Genesis, metallogenic model, and prospecting prediction of the Nibao gold deposit in the Guizhou Province, China

Southwestern Guizhou province is one of China’s most important distribution areas of Carlin-type gold deposits. The Nibao deposit is a typical gold deposit in southwestern Guizhou. To elucidate the genesis of the Nibao gold deposit, establish a metallogenic model, and guide prospecting prediction, we systematically collected previously reported geological, geochemical, and dating data and discussed the genesis of the Nibao gold deposit,based on which we proposed the metallogenic model.Earlier works show that the Nibao anticline, F1 fault, and its hanging wall dragged anticline(Erlongqiangbao anticline) were formed before or simultaneously with gold mineralization, while F2, F3, and F4 faults postdate gold mineralization. Regional geophysical data showed extensive low resistivity anomaly areas near the SBT(the product of tectonic slippage and hydrothermal alteration)between the P2/P3 and the strata of the Longtan Formation in the SSE direction of Nibao anticline in the lower plate of F1 and hanging wall dragged anticline(Erlongqiangbao anticline), and the anomaly areas are distributed within the influence range of anticlines. Simultaneously, soil and structural geochemistry show that F1, Nibao anticline,Erlongqiangbao anticline, and their transition areas all show good metallogenic elements(Au, As, and S) assemblage anomalies, with good metallogenic space and prospecting possibilities. There are five main hypotheses about the source of ore-forming fluids and Au in the Nibao gold deposit:(1) related to the Emeishan mantle plume activity;(2) source from the Emeishan basalt;(3) metamorphic fluid mineralization;(4) basin fluid mineralization;(5) related to deep concealed magmatic rocks;of these, the mainstream understanding is the fifth speculation. It is acknowledged that the ore-forming fluids are hydrothermal fluids with medium–low temperature, high pressure, medium–low salinity, low density, low oxygen fugacity, weak acidity, weak reduction, and rich in CO_(2)and CH_(4). The fluid pressure is 2–96.54 MPa, corresponding to depths of 0.23–3.64 km. The dating results show that the metallogenic age is ~141 Ma, the extensional tectonic environment related to the westward subduction of the Pacific Plate. Based on the above explanation, the genetic model related to deep concealed magmatic rocks of the Nibao gold deposit is established, and favorable prospecting areas are outlined;this is of great significance for regional mineral exploration and studying the genesis of gold deposits.

Geophysical-Geological Interpretation and Deep-Seated Gold Deposit Prospecting in Sanshandong-Jiaojia Area, Eastern Shandong Province, China

Integrated gravitational, electrical-magnetic surveys and data processing carried out in the Sanshandao-Jiaojia area, Eastern Shandong Province, northeast China, aim to illuminate the geological characteristics of this shallow-covered area and delineate deep-seated gold prospecting targets. In this region, altogether 12 faults exert critical control on distribution of three types of Early Precambrian metamorphic rock series, i.e. those in the metamorphic rock area, in the granitic rock area underlying the metamorphic rock, and in the remnant metamorphic rock area in granites, respectively. Additionally, the faults have major effects on distribution of four Mesozoic Linglong rock bodies of granite, i.e. the Cangshang, Liangguo, Zhuqiao-Miaojia and Jincheng granites. The Sanshandao and Jiaojia Faults are two well-known regional ore-controlling faults; they have opposite dip direction, and intersect at a depth of 4500 m. Fracture alteration zones have striking geophysical differences relative to the surrounding county rocks. The two faults extend down along dip direction in a gentle wave form, and appear at some steps with different dips. These steps comprise favorable gold prospecting areas, consistent with a step metallogenic model. Six deep-seated gold-prospecting targets are delineated, i.e. Jincheng-Qianchenjia, Xiaoxizhuang-Zhaoxian, Xiyou-Wujiazhuangzi, Xiangyangling-Xinlicun, Panjiawuzi and Miaojia-Pinglidian.

Geological Characteristics and Regional Prospecting Model of Wulanchongji Gold Orebody, Alxa Youqi, Inner Mongolia, China

Five gold deposits (mineralization) were found in the study area by means of geological mapping, soil geochemical survey and trough exploration engineering. The ore-bearing lithology is mainly metamorphic feldspar sandstone of the Upper Carboniferous Benbatu Formation, and the gold (mineralization) body is controlled by both structural factors and stratigraphic factors of the Upper Carboniferous Benbatu Formation. The genetic type is preliminary concluded to be volcanic hydrothermal type, and the metallogenic age is late Variscan. In this paper, by studying the geological characteristics and metallogenic geological conditions of the gold orebody in the area, a regional prospecting model has been established, which is of great significance to better guide the prospecting work of similar gold deposits in the area and the region.

