Pore throat structure heterogeneity and its effect on gas-phase seepage capacity in tight sandstone reservoirs:A case study from the Triassic Yanchang Formation,Ordos Basin

The microscopic heterogeneity of pore-throat structures in tight sandstone is a crucial parameter for understanding the transport mechanism of fluid flow.In this work,we firstly developed the new procedure to characterize the pore size distribution(PSD)and throat size distribution(TSD)by combining the nuclear magnetic resonance(NMR),cast thin section(CTS),and constant-rate mercury injection(CRMI)tests,and used the permeability estimated model to verify the full-scale PSD and TSD.Then,we respectively analyzed the fractal feature of the pore and throat,and characterized the heterogeneity of pores and throats.Finally,we elaborated the effect of the pore and throat heterogeneity on the gas-phase seepage capacity base on the analysis of the simple capillary tube model and gas-flooding experiment.The results showed that(1)The PSD and TSD of the tight sandstone sample ranged from 0.01 to 10 mm and from 0.1 to 57 mm,respectively,mainly contributed by the micropores and mesopores.Meanwhile,the permeability estimated by the PSD and TSD was consistent with the experimental permeability,and relative error was lower than 8%.(2)The PSD and TSD exhibited multifractal characteristics,and singularity strength range,Δα,could be used as the indicator for characterizing the heterogeneity of pore and throat.Furthermore,the throat of the sample showed stronger heterogeneity than that the pore.(3)The throats played an important role for the fluid transport in the tight sandstone,and the effect of the throat heterogeneity on the gas-phase seepage capacity was different under the lower and higher injection pressure.The macropores and micropores maybe respectively become the preferential migration pathways at the lower and higher injection pressure.In the end,the identification plate was established in our paper,and could be described the relationship among the throat heterogeneity,injection pressure,permeability and flow path of the gas phase in the tight sandstone.

Gas-phase electrocatalytic reduction of carbon dioxide using electrolytic cell based on phosphoric acid-doped polybenzimidazole membrane

Carbon dioxide transformation to fuels or chemicals provides an attractive approach for its utilization as feedstock and its emission reduction. Herein, we report a gas-phase electrocatalytic reduction of CO2 in an electrolytic cell, constructed using phosphoric acid-doped polybenz- imidazole （PBI） membrane, which allowed operation at 170 ℃ Pt/C and PtMo/C with variable ratio of Pt/Mo were studied as the cathode catalysts. The results showed that PtMo/C catalysts significantly enhanced CO formation and inhibited CH4 formation compared with Pt/C catalyst. Characterization by X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy revealed that most Mo species existed as MoO3 in PtMo/C catalysts and the interaction between Pt and MoOx was likely responsible for the enhanced CO formation rate although these bicomponent catalysts in general had a larger particle size than Pt/C catalyst.

Synthesis of dimethyl carbonate by gas-phase oxidative carbonylation of methanol in the presence of solid catalyst I. Catalyst preparation and catalytic Properties

The gas-phase synthesis of dimethyl carbonate (DMC) from methanol, carbon monoxide and oXygen has here Studied in a flow system at atomspheric Pressure. A series of Catalyst used in this reaCtion have been prepared and evaluated. The influence of trivared carbon supporters, alkaline metal Promoters and operation conditions on DMC opthesis reaction has been discussed. Under the conditions of 130℃, CO/O2=1 .96, SV=3340h-1, the space-time yield (STY) of DMC over PdCl2-CuCl2-CH3COOK/ac. catalyst is 217g/l-cat h,which is higher than what is published in the literatUre so far.

Influence of heat treatment on microstructure and electrochemical behaviors of Mg-Zn binary alloys prepared by gas-phase alloying technique

Mg-Zn binary alloys fabricated by the gas-phase alloying technique under vacuum condition were investigated in the state of initial state and after heat treatment for the microstructure and electrochemical behaviors.Different from the traditional Mg-Zn alloys preparation methods,alloys prepared by gas-phase alloying have a large number of intermetallic compounds,such as MgZn,Mg7Zn3 and MgZn2.After solution treatment,the boundary of the eutectic disappeared and the size ofα-Mg increased from 100μm to 150μm.At the same time,the value of the resistance of charge transfer increased,which indicates that the resistance of the charge transfer and the corrosion resistance of the alloys increased.After artificial aging treatment,the distribution ofα-Mg was more uniform and its size was reduced to about 50μm,and there was new eutectic structure formed.The newly formed eutectic structure forms galvanic cells with the alloy matrix,which makes the corrosion resistance of the alloy weaken.

