The crystal growth and nucleation in glasses in the lithium silicate system have been investigated. Phase separation in ultimately homogenized glasses of the lithium silicate system xLi<sub>2</sub>O·(...The crystal growth and nucleation in glasses in the lithium silicate system have been investigated. Phase separation in ultimately homogenized glasses of the lithium silicate system xLi<sub>2</sub>O·(100 ﹣ x)SiO<sub>2</sub> (where x = 23.4, 26.0, 29.1, and 33.5 mol% Li<sub>2</sub>O) has been studied. The glasses of these compositions have been homogenized using the previously established special temperature-time conditions, which make it possible to provide a maximum dehydration and removal of bubbles from the glass melt. The parameters of nucleation and growth of phase separated in homogeneities and homogeneous crystal nucleation have been determined. The absolute values of the stationary nucleation rates I<sub>st</sub> of lithium disilicate crystals in the 23.4Li<sub>2</sub>O·76.6SiO<sub>2</sub>, 26Li<sub>2</sub>O·74SiO<sub>2</sub> and 29.1Li<sub>2</sub>O·70.9SiO<sub>2</sub> glasses with the compositions lying in the metastable phase separation region have been compared with the corresponding rates I<sub>st</sub> for the glass of the stoichiometric lithium disilicate composition 33.51Li<sub>2</sub>O·66.5SiO<sub>2</sub>. It has been found that the crystal growth rate has a tendency toward a monotonic increase with an increase in the temperature, whereas the dependences of the crystal growth rate on the time of low temperature heat treatment exhibit an oscillatory behavior with a monotonic decrease in the absolute value of oscillations. The character of crystallization in glasses with the compositions lying in the phase separation region of the Li<sub>2</sub>O-SiO<sub>2</sub> system is compared with that in the glass of the stoichiometric lithium disilicate composition. The conclusion has been made that the phase separation weakly affects the nucleation parameters of the lithium disilicate and has a strong effect on the crystal growth.展开更多
The nanocrystallization behaviour of a bulk Zr-based metallic glass subjected to compressive stress is investigated in the supercooled liquid region. Compared with annealing treatments without compressive stress, comp...The nanocrystallization behaviour of a bulk Zr-based metallic glass subjected to compressive stress is investigated in the supercooled liquid region. Compared with annealing treatments without compressive stress, compressive deformation promotes the development of nucleation and suppresses the coarsening of nanocrystallites at high temperatures.展开更多
In this paper, poly(butylene-terephthalate)-layered silicate of clay nanocomposites (NPBT) are reported. Their thermal properties, heat distortion temperature (HDT) and crystallization nucleation are investigated. NPB...In this paper, poly(butylene-terephthalate)-layered silicate of clay nanocomposites (NPBT) are reported. Their thermal properties, heat distortion temperature (HDT) and crystallization nucleation are investigated. NPBT samples have apparent viscosity over 0.85, HDT of 30℃ to 50℃ higher than that of poly (butylene-terephthalate) (PBT) for clay load from 1.0% to 10.0% (by mass), and higher capability to accommodate clay than other polymers. The nonisothermal crystallization experiments indicate that the better thermal degradation behavior and crystallization rate of NPBT are 50% higher than PBT, and its injection mould processing temperature is lowered from 110℃ to 55℃. NPBT samples are characterized by several techniques. X-ray shows an original clay interlayer distance enlarged from 1.0 nm to 2.5 nm, while both TBM and AFM indicate an average size from 30nm to lOOnm of exfoliated clay layers, and 3%(by mass) of particle agglomeration being phase separated from PBT matrix, which are factors on some mechanical properties decrease of NPBT. The disappearance of spherulitic morphology in NPBT resulted from layers nucleation is detected. Improving NPBT properties by treating clay with long chain organic reagent and controlling the way to load it is suggested.展开更多
Phase separation and crystallization behaviors of fluormica glass-ceramic with the nualeation agent of TiO2 were investigated by means of XRD,SEM,DTA and EDX.The results indieate that,during the heat treatment process...Phase separation and crystallization behaviors of fluormica glass-ceramic with the nualeation agent of TiO2 were investigated by means of XRD,SEM,DTA and EDX.The results indieate that,during the heat treatment process,phase separation oceurred,i. c, adroplet phase rich in titanium appeared in the continual matrix glass.In the droplet phase , magnesium titanate crystals initially precipitated.Basing on these initial titanate erystals,flucrophlogopitc nuelei formed and grew.Thus a kind of fluormica glass-ceramic was prepared.展开更多
