Mutual effects between a gliding arc discharge and a premixed flame

Mutual effects between a gliding arc(GA)discharge at atmospheric pressure and a premixed CH_(4)/air flame were experimentally investigated.Effects of the flame on the GA were studied using simultaneous measurements of the current,the voltage,and the instantaneous images of the plasma columns.The GA in the flame has a thicker and more diffusive plasma column,and it is more frequently ignited at a smaller breakdown voltage than that in the air.The GA extension velocity and the gliding velocity in the flame are larger than those in the air.The electrode voltage drop of the GA discharge in the flame is about 160 V,whereas that in the air is about 220 V.Compared with the GA in the air,the different features of the GA in the flame can be explained by high-temperature,weakly ionized,and species-abundant environment that are generated by the premixed CH_(4)/air flame.Effects of the gliding arc discharge on the premixed flames were demonstrated using planar laser-induced fluorescence of hydroxyl radicals(OH)and formaldehyde(CH_(2)O).OH and CH_(2)O can be formed in the CH_(4)/air mixture in the presence of the GA due to kinetic effects,and the increase of OH and CH_(2)O shows the great potential of the GA for combustion enhancement.

Plasma nitrogen fixation system with dual-loop enhancement for improved energy efficiency and its efficacy for lettuce cultivation

Plasma nitrogen fixation(PNF)has been emerging as a promising technology for greenhouse gasfree and renewable energy-based agriculture.Yet,most PNF studies seldom address practical application-specific issues.In this work,we present the development of a compact and automatic PNF system for on-site agricultural applications.The system utilized a gliding-arc discharge as the plasma source and employed a dual-loop design to generate NO_(x)from air and water under atmospheric conditions.Experimental results showed that the system with a dualloop design performs well in terms of energy costs and production rates.Optimal operational parameters for the system were determined through experimentation,resulting in an energy cost of 13.9 MJ mol^(-1)and an energy efficiency of 16 g kWh^(-1)for NO_(3)^(-)production,respectively.Moreover,the concentration of exhausted NO_(x)was below the emission standards.Soilless lettuce cultivation experiments demonstrated that NO_(x)^(-)produced by the PNF system could serve as liquid nitrate nitrogen fertilizer.Overall,our work demonstrates the potential of the developed PNF system for on-site application in the production of green-leaf vegetables.

Accurately tracking hypersonic gliding vehicles via an LEO mega-constellation in relay tracking mode

In order to effectively defend against the threats of the hypersonic gliding vehicles(HGVs),HGVs should be tracked as early as possible,which is beyond the capability of the ground-based radars.Being benefited by the developing megaconstellations in low-Earth orbit,this paper proposes a relay tracking mode to track HGVs to overcome the above problem.The whole tracking mission is composed of several tracking intervals with the same duration.Within each tracking interval,several appropriate satellites are dispatched to track the HGV.Satellites that are planned to take part in the tracking mission are selected by a new derived observability criterion.The tracking performances of the proposed tracking mode and the other two traditional tracking modes,including the stare and track-rate modes,are compared by simulation.The results show that the relay tracking mode can track the whole trajectory of a HGV,while the stare mode can only provide a very short tracking arc.Moreover,the relay tracking mode achieve higher tracking accuracy with fewer attitude controls than the track-rate mode.

Discharge and mass transfer characteristics of atmospheric pressure gas-solid two-phase gliding arc

In this work,a gas-solid two-phase gliding arc discharge(GS-GAD)reactor was built.Gliding arc was formed in the gap between the blade electrodes,and solid powder was deposited on the sieve plate positioned beneath the blade electrodes.A range of experimental parameters,including the inter-electrode spacing,gas flow rate,applied voltage,and the type of the powder,were systematically varied to elucidate the influence of solid powder matter on the dynamics of gliding arc discharge(GAD).The discharge images were captured by ICCD and digital camera to investigate the mass transfer characteristics of GS-GAD,and the electrical parameters,such as the effective values of voltage,current,and discharge power were record to reveal the discharge characteristics of GS-GAD.The results demonstrate that powder undergoes spontaneous movement towards the upper region of the gliding arc due to the influence of electric field force.Increasing the discharge voltage,decreasing relative dielectric constant of the powder and reducing the electrode-to-sieve-plate distance all contribute to a greater involvement of powder in the GAD process,subsequently resulting in an enhanced powder concentration within the GAD region.Additionally,powder located beneath the gliding arc experiences downward resistance caused by the opposing gas flow and arc.Excessive gas flow rate notably hampers the powder concentration within the discharge region,and the velocity of powder motion in the upper part of the GAD region is reduced.Under the condition of electrode-to-sieve-plate distance of 30 mm,gas flow rate of 1.5 L/min,and peak-to-peak voltage of 31 kV,the best combination of arc gliding and powder spark discharge phenomena can be achieved with the addition of Al_(2)O_(3) powder.