Geological and Geochemical Characteristics and Genesis of the Shaxi Porphyry Copper (Gold) Deposits, Anhui Province

The Shaxi porphyry copper (gold) deposits are a typical example of porphyry copper deposits associated with diorite in eastern China. Quartz diorite, which hosts the deposits, has a Rb-Sr isochron age of 127.9 ± 1.6 Ma. Geochemically, the rock is rich in alkalis (especially sodium), light rare earth elements (LREE) and large-ion lithophile elements (LILE), and has a relatively low initial strontium isotopic ratio (Isr=0.7058); thus it is the product of differentiation of crust-mantle mixing source magma. The model of alteration and mineralization zoning is similar to the Hollister (1974) diorite model. The ore fluids have a relatively high salinity and contain significant amounts of CO2, Ca2+, Na+ and ***CI?. The homogenization temperatures of fluid inclusions for the main mineralization stage range from 280 to 420°C, the δ18O values of the ore fluids vary from 3.51 to 5.52 %, the δD values are in the range between ?82.4 and ?59.8 %, the δ34S values of sulphides vary from ?0.3 to 2.49 %, and the δ13C values of CO2 in inclusions range between ?2.66 and ?6.53 %. Isotope data indicate that the hydrothermal ore fluids and ore substances of the Shaxi porphyry copper (gold) deposits were mainly derived from magmatic systems.

An integrated ore prospecting model for the Nyasirori gold deposit in Tanzania

The Nyasirori gold deposit,located in the middle-western end of the Musoma-Mara Archean greenstone belt in Tanzania,is a tectonic altered rock type gold deposit controlled by shear tectonic zone.This work conducted high-precision ground magnetic measurements to delineate fault structures and favorable prospecting targets,utilized induced polarization(IP)intermediate gradient to roughly determine the distribution and extension of the tectonic altered zone and gold ore(mineralized)bodies,and further carried out IP sounding and magnetotelluric sounding to locate the tectonic altered zone and gold ore(mineralized)bodies.The anomalous gradient belt of the combination of positive and negative micromagnetic measurements reflects the detail of shallow surface tectonic alteration zone and gold mineralization body.Micromagnetic profile anomalies indicate the spatial location and occurrence of concealed tectonic alteration zone and gold(mineralized)ore bodies.Soil geochemical measurements indicate that the ore-forming element Au correlates well with As and Sb,and As and Sb anomalies have a good indication to gold orebodies.Based on the multi-source geological-geophysical-geochemical information of the Nyasirori gold deposit,this work established an integrated prospecting model and proposed a set of geophysical and geochemical methods for optimizing prospecting targets.

Soil geochemical prospecting prediction method based on deep convolutional neural networks-Taking Daqiao Gold Deposit in Gansu Province, China as an example

A method is proposed for the prospecting prediction of subsurface mineral deposits based on soil geochemistry data and a deep convolutional neural network model.This method uses three techniques(window offset,scaling,and rotation)to enhance the number of training data for the model.A window area is used to extract the spatial distribution characteristics of soil geochemistry and measure their correspondence with the occurrence of known subsurface deposits.Prospecting prediction is achieved by matching the characteristics of the window area of an unknown area with the relationships established in the known area.This method can efficiently predict mineral prospective areas where there are few ore deposits used for generating the training dataset,meaning that the deep-learning method can be effectively used for deposit prospecting prediction.Using soil active geochemical measurement data,this method was applied in the Daqiao area,Gansu Province,for which seven favorable gold prospecting target areas were predicted.The Daqiao orogenic gold deposit of latest Jurassic and Early Jurassic age in the southern domain has more than 105 t of gold resources at an average grade of 3-4 g/t.In 2020,the project team drilled and verified the K prediction area,and found 66 m gold mineralized bodies.The new method should be applicable to prospecting prediction using conventional geochemical data in other areas.

