We demonstrate a nanosecond mode-locked erbium-doped fiber laser （EDFL） based on a reduced graphene oxide （RGO） saturable absorber （SA）. The RGO SA is prepared by depositing the graphene oxide （GO） on fluorine...We demonstrate a nanosecond mode-locked erbium-doped fiber laser （EDFL） based on a reduced graphene oxide （RGO） saturable absorber （SA）. The RGO SA is prepared by depositing the graphene oxide （GO） on fluorine mica through thermal reduction of GO. A scanning electron microscope （SEM）, Raman spectrometer, and x-ray photoelectron spec- troscopy （XPS） are adopted to analyze the RGO characteristics. The results show that the reduction degree of graphene oxide is very high. By embedding the RGO SA into the EDFL cavity, a stable mode-locked fiber laser is achieved with a central wavelength of 1567.29 nm and repetition rate of 12.66 MHz. The maximum output power and the minimum pulse duration are measured to be 18.22 mW and 1.38 ns respectively. As far as we know, the maximum output power of 18.22 mW is higher than those of other nanosecond mode-locked oscillators reported. Such a nanosecond pulse duration and megahertz repetition rate make this mode-locked erbium-doped fiber laser a suitable seed oscillator for high-power applications and chirped pulse amplifications.展开更多
Graphene-microfiber with the advantage of graphene material and the microfiber has been hailed as a wonderful waveguide in optics. A tutorial introduction to the graphene-microfiber （GMF） waveguides including the ef...Graphene-microfiber with the advantage of graphene material and the microfiber has been hailed as a wonderful waveguide in optics. A tutorial introduction to the graphene-microfiber （GMF） waveguides including the effect of graphene on waveguide, fabrication and applica- tions has been presented. Here, we reviewed recent progress in the graphene waveguides from mode-locking and Q-switching in fiber laser to gas sensing and optical modulation. A brief outlook for opportunities and challenges of GMF in the future has been presented. With the novel nanotechnology emerging, GMF could offer new possibilities for future-optic circuits, systems and networks.展开更多
基金Project supported by the Central University Special Fund for Basic Research and Operating Expenses,China(Grant No.GK201702005)the Natural Science Foundation of Shaanxi Province,China(Grant No.2017JM6091)+1 种基金the National Natural Science Foundation of China(Grant No.61705183)the Fundamental Research Funds for the Central Universities(Grant No.2017TS011)
文摘We demonstrate a nanosecond mode-locked erbium-doped fiber laser （EDFL） based on a reduced graphene oxide （RGO） saturable absorber （SA）. The RGO SA is prepared by depositing the graphene oxide （GO） on fluorine mica through thermal reduction of GO. A scanning electron microscope （SEM）, Raman spectrometer, and x-ray photoelectron spec- troscopy （XPS） are adopted to analyze the RGO characteristics. The results show that the reduction degree of graphene oxide is very high. By embedding the RGO SA into the EDFL cavity, a stable mode-locked fiber laser is achieved with a central wavelength of 1567.29 nm and repetition rate of 12.66 MHz. The maximum output power and the minimum pulse duration are measured to be 18.22 mW and 1.38 ns respectively. As far as we know, the maximum output power of 18.22 mW is higher than those of other nanosecond mode-locked oscillators reported. Such a nanosecond pulse duration and megahertz repetition rate make this mode-locked erbium-doped fiber laser a suitable seed oscillator for high-power applications and chirped pulse amplifications.
文摘Graphene-microfiber with the advantage of graphene material and the microfiber has been hailed as a wonderful waveguide in optics. A tutorial introduction to the graphene-microfiber （GMF） waveguides including the effect of graphene on waveguide, fabrication and applica- tions has been presented. Here, we reviewed recent progress in the graphene waveguides from mode-locking and Q-switching in fiber laser to gas sensing and optical modulation. A brief outlook for opportunities and challenges of GMF in the future has been presented. With the novel nanotechnology emerging, GMF could offer new possibilities for future-optic circuits, systems and networks.
