BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate eth...BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate ethylene diamine (C2H8N2) was added in order to adjust pH of 7. The ions distribution of citric acid at different pH explains the effect of citric acid in the starting solution. The XRD patterns of the as-burnt powders and annealing powders show different phases for different citric acid content. In addition, the lattice constants (a, c) derived from X-ray diffraction pattern were changed from 0.58881 nm to 0.58997 nm and 2.32057 nm to 2.32296 nm respectively. The data from VSM indicated that the powder with high citric acid content took on good magnetic properties. Pure single BaFe12O19 of the specific maximum magnetization M(1 T)≈ 49.73 Am^2/kg, the specific remanent magnetization Mr ≈ 30.77 Am^2/kg and the coercive force He≈ 467 kA/m was produced when the molar ratios of citric acid to the metal nitrate was 1.5.展开更多
A simple and rapid process for synthesizing lead zirconate titanate,Pb(Zr0.52Ti0.48)O3(PZT),ferroclectric powders was developed.This process,combining the sol-gel and combustion process.offers several advantages o...A simple and rapid process for synthesizing lead zirconate titanate,Pb(Zr0.52Ti0.48)O3(PZT),ferroclectric powders was developed.This process,combining the sol-gel and combustion process.offers several advantages over conventional methods.including rapid solution synthesis,use of commercially available materials lower synthesis temperature and ease of obtaining ultrafine powders.The precursor solution for synthesizing powders was prepared from lead nitrate.zireonium nitrate.titanium oxynitrate,citric acid and deionized water.The precarsor was investigated by DSC-TG,and the PZT powders were investigated by powder-XRD,IR spectra and TEM.XRD analysis shous that the powders possess a single phase perovskite type structure,no pyrochlore phase exists.and TEM image shows that the grain size of the powders is about 40nm.展开更多
Li2Fe0.5Mn0.5SiO4 material was synthesized by a citric acid-assisted sol-gel method. The influence of the stoichiometric ratio value of n(citric acid) to n(Fe2+-Mn2+) on the electrochemical properties of Li2Fe0.5Mn0.5...Li2Fe0.5Mn0.5SiO4 material was synthesized by a citric acid-assisted sol-gel method. The influence of the stoichiometric ratio value of n(citric acid) to n(Fe2+-Mn2+) on the electrochemical properties of Li2Fe0.5Mn0.5SiO4 was studied. The final sample was identified as Li2Fe0.5Mn0.5SiO4 with a Pmn21 monoclinic structure by X-ray diffraction analysis. The crystal phases components and crystal phase structure of the Li2Fe0.5Mn0.4SiO4 material were improved as the increase of the stoichiometric ratio value of n(citric acid) to n(Fe2+-Mn2+). Field-emission scanning electron microscopy verified that the Li2Fe0.5Mn0.5SiO4 particles are agglomerates of Li2Fe0.5Mn0.5SiO4 primary particles with a geometric mean diameter of 220 nm. The Li2Fe0.5Mn0.5SiO4 sample was used as an electrode material for rechargeable lithium ion batteries, and the electrochemical measurements were carried out at room temperature. The Li2Fe0.5Mn0.5SiO4 electrode delivered a first discharge capacity of 230.1 mAh/g at the current density of 10 mA/g in first cycle and about 162 mAh/g after 20 cycles at the current density of 20 mA/g.展开更多