A new type of micro-disseminated gold deposits in association with diabase found in Yunnan and Guizhou provinces and Guangxi Zhuang Autonomous Region——Their geological characteristics and metallogenic conditions

With the continuous development of gold ore prospecting and exploration in recent years a new type of micro-disseminated gold deposits have been found in the regions of Southwest Guizhou Province and Northwest Guangxi Zhuang Autonomous Region,with the orebodies directly occurring in diabase or in the contact zone between diabase and strata.The orebodies are strictly controlled by fault structures.The discovery of this type of gold deposits has brought about new prospects for gold ore prospecting in the Yunnan-Guizhou-Guangxi Golden Triangle region.From the preliminary analysis of the geological characteristics of the Qiaoxiang gold deposit in Wangmo County,in combination with the results of research work in the adjacent areas in recent years,this paper roughly described the geological characteristics and metallogenic conditions of this type of gold ore deposits with an attempt to make more and more geologists pay enough attention to this type of gold ore deposits,so as to promote gold ore prospecting in Guizhou Province to develop toward a variety of types of gold deposits in all round way.

Geological characteristics and the origin of ore-forming materials of(Laozhaiwan gold deposit, Yunnan Province

"Golden triangle"area bordered on Yunnan-Guizhou-Guangxi was one of the most important Carlin-type gold deposits concentration areas.Deep understanding of Carlin-type gold deposits in Guizhou and Guangxi Province had reached through several decades studies,but geological environment was very complex in the southeastern Yunnan,and Carlin-type gold deposits produced in the southeastern Yunnan were different from that of America,few studies were taken there.Based on a large number of field work,studies on the geological characteristics combining with geochemistry characteristics were taken,and analysis the genesis of Laozhaiwan gold deposit.The types of alteration in Laozhaiwan gold deposit were mainly silicification and pyritization,and Gold grade was high when silicification and pyritization were both occurred.It could be caculated that fluid density(g/cm3)varied from 0.7 to 4.9,salinity varied from 0.76%to 0.95%and ore-forming pressure(Pa)varied from 1.81×105 to 49.96×105 according to fluid inclusion test results,showed that Laozhaiwan gold deposit was hypabyssal hydrothermal deposit in low temperature and low salinity.According to composition of fluid inclusion analysis,combining with H-O isotope,made theδD-δ18O figure,showed that the fluid of the deposit rooted in formation water and mixed with meteoric waters later.

Geological Characteristics and Prospecting Criteria of Senji Molybdenum Ore Body in Urad Houqi, Inner Mongolia, China

Geological Characteristics and Prospecting Indicators of Senji Molybdenum Ore Body in Urad Houqi, Inner Mongolia Based on geological mapping, soil geochemical survey, surface trough exploration and deep drilling verification and control, the Senji Molybdenum deposit was discovered. Geological characteristics of the molybdenum ore body are described. The host lithology of molybdenum ore body is mainly in the cataclastic carbonated black plagioclase gneiss of the second rock member of the Paleoproterozoic Baoyintu Group, followed by Early Carboniferous monzogranite. The genetic type of the deposit is preliminarily deduced to be a hydrothermal filling vein-type molybdenum deposit. The significance of this paper is to summarize the prospecting marks of the molybdenum ore body in this area, so as to further guide the exploration work in this area, and at the same time provide a useful reference for the exploration work of similar deposits in other areas.

Mineralogical Characteristics and its Prospecting Significance of Gold-Mercury Minerals in Davao Gold Placer in Mindanao Islands, Philippines

This paper has systematically researched mineral assemble and the characteristics of gold-mercury minerals in Davao Placer in Mindanao Islands, Philippines. The results show that reflection force of gold-mercury minerals has a strong-weak-strong of changes features as mercury＇s content in minerals increased. Otherwise their hardness of gold-mercury minerals reduced. While the hardness of gold-mercury minerals, which have isometric crystal structure, they are gradually become larger, the goldmalgam and r-Goldmalgamite just be found to exist as natural edge of gold-mercury mineral grains. Overall, mercury content is gradually reduced from the edge to the centre of gold-mercury minerals particles, but mercury-bearing in edge of the grains is lower than in the middle. Combination of the background of geological mineralization, this paper suggests that there are mantle-derived deposits such as Platinum, chromium in Philippines, which accompanied ultramafic-mafic magmation. It＇s most likely to found some large or extra large scale polymetallic deposits of gold and mercury, as well as coastal placers of gold, platinum, etc.

