Mechanical property and deformation mechanism of gold nanowire with non-uniform distribution of twinned boundaries:A molecular dynamics simulation study

The mechanical property and deformation mechanism of twinned gold nanowire with non-uniform distribution of twinned boundaries(TBs)are studied by the molecular dynamics(MD)method.It is found that the twin boundary spacing(TBS)has a great effect on the strength and plasticity of the nanowires with uniform distribution of TBs.And the strength enhances with the decrease of TBS,while its plasticity declines.For the nanowires with non-uniform distribution of TBs,the differences in distribution among different TBSs have little effect on the Young's modulus or strength,and the compromise in strength appears.But the differences have a remarkable effect on the plasticity of twinned gold nanowire.The twinned gold nanowire with higher local symmetry ratio has better plasticity.The initial dislocations always form in the largest TBS and the fracture always appears at or near the twin boundaries adjacent to the smallest TBS.Some simulation results are consistent with the experimental results.

RELOCATION ALGORITHM FOR NON-UNIFORM DISTRIBUTION IN MOBILE SENSOR NETWORK

Energy is the determinant factor for the survival of Mobile Sensor Networks(MSN).Based on the analysis of the energy distribution in this paper,a two-phase relocation algorithm is proposed based on the balance between the energy provision and energy consumption distribution.Our main objectives are to maximize the coverage percentage and to minimize the total distance of node movements.This algorithm is designed to meet the requirement of non-uniform distribution network applications,to extend the lifetime of MSN and to simplify the design of the routing protocol.In ad-dition,test results show the feasibility of our proposed relocation algorithm.

Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles

A computational study was carried out on bubble dynamic behaviors and bubble size distributions in a pressurized lab-scale gas-solid fluidized bed of Geldart A particles.High-resolution 3-D numerical simulations were performed using the two-fluid model based on the kinetic theory of granular flow.A finegrid,which is in the range of 3–4 particle diameters,was utilized in order to capture bubble structures explicitly without breaking down the continuum assumption for the solid phase.A novel bubble tracking scheme was developed in combination with a 3-D detection and tracking algorithm(MS3 DATA)and applied to detect the bubble statistics,such as bubble size,location in each time frame and relative position between two adjacent time frames,from numerical simulations.The spatial coordinates and corresponding void fraction data were sampled at 100 Hz for data analyzing.The bubble coalescence/break-up frequencies and the daughter bubble size distribution were evaluated by using the new bubble tracking algorithm.The results showed that the bubble size distributed non-uniformly over cross-sections in the bed.The equilibrium bubble diameter due to bubble break-up and coalescence dynamics can be obtained,and the bubble rise velocity follows Davidson’s correlation closely.Good agreements were obtained between the computed results and that predicted by using the bubble break-up model proposed in our previous work.The computational bubble tracking method showed the potential of analyzing bubble motions and the coalescence and break-up characteristics based on time series data sets of void fraction maps obtained numerically and experimentally.

Study of the Non-Uniform Distribution of Earthquake Risk Within Potential Sources

Potential sources are aggregates of probable future epicenters.In this area,for source models currently,in common use for seismic risk analysis in China,the mean area of each potential source is about 3000-4000 km2.It is assumed that seismic risk has a uniform distribution within the range of each potential source,but studies have shown that the uniform distribution model to a large extent may give an underestimation of the seismic risk.In this paper,the relative distribution of historical epicenters in space within potential sources is discussed,a method is proposed to quantitatively describe the non-uniform distribution of strong earthquakes within potential sources,and some preliminary results are given.By using the results of this paper,seismic risk analysis and seismic zonation can be made more scientific and more reasonable.

Effects of the inlet particle spatial distribution on the performance of a gas-solid cyclone separator

The present study was aimed at the inlet particle spatial distribution of a gas-solid separator with high solid loading and investigated its effects on cyclone performance and the inner flow pattern.The flow fields of a cyclone with different rectangular particle flow areas on the inlet surface were numerically simulated using a four-way coupling method.The simulated results indicate that reducing the inlet particle flow area and lowing the inlet particle position can effectively reduce the scattered particles inside the cyclone separator and enhance the separation performance.Vertically gathering the particles to the centerline can also weaken the particle back-mixing.The particles near the roof account for the swirling particle ceiling phenomenon.The inlet particle spatial distribution affects the pressure drop mainly by affecting the gas tangential velocity in the cylinder body.Moreover,compared to the hori-zontal particle distribution on the inlet surface,the vertical particle distribution has greater effects on cyclone performance.

