N-doped graphene quantum dot-decorated N-TiO2/P-doped porous hollow g-C_(3)N_(4) nanotube composite photocatalysts for antibiotic photodegradation and H2 production

Exclusive responsiveness to ultraviolet light (~3.2 eV) and high photogenerated charge recombination rate are the two primary drawbacks of pure TiO_(2). We combined N-doped graphene quantum dots (N-GQDs), morphology regulation, and heterojunction construction strategies to synthesize N-GQD/N-doped TiO_(2)/P-doped porous hollow g-C_(3)N_(4) nanotube (PCN) composite photocatalysts (denoted as G-TPCN). The optimal sample (G-TPCN doped with 0.1wt% N-GQD, denoted as 0.1% G-TPCN) exhibits significantly enhanced photoabsorption, which is attributed to the change in bandgap caused by elemental doping (P and N), the improved light-harvesting resulting from the tube structure, and the upconversion effect of N-GQDs. In addition, the internal charge separation and transfer capability of0.1% G-TPCN are dramatically boosted, and its carrier concentration is 3.7, 2.3, and 1.9 times that of N-TiO_(2), PCN, and N-TiO_(2)/PCN(TPCN-1), respectively. This phenomenon is attributed to the formation of Z-scheme heterojunction between N-TiO_(2) and PCNs, the excellent electron conduction ability of N-GQDs, and the short transfer distance caused by the porous nanotube structure. Compared with those of N-TiO_(2), PCNs, and TPCN-1, the H2 production activity of 0.1%G-TPCN under visible light is enhanced by 12.4, 2.3, and 1.4times, respectively, and its ciprofloxacin (CIP) degradation rate is increased by 7.9, 5.7, and 2.9 times, respectively. The optimized performance benefits from excellent photoresponsiveness and improved carrier separation and migration efficiencies. Finally, the photocatalytic mechanism of 0.1% G-TPCN and five possible degradation pathways of CIP are proposed. This study clarifies the mechanism of multiple modification strategies to synergistically improve the photocatalytic performance of 0.1% G-TPCN and provides a potential strategy for rationally designing novel photocatalysts for environmental remediation and solar energy conversion.

La内嵌graphene/MoS_(2)层的储氢性能研究

运用密度泛函理论研究了La内嵌graphene/MoS_(2)层的储氢性能.由于La的内嵌graphene/MoS_(2)异质结的层间距被拉大.详细研究了氢气分子在La内嵌的graphene/MoS_(2)结构上的吸附行为.结果表明,一个La原子最多可以吸附六个氢气分子,采用GGA/PBE泛函计算得到氢气分子的平均吸附能为0.198 eV.合适的吸附能使得设计材料能够在温和条件下实现可逆存储.重要的是,La原子能够分散地内嵌在graphene/MoS_(2)异质结中,这将为氢气分子提供更多吸附位.研究表明理论上预测La内嵌graphene/MoS_(2)材料是一种潜在的储氢材料.

Hierarchical Reduced Graphene Oxide-MnO_(2)@Polypyrrole Coaxial Nanotube Composite Hydrogel as a Potential Adsorbent for Cr(Ⅵ)Removal

A hierarchical reduced graphene oxide-MnO_(2)@polypyrrole coaxial nanotube composite hydrogel was prepared via oxidative polymerization of pyrrole in the presence of MnO_(2)nanotubes,followed by the hydrothermal treatment of graphene oxide and MnO_(2)@polypyrrole coaxial nanotubes.The stable composite hydrogel with a hierarchical network was composed of one-dimensional MnO_(2)@polypyrrole coaxial nanotube and two-dimensional graphene nanosheet and characterized by scanning electron microscope,Fourier transform infrared spectroscopy,X-ray diffraction,Brunauer-Emmett-Teller surface,and X-ray photoelectron spectroscopy measurements.The composite hydrogel can be used as an efficient adsorbent for Cr(Ⅵ)removal due to the synergistic interaction between graphene and MnO_(2)@polypyrrole and the hierarchical structure of the hydrogel.Moreover,the composite hydrogel is easily separated because of its stable monolith,and it is reusable(76.8%of removal ability remaining after five adsorption-desorption cycles).The simple fabrication and cost-effective separation process together with the excellent absorption performance endow the composite hydrogel with great potential for practical wastewater treatment.

