Urea-isobutyraldehyde-formaldehyde (UIF) resin was synthesized from urea, isobutyraldehyde, and formaldehyde using sulfuric acid as a catalyst by one pot method. The effects of molar ratios of isobutyraldehyde to form...Urea-isobutyraldehyde-formaldehyde (UIF) resin was synthesized from urea, isobutyraldehyde, and formaldehyde using sulfuric acid as a catalyst by one pot method. The effects of molar ratios of isobutyraldehyde to formaldehyde (n(I)/n(F)) and aldehyde to urea (n(A)/n(U)) on the yield, hydroxyl value (vs KOH) and softening point of the resin were investigated. The structure of the resin was characterized by FT-IR, 1H-NMR and 13C-NMR. The results show that when the molar ratio of urea to isobutyraldehyde to formaldehyde (n(U)/n(I)/n(F)) is 1.0/3.0/3.0, the yield UIF resin is 67.1%, and the softening point and hydroxyl value are 88 ℃ and 37 mg/g, respectively. The FT-IR, 1H-NMR and 13C-NMR results show that the lactam is formed by aminomethylation from urea, isobutyraldehyde, and formaldehyde.展开更多
The reaction mechanism of glyoxal （G） with urea （U） under weak acid condition was theoretically investigated at PW91/DNP/COSMO of quantum chemistry using density functional theory （DFT） method. The results show ...The reaction mechanism of glyoxal （G） with urea （U） under weak acid condition was theoretically investigated at PW91/DNP/COSMO of quantum chemistry using density functional theory （DFT） method. The results show that the addition reaction of G with U under the conditions mainly involves the reactions of U with protonated glyoxal （p-G）, protonated 2,2-dihy- droxyacetaldehyde （p-G 1） and protonated bis-hemdiol （p-G2） to form two important carbocation reactive intermediates of C-p-UG and C-p-UG1, and two important hydroxyl compounds of UG and UG1. These compounds play important roles in the formation of UG resin. According to the result of quantum chemical calculation, UG resin was synthesized successfully under weak acid conditions. The UG resin was characterized by matrix assisted laser desorption ionization time of flight mass spectrometry （MALDI-TOF-MS）, ultraviolet and visible spectroscopy （UV-vis）, Fourier transform infrared spectroscopy （FT1R） and nuclear magnetic resonance spectroscopy （13CNMR and 1HNMR）. These instrumental analytical results agree with each other and further confirm the addition reaction pathway of glyoxal with urea proposed by quantum chemical calculation.展开更多
Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergo...Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergoes cross-linking reaction and the formation of three dimensional cross linked structures takes place and bonding of wood particles in a hot press [1]. UF powder resins show high reactivity and good performance in the production and by their low price;however they lack in water resistance of the hardened resin [2]. Urea-formaldehyde (UF) resins are the most important type of adhesive resins for the production of wood based panels but process-ability and curing behavior of urea formaldehyde resin depended on various factors related to resin properties, types of wood and their properties, amount & type of catalyst, types and amount of polymers addition and environmental conditions [3]. This factor decides the process-ability of UF resin based composite during manufacturing of plywood, particle board and fiberboard. In this review paper, various factors affecting gel time and process-ability of UF resin based wood composite are reviewed.展开更多
A new kind of reactive toughening accelerator for epoxy resin, amine-teminated hyperbranched polymer (H2O-NMe2) was synthesized and characterized by FT-IR spectroscopy. Dynamic mechanical analysis (DMA) was used to st...A new kind of reactive toughening accelerator for epoxy resin, amine-teminated hyperbranched polymer (H2O-NMe2) was synthesized and characterized by FT-IR spectroscopy. Dynamic mechanical analysis (DMA) was used to study the glass transition temperature (Tg), loss factor (tanδ) and activation energy (Ea) by using multiplexing frequency. The results show that the Ea at glassy relaxation process of modified system is about 70-80 kJ/mol higher than that of unmodified system, and the high modulus and good thermal properties are still maintained.展开更多
The selective water plugging agent was prepared by heating the blends of the polyacry-lamide inverse latex, modified urea formaldehyde resin, crosslinking agent and catalysts.The results show that using different type...The selective water plugging agent was prepared by heating the blends of the polyacry-lamide inverse latex, modified urea formaldehyde resin, crosslinking agent and catalysts.The results show that using different types of polymers and additives or changing in theirproportion of the blends, the gelling viscosity, starting point of gelling and other propertiesof the IPN can be controlled.展开更多
Urea-formaldehyde (UF) resin is widely used as an adhesive for the manufacture of a range of wood and fiber based products. Although the microstructure of this resin has been examined at high resolution by field-emiss...Urea-formaldehyde (UF) resin is widely used as an adhesive for the manufacture of a range of wood and fiber based products. Although the microstructure of this resin has been examined at high resolution by field-emission scanning electron microscopy and atomic force microscopy, transmission electron microscopy (TEM) has thus far not been used, perhaps because of difficulties in ultrathin sectioning this resin in cured (polymerized) state. In the technical note presented here, a novel sample preparation method is described which enabled us to examine the microstructural morphology of UF resin by transmission electron microscopy in ultrathin sections, revealing the presence of spherical particles within the resin. Our initial attempt to ultrathin section the resin directly was not successful as it was too brittle to trim blocks for sectioning. Then, we developed a sample preparation technique that involved impregnation ofPinus radiatawood tissues with the UF resin, and then embedding of resin impregnated wood tissues with Spurr’s low viscosity embedding medium, which has been widely employed in plant and wood ultrastructure work. The TEM images illustrated and the information on the microstructural morphology of the UF resin presented are based on this novel sample preparation approach.展开更多
基金Project(2006A10902001) supported by the Science and Technology Plan of Guangdong Province, ChinaProject(2007Z3-D0351) supported by the Science and Technology Plan of Guangzhou City, China
文摘Urea-isobutyraldehyde-formaldehyde (UIF) resin was synthesized from urea, isobutyraldehyde, and formaldehyde using sulfuric acid as a catalyst by one pot method. The effects of molar ratios of isobutyraldehyde to formaldehyde (n(I)/n(F)) and aldehyde to urea (n(A)/n(U)) on the yield, hydroxyl value (vs KOH) and softening point of the resin were investigated. The structure of the resin was characterized by FT-IR, 1H-NMR and 13C-NMR. The results show that when the molar ratio of urea to isobutyraldehyde to formaldehyde (n(U)/n(I)/n(F)) is 1.0/3.0/3.0, the yield UIF resin is 67.1%, and the softening point and hydroxyl value are 88 ℃ and 37 mg/g, respectively. The FT-IR, 1H-NMR and 13C-NMR results show that the lactam is formed by aminomethylation from urea, isobutyraldehyde, and formaldehyde.
