In this paper, effect of gasification temperature and residence time on gasification characteristics of typical pulverized coals under atmosphere pressure were studied on a one-dimensional electric heating drop tube f...In this paper, effect of gasification temperature and residence time on gasification characteristics of typical pulverized coals under atmosphere pressure were studied on a one-dimensional electric heating drop tube furnace system to evaluate gasification characteristics of pulverized coal at medium temperature. The results show that the gasification rate increases with the raising of the gasification temperature under the temperature among 1150℃and1450℃, and as the temperature is above1350℃, the increasing rate become slower. Cold gas efficiency?and?carbon conversion meet the maximum value when the temperature approaches the ash fusion point of coal. With the further rise of the temperature, ash on the surface of the char starts to be melted,?the gasification reaction rate decreases, due to the hindrance of the effective contact between coal char and gasification agent. The gasification efficiency would become steady when the residence time exceeds 8s.展开更多
Supercritical carbon dioxide(S-CO_(2))Brayton power cycle power generation technology,has attracted more and more scholars'attention in recent years because of its advantages of high efficiency and flexibility.Com...Supercritical carbon dioxide(S-CO_(2))Brayton power cycle power generation technology,has attracted more and more scholars'attention in recent years because of its advantages of high efficiency and flexibility.Compared with conventional steam boilers,S-CO_(2) has different heat transfer characteristics,it is easy to cause the temperature of the cooling wall of the boiler to rise,which leads to higher combustion gas temperature in the furnace,higher NOX generation concentration.The adoption of flue gas recirculation has a significance impact on the combustion process of pulverized coal in the boiler,and it is the most effective ways to reduce the emission of NOX and the combustion temperature in the boiler.This paper takes 1000MW S-CO_(2) T-type coal-fired boiler as the research target to investigate the combustion and NOX generation characteristics of S-CO_(2) coal-fired boilers under flue gas recirculation condition,the influence of recirculated flue gas distribution along the furnace height on the characteristics of NOX formation and the combustion of pulverized coal.The results show that the recirculated flue gas distribution has the great impact on the concentration of NOX at the boiler outlet.When the bottom recirculation flue gas rate is gradually increased,the average temperature of the lower boiler decreases and the average temperature of the upper boiler increases slightly;The concentration of NOx at the furnace outlet increases.展开更多
In a gas/particle two-phase test facility, a three-component particle-dynamics anemometer was used to measure the characteristics of gas/particle two-phase flows in a 29 megawatt (MW) pulverized coal industrial boiler...In a gas/particle two-phase test facility, a three-component particle-dynamics anemometer was used to measure the characteristics of gas/particle two-phase flows in a 29 megawatt (MW) pulverized coal industrial boiler equipped with a new type of swirling pulverized coal burner. The distributions of three-dimensional gas/particle velocity, particle volume flux, and particle size distribution were measured under different working conditions. The mean axial velocity and the particle volume flux in the central region of the burner outlet were found to be negative. This indicated that a central recirculation zone was formed in the center of the burner. In the central recirculation zone, the absolute value of the mean axial velocity and the particle volume flux increased when the external secondary air volume increased. The size of the central reflux zone remained stable when the air volume ratio changed. Along the direction of the jet, the peak value formed by the tertiary air gradually moved toward the center of the burner. This tertiary air was mixed with the peak value formed by the air in the adiabatic combustion chamber after the cross-section of x/d = 0.7. Large particles were concentrated near the wall area, and the particle size in the recirculation zone was small.展开更多
In the past two decades, the oxy-fuel combustion of pulverized coal has been extensively developed, leading to the completion of several large industrial pilot oxy-fuel plants worldwide. Various types of oxy-fuel burn...In the past two decades, the oxy-fuel combustion of pulverized coal has been extensively developed, leading to the completion of several large industrial pilot oxy-fuel plants worldwide. Various types of oxy-fuel burners have been designed and tested in largescale pilot plants as key components of oxy-fuel combustion. These burners face major challenges in terms of their flame stability because of their decreasing stream momentum ratio and increasing carbon dioxide concentration. However, it offers flexibility in adjusting the oxygen concentration in each burner stream. This study aims to provide a comprehensive review of the state-of-the-art knowledge on oxy-coal burner design and operation in power plants. First, the combustion characteristics under oxy-fuel conditions are briefly introduced. Subsequently, the principal requirements and fundamental parameters of the oxy-coal burners are discussed. The development process of oxy-fuel burners is also presented. Moreover, a compatible design strategy and scaling-up techniques are described for oxy-coal burners developed by the authors over the past ten years. The performances of oxy-coal burners in three large pilot oxy-fuel plants worldwide are summarized and compared. Finally, concluding remarks are provided and potential research needs are suggested.展开更多