Regulation of interlayer channels of graphene oxide nanosheets in ultra-thin Pebax mixed-matrix membranes for CO_(2) capture

For the application of carbon capture by membrane process,it is crucial to develop a highly permeable CO_(2)-selective membrane.In this work,we reported an ultra-thin polyether-block-amide(Pebax)mixedmatrix membranes(MMMs)incorporated by graphene oxide(GO),in which the interlayer channels were regulated to optimize the CO_(2)/N_(2) separation performance.Various membrane preparation conditions were systematically investigated on the influence of the membrane structure and separation performance,including the lateral size of GO nanosheets,GO loading,thermal reduction temperature,and time.The results demonstrated that the precisely regulated interlayer channel of GO nanosheets can rapidly provide CO_(2)-selective transport channels due to the synergetic effects of size sieving and preferential adsorption.The GO/Pebax ultra-thin MMMs exhibited CO_(2)/N_(2) selectivity of 72 and CO_(2) permeance of 400 GPU(1 GPU=106 cm^(3)(STP)·cm^(2)·s^(-1)·cmHg^(-1)),providing a promising candidate for CO_(2) capture.

Fabrication of a novel electrochemical sensor based on MnFe_(2)O_(4)/graphene modified glassy carbon electrode for the sensitive detection of bisphenol A

Manganese ferrite(MnFe_(2)O_(4))has the advantages of simple preparation,high resistivity,and high crystal symmetry.Herein,we have developed an electrochemical sensor utilizing graphene and MnFe_(2)O_(4) nanocomposites modified glassy carbon electrode(GCE),which is very efficient and sensitive to detect bisphenol A(BPA).MnFe_(2)O_(4)/graphene(GR)was synthesized by immobilizing the MnFe_(2)O_(4) microspheres on the graphene nanosheets via a simple one-pot solvothermal method.The morphology and structure of the MnFe_(2)O_(4)/GR nanocomposite have been characterized through scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FT-IR),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).In addition,electrochemical properties of the modified materials are comparably explored by means of cyclic voltammetry(CV),electrochemical impedance spectroscopy(EIS)and differential pulse voltammetry(DPV).Under the optimal conditions,the proposed electrochemical sensor for the detection of BPA has a linear range of 0.8-400μmol/L and a detection limit of 0.0235μmol/L(S/N=3)with high sensitivity,good selectivity and high stability.In addition,the proposed sensor was used to measure the content of BPA in real water samples with a recovery rate of 97.94%-104.56%.At present,the synthesis of MnFe_(2)O_(4)/GR provides more opportunities for the electrochemical detection of BPA in practical applications.

MnFe_(2)O_(4)/graphene的制备及其超级电容性能

采用水热法制备了MnFe_(2)O_(4)/石墨烯(MFO/graphene)复合材料。利用XRD、SEM、EDS、循环伏安、计时电位等手段对MFO/graphene的物理与化学性能进行了表征。结果表明:产物为直径约100 nm的MFO颗粒均匀分布于graphene的片层上;MFO/graphene复合材料在3M KOH溶液中表现较好的超级电容特性。由于graphene的引入,提高了MFO材料导电性,进而改善了复合材料的电化学性能,MFO/graphene电极材料在1 A·g^(-1)的电流密度下展现出600 F·g^(-1)的比容量,与MFO相比,比电容提高了近47.1%。

Reduced graphene oxide aerogel decorated with Mo_(2)C nanoparticles toward multifunctional properties of hydrophobicity,thermal insulation and microwave absorption