基金Supported by the Key Program of the National Natural Science Foundation of China(No.30930074)National Natural Science Foundation of China(No.31260160)
文摘The reaction mechanism of glyoxal （G） with urea （U） under weak acid condition was theoretically investigated at PW91/DNP/COSMO of quantum chemistry using density functional theory （DFT） method. The results show that the addition reaction of G with U under the conditions mainly involves the reactions of U with protonated glyoxal （p-G）, protonated 2,2-dihy- droxyacetaldehyde （p-G 1） and protonated bis-hemdiol （p-G2） to form two important carbocation reactive intermediates of C-p-UG and C-p-UG1, and two important hydroxyl compounds of UG and UG1. These compounds play important roles in the formation of UG resin. According to the result of quantum chemical calculation, UG resin was synthesized successfully under weak acid conditions. The UG resin was characterized by matrix assisted laser desorption ionization time of flight mass spectrometry （MALDI-TOF-MS）, ultraviolet and visible spectroscopy （UV-vis）, Fourier transform infrared spectroscopy （FT1R） and nuclear magnetic resonance spectroscopy （13CNMR and 1HNMR）. These instrumental analytical results agree with each other and further confirm the addition reaction pathway of glyoxal with urea proposed by quantum chemical calculation.
文摘Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergoes cross-linking reaction and the formation of three dimensional cross linked structures takes place and bonding of wood particles in a hot press [1]. UF powder resins show high reactivity and good performance in the production and by their low price;however they lack in water resistance of the hardened resin [2]. Urea-formaldehyde (UF) resins are the most important type of adhesive resins for the production of wood based panels but process-ability and curing behavior of urea formaldehyde resin depended on various factors related to resin properties, types of wood and their properties, amount & type of catalyst, types and amount of polymers addition and environmental conditions [3]. This factor decides the process-ability of UF resin based composite during manufacturing of plywood, particle board and fiberboard. In this review paper, various factors affecting gel time and process-ability of UF resin based wood composite are reviewed.
基金Project (0447053) supported by the Natural Science Foundation of Guangxi Province, China Project(50473060) supported by the National Natural Science Foundation of China Project ([2004]20) supported by the Department of Education of Gunangxi Province, China
文摘A new kind of reactive toughening accelerator for epoxy resin, amine-teminated hyperbranched polymer (H2O-NMe2) was synthesized and characterized by FT-IR spectroscopy. Dynamic mechanical analysis (DMA) was used to study the glass transition temperature (Tg), loss factor (tanδ) and activation energy (Ea) by using multiplexing frequency. The results show that the Ea at glassy relaxation process of modified system is about 70-80 kJ/mol higher than that of unmodified system, and the high modulus and good thermal properties are still maintained.
文摘The selective water plugging agent was prepared by heating the blends of the polyacry-lamide inverse latex, modified urea formaldehyde resin, crosslinking agent and catalysts.The results show that using different types of polymers and additives or changing in theirproportion of the blends, the gelling viscosity, starting point of gelling and other propertiesof the IPN can be controlled.
文摘Urea-formaldehyde (UF) resin is widely used as an adhesive for the manufacture of a range of wood and fiber based products. Although the microstructure of this resin has been examined at high resolution by field-emission scanning electron microscopy and atomic force microscopy, transmission electron microscopy (TEM) has thus far not been used, perhaps because of difficulties in ultrathin sectioning this resin in cured (polymerized) state. In the technical note presented here, a novel sample preparation method is described which enabled us to examine the microstructural morphology of UF resin by transmission electron microscopy in ultrathin sections, revealing the presence of spherical particles within the resin. Our initial attempt to ultrathin section the resin directly was not successful as it was too brittle to trim blocks for sectioning. Then, we developed a sample preparation technique that involved impregnation ofPinus radiatawood tissues with the UF resin, and then embedding of resin impregnated wood tissues with Spurr’s low viscosity embedding medium, which has been widely employed in plant and wood ultrastructure work. The TEM images illustrated and the information on the microstructural morphology of the UF resin presented are based on this novel sample preparation approach.
