The Development of Highly Loaded Turbine Rotating Blades by Using 3D Optimization Design Method of Turbomachinery Blades Based on Artificial Neural Network & Genetic Algorithm

In order to improve turbine internal efficiency and lower manufacturing cost, a new highly loaded rotating blade has been developed. The 3D optimization design method based on artificial neural network and genetic algorithm is adopted to construct the blade shape. The blade is stacked by the center of gravity in radial direction with five sections. For each blade section, independent suction and pressure sides are constructed from the camber line using Bezier curves. Three-dimensional flow analysis is carried out to verify the performance of the new blade. It is found that the new blade has improved the blade performance by 0.5%. Consequently, it is verified that the new blade is effective to improve the turbine internal efficiency and to lower the turbine weight and manufacturing cost by reducing the blade number by about 15%.

An Adaptive Genetic Algorithm-Based Load Balancing-Aware Task Scheduling Technique for Cloud Computing

Task scheduling in highly elastic and dynamic processing environments such as cloud computing have become the most discussed problem among researchers.Task scheduling algorithms are responsible for the allocation of the tasks among the computing resources for their execution,and an inefficient task scheduling algorithm results in under-or over-utilization of the resources,which in turn leads to degradation of the services.Therefore,in the proposed work,load balancing is considered as an important criterion for task scheduling in a cloud computing environment as it can help in reducing the overhead in the critical decision-oriented process.In this paper,we propose an adaptive genetic algorithm-based load balancing(GALB)-aware task scheduling technique that not only results in better utilization of resources but also helps in optimizing the values of key performance indicators such as makespan,performance improvement ratio,and degree of imbalance.The concept of adaptive crossover and mutation is used in this work which results in better adaptation for the fittest individual of the current generation and prevents them from the elimination.CloudSim simulator has been used to carry out the simulations and obtained results establish that the proposed GALB algorithm performs better for all the key indicators and outperforms its peers which are taken into the consideration.

Comparison between dynamic programming and genetic algorithm for hydro unit economic load dispatch

The hydro unit economic load dispatch （ELD） is of great importance in energy conservation and emission reduction. Dynamic programming （DP） and genetic algorithm （GA） are two representative algorithms for solving ELD problems. The goal of this study was to examine the performance of DP and GA while they were applied to ELD. We established numerical experiments to conduct performance comparisons between DP and GA with two given schemes. The schemes included comparing the CPU time of the algorithms when they had the same solution quality, and comparing the solution quality when they had the same CPU time. The numerical experiments were applied to the Three Gorges Reservoir in China, which is equipped with 26 hydro generation units. We found the relation between the performance of algorithms and the number of units through experiments. Results show that GA is adept at searching for optimal solutions in low-dimensional cases. In some cases, such as with a number of units of less than 10, GA＇s performance is superior to that of a coarse-grid DP. However, GA loses its superiority in high-dimensional cases. DP is powerful in obtaining stable and high-quality solutions. Its performance can be maintained even while searching over a large solution space. Nevertheless, due to its exhaustive enumerating nature, it costs excess time in low-dimensional cases.

Optimal Design of Broadband Loaded Wire Antennas Based on Genetic Algorithm

This paper, using the frequency bandwidth, where both the gain and the VSWR (Voltage Standing Wave Ratio) of a monopole can satisfy the design requirement, as object function, mainly describes the process, in which the load locations, the matching network topology and their component values are optimized by the AGA (Adaptive Genetic Algorithm), to achieve a gain more than -2 dB in horizontal direction and a VSWR less than 3 in bandwidth as wide as possible. Moreover the design results are presented for monopoles with two concentrated loadings. It shows that the AGA is an effective method for designing wideband antennas.

Adaptive impedance matching using quantum genetic algorithm

An adaptive technique adopting quantum genetic algorithm （QGA） for antenna impedance tuning is presented. Three examples are given with different types of antenna impedance. The frequency range of the dual standards is from 1.7 to 2.2 GHz. Simulation results show that the proposed tuning technique can achieve good accuracy of impedance matching and load power. The reflection coefficient and VSWR obtained are also very close to their ideal values. Comparison of the proposed QGA tuning method with conventional genetic algorithm based tuning method is Moreover, the proposed method can be useful for software wireless bands. also given, which shows that the QGA tuning algorithm is much faster. defined radio systems using a single antenna for multiple mobile and