The effect of different annealing temperatures on the structure, morphology,and optical properties of ZnO thin films prepared by the chelating sol-gel method was investigated.Zinc-oxide thin films were coated on quart...The effect of different annealing temperatures on the structure, morphology,and optical properties of ZnO thin films prepared by the chelating sol-gel method was investigated.Zinc-oxide thin films were coated on quartz glass substrates by dip coating. Zinc nitrate, absoluteethanol, and citric acid were used as precursor, solvent, and chelating agent, respectively. Theresults show that ZnO films derived from zinc-citrate have lower crystallization temperature (below400℃), and that the crystal structure is wurtzite. The films, treated over 500℃, consist ofnano-particles and show to be porous at 600℃. The particle size of the film increases with theincrease of the annealing temperature. The largest particle size is 60 nm at 600℃. The opticaltransmittances related to the annealing temperatures become 90% higher in the visible range. Thefilm shows a starting absorption at 380 nm, and the optical band-gap of the thin film (fired at500℃) is 3.25 eV and close to the intrinsic band-gap of ZnO (3.2 eV).展开更多
Ceria-zirconia solid solution has been prepared by the urea grind combustion and citric acid sol-gel methods for catalytic applications as oxygen storage/release materials in this study. The properties and oxygen stor...Ceria-zirconia solid solution has been prepared by the urea grind combustion and citric acid sol-gel methods for catalytic applications as oxygen storage/release materials in this study. The properties and oxygen storage/release capacities of samples with different Zr contents were characterized and evaluated by X-ray diffraction(XRD), Nadsorption, scanning electron microscopy(SEM), Raman spectroscopy, and insitu CO–COlooping test. The results demonstrate that the samples prepared by two methods are all of excellent lattice [O] release/storage properties and maintain good long-term cycle stability. But the preparation method significantly impacts the homogeneity of samples related to their redox properties and the content of Zr over 20%, which greatly changed the properties of ceria-zirconia solid solutions and caused their changing of crystalline symmetry from cubic to tetragonal. The samples prepared by citric acid solgel method are of more homogeneous particle sizes and higher specific surface areas than that by urea grind combustion method, which is benefit to the oxygen release rather than oxygen storage. The bulk oxygen amount migrated to surface increases with the increasing Zr content, however, the amount of lattice oxygen migration decreases when Zr content is over 20%. When Zr content is 20%, the differences of storage/release capacities from two different preparation methods are reduced at high temperature in the long-term loop reaction.展开更多
Gadolinium zirconate(Gd2Zr2O7) nanocrystals were prepared via two different combustion methods: citric acid combustion(CAC) and stearic acid combustion(SAC). The effects of the different preparation methods on ...Gadolinium zirconate(Gd2Zr2O7) nanocrystals were prepared via two different combustion methods: citric acid combustion(CAC) and stearic acid combustion(SAC). The effects of the different preparation methods on the phase composition, microtopography, and sintering densification of the resulting Gd2Zr2O7 nanopowders were investigated by thermal-gravimetric and differential thermal analysis(TG-DTA), Fourier transform infrared spectroscopy(FTIR), X-ray diffraction(XRD), and transmission electron microscopy(TEM) techniques. The results indicated that both methods could produce Gd2Zr2O7 nanopowders with an excellent defective fluorite structure. The reaction time was reduced by the SAC method, compared with the CAC method. The nanopowders synthesized by the two methods were different in grain size distribution. The resulting nanoparticle diameter was about 50 nm for CAC and 10 nm for SAC. After vacuum sintering, the sintered bodies also had a different relative density of about 93% and 98%, respectively. Thus the preparation of Gd2Zr2O7 nanopowders by SAC was the first choice to achieve the desired sintering densification.展开更多
