Bearing capacity of circular footings on multi-layered sand-waste tire shreds reinforced with geogrids

The presence of waste tires poses an environmental challenge as they occupy a significant amount of land and are expensive to dispose in landfills.However,reusing waste tires can address this issue when waste tires are used in geotechnical applications.To determine the viability of this approach,laboratoryscale tests were conducted to investigate load-bearing capacity of circular footings on sand-tire shred(STS)mixtures with shredded waste tire contents of 5%e15%by weight and three different widths of shreds.The investigation focused on analyzing the thickness of layers composed of STS mixtures,the soil cap,and the impact of geogrids on bearing capacity.The results indicate that a specific mixture of sand and tire shreds provides the highest footing-bearing capacity.In addition,the optimal shred content and size were found to be 10%by weight and 2 cm×10 cm,respectively.Furthermore,for a given tire shred width,a particular length provides the largest bearing capacity.The results agree well with that of previous research conducted by the first author and his colleagues in direct shear and California bearing ratio(CBR)tests.The primary finding of this research is that the use of two-layered STS mixtures reinforced by geogrids significantly enhances the bearing capacity.

Shaking table test of subgrade slope reinforced by gravity retaining wall with geogrids

Gravity retaining wall with geogrids has showed excellent seismic performance from Wenchuan great earthquake.However,seismic damage mechanism of this kind of wall is not sufficiently clear.In view of this,a large shaking table test of the gravity retaining wall with geogrids to reinforce the subgrade slope was carried out,and based on the HilbertHuang transform and the marginal spectrum theory,the energy identification method of the slope dynamic failure mode was studied.The results show that the geogrids can effectively reduce displacement and rotation of the retaining wall,and it can effectively absorb the energy of the ground movement when combined with the surrounding soil.In addition,it also reveals the failure development of the gravity retaining wall with geogrids to reinforce the subgrade slope.The damage started in the deep zone near the geogrids,and then gradually extended to the surface of the subgrade slope and other zones,finally formed a continuous failure surface along the geogrids.The analysis results of the failure mode identified by the Hilbert marginal spectrum are in good consistency with the experimental results,which prove that the Hilbert marginal spectrum can be applied to obtain the seismic damage mechanism of slope.

Experimental study on visco-elastic constitutive relationship and its parameters for geogrids

Geogrids are used as reinforcement materials widely in geotechnical and civil engineering fields. In this paper, a series of comparative tests on creep behavior of specific geoOgrids are conducted in the laboratory under different combinations of loading levels and environmental temperature. Based on the test results,comparative analyses are made to study long-term behaviors of isochronous load-strain curves, creep curves and relaxation curves for the specified geogrids. Furthermore, a constitutive model based on theory of visco-elasticity and tests results is proposed for geogrids and a rational procedure is presented in detail for determining the relevant parameters of the proposed model. Finally, the effect of tests temperature on model parameter values is investigated.

FINITE-ELEMENT MODELLING OF SOIL-GEOGRID INTERACTION DEALING WITH THE PULLOUT BEHAVIOUR OF GEOGRIDS

To predict the behavior of geogrids embedded in sand under pullout loading conditions, the two dimensional plane-stress finite element model was presented. The interactions between soil and geogrid were simulated as non-linear springs, and the stiffness of the springs was determined from simple tests in the specially designed pullout box. The predicted behavior of the geogrid under pullout load agrees well with the observed data including the load-displacement properties, the displacement distribution along the longitudinal direction and the mobilization of the frictional and bearing resistance. (Edited author abstract) 8 Refs.

一种空间查询高效的无线传感网络路由协议

在以数据为中心的大规模无线传感网络中,感知数据查询通常以空间查询为主,而感知节点携带能量极为有限,因此提高感知数据空间查询能量利用效率尤为重要。Geo Grid协议是一种完全基于地理位置信息的路由协议,适用于大规模无线传感网络应用场景,但其空间查询效率较低。针对大规模空间查询应用场景,从成簇方式、簇首选举、网络拓扑层次构建及路由策略等方面对Geo Grid进行优化,提出一种基于四叉树结构的空间查询能量高效的无线传感网络路由协议——QuadGrid,并对Geo Grid、QTBDC及Quad Grid的空间查询能耗进行仿真分析。实验结果表明,与Geo Grid、QTBDC相比,Quad Grid网络能耗更均衡,网络生命周期更长,空间查询更高效。

Design and evaluation of epoxy asphalt geogrid stress- absorbing layer

In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was designed. The EAGSAL consists of epoxy asphalt and fiberglass geogrid. The pull-out test, skewshearing test, bending beam test and fatigue test were conducted to evaluate the performance of the EAGSAL and a traditional stress-absorbing layer（ TSAL）. The results showthat the adhesive performance, shear performance, bending strength and fatigue performance of the EAGSAL with an optimal spraying volume of epoxy asphalt are better than those of optimally designed TSAL, and the maximum bending strain of the EAGSAL is very close to that of the TSAL. The EAGSAL has superior performance in reflective cracking resistance.Moreover, the EAGSAL with the optimal spraying volume of approximately 2. 0 L m^2 is thinner and lighter than the TSAL,which can decrease the thickness and improve the bearing ability of the whole pavement structure.