Stress analytical solution for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform distributed pressure

The stress state around circular openings,such as boreholes,shafts,and tunnels,is usually needed to be evaluated.Solutions for stresses,strains and ultimate bearing capacities of pressurized hollow cylinder are common cases.Stress analytical method for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform pressure on the outer surface and uniform radial pressure on the inner surface is given.The power series method of complex function is used.The stress analytical solution is obtained with the assumption that two layers of a cylinder are fully contacted.The distributions of normal and tangential contact stress along the interface,tangential stress on the inner boundary and stresses in the radial direction at θ=0°,45° and 90°,are obtained.An example indicates that,when the elastic modulus of the inner layer of a double-layered thick-walled cylinder is smaller than that of the outer layer,the tangential stress is smaller than that in the corresponding point for a traditional cylinder composed of homogeneous materials.In that way,stress concentration at the inner surface can be alleviated and the stress distribution is more uniform.This is a capable way to enhance the elastic ultimate bearing capacity of thick-walled cylinder.

Downlink SINR and Rate Distribution of Ultra-Dense Het Nets with Burst Traffic

SINR distribution and rate overage distribution are crucial for optimization of deployment of Ultra-dense Het Nets.Most existing literatures assume that BSs have full queues and full-buffer traffic.In fact,due to ultra-dense deployment of small cells,traffic in small cell varies dramatically in time and space domains.Hence,it is more practical to investigate scenario with burst traffic.In this paper,we consider a two-tier non-uniform ultra-dense Het Net with burst traffic,where macro BSs are located according to Poisson Point Process(PPP),and pico BSs are located according to Poisson Hole Process(PHP).The closed-form expressions of SINR distribution and rate distribution are derived,and then validated through simulation.Our study shows that different from the result of full buffer case,the SINR distribution and rate distribution of users depend on the average transmission probabilities of BSs in burst traffic case.

The Evolution of the Charge Density Distribution Function for Spherically Symmetric System with Zero Initial Conditions

The evolution of the charge density distribution function is simulated for both the case of a uniformly charged sphere with zero initial conditions and for the case of a non-uniform charged sphere. For the case of a uniformly charged sphere the comparison of a numerical result and an exact analytical demonstrated the agreement between the results. The process of “scattering” of a charged system under the influence of its own electric field has been illustrated on the basis of both the particle-in-cell method and the solution of the Cauchy problem for vector functions of the electric field and vector velocity field of a charged medium.

Experimental study of the effects of non-uniformly distributed fine soil on mechanical properties of Shenyang–Dandong Railway coarse-grained soil

The stress produced by repeated train loads decreases with increasing railway subgrade bed depth, and slightly weathered coarse particles of subgrade bed fillings can be broken at different levels under continuous load. Thus, the mass of fine soil, with a diameter of not more than 0.075 mm, is different at different depths. Fine soil is also sensitive to frost heave and thaw settlement. In order to study the effects of non-uniformly distributed fine soil on the mechanical properties of coarse-grained soil of the Shenyang-Dandong Railway, triaxial tests were conducted with three types of specimens, un- dergoing six freeze-thaw cycle numbers （0, 1, 3, 7, 9, 12） and three confining pressures （100, 200, 300 kPa）. The freezing temperature is -5 ~C and the thawing temperature is ＋15 ~C. The stress-strain behavior, static strength, resilient modulus, cohesive force and the angle of internal friction were measured for different tested specimens. As a result, the law of static strength and resilient modulus of different specimens following the increase of freeze-thaw cycles under three confining pressures is obtained. The changing law of cohesive force and friction angle of three specimens following the increase of freeze-thaw cycles is also calculated, and the different results of different specimens are also compared.

Improving the Performance of Fixed-Bed Catalytic Reactors by Innovative Catalyst Distribution

A comprehensive mathematical model is developed to simulate the interactions of the complex processes that take place in typical catalytic chemical reactors. This mathematical model includes correlations representing various modes of mass transport and chemical reactions. To illustrate the application and value of this approach for reactor optimizations, the model is applied to the case of series reactions with a desirable intermediate compound and the risk of degradation of this compound if the process conditions are not optimized. The modeling results show that in such cases, which are very common in practice, replacing the conventional uniform catalyst distribution with a novel non-uniform distribution will significantly improve the performance of the reactor and the production of the desirable compound. Various catalyst distribution options are compared, and a novel non-uniform loading of catalyst is identified that gives a much better performance compared to the conventional approach. The model is versatile and useful for both the design as well as the optimization of the catalytic fixed-bed reactors in a wide variety of reactor and reaction conditions.