s: Ultrafine A2La2Ti3O10 (A=K, Na) powders with laminar structure were successfully synthesized by citric acid sol-gel method using ANO3(A=K, Na)?La(NO3)3?Ti(OBu)4 and citric acid as starting precursors. The crystalli...s: Ultrafine A2La2Ti3O10 (A=K, Na) powders with laminar structure were successfully synthesized by citric acid sol-gel method using ANO3(A=K, Na)?La(NO3)3?Ti(OBu)4 and citric acid as starting precursors. The crystalline phase of A2La2Ti3O10 can be obtained by thermal decomposition of citrate complex precursors at a relatively low temperature of 800 ℃ (600 ℃ for A=Na), about 300 ℃(500 ℃ for A=Na) lower than that of conventional solid state reaction process. The properties of the citrate precursors and the calcined powders were characterized by Infrared spectroscopy (IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal-gravimetric-differential thermal analysis (TG-DTA), inductively coupled plasma (ICP) and Brunauer-Emmett-Teller (BET) techniques. Results show that the average size of A2La2Ti3O10 powders obtained by citric acid sol-gel route was reduced to 200 nm×250 nm and the specific surface area was up to 19 m2·g-1. At the same time, the product was with more regular morphological characteristics. The synthesis process and the formation of A2La2Ti3O10 were also discussed. The obtained A2La2Ti3O10 was found to be transformed from A2La2Ti3O9.5 during the formation process.展开更多
LiCoO2 precursors of the cathode material for lithium ion batteries were prepared from lithium hydroxide, basic cobalt carbonate and citric acid by a sol gel method. The LiCoO2 samples were obtained by sintering the g...LiCoO2 precursors of the cathode material for lithium ion batteries were prepared from lithium hydroxide, basic cobalt carbonate and citric acid by a sol gel method. The LiCoO2 samples were obtained by sintering the gel precursors at different temperatures and for different times. The thermal decomposition behavior of the gel precursors was examined by means of thermo gravimetric analysis and differential thermal analysis using a PCT IA thermal analyzer system. Their structures and morphologies were characterized by powder XRD and SEM techniques. It was found that using citric acid realized that the formation of LiCoO2 crystal can be clearly differentiated to the nucleation and growth processes of the crystals; furthermore, the crystal size can be controlled. Electrochemical tests using the LAND BT1 10 test system showed the electrochemical performance of the material is affected by its integrity and stability.展开更多
用柠檬酸溶胶-凝胶燃烧法制备了锂离子电池正极材料L iN i0.5Co0.5O2,并对材料进行了热分析、红外分析及X射线衍射分析。研究结果表明,L iN i0.5Co0.5O2干凝胶在空气中自蔓延燃烧,燃烧产物再于800℃烧结10 h,可避免因缺氧而导致杂相L i2...用柠檬酸溶胶-凝胶燃烧法制备了锂离子电池正极材料L iN i0.5Co0.5O2,并对材料进行了热分析、红外分析及X射线衍射分析。研究结果表明,L iN i0.5Co0.5O2干凝胶在空气中自蔓延燃烧,燃烧产物再于800℃烧结10 h,可避免因缺氧而导致杂相L i2CO3、L i2N i8O10的产生,产物晶型完整。展开更多
基金Project supported by the Shanghai Nano-Technology Promotion Center and Science and Technology of Shanghai Municipality (Grant No.O452nm049)
文摘BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate ethylene diamine (C2H8N2) was added in order to adjust pH of 7. The ions distribution of citric acid at different pH explains the effect of citric acid in the starting solution. The XRD patterns of the as-burnt powders and annealing powders show different phases for different citric acid content. In addition, the lattice constants (a, c) derived from X-ray diffraction pattern were changed from 0.58881 nm to 0.58997 nm and 2.32057 nm to 2.32296 nm respectively. The data from VSM indicated that the powder with high citric acid content took on good magnetic properties. Pure single BaFe12O19 of the specific maximum magnetization M(1 T)≈ 49.73 Am^2/kg, the specific remanent magnetization Mr ≈ 30.77 Am^2/kg and the coercive force He≈ 467 kA/m was produced when the molar ratios of citric acid to the metal nitrate was 1.5.
