Natural rubber (NR) is widely used in various fields including aerospace, military industry and transportation due to its superior elasticity and comprehensive mechanical properties. Nonetheless, the commercial NR pre...Natural rubber (NR) is widely used in various fields including aerospace, military industry and transportation due to its superior elasticity and comprehensive mechanical properties. Nonetheless, the commercial NR prepared by different methods usually exhibits different mechanical properties, primarily due to variations in processing conditions during the conversion from latex to bulk rubber material. Consequently, this poses challenges in scientific research and industrial production of NR. In order to assess the properties of various commercially available NR and identify key structural and compositional components, this study systematically compares and analyzes four representative NR raw materials: air dried sheet (ADS), ribbed smoked sheets (RSS), constant viscidity NR (CV), and whole field latex rubber (WF). The investigation focuses on evaluating their static mechanical behavior, SIC behavior, wear resistance, and fatigue resistance. The findings indicate that protein and gel content exhibit a crucial influence on the NR properties. These constituents contribute to the formation of a high-crosslinking density region, generating a heterogeneous network structure within the rubber. This structure amplifies strains during deformation, leading to earlier and stronger strain-induced crystallization (SIC). Among the four commercial NR brands, RSS demonstrates superior overall mechanical and dynamic properties owing to its high protein and gel content. This study serves as a valuable reference for comprehending the differences in properties among various commercial NR, thereby offering guidance for the actual processing and selection of NR.展开更多
BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate eth...BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate ethylene diamine （C2H8N2） was added in order to adjust pH of 7. The ions distribution of citric acid at different pH explains the effect of citric acid in the starting solution. The XRD patterns of the as-burnt powders and annealing powders show different phases for different citric acid content. In addition, the lattice constants （a, c） derived from X-ray diffraction pattern were changed from 0.58881 nm to 0.58997 nm and 2.32057 nm to 2.32296 nm respectively. The data from VSM indicated that the powder with high citric acid content took on good magnetic properties. Pure single BaFe12O19 of the specific maximum magnetization M（1 T）≈ 49.73 Am^2/kg, the specific remanent magnetization Mr ≈ 30.77 Am^2/kg and the coercive force He≈ 467 kA/m was produced when the molar ratios of citric acid to the metal nitrate was 1.5.展开更多
Magnetic properties of diluted magnetic semiconductors (DMSs), Ni-doped ZnO materials, prepared by sol-gel method were investigated by measuring magnetization as functions of magnetic field. The Ni content affects the...Magnetic properties of diluted magnetic semiconductors (DMSs), Ni-doped ZnO materials, prepared by sol-gel method were investigated by measuring magnetization as functions of magnetic field. The Ni content affects the magnetic properties at low sintered temperature but it has few effects on the magnetic properties at high sintered temperature. The sintered temperature has great effects on the magnetic properties of Ni/ZnO at high original mole ratio of Ni/Zn while it has slight effects on the magnetic properties of Ni/ZnO at low original mole ratio of Ni/Zn whatever low or high sintered temperature.展开更多
基金supported by Research and Development Program in key area of Guangdong Province(No.2020B020217001)the National Natural Science Foundation of China(No.52173058)National Key R&D Program of China(No.2022YFD2301202).
文摘Natural rubber (NR) is widely used in various fields including aerospace, military industry and transportation due to its superior elasticity and comprehensive mechanical properties. Nonetheless, the commercial NR prepared by different methods usually exhibits different mechanical properties, primarily due to variations in processing conditions during the conversion from latex to bulk rubber material. Consequently, this poses challenges in scientific research and industrial production of NR. In order to assess the properties of various commercially available NR and identify key structural and compositional components, this study systematically compares and analyzes four representative NR raw materials: air dried sheet (ADS), ribbed smoked sheets (RSS), constant viscidity NR (CV), and whole field latex rubber (WF). The investigation focuses on evaluating their static mechanical behavior, SIC behavior, wear resistance, and fatigue resistance. The findings indicate that protein and gel content exhibit a crucial influence on the NR properties. These constituents contribute to the formation of a high-crosslinking density region, generating a heterogeneous network structure within the rubber. This structure amplifies strains during deformation, leading to earlier and stronger strain-induced crystallization (SIC). Among the four commercial NR brands, RSS demonstrates superior overall mechanical and dynamic properties owing to its high protein and gel content. This study serves as a valuable reference for comprehending the differences in properties among various commercial NR, thereby offering guidance for the actual processing and selection of NR.
基金Project supported by the Shanghai Nano-Technology Promotion Center and Science and Technology of Shanghai Municipality (Grant No.O452nm049)
文摘BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate ethylene diamine （C2H8N2） was added in order to adjust pH of 7. The ions distribution of citric acid at different pH explains the effect of citric acid in the starting solution. The XRD patterns of the as-burnt powders and annealing powders show different phases for different citric acid content. In addition, the lattice constants （a, c） derived from X-ray diffraction pattern were changed from 0.58881 nm to 0.58997 nm and 2.32057 nm to 2.32296 nm respectively. The data from VSM indicated that the powder with high citric acid content took on good magnetic properties. Pure single BaFe12O19 of the specific maximum magnetization M（1 T）≈ 49.73 Am^2/kg, the specific remanent magnetization Mr ≈ 30.77 Am^2/kg and the coercive force He≈ 467 kA/m was produced when the molar ratios of citric acid to the metal nitrate was 1.5.
基金This work was financially supported by Korea Research Foundation of the Korea Government(MOEHRD)(KRF-2005-210-C00024).
文摘Magnetic properties of diluted magnetic semiconductors (DMSs), Ni-doped ZnO materials, prepared by sol-gel method were investigated by measuring magnetization as functions of magnetic field. The Ni content affects the magnetic properties at low sintered temperature but it has few effects on the magnetic properties at high sintered temperature. The sintered temperature has great effects on the magnetic properties of Ni/ZnO at high original mole ratio of Ni/Zn while it has slight effects on the magnetic properties of Ni/ZnO at low original mole ratio of Ni/Zn whatever low or high sintered temperature.
