The experimental studies of the flaring gate pier applied on the surface spillway in a high-arch dam show that a shock-wave will appear when the pattern of the flow is kept as super-critical. Meanwhile, the water dept...The experimental studies of the flaring gate pier applied on the surface spillway in a high-arch dam show that a shock-wave will appear when the pattern of the flow is kept as super-critical. Meanwhile, the water depth at the outlet increases significantly, the flow moves downward in different directions, and the plunging jet is in a narrow and long shape, with a full longitudinal diffusion. In addition, the variation of the flaring gate pier design parameters affects little the discharge capacity of the surface spillway, these parameters including the contraction ratio fl, the contraction angle c~ and the spillway chute angle O. The pressure on the bottom of the spillway increases along the way and reaches the maximum before the outlet, and then decreases rapidly. Due to the flow impacting, the pressure on both sidewalls increases abruptly at the turning line of the flaring gate pier. To see the characteristics of the flow in the flaring gate pier, a simple calculation method is suggested based on the conversation of energy and mass, and the calculation methods for the jet trajectory and the horizontal length in air are also proposed. The results are found in good agreement with experimental data.展开更多
The energy dissipation of X-shaped flaring gate piers ahead of a stepped spillway was adopted in the Suofengying Hydroplant. Under the circumstance that the first step is higher than others, at the step surface an aer...The energy dissipation of X-shaped flaring gate piers ahead of a stepped spillway was adopted in the Suofengying Hydroplant. Under the circumstance that the first step is higher than others, at the step surface an aerated cavity occured behind piers. The interaction of the weir head, the elevation difference between crest and chamber outlet, the first step height, the slopes of weir end and step, and the size of cavity, was investigated, the expression was derived to characterize their relationship, and the corresponding curves were plotted. The comparison of the calculated and simulated results with the measured data was performed. When the slopes of step and weir end are equivalent, the relative height difference between the first and second steps becomes the main factor influencing the aerated cavity. These findings may be useful in practical applications.展开更多
A new-style flood discharging dam, which consolidates the flaring gate pier and the stepped spillway for discharging the flood through the dam surface, had been applied in China. The theoretical study on it is in a be...A new-style flood discharging dam, which consolidates the flaring gate pier and the stepped spillway for discharging the flood through the dam surface, had been applied in China. The theoretical study on it is in a beginning stage at present. The three-dimensional numerical simulation has not been reported. In this paper, the 3D numerical calculation on the two-phase flow of water and air with discharge per unit width 195m~ 3 /s· m is presented . The results indicate that there is negative pressure on the juncture of the spillway surface and the first step. There forms obvious longitudinal and transverse eddies on the steps and the velocity decreases obviously compared with the smooth spillway. The figures of the velocity distributions and the water-air two-phase flows are plotted. The results calculated on the pressure are in agreement with the experimental data. Based on the position of the negative pressure obtained from calculation, measurement points of pressure are arranged in physical model. The experimental results validate the existence of the negative pressure. Being an applied and trial study, the results obtained are of theoretical and practical significance.展开更多
基金the National Natural Science Foundation of China (Grant Nos. 50909067, 51009102)the Program for New Century Excellent Talents in University (Grant No. 2011SCU-NCET-10-0589)
文摘The experimental studies of the flaring gate pier applied on the surface spillway in a high-arch dam show that a shock-wave will appear when the pattern of the flow is kept as super-critical. Meanwhile, the water depth at the outlet increases significantly, the flow moves downward in different directions, and the plunging jet is in a narrow and long shape, with a full longitudinal diffusion. In addition, the variation of the flaring gate pier design parameters affects little the discharge capacity of the surface spillway, these parameters including the contraction ratio fl, the contraction angle c~ and the spillway chute angle O. The pressure on the bottom of the spillway increases along the way and reaches the maximum before the outlet, and then decreases rapidly. Due to the flow impacting, the pressure on both sidewalls increases abruptly at the turning line of the flaring gate pier. To see the characteristics of the flow in the flaring gate pier, a simple calculation method is suggested based on the conversation of energy and mass, and the calculation methods for the jet trajectory and the horizontal length in air are also proposed. The results are found in good agreement with experimental data.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50479061).
文摘The energy dissipation of X-shaped flaring gate piers ahead of a stepped spillway was adopted in the Suofengying Hydroplant. Under the circumstance that the first step is higher than others, at the step surface an aerated cavity occured behind piers. The interaction of the weir head, the elevation difference between crest and chamber outlet, the first step height, the slopes of weir end and step, and the size of cavity, was investigated, the expression was derived to characterize their relationship, and the corresponding curves were plotted. The comparison of the calculated and simulated results with the measured data was performed. When the slopes of step and weir end are equivalent, the relative height difference between the first and second steps becomes the main factor influencing the aerated cavity. These findings may be useful in practical applications.
文摘A new-style flood discharging dam, which consolidates the flaring gate pier and the stepped spillway for discharging the flood through the dam surface, had been applied in China. The theoretical study on it is in a beginning stage at present. The three-dimensional numerical simulation has not been reported. In this paper, the 3D numerical calculation on the two-phase flow of water and air with discharge per unit width 195m~ 3 /s· m is presented . The results indicate that there is negative pressure on the juncture of the spillway surface and the first step. There forms obvious longitudinal and transverse eddies on the steps and the velocity decreases obviously compared with the smooth spillway. The figures of the velocity distributions and the water-air two-phase flows are plotted. The results calculated on the pressure are in agreement with the experimental data. Based on the position of the negative pressure obtained from calculation, measurement points of pressure are arranged in physical model. The experimental results validate the existence of the negative pressure. Being an applied and trial study, the results obtained are of theoretical and practical significance.