文摘A simple and rapid process for synthesizing lead zirconate titanate,Pb(Zr0.52Ti0.48)O3(PZT),ferroclectric powders was developed.This process,combining the sol-gel and combustion process.offers several advantages over conventional methods.including rapid solution synthesis,use of commercially available materials lower synthesis temperature and ease of obtaining ultrafine powders.The precursor solution for synthesizing powders was prepared from lead nitrate.zireonium nitrate.titanium oxynitrate,citric acid and deionized water.The precarsor was investigated by DSC-TG,and the PZT powders were investigated by powder-XRD,IR spectra and TEM.XRD analysis shous that the powders possess a single phase perovskite type structure,no pyrochlore phase exists.and TEM image shows that the grain size of the powders is about 40nm.
基金Projects(13A047,10B054)supported by the Scientific Research Fund of Hunan Provincial Education Department,ChinaProjects(2011GK2002,2011FJ3160)supported by the Planned Science and Technology Project of Hunan Province,China
文摘Li2Fe0.5Mn0.5SiO4 material was synthesized by a citric acid-assisted sol-gel method. The influence of the stoichiometric ratio value of n(citric acid) to n(Fe2+-Mn2+) on the electrochemical properties of Li2Fe0.5Mn0.5SiO4 was studied. The final sample was identified as Li2Fe0.5Mn0.5SiO4 with a Pmn21 monoclinic structure by X-ray diffraction analysis. The crystal phases components and crystal phase structure of the Li2Fe0.5Mn0.4SiO4 material were improved as the increase of the stoichiometric ratio value of n(citric acid) to n(Fe2+-Mn2+). Field-emission scanning electron microscopy verified that the Li2Fe0.5Mn0.5SiO4 particles are agglomerates of Li2Fe0.5Mn0.5SiO4 primary particles with a geometric mean diameter of 220 nm. The Li2Fe0.5Mn0.5SiO4 sample was used as an electrode material for rechargeable lithium ion batteries, and the electrochemical measurements were carried out at room temperature. The Li2Fe0.5Mn0.5SiO4 electrode delivered a first discharge capacity of 230.1 mAh/g at the current density of 10 mA/g in first cycle and about 162 mAh/g after 20 cycles at the current density of 20 mA/g.
基金This work was financially supported by the Natural Science Foundation of Tianjin (No. 33802311)
文摘The effect of different annealing temperatures on the structure, morphology,and optical properties of ZnO thin films prepared by the chelating sol-gel method was investigated.Zinc-oxide thin films were coated on quartz glass substrates by dip coating. Zinc nitrate, absoluteethanol, and citric acid were used as precursor, solvent, and chelating agent, respectively. Theresults show that ZnO films derived from zinc-citrate have lower crystallization temperature (below400℃), and that the crystal structure is wurtzite. The films, treated over 500℃, consist ofnano-particles and show to be porous at 600℃. The particle size of the film increases with theincrease of the annealing temperature. The largest particle size is 60 nm at 600℃. The opticaltransmittances related to the annealing temperatures become 90% higher in the visible range. Thefilm shows a starting absorption at 380 nm, and the optical band-gap of the thin film (fired at500℃) is 3.25 eV and close to the intrinsic band-gap of ZnO (3.2 eV).
基金the financial supports of National Natural Science Foundation of China(21406152)Research Project Supported by Shanxi Scholarship Council of China(2014-028)Shanxi Coal Based Key Scientific and Technological Project(MJH2014-02,MJH2015-04)
文摘Ceria-zirconia solid solution has been prepared by the urea grind combustion and citric acid sol-gel methods for catalytic applications as oxygen storage/release materials in this study. The properties and oxygen storage/release capacities of samples with different Zr contents were characterized and evaluated by X-ray diffraction(XRD), Nadsorption, scanning electron microscopy(SEM), Raman spectroscopy, and insitu CO–COlooping test. The results demonstrate that the samples prepared by two methods are all of excellent lattice [O] release/storage properties and maintain good long-term cycle stability. But the preparation method significantly impacts the homogeneity of samples related to their redox properties and the content of Zr over 20%, which greatly changed the properties of ceria-zirconia solid solutions and caused their changing of crystalline symmetry from cubic to tetragonal. The samples prepared by citric acid solgel method are of more homogeneous particle sizes and higher specific surface areas than that by urea grind combustion method, which is benefit to the oxygen release rather than oxygen storage. The bulk oxygen amount migrated to surface increases with the increasing Zr content, however, the amount of lattice oxygen migration decreases when Zr content is over 20%. When Zr content is 20%, the differences of storage/release capacities from two different preparation methods are reduced at high temperature in the long-term loop reaction.
