The dynamic characteristics of a beam-cable coupled system are investigated using an improved Chebyshev spectral element method in order to observe the effects of adding cables on the beam. The system is modeled as a ...The dynamic characteristics of a beam-cable coupled system are investigated using an improved Chebyshev spectral element method in order to observe the effects of adding cables on the beam. The system is modeled as a double Timoshenko beam system interconnected by discrete springs. Utilizing Chebyshev series expansion and meshing the system according to the locations of its connections, numerical results of the natural frequencies and mode shapes are obtained using only a few elements, and the results are validated by comparing them with the results of a finite-element method. Then the effects of the cable parameters and layout of connections on the natural frequencies and mode shapes of a fixed-pinned beam are studied. The results show that the modes of a beam-cable coupled system can be classified into two types, beam mode and cable mode, according to the dominant deformation. To avoid undesirable vibrations of the cable, its parameters should be controlled in a reasonable range, or the layout of the connections should be optimized.展开更多
针对150 k V/30 k W电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT(Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设...针对150 k V/30 k W电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT(Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150 k V/30 k W高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.展开更多
基金supported by the National Basic Research Program of China (Grant 2013CB733004)
文摘The dynamic characteristics of a beam-cable coupled system are investigated using an improved Chebyshev spectral element method in order to observe the effects of adding cables on the beam. The system is modeled as a double Timoshenko beam system interconnected by discrete springs. Utilizing Chebyshev series expansion and meshing the system according to the locations of its connections, numerical results of the natural frequencies and mode shapes are obtained using only a few elements, and the results are validated by comparing them with the results of a finite-element method. Then the effects of the cable parameters and layout of connections on the natural frequencies and mode shapes of a fixed-pinned beam are studied. The results show that the modes of a beam-cable coupled system can be classified into two types, beam mode and cable mode, according to the dominant deformation. To avoid undesirable vibrations of the cable, its parameters should be controlled in a reasonable range, or the layout of the connections should be optimized.
文摘针对150 k V/30 k W电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT(Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150 k V/30 k W高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.