Gliding arc discharge in combination with Cu/Cu_(2)O electrocatalysis for ammonia production

Highly efficient and green ammonia production is an important demand for modern agriculture.In this study,a two-step ammonia production method is developed using a gliding arc discharge in combination with Cu/Cu_(2)O electrocatalysis.In this method,NO_(x)is provided by the gliding arc discharge and then electrolyzed by Cu/Cu_(2)O after alkaline absorption.The electrical characteristics,the optical characteristics and the NO_(x)production are investigated in discharges at different input voltage and the gas flow.The dependence of ammonia production through Cu/Cu_(2)O electrocatalysis on pH value and reduction potential are determined by colorimetric method.In our study,two discharge modes are observed.At high input voltage and low gas flow,the discharge is operated with a stable plasma channel which is called the steady arc gliding discharge mode(A-G mode).As lowering input voltage and raising gas flow,the plasma channel is destroyed and high frequency breakdown occurs instead,which is known as the breakdown gliding discharge mode(B-G mode).The optimal NO_(x)production of 7.34 mmol h^(-1)is obtained in the transition stage of the two discharge modes.The ammonia yield reaches0.402 mmol h^(-1)cm^(-2)at pH value of 12.7 and reduction potential of-1.0 V versus reversible hydrogen electrode(RHE).

Effect of power supply parameters on discharge characteristics and sterilization efficiency of magnetically driven rotating gliding arc

Plasma sterilization is a new generation of high-tech sterilization method that is fast,safe,and pollution free.It is widely used in medical,food,and environmental protection fields.Home air sterilization is an emerging field of plasma application,which puts higher requirements on the miniaturization,operational stability,and operating cost of plasma device.In this study,a novel magnetically driven rotating gliding arc(MDRGA)discharge device was used to sterilize Lactobacillus fermentation.Compared with the traditional gas-driven gliding arc,this device has a simple structure and a more stable gliding arc.Simulation using COMSOL Multiphysics showed that adding permanent magnets can form a stable magnetic field,which is conducive to the formation of gliding arcs.Experiments on the discharge performance,ozone concentration,and sterilization effect were conducted using different power supply parameters.The results revealed that the MDRGA process can be divided into three stages:starting,gliding,and extinguishing.Appropriate voltage was the key factor for stable arc gliding,and both high and low voltages were not conducive to stable arc gliding and ozone production.In this experimental setup,the sterilization effect was the best at 6.6 kV.A high modulation duty ratio was beneficial for achieving stable arc gliding.However,when the duty ratio exceeded a certain value,the improvement in the sterilization effect was slow.Therefore,considering the sterilization effect and energy factors comprehensively,we chose 80%as the optimal modulation duty ratio for this experimental device.

Application of Gliding Scaffold System In Cable-Stayed Bridge Construction

Gonghe bridge is a double level cable-stayed concrete bridge with a single-cable-plane of single cable tower. Its span is 114+120 m and a whole length of 236 m. The gliding scaffold equipment is used for the first time in the long span cable-stayed bridge construction to reduce the construction time limit. In the process of construction, to make sure a safe connection among concrete objects with different ages, the single-supporting and single-suspension system is adopted before the concrete pouring. While the double-supporting and single-suspension system is applied after con- crete pouring. These construction systems with gliding scaffold equipment are first introduced in long span ca- ble-stayed bridge and presented in detail[1]. The practice shows that these gliding scaffold systems have many advan- tages over the traditional ones.

Experimental study on the improvement of spray characteristics of aero-engines using gliding arc plasma

A gliding arc plasma fuel atomization actuator suitable for aeroengines was designed,and a gliding arc plasma fuel spray experimental platform was built to address the fuel atomization problem in aeroengine combustion chambers.The spray characteristics for different airflows,fuel flows,and discharge voltages were analyzed using laser particle size analysis.The research shows that the fuel atomization effect is improved from the increased airflow.The decreased fuel flow not only reduces the injection pressure of the fuel but also changes the discharge mode of the gliding arc,which affects reductions in the discharge power and inhibits fuel atomization.Gliding arc discharges accelerate the breaking,atomization,and evaporation of fuel droplets while reducing the particle size,which increases the proportion of small droplets.Compared with the working conditions of plasma-assisted atomization without the gliding arc,the D0.5,D0.9,and average particle size of the fuel droplets are reduced by 4.7%,6.5%,and 4.1%,respectively,when the modulation voltage of the gliding arc power supply is 200 V.