Gas-phase dehydrochlorination of 1, 1, 2, 2-tetrachloroethane over the non-metal supported ionic liquid catalyst

Developing of non-metallic catalyst to replace metal catalyst is a meaningful and challenging direction.In this work,the non-metallic catalyst was synthetized successfully by loading ionic liquid onto the silica surface,which was applied for the gas-phase dehydrochlorination of 1,1,2,2-tetrachloroethane.The 12%TPPC/SiO2(wt%)showed the best results with the conversion of 1,1,2,2-tetrachloroethane reaching 100%.The selectivity of 1,1,2-trichloroethylene was 100%,and no deactivation was found during the evaluation period.The catalytic mechanism was investigated and possible reaction route was given,which was a reference for fabricating and design of solid base catalyst.

Anaerobic digestion of kitchen wastes in a single-phased anaerobic sequencing batch reactor(ASBR) with gas-phased absorb of CO_2

The performance of the single-stage anaerobic digestion of kitchen wastes was investigated in an anaerobic sequencing batch reactor(ASBR) with gas-phased absorb of CO 2. The ASBR was operated at four chemical oxygen demand(COD) loading rates, 2.8, 5.1, 6.2 and 8.4 g/(L·d) respectively. The COD loading rate was increased with the TS concentration and HRT changing. At maximum COD loading rate of 8.4 g/(L·d), the COD, total solid(TS) removal rate and methane gas yield were 69%, 68% and 2.5 L/(L·d) respectively. The operation of the reactor with gas-phased absorb of CO 2 was stable in spite of the low pH(2.6—3.9) and high concentration of TS(142 g/L) of input mixture. The output volatile fatty acid(VFA) concentration was between 2.7—4.7 g/L and had no inhibition on the methanogenic microorganism. The reactor without gas-phased absorb of CO 2 became acidified when the total COD loading rate was increased to 5.1 g/(L·d). Stoichiometry of the methanogenesis for kitchen wastes showed a considerable amount of alkaline will be required to keep pH in the appropriate range for the methanogenic microorganism based on theoretical calculation. Gas-phased absorb of CO 2 effectively reduced the alkaline consumption, hence avoided excessive cation into the reactor.

Gas-phase CO_(2)activation with single electrons,metal atoms,clusters,and molecules

In this review,the history and outlook of gas-phase CO_(2)activation using single electrons,metal atoms,clusters(mainly metal hydride clusters),and molecules are discussed on both of the experimental and theoretical fronts.Although the development of bulk solid-state materials for the activation and conversion of CO_(2)into value-added products have enjoyed great success in the past several decades,this review focuses only on gas-phase studies,because isolated,well-defined gas-phase systems are ideally suited for high-resolution experiments using state-of-the-art spectrometric and spectroscopic techniques,and for simulations employing modern quantum theoretical methods.The unmatched high complementarity and comparability of experiment and theory in the case of gas-phase investigations bear an enormous potential in providing insights in the reactions of CO_(2)activation at the atomic level.In all of these examples,the reduction and bending of the inert neutral CO_(2)molecule is the critical step determined by the frontier orbitals of reaction participants.Based on the results and outlook summarized in this review,we anticipate that studies of gas-phase CO_(2)activations will be an avenue rich with opportunities for the rational design of novel catalysts based on the knowledge obtained on the atomic level.

Industrial Preparation and Acid Resistance of Ultra-stable Y Zeolite with Small Cell Size Produced by Gas-phase Method

Small-cell HSY-S zeolite prepared by the gas-phase ultra-stable method had been researched and developed,and industrial preparation tests of HSY-S have been successfully carried out for the first time.The acid resistance of industrially prepared HSY-S was investigated by acid solutions with different pH values.The structures and properties of HSY-S and its acid-treated samples were characterized by XRD,XRF,BET,and IR.Results show that the HSY-S samples have the characteristics of high crystallinity,good stability,large specific surface area,and good acid resistance.

The structure optimization of gas-phase surface discharge and its application for dye degradation

A gas-phase surface discharge（GSD）was employed to optimize the discharge reactor structure and investigate the dye degradation.A dye mixture of methylene blue,acid orange and methyl orange was used as a model pollutant.The results indicated that the reactor structure of the GSD system with the ratio of tube inner surface area and volume of 2.48,screw pitch between a high-voltage electrode of 9.7 mm,high-voltage electrode wire diameter of 0.8 mm,dielectric tube thickness of2.0 mm and tube inner diameter of 16.13 mm presented a better ozone（O_3）generation efficiency.Furthermore,a larger screw pitch and smaller wire diameter enhanced the O_3generation.After the dye mixture degradation by the optimized GSD system,73.21%and 50.74%of the chemical oxygen demand（COD）and total organic carbon removal rate were achieved within 20 min,respectively,and the biochemical oxygen demand（BOD）and biodegradability（BOD/COD）improved.