Improving Bearing Capacity of Weak Soils:A Review

Weak soils,such as soft clay and loose sand,have a poor bearing capaci­ty,making them incapable of bearing the load of superstructures that will be imposed on them.As a result,engineers must have a solution to the is­sue of poor bearing capacity in weak soils before embanking into building on them.This paper reviewed the use of stone columns,piled rafts,and geogrids for improving the bearing capability of weak soils.Important findings from recent research are also discussed.From the review of the previous researcher’s findings,it was found that modelling approaches such as physical modelling(full scale,centrifuge,laboratory scale)and numerical modelling are used to study bearing capacity improvement.

Stress distribution from railway track over geogrid reinforced ballast underlain by clay

Railway ballast forms a major component of a conventional rail track and is used to distribute the load to the subgrade, providing a smooth running surface for trains. It plays a significant role in providing support for the rail track base and distributing the load to the weaker layer underneath. Ballast also helps with drainage, which is an important factor for any type of transportation structure, including railroads. Over time, ballast progressively deforms and degrades under dynamic loading and loses its strength. In this study, extensive laboratory tests were conducted to investigate the effect of load amplitude, geogrid position, and number of geogrid layers, thickness of ballast layer and clay stiffness on the behavior of the reinforced ballast layer and induced strains in a geogrid. A half full-scale railway was constructed for carrying out the tests, which consisted of two rails 800 mm in length with three wooden sleepers(900 mm × 10 mm × 10 mm). Three ballast thicknesses of 200, 300 and 400 mm were used in the tests. The ballast was overlying 500 mm thickness clay in two states, soft and stiff. The tests were carried out with and without geogrid reinforcement; the tests were performed in a well-tied steel box of 1.5 m length ×1 m width ×1 m height. Laboratory tests were conducted to investigate the response of the ballast and the clay layers where the ballast was reinforced by a geogrid. Settlement in ballast and clay, soil pressure and pore water pressure induced in the clay were measured in reinforced and unreinforced ballast cases. It was concluded that the amount of settlement increased as the simulated train load amplitude increased, and there was a sharp increase in settlement up to cycle 500. After that, there was a gradual increase that leveled out between, 2500 to 4500 cycles depending on the frequency used. There was a slight increase in the induced settlement when the load amplitude increased from 0.5 to 1 ton but it was higher when the load amplitude increased to 2 tons. The increased amount in settlement depended on the existence of the geogrid and other parameters studied. The transmitted average vertical stress for ballast thicknesses of 30 cm and 40 cm increased as the load amplitude increased, regardless of the ballast reinforcement for both soft and stiff clay. The position of the geogrid had no significant effect on the transmitted stresses. The value of the soil pressure and pore water pressure on ballast thicknesses of 20 cm was higher than for 30 cm and 40 cm thicknesses. This meant that the ballast attenuated the induced waves. The soil pressure and pore water pressure for reinforced and unreinforced ballast was higher in stiff clay than in soft clay.

Model Test and Numerical Analysis on Long-Term Mechanical Properties of Stepped Reinforced Retaining Wall

Model tests and numerical analyses of stepped reinforced retaining wall were performed to investigate the effects of rheology of backfill and creep of geogrids on the long-term performance of the structure.The geogrid tensions,soil pressures,wall deformations and foundation pressure were measured during model construction and loading.A visco-elasto-plastic model and an empirical nonlinear visco-elastic model were utilized to simulate the stresses and deformations of geogrid-reinforced earth-retaining wall under long-term loads.By comparing test data with numerical results,it is shown that the foundation pressure distribution is nonlinear,and the lateral constraint of geogrids for backfill can cause a redistribution of foundation pressure.The curve of soil pressure is outside convex at each step initially,and it is close to the distribution for the case of vertical wall subsequently.The variation trend of geogrid tensions at different heights is obtained.Moreover,the failure mechanism and development mode of potential slip surface in retaining wall are proposed.

Load-bearing characteristics of square footing on geogrid-reinforced sand subjected to repeated loading

A series of dynamic model tests that were performed on a geogrid-reinforced square footing are presented.The dynamic(sinusoidal)loading was applied using a mechanical testing and simulation(MTS)electro-hydraulic servo loading system.In all the tests,the amplitude of loading was±160 kPa;the frequency of loading was 2 Hz.To better ascertain the effect of reinforcement,an unreinforced square footing was first tested.This was followed by a series of tests,each with a single layer of reinforcement.The reinforcement was placed at depths of 0.3B,0.6B and 0.9B,where B is the width of footing.The optimal depth of reinforcement was found to be 0.6B.The effect of adopting this value versus the other two depths was quantified.The single layer of geogrid had an effective reinforcement depth of 1.7B below the footing base.The increase of the depth between the topmost geogrid layer and the bottom of the footing(within the range of 0.9B)did not change the failure mode of the foundation.

