Geothermic activity and seismotectonics in the altitude of the Tibetan plateau

In the present analysis on the relationships among the depth of lithosphere brittle fracture, seismotectonics and geothermal anomalous active in Tibetan plateau were investigated using the seismic dada from ISC and Chinese seismic net and geothermal data. The results suggest that the region of anomalously geothermal activity almost coincides with that of the normal faulting type earthquake. The geothermal anomaly activity region coincides spatially with that of the events deeper than 60 km as well as. The normal faulting earthquakes may be mainly tectonic activity regimes until 110 km deep in the thermal anomaly region. The strike directions of events are likely the N-S direction, coinciding with the strike of the thermal anomaly active belts. The earthquakes align along the normal faults and faulted-depression zone with the N-S direction. The thermal anomaly activity also distributes along the faulted-depression zone. Many events deeper than 60 km exist in the anomalously geothermal activity region in the plateau. Events extend to bottom of the lithosphere of 110 km from the surface, like columnar seismic crowd. The lithosphere extends along the E-W direction due to the E-W extensional stress in the central and southern Tibetan plateau, altitude of the plateau. The t6nsional stress in the E-W results in the lithosphere fractures and the normal faults striking N-S direction, grabens and faulted-depression zones. Thermal material from the asthenosphere wells upward to the surface along deep seismic fractures and faults through the thick crust. The anomalously thermal activities are attributable to the upwelling thermal material from the mantle in the altitude of Tibetan plateau.

Conventional Geothermal Systems and Unconventional Geothermal Developments: An Overview

This paper provides an overview of conventional geothermal systems and unconventional geothermal developments as a common reference is needed for discussions between energy professionals. Conventional geothermal systems have the heat, permeability and fluid, requiring only drilling down to °C, normal heat flow or decaying radiogenic granite as heat sources, and used in district heating. Medium-temperature (MT) 100°C - 190°C, and high-temperature (HT) 190°C - 374°C resources are mostly at plate boundaries, with volcanic intrusive heat source, used mostly for electricity generation. Single well capacities are °C - 500°C) and a range of depths (1 m to 20 Km), but lack permeability or fluid, thus requiring stimulations for heat extraction by conduction. HVAC is 1 - 2 m deep and shallow geothermal down to 500 m in wells, both capturing °C, with °C are either advanced by geothermal developers at <7 Km depth (Enhanced Geothermal Systems (EGS), drilling below brittle-ductile transition zones and under geothermal fields), or by the Oil & Gas industry (Advanced Geothermal Systems, heat recovery from hydrocarbon wells or reservoirs, Superhot Rock Geothermal, and millimeter-wave drilling down to 20 Km). Their primary aim is electricity generation, relying on closed-loops, but EGS uses fractures for heat exchange with earthquake risks during fracking. Unconventional approaches could be everywhere, with shallow geothermal already functional. The deeper and hotter unconventional alternatives are still experimental, overcoming costs and technological challenges to become fully commercial. Meanwhile, the conventional geothermal resources remain the most proven opportunities for investments and development.

Current status and construction scheme of smart geothermal field technology

To address the key problems in the application of intelligent technology in geothermal development,smart application scenarios for geothermal development are constructed.The research status and existing challenges of intelligent technology in each scenario are analyzed,and the construction scheme of smart geothermal field system is proposed.The smart geothermal field is an organic integration of geothermal development engineering and advanced technologies such as the artificial intelligence.At present,the technology of smart geothermal field is still in the exploratory stage.It has been tested for application in scenarios such as intelligent characterization of geothermal reservoirs,dynamic intelligent simulation of geothermal reservoirs,intelligent optimization of development schemes and smart management of geothermal development.However,it still faces many problems,including the high computational cost,difficult real-time response,multiple solutions and strong model dependence,difficult real-time optimization of dynamic multi-constraints,and deep integration of multi-source data.The construction scheme of smart geothermal field system is proposed,which consists of modules including the full database,intelligent characterization,intelligent simulation and intelligent optimization control.The connection between modules is established through the data transmission and the model interaction.In the next stage,it is necessary to focus on the basic theories and key technologies in each module of the smart geothermal field system,to accelerate the lifecycle intelligent transformation of the geothermal development and utilization,and to promote the intelligent,stable,long-term,optimal and safe production of geothermal resources.