GAS-PHASE ION-MOLECULE REACTIONS OF BUCKMINSTERFULLERENE(C_(60))WITH Si(CH_3)_n CL_(4-n)(n=2,3)IN MASS SPECTROMETER

Reactions of C60 with Si(CH_3)_nCl_(4-n) (n=2,3)in the ion source of the mass spectrometer have been studied.The corresponding adduct ions[C60Si(CH_3)_mCl3_(-m)]^+(m=1,2,3),[C60SiCl]^+ and[C60CH_3]^+ were observed and their possible structures were discussed.The results indicated that C60 is very reactive to electrophiles in the gas phase.

NOX -Catalyzed Gas-Phase Activation of Methane: the Formation of Hydrogen

NO_x-catalyzed oxidation of methane without a solid catalyst wasinvestigated, and a hydrogen selectivity of 27% was obtained with an overall methane conversion of34% and a free O_2 concentration of 1.7% at 700℃.

AB INITIO STUDY ON GAS-PHASE FACTION OF Ca WITH HN_3

The reaction of Ca with HN3 has been investigated theoretically by an ah initio MO methodwith electron correlation being taken into account by second-order MLLER-PLESSET(MP2)perturbation theory Two possible product channels. CaN3+H. CaNH+N2, on the potential energysurfaces(PESs) have been examined and the reaction mechanism discussed. Values of tile HN-NZ,HN3, Ca-N3 and Ca-AH bond dissociation energy are also calculated, which are in good agreement withexperiment

A Condensed Gas-Phase Chemical Model and Its Application

Using the 'lumped mechanism' and 'counting species' methods, we developed a condensed gas-phase chemical model based on a simplified one. The modified quasi-steady-state approximation (QSSA) scheme and the error redistribution mass conservation technique are adopted to solve the atmospheric chemistry kinetic equations. Results show that the condensed model can well simulate concentration variations of gas species such as SO2, NOX, O-3, H2O2 and conversion rates of SO2 and NOX transformation to H2SO4 and HNO3. These results are in good agreement with those from the simplified model. The conversion rates of SO2 and NOX under different initial concentrations and meteorological conditions are computed, and the results can be directly applied to regional acid deposition model.

Gas-Phase Conversion of the U(VI), Sr, Mo, and Zr Oxides in Nitrating Atmosphere

The gas-phase conversion of U3O8, MoO3, SrO, and their mechanical mixtures, and also of ZrO2 into water-soluble compounds in the atmosphere of (NOx + vapor H2O) or HNO3 (vapor) was studied. In the course of gas-phase conversion, U3O8 and SrO transform into water-soluble compounds (nitrates, hydroxonitrates), whereas MoO3 and ZrO2 undergo no changes. The principal possibility of separating U from Mo and Zr by gas-phase conversion of the oxides in the atmosphere of (NOx + vapor H2O) or HNO3 (vapor) was demonstrated.

2-42 Gas-phase Chemistry Study of Ruthenium and Rhodium Carbonyls

In this work, gas-phase chemistry of ruthenium and rhodium was studied using online isothermal chromatographyapparatus at low temperature coupled to the 252Cf SF source[1] at IMP (Fig. 1). Apart from the interferenceof precursor effect[2], 109?110Ru and 111?112Rh were chosen as the representative isotopes for the two elementsrespectively. An improved Monte Carlo molecular simulation program was compiled according to the gas-phasechemistry model[3], and was used in the optimization of the experimental condition. The adsorption enthalpies ofpentacarbonyl ruthenium and tetracarbonyl rhodium on the FEP surface were obtained.

Surface-modified Ag@Ru-P25 for photocatalytic CO_(2) conversion with high selectivity over CH_(4) formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO_(2) reduction to solar fuels.A surface-modified Ag@Ru-P25 photocatalyst with H_(2)O_(2) treatment was designed in this study to convert CO_(2) and H_(2)O vapor into highly selective CH4.Ru doping followed by Ag nanoparticles(NPs)cocatalyst deposition on P25(TiO_(2))enhances visible light absorption and charge separation,whereas H_(2)O_(2) treatment modifies the surface of the photocatalyst with hydroxyl(–OH)groups and promotes CO_(2) adsorption.High-resonance transmission electron microscopy,X-ray photoelectron spectroscopy,X-ray absorption near-edge structure,and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst,while thermogravimetric analysis,CO_(2) adsorption isotherm,and temperature programmed desorption study were performed to examine the significance of H_(2)O_(2) treatment in increasing CO_(2) reduction activity.The optimized Ag1.0@Ru1.0-P25 photocatalyst performed excellent CO_(2) reduction activity into CO,CH4,and C2H6 with a~95%selectivity of CH4,where the activity was~135 times higher than that of pristine TiO_(2)(P25).For the first time,this work explored the effect of H_(2)O_(2) treatment on the photocatalyst that dramatically increases CO_(2) reduction activity.