Simultaneous guidance of electromagnetic and elastic waves via glide symmetry phoxonic crystal waveguides

A phoxonic crystal waveguide with the glide symmetry is designed,in which both electromagnetic and elastic waves can propagate along the glide plane at the same time.Due to the glide symmetry,the bands of the phoxonic crystal super-cell degenerate in pairs at the boundary of the Brillouin zone.This is the so-called band-sticking effect and it causes the appearance of gapless guided-modes.By adjusting the magnitude of the glide dislocation the edge bandgaps,the bandgap of the guided-modes at the boundary of the Brillouin zone,can be further adjusted.The photonic and phononic guided-modes can then possess only one mode for a certain frequency with relatively low group velocities,achieving single-mode guided-bands with relatively flat dispersion relationship.In addition,there exists acousto-optic interaction in the cavity constructed by the glide plane.The proposed waveguide has potential applications in the design of novel optomechanical devices.

Forecast of Geological Gas Hazards for “Three-Soft” Coal Seams in Gliding Structural Areas

Gas outbursts from "three-soft" coal seams (soft roof,soft floor and soft coal) constitute a very serious prob-lem in the Ludian gliding structure area in western Henan. By means of theories and methods of gas geology,structural geology,coal petrology and rock tests,we have discussed the effect of control of several physical properties of soft roof on gas preservation and proposed a new method of forecasting gas geological hazards under open structural conditions. The result shows that the areas with type Ⅲ or Ⅳ soft roofs are the most dangerous areas where gas outburst most likely can take place. Therefore,countermeasures should be taken in these areas to prevent gas outbursts.

Destruction of PCDD/Fs by gliding arc discharges

PCDD/Fs have been become a serious issue because of their toxicological effects and associated adverse health implications. In this study, the gliding arc plasma was tested for treatment of polychlorinated dibenzo-p-dioxins （PCDDs） and polychlorinated dibenzofurans （PCDFs）, which was synthesized from pentachlorophenol in atmospheric condition at 350℃ with or without the catalysis of CuCl2. From the experiment, we found that the destruction efficiency of PCDD/F homologues after gliding was discharge ranged from 25% to 79%. This result demonstrates that gliding arc plasma is an effective technology to decompose PCDDs/Fs in flue gas. A plausible degradation mechanism for PCDD/Fs by gliding arc was discussed. Finally, a multistage reactor structure of gliding arc was proposed to upgrade removal efficiency for PCDD/Fs.

Conversion of Methane to C_2 Hydrocarbons and Hydrogen Using a Gliding Arc Reactor

Methane conversion has been studied using gliding arc plasma in the presence of argon.The process was conducted at atmospheric pressure and ambient temperature.The focus of this research was to develop a process of converting methane to C2 hydrocarbons and hydrogen. The main parameters,including the CH4/Ar mole ratio,the CH4 flow rate,the input voltage,and the minimum electrode gap,were varied to investigate their effects on methane conversion rate, product distribution,energy consumption,carbon deposit,and reaction stability.The specific energy requirement（SER） was used to express the energy utilization efficiency of the process and provided a practical guidance for optimizing reaction conditions for improving energy efficiency. It was found that the carbon deposition was not conducive to methane conversion,and the gliding arc plasma discharge reached a stable state twelve minutes later.Optimum conditions for methane conversion were suggested.The maximum methane conversion rate of 43.39%was obtained under the optimum conditions.Also,C2 hydrocarbons selectivity,C2 hydrocarbons yield,H2 selectivity, H2 yield and SER were 87.20%,37.83%,81.28%,35.27%,and 2.09 MJ/mol,respectively.

Atmospheric pressure gliding arc discharge plasma treatments for improving germination, growth and yield of wheat

Wheat （Triticum aestivum） seeds were treated with atmospheric pressure gliding arc discharge plasmas to investigate the effects on water absorption, seed germination rate, seedling growth and yield in wheat. The surface architectures and functionalities of the seeds were found to modify due to plasma treatments. 6 rain treatment was provided 95%-100% germination rate. For the treatment duration of 3 and 9 rain the growth activity, dry matter accumulation, leaves chlorophyll contents, longest spikes, number of spikes/spikelet and total soluble protein content in shoots were improved. The grain yield of wheat was increased ,--20% by 6 min treatment with H2O/O2 plasma with respect to control.

Influence of Zeotropic Mixtures' Temperature Gliding on the Performance of Heat Transfer in Condenser or Evaporator

Many zeotropic refrigerant mixtures are proposed as alternatives to some chlorofluorocar-bons (CFCs) and hydrochlorofluorocarbons ( HCFCs). An advantage of zeotropic mixtures is the possibility of reduction in entropy generation by matching the temperature glidings of refrigerant and heat-transfer fluid in both condenser and evaporator. Zeotropic mixtures are compared with pure re-frigerants to evaluate their exergetic losses. On the other hand, the special phenomena which result from temperature gliding are proved by experiments. A simple equation is obtained, to evaluate dif-ferent zeotropic mixtures' exergetic losses. The maximum flow rate of heat-transfer fluids is found in order that refrigerants phase change can be completed. Lastly, some examples of zeotropic mix-tures ( R407C, R405A and R414B) are given, and their exergetic losses and maximum flow rate of heat-transfer fluids in condenser are forecasted.

