Vast amounts of world oil reservoirs are in natural fractured reservoirs. There are different methods for increasing recovery from fractured reservoirs. Miscible injection of water alternating CO2?is a good choice amo...Vast amounts of world oil reservoirs are in natural fractured reservoirs. There are different methods for increasing recovery from fractured reservoirs. Miscible injection of water alternating CO2?is a good choice among EOR methods. In this method, water and CO2?slugs are injected alternatively in reservoir as miscible agent into reservoir. This paper studies water injection scenario and miscible injection of water and CO2?in a two dimensional, inhomogeneous fractured reservoir. The results show that miscible water alternating CO2?gas injection leads to 3.95% increase in final oil recovery and total water production decrease of 3.89% comparing to water injection scenario.展开更多
A dynamic transient flow analysis method considering complex factors such as the cyclic injection and production history in a gas field storage facility was established in view of the limitations of the existing metho...A dynamic transient flow analysis method considering complex factors such as the cyclic injection and production history in a gas field storage facility was established in view of the limitations of the existing methods for transient flow analysis and the characteristics of the injection-production operation of strongly heterogeneous gas reservoirs, and the corresponding theoretical charts were drawn. In addition, an injection-production dynamic transient flow analysis model named "three points and two stages" suitable for an underground gas storage(UGS) well with alternate working conditions was proposed. The "three points" refer to three time points during cyclic injection and production, namely, the starting point of gas injection for UGS construction, the beginning and ending points of the injection-production analysis stage;and the "two stages" refer to historical flow stage and injection-production analysis stage. The study shows that the dimensionless pseudo-pressure and dimensionless pseudo-pressure integral curves of UGS well flex downward in the early stage of the injection and production process, and the dimensionless pseudo-pressure integral derivative curve is convex during the gas production period and concave during the gas injection period, and the curves under different flow histories have atypical features. The new method present in this paper can analyze transient flow of UGS accurately. The application of this method to typical wells in Hutubi gas storage shows that the new method can fit the pressure history accurately, and obtain reliable parameters and results.展开更多
For low-permeability sandstone reservoir with big channel, we researched the novel deep profile method alternative injection of anionic and cationic polymer. Evaluating various factors on adsorption capacity through l...For low-permeability sandstone reservoir with big channel, we researched the novel deep profile method alternative injection of anionic and cationic polymer. Evaluating various factors on adsorption capacity through lab test, the results show that with the increase of temperature, the adsorption capacity decreases and the cationic polymer is easier to be absorbed. With the increase of salinity, adsorption time or polymer concentration, the adsorption capacity increases. The adsorption equilibrium concentration of cationic polymer is 1500 mg/L;adsorption equilibrium time is 8 h. The adsorption equilibrium concentration of anionic polymer is 1000 mg/L;adsorption equilibrium time is 6 h. Physical simulation experiment shows that alternative injection of anionic and cationic polymer is better than injection of single polymer, and preferential injection of cationic polymer is better than preferential injection of anionic polymer. With the increase of injection rounds, sealing capacity gets better, but in view of cost, the rounds should not be more than 3. The profile control technique can obviously enhanced oil recovery, and water displacement recovery increases 41%. 2 wells were tested successfully in Henan Oilfield in June 2010. Approximate 154.47 tons of incremental oil was obtained with 2% water-cut decrease.展开更多
1.Objective Natural gas hydrates are considered as a potential alternative fuel resource to petroleum and gas (Chong ZR et al.,2016),which can be exploited by means of depressurization,thermal method,inhibitor injecti...1.Objective Natural gas hydrates are considered as a potential alternative fuel resource to petroleum and gas (Chong ZR et al.,2016),which can be exploited by means of depressurization,thermal method,inhibitor injection,etc.For the thermal method,gas hydrates are decomposed into water and methane when the reservoir is heated to above the equilibrium temperature of gas hydrate (Li X et al.,2016). However,the thermal recovery method needs a great deal of heat,and thus the feasibility of economic exploitation is reduced.展开更多