Characterization of a smog chamber for studying formation of gas-phase products and secondary organic aerosol

Smog chambers provide a potent approach to explore the secondary organic aerosol formation under varied conditions.This study describes the construction and characterization of a new smog chamber facility for studying the formation mechanisms of gas-phase products and secondary organic aerosol from the photooxidation of volatile organic compounds.The chamber is a 5.4 m^(3) Fluorinated Ethylene Propylene(FEP)Teflon reactor with the potential to perform photooxidation experiments at controlled temperature and relative humidity.Detailed characterizations were conducted for evaluation of stability of environmental parameters,mixing time,background contamination,light intensity,and wall losses of gases and particles.The photolysis rate of NO_(2)(J_(NO2))ranged from(1.02-3.32)×10^(-3)sec^(-1),comparable to the average J_(NO2)in ambient environment.The wall loss rates for NO,NO_(2),and O_(3)were 0.47×10^(-4),0.37×10^(-4),and 1.17×10^(-4)min^(-1),while wall loss of toluene was obsoletely found in a 6 hr test.The particle number wall loss rates are(0.01-2.46)×10^(-3)min^(-1)for 40-350 nm with an average lifetime of more than one day.A series of toluene photooxidation experiments were carried out in absence of NO_xunder dry conditions.The results of the simulation experiments demonstrated that the chamber is well designed to simulate photolysis progress in the atmosphere.

Development and Catalytic Cracking Performance of Ultrastable Y Zeolite Rich in Secondary Pores

A novel ultra-stable zeolite, NSZ, rich in secondary pores was developed through the combination of gas-phase andmild hydrothermal methods. This zeolite was successfully tested in an industrial setting for the first time in the world. The porestructure characteristics of the NSZ zeolite prepared for industrial use were analyzed and characterized using BET. The resultsindicate a significant increase in the secondary pore volume of NSZ zeolite compared to the existing ultra-stable zeolite HSZ-5, which is produced through a conventional gas-phase method. The average secondary pore volume to total pore volume ratioin NSZ zeolite was found to be 58.96% higher. The catalytic cracking performance of NSZ zeolite was evaluated. The resultsshowed that the NSC-LTA catalyst, with NSZ as the active component, outperformed the HSC-LTA catalyst with HSZ-5 zeolitein terms of obtaining more high-value products (gasoline and liquefied petroleum gas) during the hydrogenated light cycle oilprocessing. Additionally, the NSC-LTA catalyst showed a significant improvement in coke selectivity.

Fabrication and applications of van der Waals heterostructures

Van der Waals heterostructures(vdWHs) are showing considerable potential in both fundamental exploration and practical applications. Built upon the synthetic successes of(two-dimensional) 2D materials, several synthetic strategies of vdWHs have been developed,allowing the convenient fabrication of diverse vdWHs with decent controllability, quality, and scalability. This review first summarizes the current state of the art in synthetic strategies of vdWHs, including physical combination, deposition, solvothermal synthesis, and synchronous evolution. Then three major applications and their representative vdWH devices have been reviewed, including electronics(tunneling field effect transistors and 2D contact),optoelectronics(photodetector), and energy conversion(electrocatalysts and metal ion batteries), to unveil the potentials of vdWHs in practical applications and provide the general design principles of functional vdWHs for different applications. Besides, moiré superlattices based on vdWHs are discussed to showcase the importance of vdWHs as a platform for novel condensed matter physics. Finally, the crucial challenges towards ideal vdWHs with high performance are discussed, and the outlook for future development is presented. By the systematical integration of synthetic strategies and applications, we hope this review can further light up the rational designs of vdWHs for emerging applications.

Activation of anthracite combustion by copper acetate:mechanism,effect of particle size and introduction method

This paper addressed the efect of copper acetate on the combustion characteristics of anthracite depending on the fractional composition of fuel and additive introduction method.Anthracite was impregnated with 5 wt%of Cu(CH_(3)COO)_(2)by mechanical mixing and incipient wetness impregnation.Four anthracite samples of diferent fraction with d<0.1 mm,d=0.1-0.5 mm,d=0.5-1.0 mm,and d=1.0-2.0 mm were compared.According to EDX mapping,incipient wetness impregnation provides a higher dispersion of the additive and its uniform distribution in the sample.The ignition and combustion characteristics of the modifed anthracite samples were studied by thermal analysis and high-speed video recording of the processes in a combustion chamber(at heating medium temperature of 800℃).It was found that copper acetate increases anthracite reactivity,which was evidenced by decreased onset temperature of combustion(ΔT_(i))by 35-190℃and reduced ignition delay time(Δτ_(i))by 2.1-5.4 s.Copper acetate reduces fuel underburning(on average by 70%)in the ash residue of anthracite and decreases the amount of CO and NO_(x)in gas-phase products(on average by 18.5%and 20.8%,respectively).The mechanism for activation of anthracite combustion by copper acetate is proposed.