A Prospecting Mineralogy Study: Arsenopyrite In Endogenetic Gold Deposits

Arsenopyrite is one of very important and common auriferous minerals in endogenetic gold deposits. In seven gold deposits, the prospecting typomorphic characteristics of arsenopyrite, such as morphological typomorphism, composition typomorphism, pyroelectricity typomorphism and so on, were established. The crystal form of arsenopyrite is simple, and the form symbols mainly are {101}, {120}, {210}, {140}, {230}, {012}, etc. The smaller grain and poor crystal form arsenopyrite indicates the better auriferous characteristics. The major elements (Fe, As and S) of gold-bearing arsenopyrite usually show Fe/As+S>0.5,As/S<1 which deviates from its theoretical value. The most important trace element is Au and next is Ag in arsenopyrite, and they often show the positive correlation. The pyroelectricity of arsenopyrite can reflect the mineralization epoch, and it also is related to the crystal form and granudarity.

Thoughts and effects for substituted resource prospecting in Laozuoshan gold deposit in Heilongjiang

According to the Geological settings and the distributed laws of ore bodies and previous research re- suits, combining with latest theories and new methods of geological prospecting, the authors proposed prospec- ting thoughts for substituted resources in Laozuoshan gold deposit. After ore prospecting in two years, nine new blind ore bodies were found, among which four ore bodies contain 4218. 1 kg inferred intrinsic economic re- sources （ 333 ）, and mitigate the crisis situation of mine reserves. At the same time, lots of significant geophysi- cal and geochemical anomalies were found in the peripheral, which provide a basis for further prospecting.

津巴布韦CHEGUTU GOLD金矿地质特征与找矿标志研究

CHEGUTU GOLD金矿围岩为太古界塞巴奎系条带状含铁硅质岩、铁镁质片岩、变质粗玄岩及蛇纹岩等,金成矿与区内NNW向韧性剪切带密切相关,矿体产状总体与区内糜棱叶理产状一致。矿石类型以石英细脉型为主。围岩蚀变有硅化、绢云母化、绿泥石化、碳酸盐化等,以硅化为主,越靠近矿体,硅化越强烈;矿体内以金属矿化为主,以黄铁矿化、黄铜矿化常见,金属硫化物与金的富集呈正相关,矿床成因类型为变质-热液型,多种找矿标志明显,研究结果为以后的地质勘查提供重要参考。

Rock-forming mechanism of Qingshanjiao intrusion in Dongguashan copper(gold) deposit, Tongling area, Anhui province, China

Dongguashan deposit is a large porphyry-skarn copper（gold） deposit in Tongling ore district. The Qingshanjiao intermediate acid intrusion of Yanshanian had a direct genetic relationship with mineralization. The magma origin, rock-forming dynamic background and rock-forming process were studied, and the rock-forming mechanism of Qingshanjiao intrusion was discussed, based on geological characteristics, detailed observation of petrography and systematic investigation of petrochemistry, trace elements and REE geochemistry characteristics of Qingshanjiao intrusion. The results show that Qingshanjiao rock body belongs to high-K calc-alkaline series with higher LREE elements, Th, Rb and Sr abundance, but depleted in HREE elements, Ba, Nb and Ta. The primary magma originated from the mantle-crust mixtures which were caused by basaltic magma of mantle mixing with syenite magma of partial melting of the lower crust, and the formation environment of Qingshanjiao intrusion was emplaced in the transitional environment from compression to extension. The Harker diagram and hybrid structures of plagioclase and potassium feldspar indicate that the fractional crystallization occurred in the process of magmatic evolution. The petrochemistry, trace elements and REE geochemistry characteristics indicate that the magma was contaminated by crustal material during the rock-forming. These results suggested that the Qingshanjiao intrusion was formed by fractional crystallization and assimilation and hybridization of mantle-crust magma in the transitional environment from compression to extensional.

The Kiloton Class Jiaojia Gold Deposit in Eastern Shandong Province and Its Genesis

