Tioconazole(TCZ), a broad-spectrum antifungal agent, has significant activity against Candida albicans and other Candida species, and therefore, it is indicated for the topical treatment of superficial mycoses.The mai...Tioconazole(TCZ), a broad-spectrum antifungal agent, has significant activity against Candida albicans and other Candida species, and therefore, it is indicated for the topical treatment of superficial mycoses.The main goal of this work is to report an exhaustive identification and characterization procedure to improve and facilitate the online quality control and continuous process monitoring of TCZ in bulk material and loaded in two different dosage forms: ovules and nail lacquer. The methodologies were based on thermal(differential scanning calorimetry(DSC), melting point, and thermogravimetry(TG)),spectroscopic(ultraviolet(UV), Raman, near infrared(NIR), infrared spectroscopy coupled to attenuated total reflectance(FTIR-ATR), and nuclear magnetic resonance(NMR)), microscopic and X-ray diffraction(XRD). The TCZ bulk powder showed a high crystallinity, as observed by XRD, with a particles size distribution(3–95 mm) resolved by microscopic measurements. TCZ melting point(82.8 °C) and a degradation peak centered at 297.8 °C were obtained by DSC and DTG, respectively. An unambiguous structure elucidation of TCZ was obtained by mono-and two-dimensional1 H and13 C NMR spectral data analysis. The FTIR-ATR, Raman and NIR spectra of both the raw material and the commercial products were analyzed and their characteristic bands were tabulated. The best methods for TCZ identification in ovules were DSC, TG, XRD, NIR and Raman, while NIR and FTIR-ATR were the most appropriate techniques to analyze it in the nail lacquer. DSC, TG, DRX, Raman, FTIR-ATR and NIR spectroscopy are effective techniques to be used in online process analysis, because they do not require sample preparation, and they are considerably sensitive to analyze complex samples.展开更多
Vaginal dosage forms are seen as a viable option for empowering women to protect themselves from the risk of HIV transmission. Because of limited research in the field, there is a lack of suitable dissolution methods ...Vaginal dosage forms are seen as a viable option for empowering women to protect themselves from the risk of HIV transmission. Because of limited research in the field, there is a lack of suitable dissolution methods established for determination of drug release from vaginal formulations inside the vaginal tract. The main aim of this study was to develop a simple, reliable and reproducible in vitro release method for evaluation of solid vaginal dosage forms (VDFs) which was hoped to exhibit a close in vitro-in vivo correlation. Dapivirine, a drug being developed as a microbicide and a well established marketed anti fungal drug, Clotrimazole were used as model drugs. Two doses (0.5 mg and 1.25 mg) of Dapivirine were prepared as novel rapidly disintegrating, bioadhesive tablets. Clotrimazole 100 mg, prepared in house as conventional release tablets and commercially available Canesten (Clotrimazole tablet 100 mg) were used. The in vitro drug release testing of these tablets was carried out using a designed system which consisted of modified USP dissolution Apparatus II in conjunction with Enhancer cell (as sample holder) in 150 ml capacity flasks instead of the standard 900 ml flasks. The suitability of the system was investigated for variable parameters such as formulation types, drug concentration, stirring speeds, media volume and comparison of in house product with marketed product. The method was successfully optimized at a volume of 100 ml and a low speed of 25 rpm at pH 4 and was found sensitive enough to distinguish between formulations and evaluate products of different strengths. A linear drug release profile (R2 = 0.99) was obtained in case of Dapivirine, indicating that drug release is controlled by diffusion. The developed dissolution system has a potential to exhibit a good in vitro-in vivo correlation in addition to carrying out routine dissolution tests for solid VDFs.展开更多
Oral candidiasis is a common disease in patients with dry mouth. In this study, film dosage forms (FD) incorporating miconazole nitrate, an antifungal agent, were prepared with water-soluble polysaccharide and cyclode...Oral candidiasis is a common disease in patients with dry mouth. In this study, film dosage forms (FD) incorporating miconazole nitrate, an antifungal agent, were prepared with water-soluble polysaccharide and cyclodextrin (CD). The dissolution profiles of the drug from the FDs were investigated in limited dissolution medium. Soft films were obtained from sodium alginate containing 0.5% α-CD, β-CD, or γ-CD. Most FDs were easy to handle, though the film tearing resistance was lower than that of CD-free FDs. Addition of CD to the FD accelerated the drug dissolution rate. Interestingly, this phenomenon was also observed in FDs prepared with pullulan. In contrast, acceleration of the drug dissolution rate was not observed when CD polymer was added to the base solution. The initial drug dissolution rate was controllable by the amount of CD added to the FD. Therefore, FDs prepared with these materials are useful to treat oral candidiasis in patients with dry mouth syndrome.展开更多
