To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The out...To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The output voltage of multi-channel equivalent circuit is converted by analog-to-digital converter (ADC). Then the validity of the converted signal is judged by field programmable gate array (FPGA). Finally,it is transmitted the host computer through Gigabit Ethernet for waveform displaying. Compared with the traditional equivalent equipment of IED,the designed system here can not only test the validity of the pulse signal and normal operation of equivalent circuit,but also realize fast and reliable analysis of pulse signal by means of Gigabit Ethernet. It solves the problems of low speed and lag of response of traditional equivalent equipment.展开更多
Types of hybrid architectures survivor memory unit (SMU) is presented,which are applicable to IEEE 802.3 ab 1000 Base-T Gigabit Ethernet (GbE) transceiver. Area, power and decoder latency were taken into account and m...Types of hybrid architectures survivor memory unit (SMU) is presented,which are applicable to IEEE 802.3 ab 1000 Base-T Gigabit Ethernet (GbE) transceiver. Area, power and decoder latency were taken into account and most efficient architectures were compared to optimize area/power tradeoff in different kinds of applications. Suitable SMU architectures are given out respectively in area-restrict, power-restrict and latency-restrict designs. A power-efficient architecture was selected in our GbE project. It provides 48% improvement in area and 71% amelioration in power, compared to classical register exchange architecture (REA) SMU.展开更多
Systems containing multiple graphics-processing-unit(GPU)clusters are difficult to use for real-time electroholography when using only a single spatial light modulator because the transfer of the computer-generated ho...Systems containing multiple graphics-processing-unit(GPU)clusters are difficult to use for real-time electroholography when using only a single spatial light modulator because the transfer of the computer-generated hologram data between the GPUs is bottlenecked.To overcome this bottleneck,we propose a rapid GPU packing scheme that significantly reduces the volume of the required data transfer.The proposed method uses a multi-GPU cluster system connected with a cost-effective gigabit Ethernet network.In tests,we achieved real-time electroholography of a three-dimensional(3D)video presenting a point-cloud 3D object made up of approximately 200,000 points.展开更多
A zero-pole cancellation transimpedance amplifier（TIA）has been realized in 0.35μm RF CMOS technology for Gigabit Ethernet applications.The TIA exploits a zero-pole cancellation configuration to isolate the input pa...A zero-pole cancellation transimpedance amplifier（TIA）has been realized in 0.35μm RF CMOS technology for Gigabit Ethernet applications.The TIA exploits a zero-pole cancellation configuration to isolate the input parasitic capacitance including photodiode capacitance from bandwidth deterioration.Simulation results show that the proposed TIA has a bandwidth of 1.9 GHz and a transimpedance gain of 65 dB·Ωfor 1.5 pF photodiode capaci- tance,with a gain-bandwidth product of 3.4 THz·Ω.Even with 2 pF photodiode capacitance,the bandwidth exhibits a decline of only 300 MHz,confirming the mechanism of the zero-pole cancellation configuration.The input resis- tance is 50Ω,and the average input noise current spectral density is 9.7 pA/√ Hz.Testing results shows that the eye diagram at 1 Gb/s is wide open.The chip dissipates 17 mW under a single 3.3 V supply.展开更多
In this paper, a novel reconfiguration technique is developed in the context of a fault-tolerant Networked Control System (NCS) in two train wagons. All sensors, controllers and actuators in both wagons are connected ...In this paper, a novel reconfiguration technique is developed in the context of a fault-tolerant Networked Control System (NCS) in two train wagons. All sensors, controllers and actuators in both wagons are connected on top of a single Gigabit Ethernet network. The network also carries wired and wireless entertainment loads. A Markov model is used to prove that this reconfiguration technique reduces the effect of a failure in the error detection and switching mechanisms on the reliability of the control function. All calculations are based on closed-form solutions and verified using the SHARPE software package.展开更多
文摘To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The output voltage of multi-channel equivalent circuit is converted by analog-to-digital converter (ADC). Then the validity of the converted signal is judged by field programmable gate array (FPGA). Finally,it is transmitted the host computer through Gigabit Ethernet for waveform displaying. Compared with the traditional equivalent equipment of IED,the designed system here can not only test the validity of the pulse signal and normal operation of equivalent circuit,but also realize fast and reliable analysis of pulse signal by means of Gigabit Ethernet. It solves the problems of low speed and lag of response of traditional equivalent equipment.
基金National Science Fund for Creative ResearchGroups (No.60521002)Shanghai NaturalScience Foundation(No.037062022)
文摘Types of hybrid architectures survivor memory unit (SMU) is presented,which are applicable to IEEE 802.3 ab 1000 Base-T Gigabit Ethernet (GbE) transceiver. Area, power and decoder latency were taken into account and most efficient architectures were compared to optimize area/power tradeoff in different kinds of applications. Suitable SMU architectures are given out respectively in area-restrict, power-restrict and latency-restrict designs. A power-efficient architecture was selected in our GbE project. It provides 48% improvement in area and 71% amelioration in power, compared to classical register exchange architecture (REA) SMU.
基金supported by the Japan Society for the Promotion of Science(JSPS)KAKENHI(Nos.18K11399 and 19H01097)the Telecommunications Advancement Foundation.
文摘Systems containing multiple graphics-processing-unit(GPU)clusters are difficult to use for real-time electroholography when using only a single spatial light modulator because the transfer of the computer-generated hologram data between the GPUs is bottlenecked.To overcome this bottleneck,we propose a rapid GPU packing scheme that significantly reduces the volume of the required data transfer.The proposed method uses a multi-GPU cluster system connected with a cost-effective gigabit Ethernet network.In tests,we achieved real-time electroholography of a three-dimensional(3D)video presenting a point-cloud 3D object made up of approximately 200,000 points.
基金supported by the National Natural Science Foundation of China(Nos.60536030,60502005)the National High Technology Research and Development Program of China(Nos.2007AA01Z2A5,2006AA01Z239,2007AA03Z454)
文摘A zero-pole cancellation transimpedance amplifier（TIA）has been realized in 0.35μm RF CMOS technology for Gigabit Ethernet applications.The TIA exploits a zero-pole cancellation configuration to isolate the input parasitic capacitance including photodiode capacitance from bandwidth deterioration.Simulation results show that the proposed TIA has a bandwidth of 1.9 GHz and a transimpedance gain of 65 dB·Ωfor 1.5 pF photodiode capaci- tance,with a gain-bandwidth product of 3.4 THz·Ω.Even with 2 pF photodiode capacitance,the bandwidth exhibits a decline of only 300 MHz,confirming the mechanism of the zero-pole cancellation configuration.The input resis- tance is 50Ω,and the average input noise current spectral density is 9.7 pA/√ Hz.Testing results shows that the eye diagram at 1 Gb/s is wide open.The chip dissipates 17 mW under a single 3.3 V supply.
文摘In this paper, a novel reconfiguration technique is developed in the context of a fault-tolerant Networked Control System (NCS) in two train wagons. All sensors, controllers and actuators in both wagons are connected on top of a single Gigabit Ethernet network. The network also carries wired and wireless entertainment loads. A Markov model is used to prove that this reconfiguration technique reduces the effect of a failure in the error detection and switching mechanisms on the reliability of the control function. All calculations are based on closed-form solutions and verified using the SHARPE software package.
