Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was...Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was prepared by alkaline pretreatment and bleaching treat-ment of paulownia wood followed by impregnation of epoxy resin and ethylene glycol diglycidyl ether(EDGE).The eff ect of delignifi cation degree on the optical and mechani-cal properties of FTW was studied,and the infl uence of the epoxy/EDGE ratio on the fl exibility and mechanical proper-ties of FTW was also investigated.The results showed that higher delignifi cation degree resulted in higher transmit-tance of FTW.More EDGE addition led to better fl exibility of FTW,while overmuch addition of EDGE will reduce the mechanical properties.The optimal FTW sample resulted in a high transmittance of 89%and an ultrahigh haze value of 97%with outstanding fl exibility and excellent mechanical properties.The investigation of FTW broadens the research fi eld of transparent wood,and provides great possibility for its application in fl exible wearable devices and fl exible materials.展开更多
A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylam...A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.展开更多
基金funded by the National Natural Science Foundation of China(31760183)the Natural Science Foundation of Guangxi(2016GXNSFCA380025)+1 种基金the Project Funded by China Postdoctoral Science Foundation(2017M620361)the Scientifi c Research Foundation of Guangxi University(XGZ150513).
文摘Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was prepared by alkaline pretreatment and bleaching treat-ment of paulownia wood followed by impregnation of epoxy resin and ethylene glycol diglycidyl ether(EDGE).The eff ect of delignifi cation degree on the optical and mechani-cal properties of FTW was studied,and the infl uence of the epoxy/EDGE ratio on the fl exibility and mechanical proper-ties of FTW was also investigated.The results showed that higher delignifi cation degree resulted in higher transmit-tance of FTW.More EDGE addition led to better fl exibility of FTW,while overmuch addition of EDGE will reduce the mechanical properties.The optimal FTW sample resulted in a high transmittance of 89%and an ultrahigh haze value of 97%with outstanding fl exibility and excellent mechanical properties.The investigation of FTW broadens the research fi eld of transparent wood,and provides great possibility for its application in fl exible wearable devices and fl exible materials.
基金supported by the National High-Technology Research and Development Program of China (Grant No.2002AA6Z3083)
文摘A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.