Reduced graphene oxide(rGO)aerogels are emerging as very attractive scaffolds for high-performance electromagnetic wave absorption materials(EWAMs)due to their intrinsic conductive networks and intricate interior microstructure,as well as good compatibility with other electromagnetic(EM)components.Herein,we realized the decoration of rGO aerogel with Mo_(2)C nanoparticles by sequential hydrothermal assembly,freeze-drying,and high-temperature pyrolysis.Results show that Mo_(2)C nanoparticle loading can be easily controlled by the ammonium molybdate to glucose molar ratio.The hydrophobicity and thermal insulation of the rGO aerogel are effectively improved upon the introduction of Mo_(2)C nanoparticles,and more importantly,these nanoparticles regulate the EM properties of the rGO aerogel to a large extent.Although more Mo_(2)C nanoparticles may decrease the overall attenuation ability of the rGO aerogel,they bring much better impedance matching.At a molar ratio of 1:1,a desirable balance between attenuation ability and impedance matching is observed.In this context,the Mo_(2)C/r GO aerogel displays strong reflection loss and broad response bandwidth,even with a small applied thickness(1.7 mm)and low filler loading(9.0wt%).The positive effects of Mo_(2)C nanoparticles on multifunctional properties may render Mo_(2)C/r GO aerogels promising candidates for high-performance EWAMs under harsh conditions.

Mixed‑Dimensional Assembly Strategy to Construct Reduced Graphene Oxide/Carbon Foams Heterostructures for Microwave Absorption,Anti‑Corrosion and Thermal Insulation

Considering the serious electromagnetic wave(EMW)pollution problems and complex application condition,there is a pressing need to amalgamate multiple functionalities within a single substance.However,the effective integration of diverse functions into designed EMW absorption materials still faces the huge challenges.Herein,reduced graphene oxide/carbon foams(RGO/CFs)with two-dimensional/three-dimensional(2D/3D)van der Waals(vdWs)heterostructures were meticulously engineered and synthesized utilizing an efficient methodology involving freeze-drying,immersing absorption,secondary freeze-drying,followed by carbonization treatment.Thanks to their excellent linkage effect of amplified dielectric loss and optimized impedance matching,the designed 2D/3D RGO/CFs vdWs heterostructures demonstrated commendable EMW absorption performances,achieving a broad absorption bandwidth of 6.2 GHz and a reflection loss of-50.58 dB with the low matching thicknesses.Furthermore,the obtained 2D/3D RGO/CFs vdWs heterostructures also displayed the significant radar stealth properties,good corrosion resistance performances as well as outstanding thermal insulation capabilities,displaying the great potential in complex and variable environments.Accordingly,this work not only demonstrated a straightforward method for fabricating 2D/3D vdWs heterostructures,but also outlined a powerful mixeddimensional assembly strategy for engineering multifunctional foams for electromagnetic protection,aerospace and other complex conditions.

Enabling High-Performance Sodium Battery Anodes by Complete Reduction of Graphene Oxide and Cooperative In-Situ Crystallization of Ultrafine SnO_(2)Nanocrystals

The main bottleneck against industrial utilization of sodium ion batteries(SIBs)is the lack of high-capacity electrodes to rival those of the benchmark lithium ion batteries(LIBs).Here in this work,we have developed an economical method for in situ fabrication of nanocomposites made of crystalline few-layer graphene sheets loaded with ultrafine SnO_(2)nanocrystals,using short exposure of microwave to xerogel of graphene oxide(GO)and tin tetrachloride containing minute catalyzing dispersoids of chemically reduced GO(RGO).The resultant nanocomposites(SnO_(2)@MWG)enabled significantly quickened redox processes as SIB anode,which led to remarkable full anode-specific capacity reaching 538 mAh g^(−1)at 0.05 A g^(−1)(about 1.45 times of the theoretical capacity of graphite for the LIB),in addition to outstanding rate performance over prolonged charge–discharge cycling.Anodes based on the optimized SnO_(2)@MWG delivered stable performance over 2000 cycles even at a high current density of 5 A g^(−1),and capacity retention of over 70.4%was maintained at a high areal loading of 3.4 mg cm^(−2),highly desirable for high energy density SIBs to rival the current benchmark LIBs.

Graphene-based electrodes and catalysts for electroreduction of CO_(2)to low-carbon alcohols

