Controlled Twill Surface Structure Endowing Nanofiber Composite Membrane Excellent Electromagnetic Interference Shielding

Inspired by the Chinese Knotting weave structure,an electromagnetic interference(EMI)nanofiber composite membrane with a twill surface was prepared.Poly(vinyl alcohol-co-ethylene)(Pva-co-PE)nanofibers and twill nylon fabric were used as the matrix and filter templates,respectively.A Pva-co-PEMXene/silver nanowire(Pva-co-PE-MXene/AgNW,PM_(x)Ag)membrane was successfully prepared using a template method.When the MXene/AgNW content was only 7.4 wt%(PM_(7.4)Ag),the EMI shielding efficiency(SE)of the composite membrane with the oblique twill structure on the surface was 103.9 dB and the surface twill structure improved the EMI by 38.5%.This result was attributed to the pre-interference of the oblique twill structure in the direction of the incident EM wave,which enhanced the probability of the electromagnetic waves randomly colliding with the MXene nanosheets.Simultaneously,the internal reflection and ohmic and resonance losses were enhanced.The PM_(7.4)Ag membrane with the twill structure exhibited both an outstanding tensile strength of 22.8 MPa and EMI SE/t of 3925.2 dB cm^(-1).Moreover,the PM_(x)Ag nanocomposite membranes demonstrated an excellent thermal management performance,hydrophobicity,non-flammability,and performance stability,which was demonstrated by an EMI SE of 97.3%in a high-temperature environment of 140℃.The successful preparation of surface-twill composite membranes makes it difficult to achieve both a low filler content and a high EMI SE in electromagnetic shielding materials.This strategy provides a new approach for preparing thin membranes with excellent EMI properties.

Experimental study on interaction between membrane structures and wind environment

The interaction between membrane structures and their environment can be either static or dynamic. Static interaction refers to interaction with static air, while dynamic interaction refers to wind and its effects. They can be evaluated by two parameters, added mass and radiation/aerodynamic damping, which are experimentally investigated in this study. The study includes the effects of both the static and dynamic interaction on structural dynamic characteristics, and the relationship between the interaction parameters and the covered area of a membrane structure for the static interaction and the relationship between the interaction parameters and wind direction and speed for the dynamic interaction. Experimental data show that the dynamic interaction is strongly correlated with the structural modes, i.e., the interaction of the symmetric modes is much larger than the anti-synmletric modes; and the influence of the dynamic interaction is significant in wind-induced response analysis and cannot be ignored. In addition, it is concluded that the structural natural frequency is remarkably decreased by this interaction, and the frequency band is significantly broadened.

Multi-objective optimization of membrane structures based on Pareto Genetic Algorithm

A multi-objective optimization method based on Pareto Genetic Algorithm is presented for shape design of membrane structures from a structural view point.Several non-dimensional variables are defined as optimization variables,which are decision factors of shapes of membrane structures.Three objectives are proposed including maximization of stiffness,maximum uniformity of stress and minimum reaction under external loads.Pareto Multi-objective Genetic Algorithm is introduced to solve the Pareto solutions.Consequently,the dependence of the optimality upon the optimization variables is derived to provide guidelines on how to determine design parameters.Moreover,several examples illustrate the proposed methods and applications.The study shows that the multi-objective optimization method in this paper is feasible and efficient for membrane structures;the research on Pareto solutions can provide explicit and useful guidelines for shape design of membrane structures.

Analysis of tensioned membrane structures considering cable sliding

In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. On the other hand, large deflections are expected and sliding between the membrane and the cables is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface on the structural behavior. Three analysis models were devised to fulfill this purpose: (1) The membrane element shares nodes with the cable element; (2) The cable can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface - based contact algorithm. The results from three analysis models are compared, showing that cable sliding has only little influence on the structure shape and on the stress distributions in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.