The recent deep prospecting results in the Jiaojia area of Eastern Shandong Province indicate that the Jiaojia ore field composed of several individual gold deposits as previously suggested is actually an ultra-large gold deposit.This deposit covers an area of ～40 km2,and shows a structural control by the Jiaojia fault and its secondary faults.Gold orebodies generally occur along the same mineralization-alteration belt,and the main orebodies intersect with each other or exhibit a parallel or overlapping distribution.This deposit＇s reserves are estimated to be 1,200t of gold,being the first gold deposit of more than 1000t gold reserves in China.The No.Ⅰ-1 orebody in the Shaling-deep Sizhuang ore blocks holds gold reserves greater than 350 t,or 29 percent of the total reserves,followed by the No.Ⅰ orebody in Matang-Jiaojia ore blocks with exceeding 150t gold reserves.This deposit mainly occurs in the footwall of the Jiaojia fault,and presents zoned patterns in mineralization,alteration and structures.The strongly mineralized zones agree with strongly altered and tectonically fractured zones.These orebodies display strataform-like,veinlike or lenticular shapes,and generally show characteristics of pinching out and reappearing,branching and converging,expanding and shrinking.The orebodies commonly occur along positions where the fault strike changes and in gentle locations with dips changing from steep to gentle.The main orebodies are parallel to the main plane of the orecontrolling fault,and tend to be gentle from the surface to the deep.The orebodies mainly plunge to the southwest,with plunge angle of 45°-606° Orebodies near the main plane of the ore-controlling fault have more gold resource than those away from main fault zone.The slant depth of orebodies is generally larger than the length along its strike direction; orebodies become thick and gold grades become low from the shallow area to the deep area.Ore-forming fluids are H2O-CO2-NaCl±CH4 type with medium-temperature and moderate to low salinity.Sulfur isotopic values （δ34SCDT） for gold ores range between 11.08‰ and 12.58‰,indicating mixed sulfur sources; hydrogen isotopic values （δDVSMOW） range from-83.68‰ to-116.95‰ and oxygen isotopic values （δ18OV-SMOW） range between 12.04‰ and 16.28‰.The hydrogen and oxygen isotopes suggest that ore-forming fluids originated from primary magma,and mixing with a large amount of atmospheric water during the late stage.The Eastern Shandong Province gold deposits are associated with magmatic activities which have mantle crust-mixed source,and also share some similarities with orgenic and epithermal hydrothermal golddeposits.Because Eastern Shandong Province gold deposits with unique metailogenic features and formation setting which are different from other gold deposit types in the world,we call it the Jiaojiatype gold deposits.The kiloton class Jiaojia gold deposit is related to fluid activities,extension and detachment resulted from thermal upweiling of magmas.The strong magmatic activities in the middle to late stage of early Cretaceous in Eastern Shandong Province lead to active fluids,and provided abundant ore-forming materials for gold depsoits.Moreover,many extensional structures resulting from crustal extension provided favourable space for orebody positioning.

Geology and mineralization of the Sanshandao supergiant gold deposit(1200 t)in the Jiaodong Peninsula,China:A review

The Jiaodong Peninsula in Shandong Province,China is the world’s third-largest gold metallogenic area,with cumulative proven gold resources exceeding 5000 t.Over the past few years,breakthroughs have been made in deep prospecting at a depth of 500‒2000 m,particularly in the Sanshandao area where a huge deep gold orebody was identified.Based on previous studies and the latest prospecting progress achieved by the project team of this study,the following results are summarized.(1)3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield,which was previously considered to consist of several independent deposits,is a supergiant deposit with gold resources of more than 1200 t(including 470 t under the sea area).The length of the major orebody is nearly 8 km,with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction.(2)Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined,forming a stepped metallogenic model from shallow to deep level.The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults,the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed.Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure,these sections along the fault plane serve as the target areas for deep prospecting.(3)Thermal uplifting-extensional structures provide thermodynamic conditions,migration pathways,and deposition spaces for gold mineralization.Meanwhile,the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks.This further led to the reactivation of ore-forming elements,which provided rich materials for gold mineralization.(4)It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma,which was superimposed by nonferrous metals mineralization at 118‒111 Ma.The fluids were dominated by primary mantle water or magmatic water.Metamorphic water occurred in the early stage of the gold mineralization,while the fluid composition was dominated by meteoric water in the late stage.The S,Pb,and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks,indicating that the ore-forming materials mainly derive from crustal materials,with the minor addition of mantle-derived materials.The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle,which is different from typical orogenic gold deposits.Thus,it is proposed that they are named“Jiaodong-type”gold deposits.

Geological Conditions and Prospect Forecast of Shale Gas Formation in Qiangtang Basin, Qinghai-Tibet Plateau