Family genetic algorithms based on gene exchange and its application

Genetic Algorithms （GA） are a search techniques based on mechanics of nature selection and have already been successfully applied in many diverse areas. However, increasing samples show that GA＇s performance is not as good as it was expected to be. Criticism of this algorithm includes the slow speed and premature result during convergence procedure. In order to improve the performance, the population size and individuals＇ space is emphatically described. The influence of individuals＇ space and population size on the operators is analyzed. And a novel family genetic algorithm （FGA） is put forward based on this analysis. In this novel algorithm, the optimum solution families closed to quality individuals is constructed, which is exchanged found by a search in the world space. Search will be done in this microspace. The family that can search better genes in a limited period of time would win a new life. At the same time, the best gene of this micro space with the basic population in the world space is exchanged. Finally, the FGA is applied to the function optimization and image matching through several experiments. The results show that the FGA possessed high performance.

Adaptive template filter method for image processing based on immune genetic algorithm

To preserve the original signal as much as possible and filter random noises as many as possible in image processing,a threshold optimization-based adaptive template filtering algorithm was proposed.Unlike conventional filters whose template shapes and coefficients were fixed,multi-templates were defined and the right template for each pixel could be matched adaptively based on local image characteristics in the proposed method.The superiority of this method was verified by former results concerning the matching experiment of actual image with the comparison of conventional filtering methods.The adaptive search ability of immune genetic algorithm with the elitist selection and elitist crossover(IGAE) was used to optimize threshold t of the transformation function,and then combined with wavelet transformation to estimate noise variance.Multi-experiments were performed to test the validity of IGAE.The results show that the filtered result of t obtained by IGAE is superior to that of t obtained by other methods,IGAE has a faster convergence speed and a higher computational efficiency compared with the canonical genetic algorithm with the elitism and the immune algorithm with the information entropy and elitism by multi-experiments.

Genetic algorithm for multi-protocol label switching

A new method for multi-protocol label switching is presented in this study, whose core idea is to construct model for simulating process of accommodating network online loads and then adopt genetic algorithm to optimize the model. Due to the heuristic property of evolutional method, the new method is efficient and effective, which is verified by the experiments.

A Four-color Matching Method Combining Neural Networks with Genetic Algorithm

A brief review of color matching technology and its application of printing RGB images by CMY or CMYK ink jet printers is presented, followed by an explanation to the conventional approaches that are commonly used in color matching. Then, a four color matching method combining neural network with genetic algorithm is proposed. The initial weights and thresholds of the BP neural network for RGB to CMY color conversion are optimized by the new genetic algorithm based on evolutionarily stable strategy. The fourth component K is generated by using GCR (Gray Component Replacement) concept. Simulation experiments show that it is well behaved in both accuracy and generalization performance.

Distributed Generators Location and Capacity Effect on Voltage Profile Improvement and Power Losses Reduction Using Genetic Algorithm

This paper presents a powerful approach to find the optimal size and location of distributed generation units in a distribution system using GA （Genetic Optimization algorithm）. It is proved that GA method is fast and easy tool to enable the planners to select accurate and the optimum size of generators to improve the system voltage profile in addition to reduce the active and reactive power loss. GA fitness function is introduced including the active power losses, reactive power losses and the cumulative voltage deviation variables with selecting weight of each variable. GA fitness function is subjected to voltage constraints, active and reactive power losses constraints and DG size constraint.

Medical Image Segmentation of Improved Genetic Algorithm Research Based on Dictionary Learning

The image signal is represented by using the atomic of image signal to train an over complete dictionary and is described as sparse linear combinations of these atoms. Recently, the dictionary algorithm for image signal tracking and decomposition is mainly adopted as the focus of research. An alternate iterative algorithm of sparse encoding, sample dictionary and dictionary based on atomic update process is K-SVD decomposition. A new segmentation algorithm of brain MRI image, which uses the noise reduction method with adaptive dictionary based on genetic algorithm, is presented in this paper, and the experimental results show that the algorithm in brain MRI image segmentation has fast calculation speed and the advantage of accurate segmentation. In a very complicated situation, the results show that the segmentation of brain MRI images can be accomplished successfully by using this algorithm, and it achieves the ideal effect and has good accuracy.