Geochemical and Isotopic Techniques Constraints on the Origin,Evolution,and Residence Time of Low-enthalpy Geothermal Water in Western Wugongshan,SE China

Geothermal resources are increasingly gaining attention as a competitive,clean energy source to address the energy crisis and mitigate climate change.The Wugongshan area,situated in the southeast coast geothermal belt of China,is a typical geothermal anomaly and contains abundant medium-and low-temperature geothermal resources.This study employed hydrogeochemical and isotopic techniques to explore the cyclic evolution of geothermal water in the western Wugongshan region,encompassing the recharge origin,water-rock interaction mechanisms,and residence time.The results show that the geothermal water in the western region of Wugongshan is weakly alkaline,with low enthalpy and mineralization levels.The hydrochemistry of geothermal waters is dominated by Na-HCO_(3)and Na-SO_(4),while the hydrochemistry types of cold springs are all Na-HCO_(3).The hydrochemistry types of surface waters and rain waters are NaHCO_(3)or Ca-HCO_(3).The δD and δ^(18)O values reveal that the geothermal waters are recharged by atmospheric precipitation at an altitude between 550.0 and 1218.6 m.Molar ratios of maj or solutes and isotopic compositions of^(87)Sr/^(86)Sr underscore the significant role of silicate weathering,dissolution,and cation exchange in controlling geothermal water chemistry.Additionally,geothermal waters experienced varying degrees of mixing with cold water during their ascent.Theδ^(13)C values suggest that the primary sources of carbon in the geothermal waters were biogenic and organic.Theδ^(34)S value suggests that the sulfates in geothermal water originate from sulfide minerals in the surrounding rock.Age dating using 3H and^(14)C isotopes suggests that geothermal waters have a residence time exceeding 1 kaBP and undergo a long-distance cycling process.

A tectono-thermal perspective on the petroleum generation,accumulation and preservation in the southern Ordos Basin, North China

The southern Ordos Basin has excellent petroleum exploration prospects.However,the tectono-thermal history and the controls on petroleum generation,accumulation and preservation conditions in southern basin are unclear.In this study,we analyzed the present geothermal field,paleo-geothermal gradient,maturity of the hydrocarbon source rocks,uplift and cooling process and tectono-thermal evolution history.In the study area,for the Ordovician,Permain and the Triassic strata,the present temperature is low(3070℃)in the southeastern area but high(80140℃)in the northwestern area.The paleogeothermal gradient varied from 24℃/km to 30℃/km with a heat flow of 58—69 m W/m^(2)(i.e.,a medium-temperature basin).The paleo-temperatures are higher than the present temperatures and the maximum paleo-temperatures controlled the thermal maturity of the source rocks.The vitrinite reflectance(Ro)values of the Triassic strata are>0.7%and the thermal maturity reached the middlemature oil generation stage.The Rovalues of the Permian-Ordovician strata are>1.8%and the thermal maturity reached the over-mature gas generation stage.The southern Ordos Basin has experienced the multiple tectonic events at the Late Ordovician Caledonian(452 Ma),Late Triassic(215 Ma),Late Jurassic(165160 Ma),End-Early Cretaceous(110100 Ma)and Cenozoic(since 40 Ma).A large-scale tectonothermal event occurred at the End-Early Cretaceous(110100 Ma),which was controlled by lithospheric extension,destruction and thinning.This event led to the highest paleo-temperatures and thermal maturities and coeval with the peak period of petroleum generation and accumulation.The southern Ordos Basin has undergone rapid and large-scale uplift since the Late Cretaceous due to expansion of the northeastern margin of the Tibetan Plateau,uplift of the Qinling orogenic belt and thrust faulting in the Liupanshan tectonic belt.The southern Ordos Basin experienced tectonic overprinting that was strong in the south and weak in the north.The strongest overprinting occurred in the southwestern part of the basin.The large-scale uplift,denudation and faulting led to oil and gas loss from reservoirs.The petroleum generation,accumulation and preservation in the southern Ordos Basin were affected by deep lithospheric structures and the tectono-thermal evolution.This work provides a novel tectono-thermal perspective on the petroleum generation,accumulation and preservation condition of the southern Ordos Basin.

