Effect of multiple parameters on the supersonic gas-jet target characteristics for laser wakefield acceleration

The supersonic gas-jet target is an important experimental target for laser wakefield acceleration(LWFA),which has great potential for driving novel radiation sources such as betatron radiation and Compton scattering gamma rays.According to different electron acceleration requirements,it is necessary to provide specific supersonic gas jets with different density profiles to generate electron beams with high quality and high repetition rates.In this study,the interference images and density profiles of different gas-jet targets were obtained through a modified Nomarski interference diagnosis system.The relationships between the gas density and back pressure,nozzle structure,and other key parameters were studied.Targets with different characteristics are conducive to meeting the various requirements of LWFA.

EFFECT OF GAS FLOW RATE ON CRYSTAL STRUCTURES OF ELECTROSPUN AND GAS-JET/ELECTROSPUN POLY(VINYLIDENE FLUORIDE)FIBERS

The effect of gas flow rate on crystal structures of electrospun and gas-jet/electrospun poly(vinylidene fluoride) (PVDF) fibers was investigated.PVDF fibers were prepared by electrospinning and gas-jet/electrospinning of its N,N-dimethylformamide (DMF) solutions.The morphology of the PVDF fibers was investigated by scanning electron microscopy (SEM).With an increase of the gas flow rate,the average diameters of PVDF fibers were decreased.The crystal structures and thermal properties of the PVDF fibers were...

Study on the Wiping Gas Jet in Continuous Galvanizing Line

In the continuous hot-dip galvanizing process, the gas-jet wiping is used to control the coating thickness of moving steel strip. The high speed gas-jet discharged from the nozzle slot impinges on the strip, and at this moment, wipes the liquid coating layer dragged by a moving strip. The coating thickness is generally influenced on the flow characteristics of wiping gas-jet such as the impinging pressure distribution, pressure gradient and shear stress distribution on the surface of strip. The flow characteristics of wiping gas-jet mentioned above depends upon considerably both the process operating conditions such as the nozzle pressure, nozzle-to-strip distance and line speed, and the geometry of gas-jet wiping apparatus such as the height of nozzle slot. In the present study, the effect of the geometry of nozzle on the coating thickness is investigated with the help of a computational fluid dynamics method. The height of nozzle slot is varied in the range of 0.6mm to 1.7mm. A finite volume method (FVM) is employed to solve two-dimensional, steady, compressible Navier-Stokes equations. Based upon the results obtained, the effect of the height of nozzle slot in the gas-jet wiping process is discussed in detail. The computational results show that for a given standoff distance between the nozzle to the strip, the effective height of nozzle slot exists in achieving thinner coating thickness.

Polarized proton beams from laser-induced plasmas

We report on the concept of an innovative source to produce polarized proton/deuteron beams of a kinetic energy up to several GeV from a laser-driven plasma accelerator. Spin effects have been implemented into the particle-in-cell(PIC) simulation code VLPL(Virtual Laser Plasma Lab) to make theoretical predictions about the behavior of proton spins in laser-induced plasmas. Simulations of spin-polarized targets show that the polarization is conserved during the acceleration process. For the experimental realization, a polarized HCl gas-jet target is under construction using the fundamental wavelength of a Nd:YAG laser system to align the HCl bonds and simultaneously circularly polarized light of the fifth harmonic to photo-dissociate, yielding nuclear polarized H atoms. Subsequently, their degree of polarization is measured with a Lamb-shift polarimeter. The final experiments, aiming at the first observation of a polarized particle beam from laser-generated plasmas, will be carried out at the 10 PW laser system SULF at SIOM, Shanghai.