Film dosage forms (FDs) containing miconazole (MCZ) for the treatment of oral candidiasis were prepared using water-soluble polysaccharides, and the dissolution profiles of MCZ from the FDs were investigated. In addit...Film dosage forms (FDs) containing miconazole (MCZ) for the treatment of oral candidiasis were prepared using water-soluble polysaccharides, and the dissolution profiles of MCZ from the FDs were investigated. In addition, the forms were modified by the addition of a surface active agent to accelerate the drug dissolution rate. Circular films incorporating MCZ were obtained using each polysaccharide. Most FDs were easy to handle and resistant to tearing. No diffraction peaks were observed in the X-ray diffractograms of FDs. FDs prepared with sodium alginate or pullulan immediately swelled and disintegrated in aqueous medium, whereas MCZ incorporated in the FD gradually dissolved. A marked acceleration in the MCZ dissolution rate was observed when FD was prepared with polysaccharide containing a surfactant. These results confirmed that modified FDs are useful for treating localized conditions in the oral cavity, such as oral candidiasis, and that FDs can simplify the administration of drugs to patients.展开更多
Creation of an efficient and safe medication is based on the knowledge of the world's best achievements in medicine and pharmacy. Development of new original medications and dosage forms, study of their specific medi...Creation of an efficient and safe medication is based on the knowledge of the world's best achievements in medicine and pharmacy. Development of new original medications and dosage forms, study of their specific medicinal properties, application and advantages over well-known brands are important for achieving a high quality medical assistance. The innovative product----original Ukrainian substance Flurenizide served as the basis for new dosage forms (solid, semisolid and liquid) intended for preventive care and treatment of dangerous and controlled infectious diseases for human and veterinary medicine.展开更多
In this study, a new formulation of silica nanocomposite containing nifedipine (NI) loaded freeze-dried solid-lipid nanoparticles (NI-SLNs) and silica have been developed with improved flowability of powders, which ca...In this study, a new formulation of silica nanocomposite containing nifedipine (NI) loaded freeze-dried solid-lipid nanoparticles (NI-SLNs) and silica have been developed with improved flowability of powders, which can lead to the formulation of a widely acceptable oral dosage form. The stable NI-SLNs were prepared using two phospholipids, hydrogenated soybean phosphatidylcholine and dipalmitoylphosphatidylglycerol mixed with 2.5% w/v trehalose as a cryoprotectant followed by lyophilization. We employed various grades of two types of silica, such as fumed and precipitated. Silica improved the poor flow property of NI-SLNs to good category as per USP-29. In addition, most of the silica nanocomposites showed the satisfactory results in their physicochemical properties such as particle size, polydispersity index, zeta potential, and recovered potency by around 100 nm, 0.3, -50 mV, and 80%, respectively. Furthermore, it was found that NI-SLNs were easily released form nanocomposites within 30 min, therefore, suggesting an improvement of drug dissolutions. Among them, precipitated silica cooperated fairly in improving the powder characteristics as well as the physicochemical, morphological, and pharmaceutical properties.展开更多
We investigated preparation of film dosage form (FD) from natural polysaccharides using the casting method without organic solvents, heating or pH control. Ferulic acid (FA) and catechin were employed as model compoun...We investigated preparation of film dosage form (FD) from natural polysaccharides using the casting method without organic solvents, heating or pH control. Ferulic acid (FA) and catechin were employed as model compounds incorporated in the FD, and the release profile of each compound from the form was investigated in the limited medium. Film formation was affected by the addition of the model compound to the polysaccharide solution. Rigid FD was obtained with 2% low-molecular-weight alginate (L-ALG;thickness, 65 μm), and it hardened after the addition of 0.5% polygalacturonic acid, although the thickness of the film did not change. The FDs immediately released the model compound, and the forms dissolved in phosphate-buffered saline. FD modification did not affect the FA release rate except in the early stage. FD would be a useful dosage form, especially for preventing or treating localized problems in the oral cavity.展开更多