Long-term hydrochemical monitoring and geothermometry:understanding groundwater salinization and thermal fluid contamination in Mila’s basin,Northeastern Algeria

The regular hydrochemical monitoring of groundwater in the Mila basin over an extended period has provided valuable insights into the origin of dissolved salts and the hydrogeochemical processes controlling water salinization.The data reveals that the shallow Karst aquifer shows an increase in TDS of 162 mg L^(-1) while the ther-mal carbonate aquifer that is also used for drinking water supply exhibits an increase of 178 mg L^(-1).Additionally,significant temperature variations are recorded at the sur-face in the shallow aquifers and the waters are carbo-gaseous.Analysis of dissolved major and minor elements has identified several processes influencing the chemical composition namely:dissolution of evaporitic minerals,reduction of sulphates,congruent and incongruent car-bonates’dissolution,dedolomitization and silicates’weathering.The hydrogeochemical and geothermometric results show a mixing of saline thermal water with recharge water of meteoric origin.Two main geothermalfields have been identified,a partially evolved water reservoir and a water reservoir whosefluid interacts with sulphuric acid(H_(2)S)of magmatic origin.These hot waters that are char-acterized by a strong hydrothermal alteration do ascend through faults and fractures and contribute to the contamination of shallower aquifers.Understanding the geothermometry and the hydrogeochemistry of waters is crucial for managing and protecting the quality of groundwater resources in the Mila basin,in order to ensure sustainable water supply for the region.A conceptual model for groundwater circulation and mineralization acquisition has been established to further enhance under-standing in this regard.

Evaluation of development potential of pumped hydroelectric storage and geothermal utilization system in abandoned coal mine

Every year in China,a significant number of mines are closed or abandoned.The pumped hydroelectric storage(PHS)and geothermal utilization are vital means to efficiently repurpose resources in abandoned mine.In this work,the development potentials of the PHS and geothermal utilization systems were evaluated.Considering the geological conditions and meteorological data available of Jiahe abandoned mine,a simple evaluation model for PHS and geothermal utilization was established.The average efficiency of the PHS system exceeds 70%and the regulatable energy of a unit volume is over 1.53 kW·h/m^(3).The PHS system achieves optimal performance when the wind/solar power ratio reaches 0.6 and 0.3 in daily and year scale,respectively.In the geothermal utilization system,the outlet temperature and heat production are significantly affected by the injection flow rate.The heat production performance is more stable at lower rate flow,and the proportion of heat production is higher in the initial stage at greater flow rate.As the operating time increases,the proportion of heat production gradually decreases.The cyclic heat storage status has obvious advantages in heat generation and cooling.Furthermore,the energy-saving and emission reduction benefits of PHS and geothermal utilization systems were calculated.

Effects of fracture evolution and non-Darcy flow on the thermal performance of enhanced geothermal system in 3D complex fractured rock

In fractured geothermal reservoirs,the fracture networks and internal fluid flow behaviors can significantly impact the thermal performance.In this study,we proposed a non-Darcy rough discrete fracture network(NR-DFN)model that can simultaneously consider the fracture evolution and non-Darcy flow dynamics in studying the thermo-hydro-mechanical(THM)coupling processes for heat extraction in geothermal reservoir.We further employed the model on the Habanero enhanced geothermal systems(EGS)project located in Australia.First,our findings illustrate a clear spatial-temporal variation in the thermal stress and pressure perturbations,as well as uneven spatial distribution of shear failure in 3D fracture networks.Activated shear failure is mainly concentrated in the first fracture cluster.Secondly,channeling flow have also been observed in DFNs during heat extraction and are further intensified by the expansion of fractures driven by thermal stresses.Moreover,the combined effect of non-Darcy flow and fracture evolution triggers a rapid decline in the resulting heat rate and temperature.The NR-DFN model framework and the Habanero EGS's results illustrate the importance of both fracture evolution and non-Darcy flow on the efficiency of EGS production and have the potential to promote the development of more sustainable and efficient EGS operations for stakeholders.

