We have proposed a two-dimensional acoustic Maxwell’s fish-eye lens by using the gradient-index metamaterials with space-coiling units. By adjusting the structural parameters of the units, the refractive index can be...We have proposed a two-dimensional acoustic Maxwell’s fish-eye lens by using the gradient-index metamaterials with space-coiling units. By adjusting the structural parameters of the units, the refractive index can be gradually varied, which is key role to design the acoustic fish-eye lens. As predicted by ray trajectories on a virtual sphere, the proposed lens has the capability to focus the acoustic wave irradiated from a point source at the surface of the lens on the diametrically opposite side of the lens. The broadband and low loss performance is further demonstrated for the lens. The proposed acoustic fish-eye lens is expected to have the potential applications in directional acoustic coupler or coherent ultrasonic imaging.展开更多
In this paper, a polymer spherical symmetry GRIN sphere lens were prepared by the suspension-diffusion-copolymerization(SDC) technique, selecting methyl methacrylate(MMA) as monomer M1 and acrylic 2,2,2-trifluoroethyl...In this paper, a polymer spherical symmetry GRIN sphere lens were prepared by the suspension-diffusion-copolymerization(SDC) technique, selecting methyl methacrylate(MMA) as monomer M1 and acrylic 2,2,2-trifluoroethyl ester(3FEA) as M2. The radial distribution of refractive index of the lens was measured by the shearing interference method, which demonstrated that the quadratic refractive-index distribution was formed in the sphere lens, and its Δn=0.019.展开更多
Gradient index (GRIN) lenses are often used as an optical relay to a sample at a location that is not accessible for a standard microscope. This capability is turning them into an important enabling technology that ex...Gradient index (GRIN) lenses are often used as an optical relay to a sample at a location that is not accessible for a standard microscope. This capability is turning them into an important enabling technology that extends many optical imaging modalities like harmonic laser scanned imaging with micro endoscopic in vivo capabilities as needed in research and diagnostics. These micro endoscopic imaging variants however rely on the light scattering capability of the underlying tissue. Further complications arise from an increased number of optical interfaces and the overall optical performance of a GRIN rod. We have therefore performed a quantitative comparison of the back-scattered second harmonic generation (SHG) signal intensity generated in skin and low-scattering muscle tissue, both obtained with a standard two photon laser scanning microscope (LSM) and a GRIN lens based LSM. We report that the GRIN lens based system sees approximately 1/4 of the net two photon signal detected by the standard LSM. We expect that this value can be generalized to other LSM techniques enhanced by GRIN technology and encourage its use in experimental situations with standard LSM signal to noise ratios of four or higher.展开更多
Gradient-index rod lens (GRIN-lens) whose pitch is ordinary value with bevel ferrule coupling system is analyzed, an equivalent method which can be used to analyze this system is put forward, and a general formula for...Gradient-index rod lens (GRIN-lens) whose pitch is ordinary value with bevel ferrule coupling system is analyzed, an equivalent method which can be used to analyze this system is put forward, and a general formula for determining the coupling loss with axes mismatch, radial mismatch, and angular mismatch is derived by use of the Gaussian field approximation and mode-field coupling theory. The experimental results are in good agreement with the theory prediction. It indicates that these formulas are suitable to analyze the gradient-index rod lens coupling system with pigtail fiber.展开更多
It is shown that aplanatic lens with a radial gradient of refraction index is simultaneously a telescopic lens, notably not only for an axial beam, but also for an off axis parallel beam. Consideration is carried out ...It is shown that aplanatic lens with a radial gradient of refraction index is simultaneously a telescopic lens, notably not only for an axial beam, but also for an off axis parallel beam. Consideration is carried out by an algebraic way on the basis of regularities of ray paths. It is also shown that aplanatic and telescopic properties of the lens are independent of the refracting surface shapes. Various versions of lens performance are shown below.展开更多
The gel rod, partially polymerized DAP (diallyl phthalate), is immersed in MMA (methyl methacrylate) solution, followed by heat-treatment to yield the GRIN (gradient ref- ractive index) rod. A three-stage mechanism of...The gel rod, partially polymerized DAP (diallyl phthalate), is immersed in MMA (methyl methacrylate) solution, followed by heat-treatment to yield the GRIN (gradient ref- ractive index) rod. A three-stage mechanism of diffusion-copolymerization process is propo- sed, giving an interpretation to the formation of cracks that are brought about in large-dia- meter GRIN rods.展开更多