Quantitative research of annual runoff distribution characteristics in the Dagujia River basin,Yantai,China

Mann-Kendall method and minimum variance method are used in this study to analyze the mean value variable-point of the runoff data observed by Fushan Hydrological Station in the Dagujia River basin from 1966 to 2004. Based on the results, the runoff time is divided into four periods with the similar hydrological variation character. The annual runoff distribution characters in the Dagujia River basin are discussed by using the non-uniform coefficients, concentration degree and concentration period, variation range, etc. The results indicate that: (1) River runoff is very unevenly distributed throughout the year in Dagujia River. About 90% of runoff is in the period from June to October, while the runoff from November to April of the next year is lower. (2) The annual runoff distribution characters during 1966-1971 are very similar to that of 1982-1996, and the runoff of 1972-1981 is almost similar to that of 1997-2004. (3) The annual runoff distribution characters have changed obviously during 1997-2004 compared with the other periods, which makes it more difficult to exploit and use the water resource in the future.

Numerical analysis on the transport properties and residence time distribution of ribbon biomass particles in a riser reactor based on CFD-DEM approach

A bended ribbon biomass particle model was developed to explore the dynamic transport properties inside a riser reactor.Residence time distribution(RTD)of the particles was analyzed by using the Eulerian-Lagrange method.The effects of sampling height,particle density,particle size and gas-to-solid mass ratio on RTD were investigated.The coupled Computational Fluid Dynamics and Discrete Element Method(CFD-DEM)model was verified firstly by experimental data on pressure drop and residence time distribution density function.The simulation results demonstrated that the ribbon biomass particles display a typical annular-core spatial distribution during transportation.The RTD of particles exhibit an approximate single-peaked normal distribution.The mean residence time(MRT)can reach up to 0.7 s when the particle density is 1200 kg/m^(3).Particle with higher density has longer mean residence time.The flow patterns are closer to plug flow if particle length over 12 mm.The particle flow pattern is not sensitive to changes in particle density and size,while the gas-to-material mass ratio has a significant impact on it.

Non-uniform operative temperature distribution characteristics and heat-source-controlled core-area range of local heating radiators

Heating the whole space,which is currently used in northern China,leads to high energy consumption and substantial pollution.A transition to local heating has the potential to help address this problem.In this paper,the effects of radiator-related parameters(position,power,and size)and room-related parameters(aspect ratio and height)on local heating were studied.Two evaluation indices,the effective coefficient of operative temperature(OTEC)and the effective coefficient of local heating(LHEC),were proposed.In addition,the heat source-control core-area(HSCCA)was proposed,and the effect range of heat sources in the space was evaluated by the attenuation of operative temperature.The findings demonstrated that the radiator position has a greater influence on local heating than size.When the position of the radiator was changed from"close to the inner wall"to"close to the outer wall",the LHEC(the interior one-quarter of room is a local heating zone)was found to decrease by 73%.The size of the radiator,which is close to the inner wall,doubled or quadrupled,and the LHEC increased by 9%and 18%.Moreover,rooms with a larger aspect ratio or small room height were found to be the most optimal for local heating applications.The area of the HSCCA decreased as the position of the radiator approached the outer wall.The findings of this study can be used as a design reference for the radiator when the heating mode changes from"full-space heating"to"local heating".

Effect of non-uniform stress characteristics on stress measurement in specimen

There is a remarkable difference in stress distribution between a specimen and a plate removed from the specimen.The plate presents a uniform stress distribution whereas the specimen presents a non-uniform stress distribution.Firstly,the real stress distributions in plates with thickness of 30,40 and 50 mm and then in the specimens were obtained through simulation and X-ray surface stress measurement.Secondly,in order to study the impact of specimens shapes and processing ways on the results accuracy,two irregular shapes (parallelogram and trapezoid) and two processing ways (saw and electron discharge machining (EDM)) were compared and analyzed by simulation and experiment using layer removal method,then the specimen effects on measurement results were evaluated.The results show that:1) the non-uniform stress distribution characteristics of the specimen near the surface of the cut is significant,the range of non-uniform stress distribution is approximately one-thickness distance away from the cut,and it decreases gradually along the depth;2) In order to ensure the stability in the results,it is suitable to take the specimen plane size 2-3 times of its thickness;3) Conventional processing methods have little effect on experimental results and the average deviation is less than 5%.

S/N Ratio of 4-Channel A/D Geological Radar Non-uniform Sampling Signals

Using the quantitative error probability density method we studied the S/N ratio of alternately sampled signals digitized by a 4-channel A/D. A complete expression for the S/N ratio of a 4-channel A/D non-uniform sampling signal was deduced. First we obtained an expression for the S/N ratio of a 1-channel A/D uniform sampling signal when the sampling frequency was equal to or greater than 2 times the frequency of the sampled signal. Based on the S/N ratio of a 2-channel A/D,alternating,non-uniform sampling signal,we analyzed the distribution of quantitative error using the quantitative error probability density method and the distribution convolution formula. From this the S/N ratio expression of a 4-channel A/D sampling signal was deduced. The simulation result shows that the deduced expression is correct.