Accurate application of dosage of Chinese herbs based on differentiation of symptoms and signs is an important link for a better therapeutic result with less adverse effects. Some of the experiences are briefly in... Accurate application of dosage of Chinese herbs based on differentiation of symptoms and signs is an important link for a better therapeutic result with less adverse effects. Some of the experiences are briefly introduced in the following aspects. ……展开更多
基金Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET)Agencia Nacional de Promoción de Ciencia y Tecnología (ANPCyT )Universidad Nacional de Rosario (UNR) for financial support
文摘Tioconazole(TCZ), a broad-spectrum antifungal agent, has significant activity against Candida albicans and other Candida species, and therefore, it is indicated for the topical treatment of superficial mycoses.The main goal of this work is to report an exhaustive identification and characterization procedure to improve and facilitate the online quality control and continuous process monitoring of TCZ in bulk material and loaded in two different dosage forms: ovules and nail lacquer. The methodologies were based on thermal(differential scanning calorimetry(DSC), melting point, and thermogravimetry(TG)),spectroscopic(ultraviolet(UV), Raman, near infrared(NIR), infrared spectroscopy coupled to attenuated total reflectance(FTIR-ATR), and nuclear magnetic resonance(NMR)), microscopic and X-ray diffraction(XRD). The TCZ bulk powder showed a high crystallinity, as observed by XRD, with a particles size distribution(3–95 mm) resolved by microscopic measurements. TCZ melting point(82.8 °C) and a degradation peak centered at 297.8 °C were obtained by DSC and DTG, respectively. An unambiguous structure elucidation of TCZ was obtained by mono-and two-dimensional1 H and13 C NMR spectral data analysis. The FTIR-ATR, Raman and NIR spectra of both the raw material and the commercial products were analyzed and their characteristic bands were tabulated. The best methods for TCZ identification in ovules were DSC, TG, XRD, NIR and Raman, while NIR and FTIR-ATR were the most appropriate techniques to analyze it in the nail lacquer. DSC, TG, DRX, Raman, FTIR-ATR and NIR spectroscopy are effective techniques to be used in online process analysis, because they do not require sample preparation, and they are considerably sensitive to analyze complex samples.
文摘Vaginal dosage forms are seen as a viable option for empowering women to protect themselves from the risk of HIV transmission. Because of limited research in the field, there is a lack of suitable dissolution methods established for determination of drug release from vaginal formulations inside the vaginal tract. The main aim of this study was to develop a simple, reliable and reproducible in vitro release method for evaluation of solid vaginal dosage forms (VDFs) which was hoped to exhibit a close in vitro-in vivo correlation. Dapivirine, a drug being developed as a microbicide and a well established marketed anti fungal drug, Clotrimazole were used as model drugs. Two doses (0.5 mg and 1.25 mg) of Dapivirine were prepared as novel rapidly disintegrating, bioadhesive tablets. Clotrimazole 100 mg, prepared in house as conventional release tablets and commercially available Canesten (Clotrimazole tablet 100 mg) were used. The in vitro drug release testing of these tablets was carried out using a designed system which consisted of modified USP dissolution Apparatus II in conjunction with Enhancer cell (as sample holder) in 150 ml capacity flasks instead of the standard 900 ml flasks. The suitability of the system was investigated for variable parameters such as formulation types, drug concentration, stirring speeds, media volume and comparison of in house product with marketed product. The method was successfully optimized at a volume of 100 ml and a low speed of 25 rpm at pH 4 and was found sensitive enough to distinguish between formulations and evaluate products of different strengths. A linear drug release profile (R2 = 0.99) was obtained in case of Dapivirine, indicating that drug release is controlled by diffusion. The developed dissolution system has a potential to exhibit a good in vitro-in vivo correlation in addition to carrying out routine dissolution tests for solid VDFs.