Fracture sealing performance of granular lost circulation materials at elevated temperature:A theoretical and coupled CFD-DEM simulation study

Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulation.However,conventional LCMs seem ineffective in high-temperature formations.This may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature conditions.To understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in fractures.We summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling fluid.We conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing temperatures.The results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid viscosity.Smaller,softer,and less frictional LCM particles have lower bridging probability and slower bridging initiation.Smaller particles tend to form dual-particle bridges rather than single-particle bridges.These result in a deeper,tighter,but unstable sealing zone.Reduced drilling fluid viscosity leads to faster and shallower sealing zones.

Applications of artificial intelligence in geothermal resource exploration: A review

Artificial intelligence (AI) has become increasingly important in geothermal exploration,significantly improving the efficiency of resource identification.This review examines current AI applications,focusing on the algorithms used,the challenges addressed,and the opportunities created.In addition,the review highlights the growth of machine learning applications in geothermal exploration over the past decade,demonstrating how AI has improved the analysis of subsurface data to identify potential resources.AI techniques such as neural networks,support vector machines,and decision trees are used to estimate subsurface temperatures,predict rock and fluid properties,and identify optimal drilling locations.In particular,neural networks are the most widely used technique,further contributing to improved exploration efficiency.However,the widespread adoption of AI in geothermal exploration is hindered by challenges,such as data accessibility,data quality,and the need for tailored data science training for industry professionals.Furthermore,the review emphasizes the importance of data engineering methodologies,data scaling,and standardization to enable the development of accurate and generalizable AI models for geothermal exploration.It is concluded that the integration of AI into geothermal exploration holds great promise for accelerating the development of geothermal energy resources.By effectively addressing key challenges and leveraging AI technologies,the geothermal industry can unlock cost‐effective and sustainable power generation opportunities.

A Distributionally Robust Optimization Scheduling Model for Regional Integrated Energy Systems Considering Hot Dry Rock Co-Generation

Hot dry rock(HDR)is rich in reserve,widely distributed,green,low-carbon,and has broad development potential and prospects.In this paper,a distributionally robust optimization(DRO)scheduling model for a regionally integrated energy system(RIES)considering HDR co-generation is proposed.First,the HDR-enhanced geothermal system(HDR-EGS)is introduced into the RIES.HDR-EGS realizes the thermoelectric decoupling of combined heat and power(CHP)through coordinated operation with the regional power grid and the regional heat grid,which enhances the system wind power(WP)feed-in space.Secondly,peak-hour loads are shifted using price demand response guidance in the context of time-of-day pricing.Finally,the optimization objective is established to minimize the total cost in the RIES scheduling cycle and construct a DRO scheduling model for RIES with HDR-EGS.By simulating a real small-scale RIES,the results show that HDR-EGS can effectively promote WP consumption and reduce the operating cost of the system.

Geothermo-mechanical alterations due to heat energy extraction in enhanced geothermal systems: Overview and prospective directions

Geothermal energy from deep underground (or geological) formations,with or without its combination with carbon capture and storage (CCS),can be a key technology to mitigate anthropogenic greenhouse gas emissions and meet the 2050 net‐zero carbon emission target.Geothermal resources in low‐permeability and medium‐and high‐temperature reservoirs in sedimentary sequence require hydraulic stimulation for enhanced geothermal systems (EGS).However,fluid migration for geothermal energy in EGS or with potential CO_(2) storage in a CO_(2)‐EGS are both dependent on the in situ flow pathway network created by induced fluid injection.These thermo‐mechanical interactions can be complex and induce varying alterations in the mechanical response when the working fluid is water (in EGS) or supercritical CO_(2)(in CO_(2)‐EGS),which could impact the geothermal energy recovery from geological formations.Therefore,there is a need for a deeper understanding of the heat extraction process in EGS and CO_(2)‐EGS.This study presents a systematic review of the effects of changes in mechanical properties and behavior of deep underground rocks on the induced flow pathway and heat recovery in EGS reservoirs with or without CO_(2) storage in CO_(2) ‐EGS.Further,we proposed waterless‐stimulated EGS as an alternative approach to improve heat energy extraction in EGS.Lastly,based on the results of our literature review and proposed ideas,we recommend promising areas of investigation that may provide more insights into understanding geothermo‐mechanics to further stimulate new research studies and accelerate the development of geothermal energy as a viable clean energy technology.

