An Expression for Gravity Generated by an Anomalous Geological Body and Its Application in Bathymetry Inversion

The gravity anomaly and vertical gravity gradient due to anomalous geological bodies are mainly computed by numerical methods,so it is difficult and time-consuming to use the gravity-geological method to invert seafloor topography.This paper addresses this issue by deriving an expression for gravity generated by a cylinder based on a series expansion.The choice of number for terms in the series is estimated by comparing with the numerical method,especially when the depth H=4000m,the accuracy of 1 mGal(1 Gal=10^(-2)m/s^(2))can be achieved when the series are 9.The expressions can be used to establish the relationships between the shape of an anomalous body and the generated vertical gravity and vertical gravity gradient,respectively.Finally,the potential applications of the expressions in inverting seafloor topography are illustrated by synthetic examples.

“Extreme utilization” theory and practice in gas storages with complex geological conditions

Based on more than 20-year operation of gas storages with complex geological conditions and a series of research findings, the pressure-bearing dynamics mechanism of geological body is revealed. With the discovery of gas-water flowing law of multi-cycle relative permeability hysteresis and differential utilization in zones, the extreme utilization theory targeting at the maximum amount of stored gas, maximum injection-production capacity and maximum efficiency in space utilization is proposed to support the three-in-one evaluation method of the maximum pressure-bearing capacity of geological body, maximum well production capacity and maximum peak shaving capacity of storage space. This study realizes the full potential of gas storage(storage capacity) at maximum pressure, maximum formation-wellbore coordinate production, optimum well spacing density match with finite-time unsteady flow, and peaking shaving capacity at minimum pressure, achieving perfect balance between security and capacity. Operation in gas storages, such as Hutubi in Xinjiang, Xiangguosi in Xinan, and Shuang6 in Liaohe, proves that extreme utilization theory has promoted high quality development of gas storages in China.

Cybernetics of Engineering Geological Bodies

ＣｙｂｅｒｎｅｔｉｃｓｏｆＥｎｇｉｎｅｅｒｉｎｇＧｅｏｌｏｇｉｃａｌＢｏｄｉｅｓＢｙＬｉａｎｇＪｉｏｎｇｊｉｕｎ；ＨｕａｎｇＤｉｎｇｃｈｅｎｇ；ＸｉｎｇＮｉａｎｘｉｎｉａｎｄＬｉｎＸｕａｎｑｉｎｇ（ＩｎｓｌｉｔｕｔｅｏｆＤｅｓｉｇｎａｎｄＲｅｓｅａｒ...

From the new Austrian tunneling method to the geoengineering condition evaluation and dynamic controlling method

The new Austrian tunneling method （NATM） is widely applied in design and construction of underground engineering projects. When the type and distribution of unfavorable geological bodies （UGBs） associated with their influences on geoengineering are complicated or unfortunately are overlooked, we should pay more attentions to internal features of rocks grades IV and V （even in local but mostly controlling zones）. With increasing attentions to the characteristics, mechanism and influences of engineering construction-triggered geohazards, it is crucial to fully understand the disturbance of these geohazards on project construction. A reasonable determination method in construction procedure, i.e. the shape of working face, the type of engineering support and the choice of feasible procedure, should be considered in order to mitigate the construction-triggered geohazards. Due to their high sensitivity to groundwater and in-situ stress, various UGBs exhibit hysteretic nature and failure modes. To give a complete understanding on the internal causes, the emphasis on advanced comprehensive geological forecasting and overall reinforcement treatment is therefore of more practical significance. Compre- hensive evaluation of influential factors, identification of UGB, and measures of discontinuity dynamic controlling comprises the geoengineering condition evaluation and dynamic controlling method. In a case of a cut slope, the variations of UGBs and the impacts of key environmental factors are presented, where more severe construction-triggered geohazards emerged in construction stage than those predicted in design and field investigation stages. As a result, the weight ratios of different influential factors with respect to field investigation, design and construction are obtained.

Architecture of Sandstone Bodies of Paleogene Shahejie Formation in Northern Qikou Sag, Northeast China

The conception of special geologic bodies has been applied in this study to define and illustrate economic oil and gas reservoirs in sandbodies, which is helpful for hydrocarbon forecast and exploration. Using the comprehensive analysis of drilling, logging, seismic, seismic attribute extraction, and logging constrained inversion in 3D data volume, the special geologic bodies of the Shahejie Formation（Ps^1s） in northern Qikou sag, which have good hydrocarbon potential, are identified and described under the constraint of sequence stratigraphic framework. The dimensions, geometry, and spatial distribution features of the special geologic bodies, as well as their inner architectures and sequence-structure patterns, are also ascertained. The geologic bodies evolved from relative centralization in the middle part of the lacustrine basin in the early stage of Ps1~s Formation, to several dispersive isolated parts in the later stage. This shows a small cycle interval（~2.5 Ma） at the end of the whole transgressive depositional process of Ps1（~7.5 Ma） during the expansion of the lake and relative lake level rise, with the control of sediments supply and fault-related subsidence, which effect the evolution of the sedimentary system. According to the relevance and regularity of the geologic bodies＇ development, different types of potential profitable reservoir traps, including the lithologic lenticular traps, lithologic updip pinchout traps, and structural-lithologic composite traps, can be preserved in the study area. In addition, the internal architecture models provide scientific basis for further hydrocarbon exploration in the frontier basin without enough data.