Tempospacial energy-saving effect-based diagnosis in large coal-fired power units:Energy-saving benchmark state

The energy-saving analytics of coal-fired power units in China is confronting new challenges especially with even more complicated system structure, higher working medium parameters, time-dependent varying operation conditions and boundaries such as load rate, coal quality, ambient temperature and humidity. Compared with the traditional optimization of specific operating parameters, the idea of the energy-consumption benchmark state was proposed. The equivalent specific fuel consumption(ESFC) analytics was introduced to determine the energy-consumption benchmark state, with the minimum ESFC under varying operation boundaries. Models for the energy-consumption benchmark state were established, and the endogenous additional specific consumption(ASFC) and exogenous ASFC were calculated. By comparing the benchmark state with the actual state, the energy-saving tempospacial effect can be quantified. As a case study, the energy consumption model of a 1000 MW ultra supercritical power unit was built. The results show that system energy consumption can be mainly reduced by improving the performance of turbine subsystem. This nearly doubles the resultant by improving the boiler system. The energy saving effect of each component increases with the decrease of load and has a greater influence under a lower load rate. The heat and mass transfer process takes priority in energy saving diagnosis of related components and processes. This makes great reference for the design and operation optimization of coal-fired power units.

A review of stabilization methods for DCMG with CPL,the role of bandwidth limits and droop control

DC microgrids(DCMGs)integrate and coordinate various DC distribution generation units including various renew-able energy sources and battery storage systems,and have been used in satellites,the International Space Station,telecom power stations,computer power supplies,electric aircraft,and electric ships.However,the presence of constant power loads(CPLs)can cause instability in DCMGs.Thus,this paper reviews the stabilization techniques that can resolve instability caused by CPLs,as well as various parameters of CPLs,such as bandwidth,and the frequency of the CPLs that can stabilize the DCMGs.It also discusses recent trends and future work in finding stability limits using the parameters of CPLs.It should be useful for directing research towards appropriate mathematical and experimental approaches for the stability of DCMGs with CPLs.

Identification of sweet spots in shale-type and siltstone-type“shale oil systems”:A case study of the Chang 7 Member in Ordos Basin

Mid-high maturity shale oil is the most realistic field for the scale breakthrough of terrestrial shale oil production in China.Generally,three deficiencies hinder shale oil development in China:heavy oil density,small sweet spot areas,and poor distribution continuity.Thus,identifying the“sweet spots”in shale oil reservoirs is critical for the efficient exploration and development of terrestrial shale oil.This study targets the siltstone type(Class-Ⅱshale oil)and pure shale type(Class-Ⅲshale oil)of the Chang 7 Member in the Ordos Basin,and identifies three stratigraphic units,namely the hydrocarbon accumulation unit,hydrocarbon generation unit,and hydrocarbon retention unit,which together constitute the in-source“shale oil system”.The hydrocarbon accumulation unit is mainly siltstone,where the hydrocarbons are migrated from shales.It has favorable porethroat network connectivity with a pore connectivity ratio of 32–57%,being the siltstone-type sweet spots.The hydrocarbon generation unit is mainly composed of high-TOC mudstone/shale and is the main contributor to in-source hydrocarbon generation and expulsion.This unit has high three-dimensional connectivity(28–30%),as shown by the pore-throat network model,associated with vertical paths for hydrocarbon expulsion.The hydrocarbon retention unit is mainly composed of low-TOC mudstone/shale retaining self-generated and migrated hydrocarbons.The pore connectivity rate is 17–42%,and the pore-throat network connectivity direction is uneven.Light and low-carbon-number hydrocarbons are preferentially trapped or even sealed in small pores of the retention unit,forming the typical mudstone/shale-type sweet spots.In the process called shale oil intrasource migration,the oil migrates in source rocks causing component fractionation,which allows more shale oil to enrich in the hydrocarbon accumulation and retention units to form sweet spots,compared with the hydrocarbon generation unit.The migration paths include the one from mudstone/shale to siltstone interlayers and that from the high-TOC mudstone/shale intervals to the low-TOC intervals.The in-source accumulation of shale oil shows the differentiated enrichment model featuring“high-TOC mudstone/shale generating hydrocarbons,low-TOC mudstone/shale retaining hydrocarbons,siltstone accumulating hydrocarbons and multiple intra-source migration paths”.In the Ordos Basin,the organic-lean(TOC 1–3%)mudstone/shale intervals appear to be the sweet spots of shale oil,where there are abundant medium-short-chain hydrocarbons retained with high flowability.After fracturing stimulation,their production conditions may be even superior to those of siltstones.This proposed idea changes the previous strategy to look for sweet spots in high-TOC intervals derived from the shale gas industry.