The electrochemical reduction of CO_(2)(CO_(2)ER)into the renewable and sustainable green fuels,such as low-carbon alcohols,is one of several workable strategies.CO_(2)ER can be combined with renewable electricity to transform intermittent energy sources(such as wind,hydro,and solar)into a fuel that can be stored until it is ready to be used.The intrinsic characteristics of the employed catalyst have a significant and substantial effect on the efficiency of CO_(2)ER and the ensuing economic viability.The paradigmatic multicarbon alcohol catalysts should increase the concentration of*CO in the reaction environment,stabilize the key intermediate products during the reaction,and facilitate the C-C coupling interaction.Since graphene has a large surface area and exceptional conductivity,it has been used as a support for active phases(nanoparticles or nanosheets).It is possible for graphene to enhance charge transport and accelerate CO_(2)conversion through its electronic and structural coupling effects.At the interface,a synergy can be produced that improves CO_(2)ER by increasing*CO adsorption,intermediate binding,and stability.This article focuses on recent advancements in graphene-based catalysts that promote CO_(2)ER to alcohols.Likewise,this paper also describes and discusses the key role graphene plays in catalyzing CO_(2)ER into alcohols.Finally,we hope to provide future ideas for the design of graphene-based electrocatalysts.

Graphene/ZrO_2复合陶瓷材料的热导性能研究

采用3Y-ZrO_2粉体和石墨烯(Graphene)为原料,利用放电等离子体烧结技术(SPS),烧结制备了Graphene/ZrO_2复合陶瓷材料。利用SEM、HRTEM、XRD、激光热导仪等研究了烧结温度和石墨烯含量对Graphene/ZrO_2复合陶瓷材料的显微结构、物相和热传导性能的影响。研究结果表明,引入石墨烯不但可以抑制ZrO_2晶粒的生长,而且对复合材料的热传导性有着显著的影响;相对于单相ZrO_2陶瓷,随着石墨烯的引入,Graphene/ZrO_2复合陶瓷材料扩散系数反而降低,其原因可以归结于三个方面:首先,石墨烯含量比较低(0.5~1.5wt%),其次,石墨烯与Zr O晶粒界面处产生的强声子散射作用导致热导下降,最后是Graphene/ZrO_2复合陶瓷材料没有完全致密。

锂离子负极材料NiFe_2O_4/Graphene复合材料的制备和电化学性能

通过水热法合成了NiFe2O4/Graphene纳米复合材料,采用XRD和SEM对其晶相结构和形貌进行了表征,并将其作为锂离子电池活性材料组装成模拟电池,考查电化学性能。结果表明NiFe2O4/Graphene复合材料在100mA/g的电流密度下首次放电容量达970mAh/g,循环20次后,容量保持在668mAh/g,相比纯的NiFe2O4,具有较好的循环稳定性,这种优异的电化学性能归因于复合材料的纳米结构和NiFe2O4与Graphene的协同作用。

Sb_(2)S_(3)/石墨烯负极材料的制备及其储钠性能研究

钠离子电池(sodium-ion batteries,SIBs)具有成本低的潜在优势,有望成为替代锂离子电池(lithium ion batteries,LIBs)的储能设备。为提升钠离子电池的性能,开发出适应钠离子脱嵌的负极材料尤为重要。硫化锑(Sb_(2)S_(3))因其理论比容量高被认为是较好的钠离子电池负极材料。本文使用简单水热法将Sb_(2)S_(3)与石墨烯复合,制备Sb_(2)S_(3)/石墨烯复合材料(Sb_(2)S_(3)/Gr)。结果表明:Sb_(2)S_(3)/Gr作为钠离子电池负极时,不仅表现出良好的电导率(3.5×10~(-3)S/cm)和钠离子扩散速率(4.853×10~(-13)cm~2/s),而且在0.5 A/g的电流密度下,首圈库伦效率为76.27%,经150次循环后的比容量稳定在488 m A·h/g,表现出较高的比容量。Sb_(2)S_(3)/Gr复合材料表现出了极大的应用潜力,为高性能钠离子电池负极材料的研发提供了一定的参考价值。

ZIF-8@GO复合材料的合成及其对CO_(2)吸附性能

化石燃料燃烧排放的CO_(2)造成温室效应日趋严重,开发具有对CO_(2)高吸附性能的吸附剂至关重要.而金属-有机框架材料(MOFs)和氧化石墨烯(GO)作为新型吸附剂,仍存在对CO_(2)吸附性能低的问题.采用溶剂热法制备ZIF-8@GO材料,利用XRD、SEM、BET等表征手段,研究了ZIF-8@GO材料的微观结构及其对CO_(2)吸附性能.研究表明:ZIF-8@GO保持了ZIF-8的晶型结构,GO主要对ZIF-8起到尺寸调控和结构导向作用.气体吸附分离测试表明,ZIF-8@GO材料与ZIF-8材料相同,均是以微孔占据孔隙主导地位的材料;当GO参与复合比例为8%时,ZIF-8@GO(8%)材料的BET和Langmuir比表面积分别为1037.18、1115.90 m^(2)/g,对CO_(2)吸附量为34.347 cm^(3)/g,较母体ZIF-8材料对CO_(2)吸附量提高了32.3%.

