Fine-grained BaTiO3-based X7R ceramic materials were prepared and the effects of milling process on the core-shell structures and dielectric properties were investigated using scanning electron microscope, transmissio...Fine-grained BaTiO3-based X7R ceramic materials were prepared and the effects of milling process on the core-shell structures and dielectric properties were investigated using scanning electron microscope, transmission electron microscope, and energy dispersive spectroscopy （EDS）. As the milling time extends, the dielectric constant of the ceramics increases, whereas the temperature coefficient of capacitance at 125℃ drops quickly. The changes in dielectric properties are considered relevant to the microstructure evolution caused by the milling process. Defects on the surface of BaTiO3 particles increase because of the effects of milling process, which will make it easier for additives to diffuse into the interior grains. As the milling time increases, the shell region gets thicker and the core region gets smaller; however, EDS results show that the chemical inhomogeneity between grain core and grain shell becomes weaker.展开更多
The Al-5Ti-0.2C-based grain refiners with different contents of rare earth （RE） were successfully prepared via powder metallurgy and vacuum casting. The microstructural evolution has been studied by X-ray diffracti...The Al-5Ti-0.2C-based grain refiners with different contents of rare earth （RE） were successfully prepared via powder metallurgy and vacuum casting. The microstructural evolution has been studied by X-ray diffraction （XRD）, differential scanning calorimetry （DSC）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results showed that the RE addition resulted in the formation of TiAl3/Ti2Al20RE core-shell structured primary particles, and the size of TiAl3 core decreased, while the thickness of Ti2Al20RE increased with increase of RE contents. As compared to Al-5Ti-0.2C grain refiner, the grain refining efficiency was gradually improved with increase of RE contents, which was mainly attributed to the TiAl3/Ti2Al20RE core-shell structured primary particles and insoluble TiC nuclei formed inα-Al matrix. The formation mechanism of core-shell structure was further investigated based on Ginstling-Brounstein model.展开更多
The samples with full density were prepared by hot pressing the the melt-spun powders mixed with DyF_(3)powders of different mass fractions followed by hot-deformation process.The magnetic properties and temperature d...The samples with full density were prepared by hot pressing the the melt-spun powders mixed with DyF_(3)powders of different mass fractions followed by hot-deformation process.The magnetic properties and temperature dependence of coercivity were obtained by BH tracer and VSM,respectively.The microstructure were analyzed by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The coercivity of Ce-containing hot-deformed magnets is increased from 1.41 to 1.95 T by grain boundary diffusion of 3 wt%DyF_(3),and is further enhanced to 2.05 T after annealing treatment.The thermal stability of coercivity and remanence is improved.The annealing condition in this work crucially plays a role in thickening the grain boundary phase.Microstructure analysis reveals that the continuous and thick grain boundary phase formed after DyF_(3)diffusion can weaken the magnetic coupling between grains,and suppress the platelet shaped grain size and the aspect ratio.The Dycontaining shell structure formed by the partial diffusion of Dy into the main phase can increase the magnetic anisotropy field,which is the main reason for the coercivity improvement.After optimizing the structure by DyF_(3)diffusion,the"dendritic-like"reverse domain is transformed into the"dot scatteredlike"reverse domain.展开更多
采用化学包覆法将Ho_2O_3包覆在纳米级钛酸钡粉体表面,通过烧结将Ho^(3+)扩散到钛酸钡晶粒中,调节其介电性能,研究了不同Ho^(3+)掺杂量对Ba Ti O3基陶瓷相组成、微观结构和介电性能的影响。X射线衍射和扫描电子显微镜分析结果表明:Ho^(...采用化学包覆法将Ho_2O_3包覆在纳米级钛酸钡粉体表面,通过烧结将Ho^(3+)扩散到钛酸钡晶粒中,调节其介电性能,研究了不同Ho^(3+)掺杂量对Ba Ti O3基陶瓷相组成、微观结构和介电性能的影响。X射线衍射和扫描电子显微镜分析结果表明:Ho^(3+)改性陶瓷样品均为赝立方相,Ho^(3+)的加入能抑制晶粒生长,改善陶瓷微观结构,有利于制备均匀的细晶陶瓷。透射电子显微镜观察显示,包覆层的厚度约为2 nm,包覆Ho_2O_3有助于陶瓷烧结过程中形成"核-壳"结构晶粒,能显著改善钛酸钡基陶瓷的介电温度稳定性,提高绝缘电阻。当Ho^(3+)掺杂量为2.0%时,陶瓷的相对介电常数为1 612,ΔC/C(-55~150℃)<±15%,满足EIA X8R电容器的温度特性。展开更多
基金supported by the National Science fund for Distinguished Young Scholars (No.50625204)the National Natural Science Foundation of China (Science Fund for Creative Research Groups)(No.50621201)+1 种基金the Major State Basic Research Development Program of China (No.2009CB623301)the National High-Tech Research and Development Program of China (No.2006AA03Z0428), and Samsung Electro-Mechanics Co., Ltd.