Large deformation and wrinkling analyses of bimodular structures and membranes based on a peridynamic computational framework

In this paper,the quasi-static large deformation,wrinkling and fracture behaviors of bimodular structures and membranes are studied with an implicit bond-based peridynamic computational framework.Firstly,the constant and tangential stiffness matrices of the implicit peridynamic formulations for the nonlinear problems are derived,respectively.The former is con structed from the linearization of the bond strain on the basis of the geometric approximation while the latter is established according to the linearization of the pairwise force by using first-order Taylor’s expansion.Then,a bimodular material model in peridynamics is developed,in which the tensile or compressive behavior of the material at each point is conveniently described by the tensile or compressive states of the bonds in its neighborhood.Moreover,the bimodular material model is extended to deal with the wrinkling and fracture problems of membranes by setting the compressive micro-modulus to be zero.In addition,the incremental-iterative algorithm is adopted to obtain the convergent solutions of the nonlinear problems.Finally,several representative numerical examples are presented and the results demonstrate the accuracy and efficiency of the proposed method for the large deformation,wrinkling and fracture analyses of bimodular structures and membranes.

Support surface pore structures matter: Effects of support surface pore structures on the TFC gas separation membrane performance over a wide pressure range

In this work, the effects of support surface pore structures(including surface pore size, surface pore density and surface porosity) on the performance of thin film composite(TFC) gas separation membrane over a wide pressure range(from 0.3 to 2.0 MPa) were studied. To fulfill it, the polysulfone(PSf) supports with different surface pore structures were prepared. Two kinds of wide-accepted polymeric membrane materials, i.e., polyvinylamine(PVAm) and Pebax 1657 copolymer, were used as skin layer materials. We pointed out for the first time that the support surface average pore size and pore density could affect the chain mobility of polymer of skin layer at the support surface pore entrance, then, can affect the TFC membrane performance. Besides, we also discussed the effects of support on the TFC membrane performance when the feed pressure changes for the first time. This work can provide guidance for choosing a suitable support for TFC gas separation membrane.

Wind-induced response analysis of conical membrane structures

Conical membrane structures are a typical form of tensile membrane structures. In the past, most studies focused on the static performance, but few on dynamic performance. In this paper, systematic parameter analysis of wind-induced response of conical membrane structures has been performed with nonlinear random simulation method in a time domain, by considering some parameters, such as span, rise-span ratio, prestress of membrane, and characteristic of the approaching wind flow. Moreover, formulas of the dynamic coefficient and nonlinear adjustment factor are advised, which can be conveniently used in wind-resistant design of conical membrane structures.

Deformation of wrinkled membrane inflatable structures under concentrated loads

The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the membrane theory when wrinkles appeared and determined the wrinkle region. The wrinkled deformation was obtained based on the relaxed energy function. The effects of inflation pressure and concentrated loads on the wrinkle angle were analyzed and the deformation was obtained at the apex of structure. According to the numerical analysis, the shape of deformed meridians with wrinkles was obtained.

Smooth cutting pattern generation technique for membrane structures using geodesic line on subplane and spline interpolation

Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approximation methods were used to flatten the strip for the generation of a smooth pattern.This search approach is very simple,and the geodesic line could be easily attained by the proposed method without the need for a difficult computation method.Smooth cutting patterning can also be generated by spline approximation without the noise in discrete nodal information.Additionally,the geodesic cutting pattern saved about 21%of the required area for the catenary model due to the reduction of the curvature of the planar pattern seam line.

H_2/CO_2 Gas Transport Performance in Poly(Ethylene Oxide) Reverse-selective Membrane with Star-like Structures

A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy(FTIR). The thermal property and inter-segmental distance of polymer chain were investigated by differential scanning calorimetry and wide-angle X-ray diffraction, respectively. The density was determined by hydrostatic weighing method. The gas permeability, solubility and diffusivity of CO_2 and H_2 were investigated in the star-like PEO membranes. The relationship between gas permeation performances and physical properties was also discussed. The membrane exhibits outstanding CO_2 permeability(about 9.7×10^(-11) cm^3(STP) cm/cm^2/s/Pa) and CO_2/H_2 selectivity(about 11) compared with other membranes.