Progress in research on the exploration and evaluation of deep geothermal resources in the Fujian-Guangdong-Hainan region,China

Deep geothermal resources in the Fujian-Guangdong-Hainan region,China,offer significant potential for sustainable energy.The diverse igneous rock formations along the southeast coast present intricate geological challenges that impede exploration and evaluation efforts.In this study,we address critical concerns related to the Fujian-Guangdong-Hainan region's deep geothermal resources,encompassing heat source composition,formation conditions,strategic favorable areas,and exploration directions.Our methods involve the analysis of regional geothermal reservoirs and cap rocks.Major findings include:the primary heat sources in the Fujian-Guangdong-Hainan region consist of the radioactive heat generation from granites in the crust,heat conduction in the mantle,and,in specific areas like Yangjiang and Shantou,melts within the middle and lower crust;the deep,high-temperature geothermal resources in the region predominantly reside in basins'depressed areas.These areas are characterized by the confluence of triple heat sources:heat from the Earth's crust,mantle,and other supplementary sources;our analysis led to the identification of three strategic areas favorable for deep geothermal resources in the Fujian-Guangdong-Hainan region.These are the Beibu Gulf Basin's continental area,the Yuezhong Depression,and the Fuzhou-Zhangzhou area.

Impact of well placement and flow rate on production efficiency and stress field in the fractured geothermal reservoirs

Geothermal energy has gained wide attention as a renewable alternative for mitigating greenhouse gas emissions.The advancements in enhanced geothermal system technology have enabled the exploitation of previously inaccessible geothermal resources.However,the extraction of geothermal energy from deep reservoirs poses many challenges due to high‐temperature and high‐geostress conditions.These factors can significantly impact the surrounding rock and its fracture formation.A comprehensive understanding of the thermal–hydraulic–mechanical(THM)coupling effect is crucial to the safe and efficient exploitation of geothermal resources.This study presented a THM coupling numerical model for the geothermal reservoir of the Yangbajing geothermal system.This proposed model investigated the geothermal exploitation performance and the stress distribution within the reservoir under various combinations of geothermal wells and mass flow rates.The geothermal system performance was evaluated by the criteria of outlet temperature and geothermal productivity.The results indicate that the longer distance between wells can increase the outlet temperature of production wells and improve extraction efficiency in the short term.In contrast,the shorter distance between wells can reduce the heat exchange area and thus mitigate the impact on the reservoir stress.A larger mass flow rate is conducive to the production capacity enhancement of the geothermal system and,in turn causes a wider range of stress disturbance.These findings provide valuable insights into the optimization of geothermal energy extraction while considering reservoir safety and long‐term sustainability.This study deepens the understanding of the THM coupling effects in geothermal systems and provides an efficient and environmentally friendly strategy for a geothermal energy system.