文摘Fine-grained BaTiO3-based X7R ceramic materials were prepared and the effects of milling process on the core-shell structures and dielectric properties were investigated using scanning electron microscope, transmission electron microscope, and energy dispersive spectroscopy （EDS）. As the milling time extends, the dielectric constant of the ceramics increases, whereas the temperature coefficient of capacitance at 125℃ drops quickly. The changes in dielectric properties are considered relevant to the microstructure evolution caused by the milling process. Defects on the surface of BaTiO3 particles increase because of the effects of milling process, which will make it easier for additives to diffuse into the interior grains. As the milling time increases, the shell region gets thicker and the core region gets smaller; however, EDS results show that the chemical inhomogeneity between grain core and grain shell becomes weaker.
基金Project supported by National High Technology Research and Development Program of China(2013AA031001)the National Basic Research Program of China(2012CB619503)International Science&Technology Cooperation Program of China(2012DFA50630)
文摘The Al-5Ti-0.2C-based grain refiners with different contents of rare earth （RE） were successfully prepared via powder metallurgy and vacuum casting. The microstructural evolution has been studied by X-ray diffraction （XRD）, differential scanning calorimetry （DSC）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The results showed that the RE addition resulted in the formation of TiAl3/Ti2Al20RE core-shell structured primary particles, and the size of TiAl3 core decreased, while the thickness of Ti2Al20RE increased with increase of RE contents. As compared to Al-5Ti-0.2C grain refiner, the grain refining efficiency was gradually improved with increase of RE contents, which was mainly attributed to the TiAl3/Ti2Al20RE core-shell structured primary particles and insoluble TiC nuclei formed inα-Al matrix. The formation mechanism of core-shell structure was further investigated based on Ginstling-Brounstein model.
基金Project supported by the Ningbo Science and Technology Major Project(2017B10002,2019B10093)the Zhejiang Province Technology Application Research(LGG19E010001)the National Natural Science Foundation of China(51671207)。
文摘The samples with full density were prepared by hot pressing the the melt-spun powders mixed with DyF_(3)powders of different mass fractions followed by hot-deformation process.The magnetic properties and temperature dependence of coercivity were obtained by BH tracer and VSM,respectively.The microstructure were analyzed by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The coercivity of Ce-containing hot-deformed magnets is increased from 1.41 to 1.95 T by grain boundary diffusion of 3 wt%DyF_(3),and is further enhanced to 2.05 T after annealing treatment.The thermal stability of coercivity and remanence is improved.The annealing condition in this work crucially plays a role in thickening the grain boundary phase.Microstructure analysis reveals that the continuous and thick grain boundary phase formed after DyF_(3)diffusion can weaken the magnetic coupling between grains,and suppress the platelet shaped grain size and the aspect ratio.The Dycontaining shell structure formed by the partial diffusion of Dy into the main phase can increase the magnetic anisotropy field,which is the main reason for the coercivity improvement.After optimizing the structure by DyF_(3)diffusion,the"dendritic-like"reverse domain is transformed into the"dot scatteredlike"reverse domain.