文摘Oral candidiasis is a common disease in patients with dry mouth. In this study, film dosage forms (FD) incorporating miconazole nitrate, an antifungal agent, were prepared with water-soluble polysaccharide and cyclodextrin (CD). The dissolution profiles of the drug from the FDs were investigated in limited dissolution medium. Soft films were obtained from sodium alginate containing 0.5% α-CD, β-CD, or γ-CD. Most FDs were easy to handle, though the film tearing resistance was lower than that of CD-free FDs. Addition of CD to the FD accelerated the drug dissolution rate. Interestingly, this phenomenon was also observed in FDs prepared with pullulan. In contrast, acceleration of the drug dissolution rate was not observed when CD polymer was added to the base solution. The initial drug dissolution rate was controllable by the amount of CD added to the FD. Therefore, FDs prepared with these materials are useful to treat oral candidiasis in patients with dry mouth syndrome.
文摘Film dosage forms (FDs) containing miconazole (MCZ) for the treatment of oral candidiasis were prepared using water-soluble polysaccharides, and the dissolution profiles of MCZ from the FDs were investigated. In addition, the forms were modified by the addition of a surface active agent to accelerate the drug dissolution rate. Circular films incorporating MCZ were obtained using each polysaccharide. Most FDs were easy to handle and resistant to tearing. No diffraction peaks were observed in the X-ray diffractograms of FDs. FDs prepared with sodium alginate or pullulan immediately swelled and disintegrated in aqueous medium, whereas MCZ incorporated in the FD gradually dissolved. A marked acceleration in the MCZ dissolution rate was observed when FD was prepared with polysaccharide containing a surfactant. These results confirmed that modified FDs are useful for treating localized conditions in the oral cavity, such as oral candidiasis, and that FDs can simplify the administration of drugs to patients.
文摘Creation of an efficient and safe medication is based on the knowledge of the world's best achievements in medicine and pharmacy. Development of new original medications and dosage forms, study of their specific medicinal properties, application and advantages over well-known brands are important for achieving a high quality medical assistance. The innovative product----original Ukrainian substance Flurenizide served as the basis for new dosage forms (solid, semisolid and liquid) intended for preventive care and treatment of dangerous and controlled infectious diseases for human and veterinary medicine.
文摘In this study, a new formulation of silica nanocomposite containing nifedipine (NI) loaded freeze-dried solid-lipid nanoparticles (NI-SLNs) and silica have been developed with improved flowability of powders, which can lead to the formulation of a widely acceptable oral dosage form. The stable NI-SLNs were prepared using two phospholipids, hydrogenated soybean phosphatidylcholine and dipalmitoylphosphatidylglycerol mixed with 2.5% w/v trehalose as a cryoprotectant followed by lyophilization. We employed various grades of two types of silica, such as fumed and precipitated. Silica improved the poor flow property of NI-SLNs to good category as per USP-29. In addition, most of the silica nanocomposites showed the satisfactory results in their physicochemical properties such as particle size, polydispersity index, zeta potential, and recovered potency by around 100 nm, 0.3, -50 mV, and 80%, respectively. Furthermore, it was found that NI-SLNs were easily released form nanocomposites within 30 min, therefore, suggesting an improvement of drug dissolutions. Among them, precipitated silica cooperated fairly in improving the powder characteristics as well as the physicochemical, morphological, and pharmaceutical properties.
文摘We investigated preparation of film dosage form (FD) from natural polysaccharides using the casting method without organic solvents, heating or pH control. Ferulic acid (FA) and catechin were employed as model compounds incorporated in the FD, and the release profile of each compound from the form was investigated in the limited medium. Film formation was affected by the addition of the model compound to the polysaccharide solution. Rigid FD was obtained with 2% low-molecular-weight alginate (L-ALG;thickness, 65 μm), and it hardened after the addition of 0.5% polygalacturonic acid, although the thickness of the film did not change. The FDs immediately released the model compound, and the forms dissolved in phosphate-buffered saline. FD modification did not affect the FA release rate except in the early stage. FD would be a useful dosage form, especially for preventing or treating localized problems in the oral cavity.
文摘 Accurate application of dosage of Chinese herbs based on differentiation of symptoms and signs is an important link for a better therapeutic result with less adverse effects. Some of the experiences are briefly introduced in the following aspects. ……