Lipid-Protein Microinclusions in the Morphological Structures of Organelle Membranes Studied by Fluorescent Confocal Microscopy

Peculiar properties of morphological structures of organelle membranes were studied by fluorescent confocal microscopy. The list of objects in our experiments was represented by mitochondria, chloroplasts and vacuoles. During this study, identification of lipid microinclusions having the form of such lipid-protein structural microformations as lipid-protein microdomains, vesicles and membrane tubular structures (cytoplasmic transvacuolar strands and nanotubes) located in organelle membranes or bound up with them was conducted. Such membrane probes as laurdan, DPH, ANS and bis-ANS were used. Comparison of fluorescence intensity of these membrane probes was conducted. This investigation of the morphological properties of lipid-protein structural microformations was accompanied with analysis of 1) the phase state and 2) dynamics of microviscosity variations in the membrane elements of isolated plant cell organelles. Distributions of laurdan fluorescence generalized polarization (GP) values for the membrane on the whole and for the intensively fluorescing membrane segments were obtained. It was discovered that the microviscosity of intensively fluorescing membrane segments essentially differed from the microviscosity of the rest part of the membrane. In conclusion, some results of the study of peculiar properties of lipid-protein structural microformations related to the structure of organelle membranes and the discoveries made in this investigation are discussed.

Deployment Characteristics of Braid Coated Bi-Convex Tape and Bi-SMA Convex Tape Booms for Deployable Membrane Structures

The purpose of this paper is to demonstrate and investigate the concepts of new deployable boom systems, which consist of the BCON （braid coated bi-convex tape） boom and the SMA-BCON （braid coated bi-shape memory alloy convex tape） boom. Both booms are developed for the deployable membrane structures such as solar sails, thin membrane solar array panels, deorbit mechanisms for small satellites and reflectors of space solar power satellite, etc. BCON booms can store around polygonal or cylindrical center hub, and the booms can deploy by the stepwise manner by releasing a constraint mechanism which pins the boons into two or three points for the total length. SMA-BCON booms are mainly developed for a square center body systems, and SMA is adapted on the bent po^nts of the booms where stored around each edge of the center hub. Through the deployment experiments of both booms, the stepwise deployment behavior and its tendency are obtained. The design concept of BCON boom and SMA-BCON hnnm i~ demonstrated through this study.

Aerodynamic unstable critical wind velocity for three-dimensionalopen cable-membrane structures

The aerodynamic unstable critical wind velocity for three-dimensional open cable-membrane structures is investigated. The geometric nonlinearity is introduced into the dynamic equilibrium equations of structures. The disturbances on the structural surface caused by the air flow are simulated by a vortex layer with infinite thickness in the structures. The unsteady Bernoulli equation and the circulation theorem are applied in order to express the aerodynamic pressure as the function of the vortex density. The vortex density is then obtained with the vortex lattice method considering the coupling boundary condition. From the analytical expressions of the unstable critical wind velocities, numerical results and some useful conclusions are obtained. It is found that the initial curvature of open cable-membrane structures has clear influence on the critical wind velocities of the structures.

OPTIMUM CUTTING ANALYSIS METHOD OF MEMBRANE STRUCTURE

By the optimum theory, a new cutting analytical method of the membrane structure is developed. The B-spline curve is applied to make smooth the boundary of the membrane strip. By this method, the cutting accuracy is improved. Finally, a cutting analysis example of a tension membrane structure is given.

Manipulation of confined structure in alcohol-permselective pervaporation membranes

Alcohol-permselectivity pervaporation has been arousing increasingly more attention in bioalcohol production due to the advantages of environmental friendliness, low energy consumption and easy coupling with fermentation process. With the intrinsic feature of larger molecules preferentially permeating and the consequent inferiority in selective diffusion, the development of alcohol-permselective membrane is relatively retarded compared with water-permselective membrane. This review presents the prevalent membrane materials utilized for alcohol-permselective pervaporation and emphatically expatiates the representative and important developments in the past five years from the aspect of tuning confined structure in membranes. In particular, the diverse structure tuning methods are described with the classifications of physical structure and chemical structure. The corresponding structure-performance relationships in alcohol-permselective pervaporation membranes are also analyzed to identify the objective of structure optimization. Furthermore, the tentative perspective on the possible future directions of alcohol-permselective pervaporation membrane is briefly presented.