In order to verify the properties of the light propagating through a gradient-index （GRIN） fibre probe for optical coherence tomography （OCT）, numerical simulation using the optical software GLAD is carried out. F...In order to verify the properties of the light propagating through a gradient-index （GRIN） fibre probe for optical coherence tomography （OCT）, numerical simulation using the optical software GLAD is carried out. Firstly, the model of the GRIN fibre probe is presented, which is consisted of a single mode fibre （SMF）, a no-core fibre （NCF）, a GRIN fibre lens and an air path. Then, the software GLAD is adopted to numerically investigate how the lengths of the NCF and the GRIN fibre lens influence the performance of the Gaussian beam focusing through the GRIN fibre probe. The simulation results are well consistent with the experimental ones, showing that the GLAD based numerical simulation technique is an intuitive and effective tool for the verification of the properties of the light propagation. In this paper, we find that on the conditions of a constant GRIN fibre lens length of 0.1 mm and an NCF length of 0.36 mm, the working distance of the probe will be 0.75 mm and the focus spot size is 32 μm.展开更多
This study presents a new method for designing algorithm for a triplet lens with one or two elements that are made of a gradient index medium (GRIN). This method is based upon considering a well-known designed triplet...This study presents a new method for designing algorithm for a triplet lens with one or two elements that are made of a gradient index medium (GRIN). This method is based upon considering a well-known designed triplet lens (Cooke triplet lens) as a target lens for designing of the Hybrid Triplet Lens (HTL). Our design was based upon keeping the total optical path length for the axial ray fixed for each case of design. The results showed that several designs for the HTL have the same total powers of the target lens. These designs depend on the variation of the GRIN element parameter values and the order of the GRIN element position in the system. These HTL designs have been evaluated by considering several optical merit functions, i.e., the root mean square (RMS) spot radius, wave front error and the spherical aberration. To achieve the optimal design, these functions are compared for the target lens and the HTL designs through a wide range of field angles.展开更多
We investigate the use of graded inhomogeneities in order to enhance the focusing and collimation performance of structure-embedded acoustic metamaterial lenses.The type of inhomogeneity exploited in this study consis...We investigate the use of graded inhomogeneities in order to enhance the focusing and collimation performance of structure-embedded acoustic metamaterial lenses.The type of inhomogeneity exploited in this study consists in axial symmetric exponential-like gradients of either material or geometric properties that create gradient-index inclusions able to bend and redirect propagating waves.In particular,we exploit the concept of gradient index inclusions to achieve focusing and collimation of ultrasonic beams created by embedded drop-channel lenses in both bulk and thin-walled structures.In the latter,the implementation is possible thanks to geometric exponential tapers known as Acoustic Black Holes(ABH).ABH tapers allow accurate control of the characteristics of the acoustic beam emanating from the lens channel which in the conventional design is severely affected by diffraction.The concept of beam control via graded inclusions is numerically illustrated and validated by using a combination of methodologies including geometric acoustics,finite difference time domain,and finite element methods.展开更多
基金supported by the National Basic Research Program of China(Grant No.2012CB921504)the National Natural Science Foundation of China(Grant Nos.11574148,11474162,1274171,11674172,and 11674175)the Specialized Research Fund for the Doctoral Program of Higher Education,China(Grant Nos.20110091120040 and 20120091110001)
文摘We have proposed a two-dimensional acoustic Maxwell’s fish-eye lens by using the gradient-index metamaterials with space-coiling units. By adjusting the structural parameters of the units, the refractive index can be gradually varied, which is key role to design the acoustic fish-eye lens. As predicted by ray trajectories on a virtual sphere, the proposed lens has the capability to focus the acoustic wave irradiated from a point source at the surface of the lens on the diametrically opposite side of the lens. The broadband and low loss performance is further demonstrated for the lens. The proposed acoustic fish-eye lens is expected to have the potential applications in directional acoustic coupler or coherent ultrasonic imaging.
文摘In this paper, a polymer spherical symmetry GRIN sphere lens were prepared by the suspension-diffusion-copolymerization(SDC) technique, selecting methyl methacrylate(MMA) as monomer M1 and acrylic 2,2,2-trifluoroethyl ester(3FEA) as M2. The radial distribution of refractive index of the lens was measured by the shearing interference method, which demonstrated that the quadratic refractive-index distribution was formed in the sphere lens, and its Δn=0.019.
