GALVANIC CORROSION BETWEEN GRAPHITE EPOXY COMPOSITE MATERIALS AND LY12CZ ALUMINUM ALLOY

The electrochemical approach was used to show the nature of the galvanic corrosion when graphite epoxy composite materials(GECM)were coupled to LY12CZ aluminum alloy. An open circuit potential difference of one volt was obtained in 3.5% NaCl solution between GECM and LY12CZ. Corrosion current data (zero impedance technique) indicated that there was serious corrosion at GECM/LY12CZ couple.When GECM/LY12CZ couples were exposed to ASTM salt spray and alternate immersion condition, fiber glass cloth and H06-2 epoxy primer paint were effective methods for preventing galvanic corrosion.The slow strain rate test (SSRT) showed that GECM increased the LY12CZ stress corrosion crack growth rate.

Effect of the graphitic degree of carbon supports on the catalytic performance of ammonia synthesis over Ba-Ru-K/HSGC catalyst

A series of high surface area graphitic carbon materials （HSGCs） were prepared by ball-milling method. Effect of the graphitic degree of HSGCs on the catalytic performance of Ba-Ru-K/HSGC-x （x is the ball-milling time in hour） catalysts was studied using ammonia synthesis as a probe reaction. The graphitic degree and pore structure of HSGC-x supports could be successfully tuned via the variation of ball-milling time. Ru nanoparticles of different Ba-Ru-K/HSGC-x catalysts are homogeneously distributed on the supports with the particle sizes ranging from 1.6 to 2.0 nm. The graphitic degree of the support is closely related to its facile electron transfer capability and so plays an important role in improving the intrinsic catalytic performance of Ba-Ru-K/HSGC-x catalyst.

Cross-Linked Hollow Graphitic Carbon as Low-Cost and High-Performance Anode for Potassium Ion Batteries

Large-scale and low-cost preparation of carbon-based potassium anode with long life and high capacity is one of the footstones for the development of potassium ion batteries(PIBs).Herein,a low-cost carbon-based material,cross-linked hollow graphitic carbon(HGC),is large scale synthesized to apply for PIBs anode.Its hollow structure can afford sufficient space to overcome the damage caused by the volume expansion of graphitic carbon(GC).While the cross-linked structure forms a compact interconnection network that allows electrons to rapid transfer between different GC frameworks.Electrochemical measurements demonstrated that the HGC anode exhibited low charge/discharge plateau(about 0.25 V and 0.1 V)and excellent specific capacity as high as 298 m A h g^(-1)at the current density of 50 m A g^(-1).And more important,after 200 cycles the capacity of HGC anode still shows 269 m A h g^(-1)(the decay rate of per cycle is only 0.048%).Meanwhile,the use of commercial traditional electrolyte(KPF_(6))and cheap raw materials that provide new hope for trying and realizing the large-scale production of PIBs based on carbon anode materials.

GALVANIC CORROSION AND PROTECTION OF GECM/LY12CZ COUPLES UNDER DIFFERENT ATMOSPHERIC EXPOSURE CONDITIONS

Galvanic, compatibility between graphite epoxy composite materials (GECM) and LY12CZ aluminum alloy was evaluated in different atmospheric corrosion environments and by laboratory electrochemical measurements. Open circuit potential electrochemical measurements showed a relatively large potential difference about 1 volt between the GECM and LY12CZ aluminum alloy, and this difference provided the driving force for galvanic corrosion of the LY12CZ aluminum alloy as an anode. Having been exposed for 1, 3 or 5 years in Beijing, Tuandao and Wanning station, GECM/LY12CZ couples showed significant losses of strength and elongation. Protective coatings and non-conductive barriers breaking the galvanic corrosion circuit were evaluated under the same atmospheric corrosive conditions. Epoxy primer paint, glass cloth barriers and LY12CZ anodizing were effective in galvanic corrosion control for GECM/LY12CZ couples.

Constructing mild expanded graphite microspheres by pressurized oxidation combined microwave treatment for enhanced lithium storage

The modified graphite anode materials have some prominent advantages over other anode materials in the industrial applications.A novel simple and gentle method is proposed to synthesize the mild expanded graphite microspheres(MEGMs) from flake graphite spheres through a combined modified pressurized oxidation combined with the microwave treatment.The microstructural results demonstrate that moderately expanded MEGMs with an expansion volume between 4 and 10 ml·g^(-1)exhibit a highly microporous structure with an enlarged interlayer spacing,a decreased microcrystalline size,as well as an increased number of functional groups on the surface,resulting in the increased storage sites and spaces for lithium ions and the enhanced diffusion rate of lithium ions.When used as the anode material for lithium-ion batteries,the MEGM-T75t30 obtained by oxidation treatment at 75℃ for 30 min followed by microwave irradiation for expansion displays a high reversible capacity of 446.7 mAh·g^(-1) at 100 mA·g^(-1) after 100 cycles and excellent rate performance(330 and 116 mAh·g^(-1) at 800 and 3200 mA·g^(-1),respectively).Therefore,the MEGMs prepared by this convenient and mild method show excellent electrochemical properties and good application potential.

Electronic structure and mechanical properties of layered compound YB_2C_2:A promising precursor for making two dimensional(2D) B_2C_2 nets

Layered compounds play pivotal roles as precursors for producing 2D materials through mechanical exfoliation(micro-mechanical cleavage) or chemical approaches. Therefore, searching for layered compounds with sharp anisotropic chemical bonding and properties becomes emergent. In this work, the stability, electronic structure, elastic properties, and lattice dynamics of YBCwere investigated. Strong anisotropy in elastic properties is revealed, i.e., high Young’s modulus in a-b plane but low Young’s modulus in c direction. The maximum to minimum Young’s modulus ratio is 2.41 and 2.45 for YBCwith P42/mmc and P4/mbm symmetry, respectively. The most likely systems for shear sliding or microdelaminating are(001)[100] and(001)[010]. The anisotropic elastic properties are underpinned by the anisotropic chemical bonding, i.e., strong bonding within the BCnets and weak bonding between Y atom layers and BCnets. YBCis electrically conductive and the contributions to the electrical conductivity are from delocalized Y 4deas well as Bpandpzelectrons. The layered crystal structure, sharp anisotropic mechanical properties, and metallic conductivity endorse YBCpromising as a precursor for new 2D BCnets.

Design and preparation of gradient graphite/cermets self-lubricating composites

Based on the functionally graded materials （FGMs） design concept, the laminated-graded graphite/cermets self-lubricating composite was prepared to achieve the integration of mechanical prop- erties and lubrication performance of the cermet. The effects of the layer number and thickness of graded structure on residual stresses in the gradient composites were investigated by finite element method （FEM）. From the FEM analyses, the optimal gradient structure design was obtained correspond- ing to the following parameters： the number of graded layers n = 2 and the thickness of graded structure t = I ram. According to the optimum design, a graded graphite/cermets self-lubricating material with two layers was fabricated by a typical powder metallurgy technique. Compared with the homogenous graphite/cermets composite, the surface hardness and indentation fracture toughness of graded compos- ite were increased by approximately 15.9% and 6.3%, respectively. The results of X-ray diffraction （XRD） stress measurement identified the existence of residual compressive stress on the surface of graded com- posite. Additionally, the friction and wear tests revealed that the wear resistance of the graphite/cermets self-lubricating composite was improved significantly via the graded structural design, whereas the coefficient of friction changed slightly.