Evaluating the Subgrade Reaction Modulus Variations with Soil Grains Shape in Coarse-Grained Soils Using Genetic Algorithm

Subgrade reaction modulus (Ks) is one of the main factors in evaluating engineering properties of soils for structural calculations and operations. So, many studies have been performed on the effect of other soil geotechnical parameters on it. One is the effect of soil grains shape on engineering properties of soils, especially Ks. The aim of the present research is to evaluate the effect of soil grains shape on Ks for coarse-grained soils of the west of Mashhad, Iran. For this purpose, 20 PLTs were performed on coarse-grained soils of the west of Mashhad and Ks amounts were determined. Then, flakiness and elongation of the samples measured and changes of Ks by soil grain shape were evaluated. The results showed the strength dependency of Ks to grain forms which an increase in flakiness and elongation indices leads to a decrease in Ks. Therefore, it is necessary to reduce Ks estimated form empirical relationships for flaky and elongated soils. So, by writing a genetic algorithm-based program to find the optimal relationship between the grain shape and the subgrade reaction coefficient, a valid equation for correcting the results from previous empirical equations was presented.

Evaluation of a novel Asymmetric Genetic Algorithm to optimize the structural design of 3D regular and irregular steel frames

We propose a new algorithm,named Asymmetric Genetic Algorithm(AGA),for solving optimization problems of steel frames.The AGA consists of a developed penalty function,which helps to find the best generation of the population.The objective function is to minimize the weight of the whole steel structure under the constraint of ultimate loads defined for structural steel buildings by the American Institute of Steel Construction(AISC).Design variables are the cross-sectional areas of elements(beams and columns)that are selected from the sets of side-flange shape steel sections provided by the AISC.The finite element method(FEM)is utilized for analyzing the behavior of steel frames.A 15-storey three-bay steel planar frame is optimized by AGA in this study,which was previously optimized by algorithms such as Particle Swarm Optimization(PSO),Particle Swarm Optimizer with Passive Congregation(PSOPC),Particle Swarm Ant Colony Optimization(HPSACO),Imperialist Competitive Algorithm(ICA),and Charged System Search(CSS).The results of AGA such as total weight of the structure and number of analyses are compared with the results of these algorithms.AGA performs better in comparison to these algorithms with respect to total weight and number of analyses.In addition,five numerical examples are optimized by AGA,Genetic Algorithm(GA),and optimization modules of SAP2000,and the results of them are compared.The results show that AGA can decrease the time of analyses,the number of analyses,and the total weight of the structure.AGA decreases the total weight of regular and irregular steel frame about 11.1%and 26.4%in comparing with the optimized results of SAP2000,respectively.

Fuzzy Fruit Fly Optimized Node Quality-Based Clustering Algorithm for Network Load Balancing

Recently,the fundamental problem with Hybrid Mobile Ad-hoc Net-works(H-MANETs)is tofind a suitable and secure way of balancing the load through Internet gateways.Moreover,the selection of the gateway and overload of the network results in packet loss and Delay(DL).For optimal performance,it is important to load balance between different gateways.As a result,a stable load balancing procedure is implemented,which selects gateways based on Fuzzy Logic(FL)and increases the efficiency of the network.In this case,since gate-ways are selected based on the number of nodes,the Energy Consumption(EC)was high.This paper presents a novel Node Quality-based Clustering Algo-rithm(NQCA)based on Fuzzy-Genetic for Cluster Head and Gateway Selection(FGCHGS).This algorithm combines NQCA with the Improved Weighted Clus-tering Algorithm(IWCA).The NQCA algorithm divides the network into clusters based upon node priority,transmission range,and neighbourfidelity.In addition,the simulation results tend to evaluate the performance effectiveness of the FFFCHGS algorithm in terms of EC,packet loss rate(PLR),etc.

Modified Shuffled Frog Leaping Algorithm for Solving Economic Load Dispatch Problem

In the recent restructured power system scenario and complex market strategy, operation at absolute minimum cost is no longer the only criterion for dispatching electric power. The economic load dispatch (ELD) problem which accounts for minimization of both generation cost and power loss is itself a multiple conflicting objective function problem. In this paper, a modified shuffled frog-leaping algorithm (MSFLA), which is an improved version of memetic algorithm, is proposed for solving the ELD problem. It is a relatively new evolutionary method where local search is applied during the evolutionary cycle. The idea of memetic algorithm comes from memes, which unlike genes can adapt themselves. The performance of MSFLA has been shown more efficient than traditional evolutionary algorithms for such type of ELD problem. The application and validity of the proposed algorithm are demonstrated for IEEE 30 bus test system as well as a practical power network of 203 bus 264 lines 23 machines system.