Improved Simulation Method for Soil-Geogrid Interaction of Reinforced Earth Structure in FEM

The interaction between geogrid and soil is crucial for the stability of geogrid-reinforced earth structure. In finite element （FE） analysis, geogrids are usually assumed as beam or truss elements, and the interaction between geogrid and soil is considered as Coulomb friction resistance, which cannot reflect the true stress and displacement developed in the reinlbrcement. And the traditional Lagrangian elements used to simulate soil always become highly distorted and lose accuracy in high-stress blocks. An improved geogrid model that can produce shear resistance and passive resistance and a soil model using the Eulerian technique, in combination with the coupled Eulerian-Lagrangian （CEL） method, are used to analyze the interaction between geogrid and soil of reinforced foundation test in ABAQUS. The stress in the backfill, resistance of geogrid, and settlement of foundation were computed and the results of analysis agree well with the experimental results. This simulation method is of referential value for FE analysis of reinforced earth structure.

Development and Properties of Glass Fiber Reinforced Plastics Geogrid

Glass fiber reinforced plastics geogrid has a wide application in the field of soil reinforcement because of its high strength, good toughness, and resistance to environmental stress, creep resistance and strong stability. In order to get high-powered glass fiber reinforced plastics geogrid and its mechanical characteristics, the properties and physical mechanical index of geogrid have been got through the study of its raw material, production process and important quality index. The analysis and study have been made to the geogrid＇s mechanical properties with loading speed, three-axial compression, temperature tensile test and FLAC3D numerical simulation, thus obtain the mechanical parameters of its displacement time curve, breaking strength and elongation at break. Some conclusions can be drawn as follows： （a） Using glass fiber materials, knurling and coated projection process, the f^acture strength and corrosion resistance of geogrid are greatly improved and the interlocking bite capability of soil is enhanced. （b） The fracture strength of geogrid is related to temperature and loading rate. When the surrounding rock pressure is fixed, the strength and anti-deformation ability of reinforced soil are significantly enhanced with increasing reinforced layers. （c） The pullout test shows the positive correlation between geogrid displacement and action time. （d） As a new reinforced material, the glass fiber reinforced plastics geogrid is not mature enough in theoretical research and practical experience, so it has become an urgent problem both in theoretical study and practical innovation.

Experimental Study on Performance of Multidirectional Geogrid and Its Application in Engineering of High Slope

By analyzing the grille mechanical property, tensile strength and creep tests, and the fi eld tests, we investigated the characteristics and the reinforcement principle of multidirectional geogrid, and obtained the effect factors of grid characteristics, load and time curve and the shear stress of grille and sand interface. The reinforcement effect of geogrid in combination of typical project cases was illustrated and the following conclusions were presented. Firstly, multidirectional geogrid has ability to resist structural deformation, node distortion or soil slippage under stress, and can effectively disperse load. Secondly, with the increase of tensile rate, grille intensity increases and the creep value also increases with the increase of load. Thirdly, the frictional resistance balance between horizontal thrust of damaged zone and reinforced soil in stable region can avoid slope failure due to excessive lateral deformation. Fourthly, the multidirectional geogrid is able to withstand the vertical, horizontal and diagonal forces by combing them well with three-dimensional orientation, realizing the purpose of preventing soil erosion and slope reinforcement, which has a wide range of application and development in engineering fi eld.

Effect of geogrid reinforcement on soft and medium dense soils

The field tests were carried out to examine the reinforcement effect of a geogrid on various conditions of embankment height,the number of passages of vibratory roller,the number of reinforced layer of geogrid,and soil properties.The test results of the dynamic earth pressure indicate that the soil reinforced by geogrid is very effective to increase the stiffness of soil,especially in soft soil.The dynamic earth pressure ratio,which is defined as the ratio of dynamic earth pressure to self weight of soils,exponentially decreases as the embankment height increases.The dynamic earth pressure ratio increases up to 80% for soft soils reinforced by both one layer of geogrid in place of no reinforced soils and two layers in place of a single layer of geogrid.

