Numerical Simulation of Gas-Solid Flow in Square Cyclone Separators with Downward Exit

Cyclone separators are widely used in industrial applications. The separation efficiency and pressure drop are the most important parameters to evaluate the performance of processing system. In the simulations,the flow behavior of gas and particles within a square cyclone separator is simulated by means of computational fluid dynamics. The RNG k- ε model and the Reynolds stress model( RSM) are used to model gas turbulence. The flow behavior is examined in the term of tangential velocity components,static pressure and pressure drop contour plots for flow field and solid volume fraction. The effects of the turbulence model and solid volume fraction on the square cyclone are discussed. The results indicate that the pressure drop increases with the increase of solid volume fraction,and increase with the increase of inlet velocities for two turbulence models, moreover,the simulations results are compared with pressure field. For all runs,the RSM model gives a higher pressure drop compared to the RNG k- ε model. The RSM model provides well the forced vortex and free vortex,and captures better the phenomena occurring during intense vortex flow in the presence of walls within cyclone separators.

CFD studies on the separation performance of a new combined gas–solid separator used in TMSR-SF

In order to comply with discharge standards, a gas–solid separator is used to remove solid particles from the thorium molten salt reactor-solid fuel (TMSR-SF) system. As a key component, it directly determines system energy efficiency. However, current gas–solid separators, based on activated carbon adsorption technology, result in high pressure drops and increased maintenance costs. In the present study, a new combined gas–solid separator was developed for the TMSR-SF. Based on a simplified computational fluid dynamics (CFD) model, the gas–solid twophase flow and the motion trajectory of solid particles were simulated for this new separator using commercial ANSYS 16.0 software. The flow and separation mechanism for this structure were also been discussed in terms of their velocity effects and pressure field distributions, and then the structure was optimized based on the influence of key structural parameters on pressure and separation efficiency. The results showed that the standard k–ε model could be achieved and accurately simulated the new combined separator. In this new combined gas–solid separator, coarse particles are separated in the first stage using rotating centrifugal motion, and then fine particles are filtered in the second stage, giving a separation efficiency of up to 96.11%. The optimum blade inclination angle and numbers were calculated to be 45° and four, respectively. It implicated that the combined separator could be of great significance in a wide variety of applications.

Numerical Investigation of Coupling Effect in Muitipipe Ceramic Filter Vessel

The Reynolds stress transport model and the Eulerian two-fluid model provided by the FLUENT code were applied to evaluate the gas-particle two-phase flow in the ceramic filter vessel. The ceramic filter vessel contains six candle filters, which are arranged in the form of equilateral hexagon. The variation of the areal density of the filter cake during the filtration and the back-pulse process were analyzed. The coupling effect between filters, gas and solid, filtration and pulse cleaning process were investigated, respectively. The numerical results show a good approach to predict the particle distribution in the vessel and the particle deposition on the filter element. This study provides the base for the intensive study on the analysis of the gas-particle flow in the filter vessel.

Experimental study on reactor performance of gas-solids low-velocity fluidized beds

Reactor performance of bubbling fluidized bed(BFB)and turbulent fluidized bed(TFB)was carefully examined and systematically compared using catalytic ozone decomposition as a model reaction,based on a complete mapping of local flow structures and spatial distributions of ozone conversion and solids holdup.TFB clearly has a higher conversion and shows better reactor performance than BFB as a result of the vigorously turbulent flow and the relatively homogeneous gas–solids mixing in TEB.Besides,the intensive interaction between gas and solids in TFB leads to greater gas–solids contact efficiency of TFB over that of BFB.Due to gas bypassing and backmixing caused by bubbling behaviours and two-phase structure,BFB deviates significantly from a plug flow reactor and sometimes from a continuously stirred tank reactor.The flow structures essentially dictate the reactor performance in the low-velocity fluidized beds.

Research on Performance of U Separator in Sand and Dust Test System

Sand/dust test is one of the key projects to examine the environmental adaptability of ordnance equipment.In order to decrease the abrasion of test facility caused by the sand/dust particles,the particles contained in the airflowneed to be reclaimed effectively.Amathematical model of Useparator is established.The flowfield and the trajectories of particles inside the separator are obtained using a numerical simulation method,and the separation efficiency and pressure drop of separator with different rows of separate components are also obtained at various flowvelocities.The simulation results indicate that the efficiency of U inertia separator is affected by the flowvelocity evidently,and a reasonably designed separator can meet the requirement of the separation efficiency in particular situation.The results can be use as reference for the design and test of sand/dust separate systems.