为了提高海上非均质稠油油田聚合物驱效果,采用疏水缔合聚合物AP-P4(特性黏数1800 m L/g、疏水基含量0.8%),通过双管并联岩心物理模拟实验研究了渗透率级差、注聚浓度、注聚时机对渤海稠油油藏早期注聚剖面返转的影响规律,比较了交替注...为了提高海上非均质稠油油田聚合物驱效果,采用疏水缔合聚合物AP-P4(特性黏数1800 m L/g、疏水基含量0.8%),通过双管并联岩心物理模拟实验研究了渗透率级差、注聚浓度、注聚时机对渤海稠油油藏早期注聚剖面返转的影响规律,比较了交替注入聚合物的类型和浓度、交替次数对提高采收率效果的影响。研究结果表明:聚合物驱适用于早期注聚(含水率小于80%)、渗透率级差小(﹤6)的油层条件,聚合物良好的注入性和合适的流度控制作用对提高稠油聚合物驱采收率十分重要;弱凝胶体系和聚合物体系交替注入对高渗层伤害大,提高采收率效果差;在相同聚合物用量条件下,高浓度(2250 mg/L×0.15 PV)与低浓度聚合物体系(1750 mg/L×0.15 PV)交替注入2个轮次比单一段塞注聚(聚合物用量1200 mg/L·PV)提高采收率4.3%,渤海稠油油藏开展高浓度/低浓度聚合物体系交替注入可改善稠油聚合物驱效果。展开更多
文摘Vast amounts of world oil reservoirs are in natural fractured reservoirs. There are different methods for increasing recovery from fractured reservoirs. Miscible injection of water alternating CO2?is a good choice among EOR methods. In this method, water and CO2?slugs are injected alternatively in reservoir as miscible agent into reservoir. This paper studies water injection scenario and miscible injection of water and CO2?in a two dimensional, inhomogeneous fractured reservoir. The results show that miscible water alternating CO2?gas injection leads to 3.95% increase in final oil recovery and total water production decrease of 3.89% comparing to water injection scenario.
基金Supported by the CNPC Major Scientific and Technological Project(2019B-3204)PetroChina Major Scientific and Technological Project(kt2020-16-01)。
文摘A dynamic transient flow analysis method considering complex factors such as the cyclic injection and production history in a gas field storage facility was established in view of the limitations of the existing methods for transient flow analysis and the characteristics of the injection-production operation of strongly heterogeneous gas reservoirs, and the corresponding theoretical charts were drawn. In addition, an injection-production dynamic transient flow analysis model named "three points and two stages" suitable for an underground gas storage(UGS) well with alternate working conditions was proposed. The "three points" refer to three time points during cyclic injection and production, namely, the starting point of gas injection for UGS construction, the beginning and ending points of the injection-production analysis stage;and the "two stages" refer to historical flow stage and injection-production analysis stage. The study shows that the dimensionless pseudo-pressure and dimensionless pseudo-pressure integral curves of UGS well flex downward in the early stage of the injection and production process, and the dimensionless pseudo-pressure integral derivative curve is convex during the gas production period and concave during the gas injection period, and the curves under different flow histories have atypical features. The new method present in this paper can analyze transient flow of UGS accurately. The application of this method to typical wells in Hutubi gas storage shows that the new method can fit the pressure history accurately, and obtain reliable parameters and results.
文摘For low-permeability sandstone reservoir with big channel, we researched the novel deep profile method alternative injection of anionic and cationic polymer. Evaluating various factors on adsorption capacity through lab test, the results show that with the increase of temperature, the adsorption capacity decreases and the cationic polymer is easier to be absorbed. With the increase of salinity, adsorption time or polymer concentration, the adsorption capacity increases. The adsorption equilibrium concentration of cationic polymer is 1500 mg/L;adsorption equilibrium time is 8 h. The adsorption equilibrium concentration of anionic polymer is 1000 mg/L;adsorption equilibrium time is 6 h. Physical simulation experiment shows that alternative injection of anionic and cationic polymer is better than injection of single polymer, and preferential injection of cationic polymer is better than preferential injection of anionic polymer. With the increase of injection rounds, sealing capacity gets better, but in view of cost, the rounds should not be more than 3. The profile control technique can obviously enhanced oil recovery, and water displacement recovery increases 41%. 2 wells were tested successfully in Henan Oilfield in June 2010. Approximate 154.47 tons of incremental oil was obtained with 2% water-cut decrease.
基金the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB06020204)Natural Science Foundation of China (41606087 and 91858208)the Marine Geological Survey project of China Geological Survey (DD20160218).
文摘1.Objective Natural gas hydrates are considered as a potential alternative fuel resource to petroleum and gas (Chong ZR et al.,2016),which can be exploited by means of depressurization,thermal method,inhibitor injection,etc.For the thermal method,gas hydrates are decomposed into water and methane when the reservoir is heated to above the equilibrium temperature of gas hydrate (Li X et al.,2016). However,the thermal recovery method needs a great deal of heat,and thus the feasibility of economic exploitation is reduced.