The presence of shale gas has been confirmed in almost every marine shale distribution area in North America.Formation conditions of shale gas in China are the most favorable for marine,organic-rich shale as well.But there has been little research focusing on shale gas in Qiangtang Basin,Qinghai-Tibet Plateau,where a lot of Mesozoic marine shale formations developed.Based on the survey results of petroleum geology and comprehensive test analysis data for Qinghai-Tibet Plateau,for the first time,this paper discusses characteristics of sedimentary development,thickness distribution,geochemistry,reservoir and burial depth of organic-rich shale,and geological conditions for shale gas formation in Qiangtang Basin.There are four sets of marine shale strata in Qiangtang Basin including Upper Triassic Xiaochaka Formation （T3x）,Middle Jurassic Buqu Formation （J2b）,Xiali Formation （J2x） and Upper Jurassic Suowa Formation （J3s）,the sedimentary types of which are mainly bathyal-basin facies,open platform-platform margin slope facies,lagoon and tidal-fiat facies,as well as delta facies.By comparing it with the indicators of gas shale in the main U.S.basins,it was found that the four marine shale formations in Qiangtang Basin constitute a multi-layer distribution of organic-rich shale,featuring a high degree of thickness and low abundance of organic matter,high thermal evolution maturity,many kinds of brittle minerals,an equivalent content of quartz and clay minerals,a high content of feldspar and low porosity,which provide basic conditions for an accumulation of shale gas resources.Xiaochaka Formation shale is widely distributed,with big thickness and the best gas generating indicators.It is the main gas source layer.Xiali Formation shale is of intermediate thickness and coverage area,with relatively good gas generating indicators and moderate gas formation potential.Buqu Formation shale and Suowa Formation shale are of relatively large thickness,and covering a small area,with poor gas generating indicators,and limited gas formation potential.The shale gas geological resources and technically recoverable resources were estimated by using geologic analogy method,and the prospective areas and potentially favorable areas for Mesozoic marine shale gas in Qiangtang Basin are forecast and analyzed.It is relatively favorable in a tectonic setting and indication of oil and gas,shale maturity,sedimentary thickness and gypsum-salt beds,and in terms of mineral association for shale gas accumulation.But the challenge lies in overcoming the harsh natural conditions which contributes to great difficulties in ground engineering and exploration,and high exploration costs.

Ore-forming and Exploration Models of the Baguamiao Gold Deposit,Shaanxi Province

The Baguamiao superlarge gold deposit in Shaanxi Province is one of the typical cases in China that are hosted by sedimentary rocks. Explorers and researchers have discussed the gold mineralization enrichment conditions by studying sulphur, oxygen, carbon, silicon stable isotopes and mineralizing fluid features of the Baguamiao gold deposit and proposed a hydrothermal sedimentation-magmatic reconstructing gold mineralization model featuring multi-sources of ore-forming materials and multistage mineralizations. In addition, prospecting for “Baguamiao-type” gold deposits was started in the Fengtai Basin and a great number of important prospecting targets such as Tonglinggou, Simaoling, Guoansi and Dachaigou were discovered.

Geology and mineralization of the Dayin’gezhuang supergiant gold deposit(180 t)in the Jiaodong Peninsula,China:A review

The Dayin’gezhuang gold deposit is located in the central part of the Zhaoping Fault metallogenic belt in the Jiaodong gold province-the world’s third-largest gold metallogenic area.It is a typical successful case of prospecting at a depth of 500-2000 m in recent years,with cumulative proven gold resources exceeding 180 t.The main orebodies(No.1 and No.2 orebody)generally have a pitch direction of NNE and a plunge direction of NEE.As the ore-controlling fault,the Zhaoping Fault is a shovel-shaped stepped fault,with its dip angle presenting stepped high-to-low transitions at the elevation of -2000-0 m.The gold mineralization enrichment area is mainly distributed in the step parts where the fault plane changes from steeply to gently,forming a stepped metallogenic pattern from shallow to deep.It can be concluded from previous studies that the gold mineralization of the Dayin’gezhuang gold deposit occurred at about 120 Ma.The ore-forming fluids were H_(2)O-CO_(2)-NaCl-type hydrothermal solutions with a medium-low temperature and medium-low salinity.The H-O isotopic characteristics indicate that the fluids in the early ore-forming stage were possibly magmatic water or mantle water and that meteoric water gradually entered the ore-forming fluids in the late ore-forming stage.The S and Pb isotopes indicate that the ore-forming materials mainly originate from the lower crust and contain a small quantity of mantle-derived components.The comprehensive analysis shows that the Dayin’gezhuang gold deposit was formed by thermal uplifting-extensional tectonism.The strong crust-mantle interactions,large-scale magmatism,and the material exchange arising from the transformation from adakitic granites to arc granites and from the ancient lower crust to the juvenile lower crust during the Early Cretaceous provided abundant fluids and material sources for mineralization.Moreover,the detachment faults formed by the rapid magmatic uplift and the extensional tectonism created favorable temperature and pressure conditions and space for fluid accumulation and gold precipitation and mineralization.