文摘Gradient index (GRIN) lenses are often used as an optical relay to a sample at a location that is not accessible for a standard microscope. This capability is turning them into an important enabling technology that extends many optical imaging modalities like harmonic laser scanned imaging with micro endoscopic in vivo capabilities as needed in research and diagnostics. These micro endoscopic imaging variants however rely on the light scattering capability of the underlying tissue. Further complications arise from an increased number of optical interfaces and the overall optical performance of a GRIN rod. We have therefore performed a quantitative comparison of the back-scattered second harmonic generation (SHG) signal intensity generated in skin and low-scattering muscle tissue, both obtained with a standard two photon laser scanning microscope (LSM) and a GRIN lens based LSM. We report that the GRIN lens based system sees approximately 1/4 of the net two photon signal detected by the standard LSM. We expect that this value can be generalized to other LSM techniques enhanced by GRIN technology and encourage its use in experimental situations with standard LSM signal to noise ratios of four or higher.
文摘Gradient-index rod lens (GRIN-lens) whose pitch is ordinary value with bevel ferrule coupling system is analyzed, an equivalent method which can be used to analyze this system is put forward, and a general formula for determining the coupling loss with axes mismatch, radial mismatch, and angular mismatch is derived by use of the Gaussian field approximation and mode-field coupling theory. The experimental results are in good agreement with the theory prediction. It indicates that these formulas are suitable to analyze the gradient-index rod lens coupling system with pigtail fiber.
文摘It is shown that aplanatic lens with a radial gradient of refraction index is simultaneously a telescopic lens, notably not only for an axial beam, but also for an off axis parallel beam. Consideration is carried out by an algebraic way on the basis of regularities of ray paths. It is also shown that aplanatic and telescopic properties of the lens are independent of the refracting surface shapes. Various versions of lens performance are shown below.
文摘The gel rod, partially polymerized DAP (diallyl phthalate), is immersed in MMA (methyl methacrylate) solution, followed by heat-treatment to yield the GRIN (gradient ref- ractive index) rod. A three-stage mechanism of diffusion-copolymerization process is propo- sed, giving an interpretation to the formation of cracks that are brought about in large-dia- meter GRIN rods.
基金supported by the International Cooperation Project of Shanghai Science and Technology Committee,China(Grant No.09530708700)
文摘In order to verify the properties of the light propagating through a gradient-index （GRIN） fibre probe for optical coherence tomography （OCT）, numerical simulation using the optical software GLAD is carried out. Firstly, the model of the GRIN fibre probe is presented, which is consisted of a single mode fibre （SMF）, a no-core fibre （NCF）, a GRIN fibre lens and an air path. Then, the software GLAD is adopted to numerically investigate how the lengths of the NCF and the GRIN fibre lens influence the performance of the Gaussian beam focusing through the GRIN fibre probe. The simulation results are well consistent with the experimental ones, showing that the GLAD based numerical simulation technique is an intuitive and effective tool for the verification of the properties of the light propagation. In this paper, we find that on the conditions of a constant GRIN fibre lens length of 0.1 mm and an NCF length of 0.36 mm, the working distance of the probe will be 0.75 mm and the focus spot size is 32 μm.
文摘This study presents a new method for designing algorithm for a triplet lens with one or two elements that are made of a gradient index medium (GRIN). This method is based upon considering a well-known designed triplet lens (Cooke triplet lens) as a target lens for designing of the Hybrid Triplet Lens (HTL). Our design was based upon keeping the total optical path length for the axial ray fixed for each case of design. The results showed that several designs for the HTL have the same total powers of the target lens. These designs depend on the variation of the GRIN element parameter values and the order of the GRIN element position in the system. These HTL designs have been evaluated by considering several optical merit functions, i.e., the root mean square (RMS) spot radius, wave front error and the spherical aberration. To achieve the optimal design, these functions are compared for the target lens and the HTL designs through a wide range of field angles.
文摘We investigate the use of graded inhomogeneities in order to enhance the focusing and collimation performance of structure-embedded acoustic metamaterial lenses.The type of inhomogeneity exploited in this study consists in axial symmetric exponential-like gradients of either material or geometric properties that create gradient-index inclusions able to bend and redirect propagating waves.In particular,we exploit the concept of gradient index inclusions to achieve focusing and collimation of ultrasonic beams created by embedded drop-channel lenses in both bulk and thin-walled structures.In the latter,the implementation is possible thanks to geometric exponential tapers known as Acoustic Black Holes(ABH).ABH tapers allow accurate control of the characteristics of the acoustic beam emanating from the lens channel which in the conventional design is severely affected by diffraction.The concept of beam control via graded inclusions is numerically illustrated and validated by using a combination of methodologies including geometric acoustics,finite difference time domain,and finite element methods.