In order to improve the calorific value and the recovery yield of converter gas during the steelmaking process, a novel and thermodynamically admissible process was proposed. This method involved injecting pulverized ...In order to improve the calorific value and the recovery yield of converter gas during the steelmaking process, a novel and thermodynamically admissible process was proposed. This method involved injecting pulverized coal into the vaporization cooling flue of a converter, and the approach was developed based on an industrial 30 t converter. The effects of temperature, O2 content, and the volumetric ratio of CO to CO2 on the conversion of the mixed components of gas were analyzed using thermodynamic calculations. Furthermore, the effect of the injection rate on the quality and quantity of gas was investigated. The results show that the O2 and CO2 components of flue gas decrease as the injection rate increases, whereas the CO and H2 components synchronously increase. With the injection rate of 30 kg min-1, the 02 and CO2 components of the gas decreased by 64.12 and 41.19%, respectively, while the CO and H2 increased by 20.09 and 236.84%, respectively, and the recovery time of gas increased by 11.61%, compared to non-injection.展开更多
The present paper describes the numerical investigation for a newly developed pulverized coal rich/lean burner used in the utility boilers. The mechanism of the rich/lean separation process of the pulverized coal are ...The present paper describes the numerical investigation for a newly developed pulverized coal rich/lean burner used in the utility boilers. The mechanism of the rich/lean separation process of the pulverized coal are analyzed and the effect of the height of the baffle body and the different particle sizes on the separation efficiency are considered. It is concluded that the burner is applicable in industry.展开更多
In this paper, the problems of combustion instability and high-temperature corrosion of pulverized coal fired boiler are investigated by numerical simulation and analysis of the momentum moment. Elbow and twisting pla...In this paper, the problems of combustion instability and high-temperature corrosion of pulverized coal fired boiler are investigated by numerical simulation and analysis of the momentum moment. Elbow and twisting plate type of burners are used in the boiler, and the reverse moment of momentum is formed at the outlet of the fuel-rich side of the burner. The momentum moment in the boiler is opposite to the designed tangential circle, and the tangential circle in the boiler is reversed rotation. The reverse moment of momentum at the burner outlet can be eliminated by using louver horizontal bias pulverized coal burner, while the problems of combustion instability and high-temperature corrosion of the boiler are solved, and the combustion efficiency is improved. Accordingly,economic benefit is obviously got.展开更多
文摘In this paper, effect of gasification temperature and residence time on gasification characteristics of typical pulverized coals under atmosphere pressure were studied on a one-dimensional electric heating drop tube furnace system to evaluate gasification characteristics of pulverized coal at medium temperature. The results show that the gasification rate increases with the raising of the gasification temperature under the temperature among 1150℃and1450℃, and as the temperature is above1350℃, the increasing rate become slower. Cold gas efficiency?and?carbon conversion meet the maximum value when the temperature approaches the ash fusion point of coal. With the further rise of the temperature, ash on the surface of the char starts to be melted,?the gasification reaction rate decreases, due to the hindrance of the effective contact between coal char and gasification agent. The gasification efficiency would become steady when the residence time exceeds 8s.
基金This paper is supported by the National Key R&D Program of China(2017YFB0601805).
文摘Supercritical carbon dioxide(S-CO_(2))Brayton power cycle power generation technology,has attracted more and more scholars'attention in recent years because of its advantages of high efficiency and flexibility.Compared with conventional steam boilers,S-CO_(2) has different heat transfer characteristics,it is easy to cause the temperature of the cooling wall of the boiler to rise,which leads to higher combustion gas temperature in the furnace,higher NOX generation concentration.The adoption of flue gas recirculation has a significance impact on the combustion process of pulverized coal in the boiler,and it is the most effective ways to reduce the emission of NOX and the combustion temperature in the boiler.This paper takes 1000MW S-CO_(2) T-type coal-fired boiler as the research target to investigate the combustion and NOX generation characteristics of S-CO_(2) coal-fired boilers under flue gas recirculation condition,the influence of recirculated flue gas distribution along the furnace height on the characteristics of NOX formation and the combustion of pulverized coal.The results show that the recirculated flue gas distribution has the great impact on the concentration of NOX at the boiler outlet.When the bottom recirculation flue gas rate is gradually increased,the average temperature of the lower boiler decreases and the average temperature of the upper boiler increases slightly;The concentration of NOx at the furnace outlet increases.
