期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
A New Model for the Simulation of Distillation Column 被引量:5
1
作者 李文彬 刘伯潭 +1 位作者 K.T.YU余国琮 袁希钢 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2011年第5期717-725,共9页
A new computational mass transfer model is proposed for simulating the distillation process by solving the fluctuating mass flux u^'ic^' for the closure of turbulent mass transfer equation in order to obtain the con... A new computational mass transfer model is proposed for simulating the distillation process by solving the fluctuating mass flux u^'ic^' for the closure of turbulent mass transfer equation in order to obtain the concentration profile and the separation efficiency of distillation column. The feather of the proposed model is to abandon the conventional way of introducing the turbulent mass transfer diffusivity (dispersion coefficient) to the turbulent mass transfer equation. To verify the validity of the proposed model, a commercial scale packed column and a sieve tray column were simulated and compared with published experimental data. The simulated results were satisfactorily confirmed in both concentration distribution and senaration efficiency. 展开更多
关键词 distillation simulation packed column tray column fluctuatlng mass flux
下载PDF
The Analysis of Distillation Tray Column Efficiency by Fluid Dynamics and Mass Transfer Computation 被引量:1
2
作者 刘春江 袁希钢 余国琮 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2005年第2期153-160,共8页
It has long been found that the flow pattern of the liquid phase on distillation tray is of great importance on distillation process performance. But until now, there was very few published work on quantitative invest... It has long been found that the flow pattern of the liquid phase on distillation tray is of great importance on distillation process performance. But until now, there was very few published work on quantitative investigation of this subject. By combining the computational fluid dynamics (CFD) with the mass transfer equation, a theoretical model is proposed for predicting the details of velocity and concentration distributions as well as the tray efficiency of distillation tray column. Using the proposed model, four different cases corresponding to different assumptions of liquid and vapor flowing condition for a distillation tray column were investigated. In Case I, the distributions of velocity and concentration of the incoming liquid from the downcomer and the uprising vapor from the underneath tray spacing are uniform. In Case n, the distribution of the incoming liquid is non-uniform but the uprising vapor is uniform. In Case HI, the distribution of the incoming liquid is uniform but the uprising vapor is non-uniform. In Case IV, the distributions of both the incoming liquid and the uprising vapor are non-uniform. The details of velocity and concentration distributions on a multiple sieve tray distillation column in four different cases were simulated using the proposed model. It is found that the shape of the simulated concentration profiles of vapor and the liquid is quite different from case to case. The computed results also show that the tray efficiency is highly reduced by the maldistribution of velocity and concentration of the incoming liquid and uprising vapor. The tray efficiency for Case I is higher than Case Ⅱ or Case Ⅲ, and that for Case Ⅳ is the lowest. It also reveals that the accumulated effect of maldistribution becomes more pronounced when the number of column trays increased. The present study demonstrates that the use of computational method to predict the mass transfer efficiency for the tray column, especially for the large one, is feasible. 展开更多
关键词 CFD distillation tray column mass transfer
下载PDF
国外气液传质设备的一些发展趋势 被引量:9
3
作者 徐孝民 周青 沈复 《化工进展》 EI CAS CSCD 北大核心 1994年第1期22-28,共7页
作为气液传质塔主要构件的塔板和填料在过去几十年中的发展速度各有快慢,竞争能力时有强弱。进入80年代后,由于板波规整填料的成功应用,填料及其相关内件的开发研究速度明显快于板式塔。事实上,塔板和填料各有优缺点,各适用于不同... 作为气液传质塔主要构件的塔板和填料在过去几十年中的发展速度各有快慢,竞争能力时有强弱。进入80年代后,由于板波规整填料的成功应用,填料及其相关内件的开发研究速度明显快于板式塔。事实上,塔板和填料各有优缺点,各适用于不同的场合。未来几年中,以下几方面将得到重视和发展:工艺条件与塔内构件的一体化匹配;结构与材质的改进或更新;整塔的精心设计、制造、安装和操作;故障检测和诊断技术现代化;设计模型的理论化和普遍化;小型热模-大型冷模-计算机模拟放大相结合的放大策略;工业经验和数据的积累与分析。 展开更多
关键词 气液传质 蒸馏塔 塔板 填料
下载PDF
规整填料塔中精馏过程的三维模拟(Ⅰ)物理模型和模型方程 被引量:5
4
作者 孙树瑜 王树楹 余国琮 《化工学报》 EI CAS CSCD 北大核心 1998年第5期549-559,共11页
建立了能描述规整填料塔中液体三维流动和混合的精馏过程混合池模型。对模型方程组的封闭性作了分析,并给出模型中液体流动分布和混合参数的计算方法。针对完整的三维混合池模型在求解计算上的费时,提出了适用于规整填料塔精馏过程的... 建立了能描述规整填料塔中液体三维流动和混合的精馏过程混合池模型。对模型方程组的封闭性作了分析,并给出模型中液体流动分布和混合参数的计算方法。针对完整的三维混合池模型在求解计算上的费时,提出了适用于规整填料塔精馏过程的简化三维混合池模型和求解该方程的两步法。 展开更多
关键词 精馏过程 填料塔 规整填料 三维模拟 质量传递
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部