文摘The crystal growth and nucleation in glasses in the lithium silicate system have been investigated. Phase separation in ultimately homogenized glasses of the lithium silicate system xLi<sub>2</sub>O·(100 ﹣ x)SiO<sub>2</sub> (where x = 23.4, 26.0, 29.1, and 33.5 mol% Li<sub>2</sub>O) has been studied. The glasses of these compositions have been homogenized using the previously established special temperature-time conditions, which make it possible to provide a maximum dehydration and removal of bubbles from the glass melt. The parameters of nucleation and growth of phase separated in homogeneities and homogeneous crystal nucleation have been determined. The absolute values of the stationary nucleation rates I<sub>st</sub> of lithium disilicate crystals in the 23.4Li<sub>2</sub>O·76.6SiO<sub>2</sub>, 26Li<sub>2</sub>O·74SiO<sub>2</sub> and 29.1Li<sub>2</sub>O·70.9SiO<sub>2</sub> glasses with the compositions lying in the metastable phase separation region have been compared with the corresponding rates I<sub>st</sub> for the glass of the stoichiometric lithium disilicate composition 33.51Li<sub>2</sub>O·66.5SiO<sub>2</sub>. It has been found that the crystal growth rate has a tendency toward a monotonic increase with an increase in the temperature, whereas the dependences of the crystal growth rate on the time of low temperature heat treatment exhibit an oscillatory behavior with a monotonic decrease in the absolute value of oscillations. The character of crystallization in glasses with the compositions lying in the phase separation region of the Li<sub>2</sub>O-SiO<sub>2</sub> system is compared with that in the glass of the stoichiometric lithium disilicate composition. The conclusion has been made that the phase separation weakly affects the nucleation parameters of the lithium disilicate and has a strong effect on the crystal growth.
基金Supported by the Science Foundation for Excellent Young Scholars of Heilongjiang Province under Grant No JC-05-11, the Program for New Century Excellent Talents in University of China under Grant No NCET-04-0322, and the Specialized Research Fund for the Doctoral Programme of Higher Education of China under Grant No 20040213049）
文摘The nanocrystallization behaviour of a bulk Zr-based metallic glass subjected to compressive stress is investigated in the supercooled liquid region. Compared with annealing treatments without compressive stress, compressive deformation promotes the development of nucleation and suppresses the coarsening of nanocrystallites at high temperatures.
基金Supported by China National Petroleum Corporation Innovation Foundation(No.J02060)and Subsidized by Special Funds for Major State Basic Research Projects(No.G1999064800)
文摘In this paper, poly(butylene-terephthalate)-layered silicate of clay nanocomposites (NPBT) are reported. Their thermal properties, heat distortion temperature (HDT) and crystallization nucleation are investigated. NPBT samples have apparent viscosity over 0.85, HDT of 30℃ to 50℃ higher than that of poly (butylene-terephthalate) (PBT) for clay load from 1.0% to 10.0% (by mass), and higher capability to accommodate clay than other polymers. The nonisothermal crystallization experiments indicate that the better thermal degradation behavior and crystallization rate of NPBT are 50% higher than PBT, and its injection mould processing temperature is lowered from 110℃ to 55℃. NPBT samples are characterized by several techniques. X-ray shows an original clay interlayer distance enlarged from 1.0 nm to 2.5 nm, while both TBM and AFM indicate an average size from 30nm to lOOnm of exfoliated clay layers, and 3%(by mass) of particle agglomeration being phase separated from PBT matrix, which are factors on some mechanical properties decrease of NPBT. The disappearance of spherulitic morphology in NPBT resulted from layers nucleation is detected. Improving NPBT properties by treating clay with long chain organic reagent and controlling the way to load it is suggested.
文摘Phase separation and crystallization behaviors of fluormica glass-ceramic with the nualeation agent of TiO2 were investigated by means of XRD,SEM,DTA and EDX.The results indieate that,during the heat treatment process,phase separation oceurred,i. c, adroplet phase rich in titanium appeared in the continual matrix glass.In the droplet phase , magnesium titanate crystals initially precipitated.Basing on these initial titanate erystals,flucrophlogopitc nuelei formed and grew.Thus a kind of fluormica glass-ceramic was prepared.