Characteristics of Atmospheric Pressure Rotating Gliding Arc Plasmas

In this work, a novel direct current （DC） atmospheric pressure rotating gliding arc （RGA） plasma reactor has been developed for plasma-assisted chemical reactions. The influence of the gas composition and the gas flow rate on the arc dynamic behaviour and the formation of reactive species in the N2 and air gliding arc plasmas has been investigated by means of electrical signals, high speed photography, and optical emission spectroscopic diagnostics. Compared to conventional gliding arc reactors with knife-shaped electrodes which generally require a high flow rate （e.g., 10-20 L/min） to maintain a long arc length and reasonable plasma discharge zone, in this RGA system, a lower gas flow rate （e.g., 2 L/min） can also generate a larger effective plasma reaction zone with a longer arc length for chemical reactions. Two different motion patterns can be clearly observed in the N2 and air RGA plasmas. The time-resolved arc voltage signals show that three different arc dynamic modes, the arc restrike mode, takeover mode, and combined modes, can be clearly identified in the RGA plasmas. The occurrence of different motion and arc dynamic modes is strongly dependent on the composition of the working gas and gas flow rate.

Kinetic Modeling of Plasma Methane Conversion Using Gliding Arc

Plasma methane (CH_4) conversion in gliding arc discharge was examined. Theresult data of experiments regarding the performance of gliding arc discharge were presented in thispaper. A simulation which is consisted some chemical kinetic mechanisms has been provided toanalyze and describe the plasma process. The effect of total gas flow rate and input frequencyrefers to power consumption have been studied to evaluate the performance of gliding arc plasmasystem and the reaction mechanism of decomposition. Experiment results indicated that the maximumconversion of CH_4 reached 50% at the total gas flow rate of 1 L/min. The plasma reaction wasoccurred at the atmospheric pressure and the main products were C (solid), hydrogen, and acetylene(C_2H_2). The plasma reaction of methane conversion was exothermic reaction which increased theproduct stream temperature around 30-50℃.

Discussion on the Non-Equilibrium Phase of the Gliding Arc Plasma Driven by the Transverse Magnetic Field

a gliding arc driven by the transverse magnetic field was ignited between the electrodes with a complicated shape at atmospheric pressure and a non-equilibrium plasma was gencrated. Under our experimental conditions, a phenomenon was clearly observed where the arc power decreased with the increase in arc voltage. As the arc voltage was higher than 3.375 kV, the are power acquired from the power supply decreased, and the arc plasma began to switch to a non-equilibrium phase. The existence of the non-equilibrium arc plasma was very short, about 10 ms in one gliding arc discharge cycle.

Characteristics of Gliding Arc Discharge Plasma

A gliding arc discharge plasma and its characteristics are described. Analysis of the production principle of the plasma is presented. Some experimental results about two novel types of the gliding arc plasma generator have been obtained. These types of gliding arc plasma axe potentially usable in the chemical industry and environmental engineering.

Decomposition of CCl_4 and CHCl_3 on gliding arc plasma

Decomposition of chlorinated hydrocarbons, CCl4 and CHCl3, in gliding plasma was examined. The effects of initial concentrations, total gas flow rates, and power consumption have been investigated. The conversion result was relatively high. It reached 80% for CCl4 and 97% for CHCl3. Using atmospheric air as the carrier gas, the plasma reaction occurred at exothermic reaction and the main products were CO2, CO, and Cl2. Transformation into CCl4 was also detected for CHCl3 decomposition reaction. The conversion of CCh and CHCl3 were increased with the increasing applied frequency and decreasing total gas flow rate.

Development and Control of Underwater Gliding Robots:A Review

As one of the most effective vehicles for ocean development and exploration,underwater gliding robots(UGRs)have the unique characteristics of low energy consumption and strong endurance.Moreover,by borrowing the motion principles of current underwater robots,a variety of novel UGRs have emerged with improving their maneuverability,concealment,and environmental friendliness,which significantly broadens the ocean applications.In this paper,we provide a comprehensive review of underwater gliding robots,including prototype design and their key technologies.From the perspective of motion characteristics,we categorize the underwater gliding robots in terms of traditional underwater gliders(UGs),hybrid-driven UGs,bio-inspired UGs,thermal UGs,and others.Correspondingly,their buoyancy driven system,dynamic and energy model,and motion control are concluded with detailed analysis.Finally,we have discussed the current critical issues and future development.This review offers valuable insight into the development of next-generation underwater robots well-suited for various oceanic applications,and aims to gain more attention of researchers and engineers to this growing field.