gas analysis report. Method: Usually, ICU patients will be taken arterial blood gas, biochemical and blood samples through the arterial indwelling needle;at the same time patients’ potassium, serum sodium, blood glucose, hemoglobin and red blood cell volume will be detected. This study implemented paired t-test and correlation regression analysis on each group of data, and used the analysis quality requirements (allowable total error) of CLIA’88 proficiency testing program as the criteria for clinical acceptance. Results: The paired t-test showed that the serum potassium, serum sodium and blood glucose detected by GEM premier 3000 and Vitros5.1+5600 were significantly different;and the hemoglobin and red blood cell volume detected by GEM premier 3000 and SYSMEX XN-9000 were significantly different (P < 0.05). The Pearson correlation coefficients (r) of hemoglobin, red blood cell volume and red blood cell volume were 0.860, 0.886, 0.924, 0.841 and 0.856, respectively, and the above test items all had good correlations (P < 0.05). The average (SE) of the paired differences of K+, Na+, Glu, Hb and Hct detected by the two sets of instruments is less than the allowable error of CLIA’88, and the SE of blood Na+ and Hb is less than half of the allowable error of CLIA’88. Conclusion: The test results of GEM premier 3000, the central laboratory Vitros5.1+5600 and SYSMEX XN-9000 have good correlation, but the consistency is not good. The test results of GEM premier 3000 cannot replace the central laboratory.

A new method to measure the concentration of argon-xenon gas mixture

RGAs are widely used in molec Background RGAs are widely used in molecular component examination,impurity analysis,leak detection and test of vacuum system performance.However,RGAs have different sensitivities to different gases,and the sensitivities can change quickly and depend on so many parameters,which make its ability severely limited.Methods In thiswork we established a newpractical method to precisely measure noble gas ratio of argon-xenon gasmixture.Gaseous argon and xenon were controlled,respectively,by two mass flow controller(MFC).A variable leak valve(VLV)was used to introduce the gas mixture sample into the RGA measurement chamber.Gas mixtures with xenon concentration from 200ppm to 20000ppm(by mass)were introduced and tested by RGA.Results The time stability of RGA-measurement system was optimized to 2.1%.A good linearity of MFC-RGA response was achieved,verifying the reliability of RGA in measuring noble gas mixture with component concentration down to several hundred ppm level.Conclusions Since the approach we used in our experiment is gas-species independent,we believe that it can be popularized to other gas species when properly applied.

Gain deeper insights into traditional Chinese medicines using multidimensional chromatography combined with chemometric approaches

Traditional Chinese medicines(TCMs)possess a rich historical background,unique theoretical framework,remarkable therapeutic efficacy,and abundant resources.However,the modernization and internationalization of TCMs have faced significant obstacles due to their diverse ingredients and unknown mechanisms.To gain deeper insights into the phytochemicals and ensure the quality control of TCMs,there is an urgent need to enhance analytical techniques.Currently,two-dimensional(2D)chromatography,which incorporates two independent separation mechanisms,demonstrates superior separation capabilities compared to the traditional one-dimensional(1D)separation system when analyzing TCMs samples.Over the past decade,new techniques have been continuously developed to gain actionable insights from complex samples.This review presents the recent advancements in the application of multidimensional chromatography for the quality evaluation of TCMs,encompassing 2D-gas chromatography(GC),2D-liquid chromatography(LC),as well as emerging three-dimensional(3D)-GC,3D-LC,and their associated data-processing approaches.These studies highlight the promising potential of multidimensional chromatographic separation for future phytochemical analysis.Nevertheless,the increased separation capability has resulted in higher-order data sets and greater demands for data-processing tools.Considering that multidimensional chromatography is still a relatively nascent research field,further hardware enhancements and the implementation of chemometric methods are necessary to foster its robust development.

Progress of Optical Fiber Sensors and Its Application in Harsh Environment

Fiber sensors have been developed for industry application with significant advantages.In this paper,Fiber sensors for oil field service and harsh environment monitoring which have been investigated in Tsinghua University are demonstrated.By discussing the requirements of practical applications,the key technologies of long-period fiber grating(LPFG)based fiber sensor,optical spectrum analyzer for oil detection,laser induced breakdown spectroscopy(LIBS)system for soil contamination monitoring,and seismic sensor arrays are described.

Sniffing with mass spectrometry

Gaseous compounds are usually on-line detectable on sensors. The limitations of conventional sensors are suffering from incapability for exactly identifying multiple components as well as incompatibility to possible toxicants in every odor sample. Herein, we discuss an inlet modification to the laboratory standard mass spectrometer, inspired by the sensitive olfactory systems of animals, for direct sniffing,established by connecting a mini pump to the nebulizer gas tubing. The modified mass spectrometry method—sniffing-mass spectrometry(sniffing-MS)—can acquire detailed fingerprint spectra of mixed odors and shows high tolerance to toxicants. Furthermore, the method has a low limit of detection in the order of parts per trillion and is a ‘sampling-free' technique for analyzing various gaseous compounds simultaneously, thus offering versatility for smelling daily commodities, tracking diffusion, and locating position of odors. Sniffing-MS can mimic or even surpass the olfaction of animals and is applicable for analyzing gaseous/volatile compounds, especially those polar compounds, in a simple manner depending on the intrinsic molecular mass-to-charge ratio.