基金This work was supported by National Key Research and Development Program of China(Grant No.2017YF C0212500).
文摘In a gas/particle two-phase test facility, a three-component particle-dynamics anemometer was used to measure the characteristics of gas/particle two-phase flows in a 29 megawatt (MW) pulverized coal industrial boiler equipped with a new type of swirling pulverized coal burner. The distributions of three-dimensional gas/particle velocity, particle volume flux, and particle size distribution were measured under different working conditions. The mean axial velocity and the particle volume flux in the central region of the burner outlet were found to be negative. This indicated that a central recirculation zone was formed in the center of the burner. In the central recirculation zone, the absolute value of the mean axial velocity and the particle volume flux increased when the external secondary air volume increased. The size of the central reflux zone remained stable when the air volume ratio changed. Along the direction of the jet, the peak value formed by the tertiary air gradually moved toward the center of the burner. This tertiary air was mixed with the peak value formed by the air in the adiabatic combustion chamber after the cross-section of x/d = 0.7. Large particles were concentrated near the wall area, and the particle size in the recirculation zone was small.
基金supported by the National Natural Science Foundation of China(Grant No. 51906075)Key Research and Development Program of Department of Science and Technology of Jiangxi Province(Grant No. 20223BBG74009)Science and Technology Innovation Project for Carbon Peak and Carbon Neutrality of Jiangxi Carbon Neutralization Research Center(Grant No. 2022JXST01)。
文摘In the past two decades, the oxy-fuel combustion of pulverized coal has been extensively developed, leading to the completion of several large industrial pilot oxy-fuel plants worldwide. Various types of oxy-fuel burners have been designed and tested in largescale pilot plants as key components of oxy-fuel combustion. These burners face major challenges in terms of their flame stability because of their decreasing stream momentum ratio and increasing carbon dioxide concentration. However, it offers flexibility in adjusting the oxygen concentration in each burner stream. This study aims to provide a comprehensive review of the state-of-the-art knowledge on oxy-coal burner design and operation in power plants. First, the combustion characteristics under oxy-fuel conditions are briefly introduced. Subsequently, the principal requirements and fundamental parameters of the oxy-coal burners are discussed. The development process of oxy-fuel burners is also presented. Moreover, a compatible design strategy and scaling-up techniques are described for oxy-coal burners developed by the authors over the past ten years. The performances of oxy-coal burners in three large pilot oxy-fuel plants worldwide are summarized and compared. Finally, concluding remarks are provided and potential research needs are suggested.
文摘In order to improve the calorific value and the recovery yield of converter gas during the steelmaking process, a novel and thermodynamically admissible process was proposed. This method involved injecting pulverized coal into the vaporization cooling flue of a converter, and the approach was developed based on an industrial 30 t converter. The effects of temperature, O2 content, and the volumetric ratio of CO to CO2 on the conversion of the mixed components of gas were analyzed using thermodynamic calculations. Furthermore, the effect of the injection rate on the quality and quantity of gas was investigated. The results show that the O2 and CO2 components of flue gas decrease as the injection rate increases, whereas the CO and H2 components synchronously increase. With the injection rate of 30 kg min-1, the 02 and CO2 components of the gas decreased by 64.12 and 41.19%, respectively, while the CO and H2 increased by 20.09 and 236.84%, respectively, and the recovery time of gas increased by 11.61%, compared to non-injection.
文摘The present paper describes the numerical investigation for a newly developed pulverized coal rich/lean burner used in the utility boilers. The mechanism of the rich/lean separation process of the pulverized coal are analyzed and the effect of the height of the baffle body and the different particle sizes on the separation efficiency are considered. It is concluded that the burner is applicable in industry.
基金the Training Program Fund for Young Teachers in Shanghai Higher Education Institutions(No.405ZK12YQ06)
文摘In this paper, the problems of combustion instability and high-temperature corrosion of pulverized coal fired boiler are investigated by numerical simulation and analysis of the momentum moment. Elbow and twisting plate type of burners are used in the boiler, and the reverse moment of momentum is formed at the outlet of the fuel-rich side of the burner. The momentum moment in the boiler is opposite to the designed tangential circle, and the tangential circle in the boiler is reversed rotation. The reverse moment of momentum at the burner outlet can be eliminated by using louver horizontal bias pulverized coal burner, while the problems of combustion instability and high-temperature corrosion of the boiler are solved, and the combustion efficiency is improved. Accordingly,economic benefit is obviously got.