Influence of Non-uniform Elevated Temperature on the Structural Stability and Strength of Gypsum-Sheathed Cold-Formed Steel Beam Channel Members

The objective of this paper is to computationally explore the structural stability and strength of gypsum-protected CFS(cold-formed steel)beam channel sections under non-uniform elevated temperatures when exposed to standard fire on one side of the panel and subjected to pure bending.When a CFS member is subjected to fire(or thermal gradients)its material properties change-but this change happens around the cross-section and along the length creating a member which is potentially non-uniform and unsymmetrical in its response even if the apparent geometry is uniform and symmetric.Computational finite element models were analyzed in ABAQUS to establish steady-state thermal gradients of interest.Existing test data were utilized to develop the temperature dependence of the stress-strain response.The time-dependent temperature distribution on the cross-sections obtained from heat transfer analysis was later used in the stability and collapse analyses.The stability of the models was explored to characterize how local,distortional,and global buckling of the member evolves under both uniform and non-uniform temperature distributions.Finally,collapse simulations were performed to characterize the strength under pure bending and explore directly the evolution of strength under the influence of non-uniform temperature.

DESCRIPTIONS OF THE CYLINDRICAL HELIX WITH NURBS

The representation of a cylindrical helix by Non-Uniform Rational B-Spline (NURBS) curves is presented in this paper. A method is proposed to assess the influences produced by different ways to determine the control ver-texes positions of helix. The error distribution cases between the helix approximated by NURBS curves and the original theoretical one are also analyzed. Meanwhile a computational method that guarantees the precision requirements is presented.

A Generalized Layered Radiative Transfer Model in the Vegetation Canopy

In this paper, a generalized layered model for radiation transfer in canopy with high vertical resolution is developed. Differing from the two-stream approximate radiation transfer model commonly used in the land surface models, the generalized model takes into account the effect of complicated canopy morphology and inhomogeneous optical properties of leaves on radiation transfer within the canopy. In the model, the total leaf area index （LAI） of the canopy is divided into many layers. At a given layer, the influences of diffuse radiation angle distributions and leaf angle distributions on radiation transfer within the canopy are considered. The derivation of equations serving the model are described in detail, and these can deal with various diffuse radiation transfers in quite broad categories of canopy with quite inhomogeneons vertical structures and uneven leaves with substantially different optical properties of adaxial and abaxial faces of the leaves. The model is used to simulate the radiation transfer for canopies with horizontal leaves to validate the generalized model. Results from the model are compared with those from the two-stream scheme, and differences between these two models are discussed.

Influences of Reinforcement on Differential Drying Shrinkage of Concrete

Shrinkage strain of concrete specimen with different reinforcement configuration was measured at various depths from the exposed surface by using several pairs of displacement sensors. Only one surface of the concrete specimen was exposed to dry condition during the experiment. The results show that differential shrinkage strain occurs in both plain and steel reinforced concrete specimens according to depths from the exposed surface. A higher reinforcement ratio results in a greater restraint against shrinkage of concrete nearby reinforcement rebar and a worse differential shrinkage strain distribution in the concrete specimen. The restraint against shrinkage of concrete becomes lower with the increasing distance from reinforcement rebar. Under the same reinforcement arrangement, a higher free shrinkage of concrete leads to a stronger restraint against shrinkage and a higher shrinkage stress formation in local concrete. The relationship between shrinkage strain and reduction of relative humidity in reinforced concrete structure is far different from that in plain concrete.

An Analytical Model for Torus Networks in the Presence of Batch Message Arrivals with Hot-spot Destinations

Interconnection networks are hardware fabrics supporting communications between individual processors in multi- computers. The low-dimensional k-ary n-cubes （or torus） with adaptive wormhole switching have attracted significant research efforts to construct high-performance interconnection networks in contemporary multi-computers. The arrival process and destination distribution of messages have great effects on network performance. With the aim of capturing the characteristics of the realistic traffic pattern and obtaining a deep understanding of the performance behaviour of interconneetion networks, this paper presents an analytical model to investigate the message latency in adaptive-routed wormhole-switched torus networks where there exists hot-spot nodes and the message arrivals follow a batch arrival process. Each generated message has a given probability to be directed to the hot-spot node. The average degree of virtual channel multiplexing is computed by the GE/G/1/V queueing system with finite buffer capacity. We compare analytical results of message latency with those obtained through the simulation experiments in order to validate the accuracy of the derived model.