文摘Gadolinium zirconate(Gd2Zr2O7) nanocrystals were prepared via two different combustion methods: citric acid combustion(CAC) and stearic acid combustion(SAC). The effects of the different preparation methods on the phase composition, microtopography, and sintering densification of the resulting Gd2Zr2O7 nanopowders were investigated by thermal-gravimetric and differential thermal analysis(TG-DTA), Fourier transform infrared spectroscopy(FTIR), X-ray diffraction(XRD), and transmission electron microscopy(TEM) techniques. The results indicated that both methods could produce Gd2Zr2O7 nanopowders with an excellent defective fluorite structure. The reaction time was reduced by the SAC method, compared with the CAC method. The nanopowders synthesized by the two methods were different in grain size distribution. The resulting nanoparticle diameter was about 50 nm for CAC and 10 nm for SAC. After vacuum sintering, the sintered bodies also had a different relative density of about 93% and 98%, respectively. Thus the preparation of Gd2Zr2O7 nanopowders by SAC was the first choice to achieve the desired sintering densification.
文摘s: Ultrafine A2La2Ti3O10 (A=K, Na) powders with laminar structure were successfully synthesized by citric acid sol-gel method using ANO3(A=K, Na)?La(NO3)3?Ti(OBu)4 and citric acid as starting precursors. The crystalline phase of A2La2Ti3O10 can be obtained by thermal decomposition of citrate complex precursors at a relatively low temperature of 800 ℃ (600 ℃ for A=Na), about 300 ℃(500 ℃ for A=Na) lower than that of conventional solid state reaction process. The properties of the citrate precursors and the calcined powders were characterized by Infrared spectroscopy (IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal-gravimetric-differential thermal analysis (TG-DTA), inductively coupled plasma (ICP) and Brunauer-Emmett-Teller (BET) techniques. Results show that the average size of A2La2Ti3O10 powders obtained by citric acid sol-gel route was reduced to 200 nm×250 nm and the specific surface area was up to 19 m2·g-1. At the same time, the product was with more regular morphological characteristics. The synthesis process and the formation of A2La2Ti3O10 were also discussed. The obtained A2La2Ti3O10 was found to be transformed from A2La2Ti3O9.5 during the formation process.
文摘LiCoO2 precursors of the cathode material for lithium ion batteries were prepared from lithium hydroxide, basic cobalt carbonate and citric acid by a sol gel method. The LiCoO2 samples were obtained by sintering the gel precursors at different temperatures and for different times. The thermal decomposition behavior of the gel precursors was examined by means of thermo gravimetric analysis and differential thermal analysis using a PCT IA thermal analyzer system. Their structures and morphologies were characterized by powder XRD and SEM techniques. It was found that using citric acid realized that the formation of LiCoO2 crystal can be clearly differentiated to the nucleation and growth processes of the crystals; furthermore, the crystal size can be controlled. Electrochemical tests using the LAND BT1 10 test system showed the electrochemical performance of the material is affected by its integrity and stability.
文摘用柠檬酸溶胶-凝胶燃烧法制备了锂离子电池正极材料L iN i0.5Co0.5O2,并对材料进行了热分析、红外分析及X射线衍射分析。研究结果表明,L iN i0.5Co0.5O2干凝胶在空气中自蔓延燃烧,燃烧产物再于800℃烧结10 h,可避免因缺氧而导致杂相L i2CO3、L i2N i8O10的产生,产物晶型完整。