Graphene Quantum Dot‑Mediated Atom‑Layer Semiconductor Electrocatalyst for Hydrogen Evolution

The hydrogen evolution reaction performance of semiconducting 2H-phase molybdenum disulfide(2H-MoS_(2))presents a significant hurdle in realizing its full potential applications.Here,we utilize theoretical calculations to predict possible functionalized graphene quantum dots(GQDs),which can enhance HER activity of bulk MoS_(2).Subsequently,we design a functionalized GQD-induced in-situ bottom-up strategy to fabricate near atom-layer 2H-MoS_(2) nanosheets mediated with GQDs(ALQD)by modulating the concentration of electron withdrawing/donating functional groups.Experimental results reveal that the introduction of a series of functionalized GQDs during the synthesis of ALQD plays a crucial role.Notably,the higher the concentration and strength of electron-withdrawing functional groups on GQDs,the thinner and more active the resulting ALQD are.Remarkably,the synthesized near atom-layer ALQD-SO_(3)demonstrate significantly improved HER performance.Our GQD-induced strategy provides a simple and efficient approach for expanding the catalytic application of MoS_(2).Furthermore,it holds substantial potential for developing nanosheets in other transition-metal dichalcogenide materials.

Porous heterostructure of graphene/hexagonal boron nitride as an efficient electrocatalyst for hydrogen peroxide generation

Compared with the traditional heteroatom doping,employing heterostructure is a new modulating approach for carbon-based electrocatalysts.Herein,a facile ball milling-assisted route is proposed to synthesize porous carbon materials composed of abundant graphene/hexagonal boron nitride(G/h-BN)heterostructures.Metal Ni powder and nanoscale h-BN sheets are used as a catalytic substrate/hard template and“nucleation seed”for the formation of the heterostructure,respectively.As-prepared G/h-BN heterostructures exhibit enhanced electrocatalytic activity toward H_(2)O_(2) generation with 86%-95%selectivity at the range of 0.45-0.75 V versus reversible hydrogen electrode(RHE)and a positive onset potential of 0.79 versus RHE(defined at a ring current density of 0.3 mA cm^(-2))in the alkaline solution.In a flow cell,G/h-BN heterostructured electrocatalyst has a H_(2)O_(2) production rate of up to 762 mmol g_(catalyst)^(-1) h^(-1) and Faradaic efficiency of over 75%during 12 h testing,superior to the reported carbon-based electrocatalysts.The density functional theory simulation suggests that the B atoms at the interface of the G/h-BN heterostructure are the key active sites.This research provides a new route to activate carbon catalysts toward highly active and selective O_(2)-to-H_(2)O_(2) conversion.

TiO_(2)/石墨烯基复合材料的制备及光催化降解染料研究

采用改进Hummers法制备氧化石墨烯(GO)和水解法制备的TiO_(2)及溶剂热法制备了还原氧化石墨烯(rGO)和一系列不同浓度的rGO/TiO_(2)纳米复合材料(0、5%、10%、15%、20%质量分数),并对合成产物进行SEM、XRD、XPS、DRS、Raman等表征,研究不同实验条件下纯TiO_(2)和rGO/TiO_(2)复合催化剂对亚甲基蓝染液(MB)的降解效果。结果表明,复合光催化剂中TiO_(2)主要为锐钛矿相,溶剂热合成引入的还原氧化石墨烯(rGO)对TiO_(2)的物相没有产生影响,rGO的引入使得rGO/TiO_(2)吸收带发生一定红移,TiO_(2)禁带宽度由3.23降低至3.09 eV;合成的(15%质量分数)rGO/TiO_(2)具有最佳的光催化效果,光催化活性最高,在100 W高压汞灯照射下70 min对20 mg/L的亚甲基蓝染料的降解率达97.6%;在500 W氙灯光源下照射70 min对20 mg/L亚甲基蓝染料的降解率达到93.2%,(15%质量分数)rGO/TiO_(2)复合光催化剂具有良好的光催化降解性及循环稳定性,5次循环光催化降解后,rGO/TiO_(2)有86.1%的降解效率。表现出了优异的吸附和光催化性能,这可为光催化处理废液提供了一种有效的方法。