Visualization of pullout behaviour of geogrid in sand with emphasis on size effect of protrusive junctions

Geogrid has been extensively used in geotechnical engineering practice due to its effectiveness and economy. Deep insight into the interaction between the backfill soil and the geogrid is of great importance for proper design and construction of geogrid reinforced earth structures. Based on the calibrated model of sand and geogrid, a series of numerical pullout tests are conducted using PFC^(3D) under special considerations of particle angularity and aperture geometry of the geogrid. In this work, interface characteristics regarding the displacement and contact force developed among particles and the deformation and force distribution along the geogrid are all visualized with PFC^(3D) simulations so that new understanding on how geogrid-soil interaction develops under pullout loads can be obtained. Meanwhile, a new variable named fabric anisotropy coefficient is introduced to evaluate the inherent relationship between macroscopic strength and microscopic fabric anisotropy. A correlation analysis is adopted to compare the accuracy between the newly-proposed coefficient and the most commonly used one. Furthermore, additional pullout tests on geogrid with four different joint protrusion heights have been conducted to investigate what extent and how vertical reinforcement elements may result in reinforcement effects from perspectives of bearing resistance contribution, energy dissipation, as well as volumetric response. Numerical results show that both the magnitude and the directional variation of normal contact forces govern the development of macroscopic strength and the reinforcing effects of joint protrusion height can be attributed to the accelerated energy dissipation across the particle assembly and the intensive mobilization of the geogrid.

Evaluation of parameters affecting reflection cracking in geogrid-reinforced overlay

The influence of the most important parameters on the service life of reinforced asphalt overlay with geogrid materials in bending mode was examined by employing the Taguchi method and analysis of variance techniques. The objectives of this experiment was to investigate the effects of grid stiffness, tensile strength, coating type, amount of tack coat, overlay thickness, crack width and stiffnesses of asphalt overlay and existing asphalt concrete on propagation of the reflection cracking. Results indicate that the stiffnesses of cracked layer and overlay are the main significant factors that can directly improve the service life of an overlay against the reflection cracking. Generally, glass grid is more effective in reinforced overlay than polyester grid. Effect of crack width of the existing layer is significant when its magnitude increases from 6 to 9 mm.

Material Properties and Tensile Behaviors of Polypropylene Geogrid and Geonet for Reinforcement of Soil Structures

The properties and tensile behaviors of polypropylene (PP) geogrids and geonets for reinforcement of soil structures are investigated.Mass per unit area of the geogrids and geonets was weighed using an electronic balance and aperture sizes of the geonets were exactly measured using a computer.Laboratory tests were performed using a small tensile machine capable of monitoring tensile force and displacement.Tensile failure behaviors were described,and tensile index properties such as tensile strength,maximum tensile strain,tensile forces corresponding to different strains in the geogrids and gronets were obtained.The characterization of these indexes is discussed.

Mechanism of Geogrid Reinforced Soil at Bridge Approach

Using Geogrid-Reinforced Soil （GRS） we studied the working mechanism and design method of GRS at bridge approach with high backfill by field experiment. In a highway section where the height of backfill is 13.5 meters, geogrids were used at two bridge approaches to address the bumping problems. Some soil pressure cells were used to measure the normal and lateral soil pressure at different locations in the roadbed. The experimental results indicate that geogrids in geogrid-reinforced soil （GRS） could produce an uplift force, the closer the location to the abutment, the larger the uplift force, and the reduction of measured soil pressures compared with theoretical values was the largest at the bottom of roadbed, less at the top than at the bottom, and the least in the mid-height of roadbed than at the bottom. These findings are different from those of the traditional greogrid-reinforced subgrade design method,

Outdoor Aging Performance of HDPE Geogrid

An outdoor aging test base for geosynthetics was established in Wuhan,central China to investigate the long-term aging performance of geosynthetics. Outdoor photo-oxygen aging tests for high density polyethylene(HDPE) geogrid have been carried out in the base. Test results show that in the initial nine months,the tensile strength of geogrid remains unchanged or even gets larger,while the corresponding strain at break decreases slightly,exhibiting hard and brittle trend due to secondary compensatory responses to the ultraviolet(UV) aging: UV provides the required chemical crosslinking energy,resulting in the polymer crosslinking reaction. Tensile strength of the geogrid increases by about 5% in the initial nine months,but decreases after the initial nine months. The long-term research results at the test base could provide first-hand data for researching the aging properties of HDPE geogrid.

Experimental study on soil improvement with stone columns and granular blankets

Stone column is one of the soil stabilizing methods that is used to increase bearing capacity and decrease the settlement of soft soils.Reinforced and unreinforced granular blankets are now being utilized to overcome the problems of soft soils.In this research,the bearing capacity of stone columns,granular blanket,and a combination of both methods in reinforced and unreinforced modes were studied using scaled physical models.Results show that using granular blanket,stone column,and combination of both improves bearing capacity of soft soils.Using geogrid as the reinforcement of granular blankets and geotextile as stone-column encasement increases the efficiency of granular blankets and stone columns significantly.Additionally,in the case of using geotextile around the stone column,the stress concentration ratio of the stone column will increase as well as its rigidity and bearing capacity.