Construction of molecule-selective mixed matrix membranes with confined mass transfer structure

Extraordinary mass transfer phenomenon is usually found when the small molecules pass through a confined structure, whose effective size is commensurate with the mean free path of the molecules. Small changes in the confined mass transfer structure(including size, morphology and properties) will lead to significant fluctuations of the mass transfer coefficient. The mass transfer of the penetrant molecules in the dense membranes for pervaporation, gas separation and so on, is located in the scope of confined mass transfer. Incorporating nanofillers into polymer matrix to construct mixed matrix membranes(MMMs) is an effective approach to tune the confined mass transfer structure and enhance the performance of the widely used polymeric membranes. This review focuses on the construction and manipulation of the confined structure in the polymeric membranes via incorporating one-dimensional(1D), two-dimensional(2D) and three-dimensional(3D) fillers.The comparison of the MMMs for pervaporation is summarized, and the research prospective of the MMMs is provided.

FORMATION AND MICROSTRUCTURE OF POLYETHYLENE MICROPOROUS MEMBRANES THROUGH THERMALLY INDUCED PHASE SEPARATION

Microporous membranes of low-high density polyethylene and their blends were prepared bythermally-induced phase separation of polymer/long-aliphatic chain alcohol (diluent) mixtures.The microstructures of this particular membrane, which depends on the diluent properties,polymer concentration and cooling rate, were observed by scanning electron microscopy.'Beehive-type,'leafy-like, and lacy porous structure morphologies can be formed,depending onthe blend composition and phase separation conditions, which were discussed by the polymer anddiluent crystallization processes.

Fabrication and catalytic behavior of hierarchically-structured nylon 6 nanofiber membrane decorated with silver nanoparticles

A hierarchically‐structured nylon 6 (PA6) nanofiber membrane decorated with silver nanoparticles (Ag NPs) was fabricated by electrospinning and impregnation methods. The as‐fabricated hierarchically‐structured Ag/PA6 nanofiber membrane (HS‐Ag/PA6 NM) exhibits a morphology in which Ag NPs are deposited on the surfaces of both thick fibers and thin fibers. The content and size of theAg NPs can be controlled by varying the concentration of the silver colloid solution. Compared with the non‐hierarchically‐structured Ag/PA6 nanofiber membrane, HS‐Ag/PA6 NM has a higher specificsurface area and exhibits a higher degradation rate for methylene blue of 81.8%–98.1% within2 h. HS‐Ag/PA6 NM can be easily recycled and exhibits good reusability. It retains a degradation rate for methylene blue of 83.5% after five consecutive cycles. The hierarchically‐structured nanofiber membrane is therefore a potential nanocatalyst.

Enhanced air filtration performance under high-humidity condition through electrospun membranes with optimized structure

The separation stability under high-humidity is significant in practical applications for air filters.Herein,hydrophobic polyvinyl chloride(PVC)nanofiber filters with bead-on-string structure are designed to steadily remove particle matter under high relative humidity of 90%-95%.The developed hydrophobic filters possess comparable separation performance with the hydrophilic one,but greatly enhanced stability.After the introduction of beadon-string structure,the filtration performance can be furtherly improved due to the formed large cavities and hydrophobicity.Such hydrophobic PVC filters can be promising candidates for air purification in practical applications especially in wet seasons.

Structure and resistance of concentration polar layer on cation exchange membrane-solution interface

Membrane/solution interface consists of a neutral concentration polai layer(CPL) and a charge layer(CL) under external electrical field, and the neutral CPL can be neglected under high frequency AC electrical field. The relationship of CL thickness e with electrolyte concentration C and fixed ion exchange sites density σ in membrane surface layer can be expressed as e