Performance comparison of several optimization algorithms in matched field inversion

Optimization efficiencies and mechanisms of simulated annealing, genetic algorithm, differential evolution and downhill simplex differential evolution are compared and analyzed. Simulated annealing and genetic algorithm use a directed random process to search the parameter space for an optimal solution. They include the ability to avoid local minima, but as no gradient information is used, searches may be relatively inefficient. Differential evolution uses information from a distance and azimuth between individuals of a population to search the parameter space, the initial search is effective, but the search speed decreases quickly because differential information between the individuals of population vanishes. Local downhill simplex and global differential evolution methods are developed separately, and combined to produce a hybrid downhill simplex differential evolution algorithm. The hybrid algorithm is sensitive to gradients of the object function and search of the parameter space is effective. These algorithms are applied to the matched field inversion with synthetic data. Optimal values of the parameters, the final values of object function and inversion time is presented and compared.

Substation clustering based on improved KFCM algorithm with adaptive optimal clustering number selection

The premise and basis of load modeling are substation load composition inquiries and cluster analyses.However,the traditional kernel fuzzy C-means(KFCM)algorithm is limited by artificial clustering number selection and its convergence to local optimal solutions.To overcome these limitations,an improved KFCM algorithm with adaptive optimal clustering number selection is proposed in this paper.This algorithm optimizes the KFCM algorithm by combining the powerful global search ability of genetic algorithm and the robust local search ability of simulated annealing algorithm.The improved KFCM algorithm adaptively determines the ideal number of clusters using the clustering evaluation index ratio.Compared with the traditional KFCM algorithm,the enhanced KFCM algorithm has robust clustering and comprehensive abilities,enabling the efficient convergence to the global optimal solution.

A GA-Based Approach for FMS Machine Loading Planing

The machine loading problem in flexible manufacturing system is addressed in this paper. The problem is modelled as a mixed integer program. A Genetic Algorithm (GA) approach is developed to yield an optimal solution. In the genetic algorithm, chromosomes are encoded in term of operation routes. A point to point crossover search operator together with a Cyclic Shifting Mutation (CSM) operator is designed to adapt to the problem. At last computational experience with the model is presented, and the results show that our genetic algorithms are very powerful and suitable to machine loading problems.

Robust Optimization Method of Cylindrical Roller Bearing by Maximizing Dynamic Capacity Using Evolutionary Algorithms

Optimization of cylindrical roller bearings(CRBs)has been performed using a robust design.It ensures that the changes in the objective function,even in the case of variations in design variables during manufacturing,have a minimum possible value and do not exceed the upper limit of a desired range of percentage variation.Also,it checks the feasibility of design outcome in presence of manufacturing tolerances in design variables.For any rolling element bearing,a long life indicates a satisfactory performance.In the present study,the dynamic load carrying capacity C,which relates to fatigue life,has been optimized using the robust design.In roller bearings,boundary dimensions(i.e.,bearing outer diameter,bore diameter and width)are standard.Hence,the performance is mainly affected by the internal dimensions and not the bearing boundary dimensions mentioned formerly.In spite of this,besides internal dimensions and their tolerances,the tolerances in boundary dimensions have also been taken into consideration for the robust optimization.The problem has been solved with the elitist non-dominating sorting genetic algorithm(NSGA-II).Finally,for the visualization and to ensure manufacturability of CRB using obtained values,radial dimensions drawing of one of the optimized CRB has been made.To check the robustness of obtained design after optimization,a sensitivity analysis has also been carried out to find out how much the variation in the objective function will be in case of variation in optimized value of design variables.Optimized bearings have been found to have improved life as compared with standard ones.

Ant Lion Optimization Approach for Load Frequency Control of Multi-Area Interconnected Power Systems

This work proposes a novel nature-inspired algorithm called Ant Lion Optimizer (ALO). The ALO algorithm mimics the search mechanism of antlions in nature. A time domain based objective function is established to tune the parameters of the PI controller based LFC, which is solved by the proposed ALO algorithm to reach the most convenient solutions. A three-area interconnected power system is investigated as a test system under various loading conditions to confirm the effectiveness of the suggested algorithm. Simulation results are given to show the enhanced performance of the developed ALO algorithm based controllers in comparison with Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Bat Algorithm (BAT) and conventional PI controller. These results represent that the proposed BAT algorithm tuned PI controller offers better performance over other soft computing algorithms in conditions of settling times and several performance indices.