Radiogenic geothermal systems of Bangka Island,Indonesia:Implications of high heat production and tectonic framework

The presence of geothermal manifestation in Bangka Island(Southeast Sumatra,Indonesia)with the absence of Quaternary volcanic activity and also relatively low seismicity events has raised intriguing questions on the control of the geothermal system in this area.As the regional tectonic setting of Indonesia volcanic geothermal systems has been known,that of non-volcanic geothermal systems such as radiogenic system become an issue to be investigated.This study reports the geochemistry and petrography analysis of Triassic granite related to radiogenic production at the vicinity of hot springs in Bangka Island.Surface temperatures of the Bangka hot springs range from 37 to 70.7 and pH values vary between 5.6 and 7.5.These hot springs are discharging either in close to massive granite bodies or occur in between two major NE-SW striking faults zones,i.e.,Pemali fault and Payung fault.Our results indicate the average radiogenic heat production of Late Triassic Klabat granite in the northern area ranges from 28.5 to 38.34μWm^(-3)and the southern area ranges from 28.3 to 49.5μWm^(-3).In comparison to similar granite belt located in Malaysia,heat production of granitoid in Bangka hot springs is four times higher,possibly due to their different granite origins.

3D and 2D topographic correction to estimated geothermal gradient from the base of gas hydrate stability zone in the Andaman Forearc Basin

Methane gas hydrate related bottom-simulating reflectors(BSRs)are imaged based on the in-line and cross-line multi-channel seismic(MCS)data from the Andaman Forearc Basin.The depth of the BSR depends on pressure and temperature and pore water salinity.With these assumptions,the BSR depth can be used to estimate the geothermal gradient(GTG)based on the availability of in-situ temperature measurements.This calculation is done assuming a 1D conductive model based on available in-situ temperature measurement at site NGHP-01-17 in the study area.However,in the presence of seafloor topography,the conductive temperature field in the subsurface is affected by lateral refraction of heat,which focuses heat in topographic lows and away from topographic highs.The 1D estimate of GTG in the Andaman Forearc Basin has been validated by drilling results from the NGHP-01 expedition.2D analytic modeling to estimate the effects of topography is performed earlier along selected seismic profiles in the study area.The study extended to estimate the effect of topography in 3D using a numerical model.The corrected GTG data allow us to determine GTG values free of topographic effect.The difference between the estimated GTG and values corrected for the 3D topographic effect varies up to~5℃/km.These conclude that the topographic correction is relatively small compared to other uncertainties in the 1D model and that apparent GTG determined with the 1D model captures the major features,although the correction is needed prior to interpreting subtle features of the derived GTG maps.

Mapping and resource evaluation of deep high-temperature geothermal resources in the Jiyang Depression,China

In China,geothermal resource utilization has mainly focused on resources at shallow and medium depths.Yet,the exploration of deep,high-temperature geothermal resources holds significant importance for achieving the“dual carbon”goals and the transition of energy structure.The Jiyang Depression in the Bohai Bay Basin has vast potential for deep,high-temperature geothermal resources.By analyzing data from 2187 wells with temperature logs and 270 locations for temperature measurement in deep strata,we mapped the geothermal field of shallow to medium-deep layers in the Jiyang Depression using ArcGIS and predicted the temperatures of deep layers with a burial depth of 4000 m.Through stochastic modeling and numerical simulation,a reservoir attribute parameter database for favorable deep,high-temperature geothermal areas was developed,systematically characterizing the spatial distribution of geothermal resources within a play fairway of 139.5 km2 and estimating the exploitable deep geothermal resource potential by using the heat storage method and Monte Carlo data analysis.The study reveals that the Fan 54 well block in the Boxing-Jijia region is of prime significance to develop deep,high-temperature geothermal resources in the Jiyang Depression.Strata from the Cenozoic to the Upper Paleozoic are identified as effective cap layers for these deep geothermal resources.The Lower Paleozoic capable of effectively storing thermal energy and possessing an exploitable resource volume up to 127 million tons of standard coal,is identified as a target system for the development of deep high-temperature geothermal resources,providing significant insights for the efficient development of geothermal resources in the Jiyang Depression.