γ-MnO2 nanorods/graphene composite as efficient cathode for advanced rechargeable aqueous zinc-ion battery

Aqueous Zn//MnO2 batteries are emerging as promising large-scale energy storage devices owing to their cost-effectiveness,high safety,high output voltage,and energy density.However,the MnO2 cathode suffers from intrinsically poor rate performance and rapid capacity deterioration.Here,we remove the roadblock by compositing MnO2 nanorods with highly conductive graphene,which remarkably enhances the electrochemical properties of the MnO2 cathode.Benefiting from the boosted electric conductivity and ion diffusion rate as well as the structural protection of graphene,the Zn//MnO2-graphene battery presents an admirable capacity of 301 mAh g^-1 at 0.5 A g^-1,corresponding to a high energy density of 411.6 Wh kg^-1.Even at a high current density of 10 A g^-1,a decent capacity of 95.8 mAh g^-1 is still obtained,manifesting its excellent rate property.Furthermore,an impressive power density of 15 kW kg^-1 is achieved by the Zn//MnO2-graphene battery.

具有增强光催化和抗菌活性的TiO_(2)@Ag-GO复合材料

光催化降解环境中的污染物被认为一种理想的清洁方法,其中二氧化钛(TiO_(2))是目前最有前途的光催化材料之一。但由于能带宽、光生电子与空穴快速复合等特点,限制了其利用效率和范围,开发一种高效的TiO_(2)基光催化复合材料具有重要意义。通过简单的溶胶-凝胶法和一步Marangoni法,将TiO_(2)和Ag纳米颗粒(AgNPs)和氧化石墨烯(GO)有效结合,制备出显著增强光催化活性和抗菌能力的复合材料TiO_(2)@Ag-GO。氧化石墨烯(GO)具有多个催化活性中心,可以高效地进行光催化反应降解污染物。同时,还能提高电荷分离程度,抑制光生电子和空穴复合,提高TiO_(2)光催化活性。AgNPs具有存储电子和促进电荷分离的能力,同时释放的Ag+,赋予材料广谱的抗菌性能。光催化试验抑菌试验结果表明,复合材料能高效降解亚甲基蓝染料,2 h降解率达到74.5%,同时对金黄色葡萄球菌和铜绿杆菌有较强的杀灭作用。这种简易制备的高催化和杀菌功能的TiO_(2)基复合材料在光催化清洁领域有很大的应用潜力。

Designing N-doped graphene/ReSe_(2)/Ti_(3)C_(2) MXene heterostructure frameworks as promising anodes for high-rate potassium-ion batteries

Developing high-performance anodes for potassium ion batteries(KIBs) is of paramount significance but remains challenging.In the normal sense,electrode materials are prepared by ubiquitous wet chemical routes,which otherwise might not be versatile enough to create desired heterostructures and/or form clean interfacial areas for fast transport of K-ions and electrons.Along this line,rate capability/cycling stability of resulting KIBs are greatly handicapped.Herein we present an all-chemical vapor deposition approach to harness the direct synthesis of nitrogen-doped graphene(NG)/rhenium diselenide(ReSe_2)hybrids over three-dimensional MXene supports as superior heterostructure anode material for KIBs.In such an innovative design,1 T'-ReSe2 nanoparticles are sandwiched in between the NG coatings and MXene frameworks via strong interfacial interactions,thereby affording facile K~+ diffusion,enhancing overall conductivity,boosting high-power performance and reinforcing structural stability of electrodes.Thus-constructed anode delivers an excellent rate performance of 138 mAh g^(-1) at 10.0 A g^(-1) and a high reversible capacity of 90 mAh g^(-1) at 5 A g^(-1) after 300 cycles.Furthermore,the potassium storage mechanism has been systematically probed by advanced in situlex situ characterization techniques in combination with first principles computations.