Origin of high heat flow in the back-arc basins of Sumatra:An opportunity for geothermal energy development

Volcanic arcs such as the Barisan Mountains have been identified as attractive areas for the utilization of geothermal energy,as exemplified by Ulubelu in Lampung and Sarulla in North Sumatra.However,environmental factors in the Barisan Mountains remain a primary obstacle to the exploration and exploitation of geothermal energy.The back-arc basins of Sumatra exhibit the highest heat flow worldwide;however,the heat source in this area remains a controversial issue.This study aims to investigate the origin of the high heat flow in the back-arc basins of Sumatra(North,Central,and South Sumatra basins)based on geothermal data from 384 oil wells and the current literature for geological evaluation.The findings of this study indicate that the back-arc basins of Sumatra experienced severe extensional deformation during the Tertiary Period through a large pull-apart and slab rollback mechanism.This deformation resulted in the thinning of the continental crust in this region(27-32 km)and the formation of multiple normal faults.Consequently,the presence of magma resulting from mantle upwelling implies a high heat flow in the back-arc basins of Sumatra.This condition ranks the back-arc basins of Sumatra among the highest heat flow regions of the world,with heat flows>100 mW/m^(2).These findings indicate that the back-arc basins of Sumatra have significant opportunities to exploit their geothermal energy potential.This study provides novel insights into the potential of geothermal energy,particularly in the back-arc basins of Sumatra.

Formation mechanisms and resource potential of carbonate geothermal reservoirs in the Beijing-Tianjin-Hebei plain

Investigating the formation mechanisms of carbonate geothermal reservoirs is of theoretical and practical significance for summarizing the formation pattern of geothermal resources and further guiding their effective exploitation.The Beijing-Tianjin-Hebei Plain(BTHP),predominantly located within the Jizhong Depression and Cangxian Uplift in the Bohai Bay Basin,serves as the primary region for geothermal exploitation and utilization in China.More than 1500 geothermal wells have been drilled therein,with water temperature at the wellhead ranging from 55 to 110°C,single-well flow rate ranging between 80 and 120 m^(3)/h,and cumulative heating area exceeding 100×10^(6)m^(3).However,the exploration and research in the region remain limited overall.As per the previous geothermal and petroleum exploration results and the latest geothermal drilling data,this study comprehensively evaluated the geothermal resources of karst geothermal reservoirs.The results show that two suites of carbonate karst reservoirs,namely the Jxw Formation and the Ordovician strata,have primarily developed in the BTHP,and their formation and evolution can be divided into four stages:the Mesoproterozoic-Early Paleozoic stage with carbonate sedimentation and the development of interlayer karst,the Late Paleozoic stage with the development of direct sedimentary cover,the Mesozoic stage with compressional uplifting and development of buried hill karst,and the Cenozoic stage with regional cover deposition and the modification and finalization of karst geothermal reservoirs.Accordingly,the porosity evolution history of the geothermal reservoirs is composed of three stages,namely a significant decrease followed by a minor increase,a gradual decline,and then a small fluctuation from increase to decrease before slowly rising again.The karstification in geothermal reservoirs can be summarized into quasi-syngenetic karstification,epigenetic karstification,and burial karstification,which can be subdivided into seven subcategories.The carbonate geothermal reservoirs in the study area boast total geothermal resources of 53.821×10^(9)GJ,or 184.155×10^(9)t of standard coal equivalent(tce),and the annual exploitable geothermal resources in the urban area can heat an area of(400‒500)×10^(6)m^(3),indicating great potential of geothermal exploitation.

A state-of-the-art review on geothermal energy exploration in Morocco: Current status and prospects

In the last few decades, addressing the global challenge of implementation of strategies for renewable energy and energy efficiency has become crucial.Morocco, since 2009, has made a steadfast commitment to sustainability, with a particular focus on advancing the development of renewable energy resources. A comprehensive strategy has been formulated, centering on utilizing the country's energy potential to drive progress in this vital sector. Morocco is considered a country with abundant thermal water, indicating deep reservoirs with significant hydrothermal potential. Geothermal zones were selected based on the abundance of hot springs where water temperatures were high and geothermal gradients were significant. The abundance and importance of hot springs, combined with recent volcanism and ongoing non-tectonic activity linked to alpine orogeny, strongly suggest that these regions are promising reservoirs for geothermal energy. This great potential also extends to neighboring countries. In northeast and south Morocco, the temperature of thermal water ranges from 26 to 54℃. This study serves as an inclusive review of the geothermal potentialities in Morocco.