A modified phase diversity wavefront sensor with a diffraction grating

The phase diversity wavefront sensor is one of the tools used to estimate wavefront aberration, and it is often used as a wavefront sensor in adaptive optics systems. However, the performance of the traditional phase diversity wavefront sensor is limited by the accuracy and dynamic ranges of the intensity distribution at the focus and defocus positions of the CCD camera. In this paper, a modified phase diversity wavefront sensor based on a diffraction grating is proposed to improve the ability to measure the wavefront aberration with larger amplitude and higher spatial frequency. The basic principle and the optics construction of the proposed method are also described in detail. The noise propagation property of the proposed method is also analysed by using the numerical simulation method, and comparison between the diffraction grating phase diversity wavefront sensor and the traditional phase diversity wavefront sensor is also made. The simulation results show that the diffraction grating phase diversity wavefront sensor can obviously improve the ability to measure the wavefront aberration, especially the wavefront aberration with larger amplitude and higher spatial frequency.

Analysis and Prediction of Effect of Turning Marks Diffraction on Image Quality of Optical System

Single-point diamond turning (SPDT) is widely used in the machining of infrared materials and metal-based mirrors. Diamond tips can scratch material, replicate the shape of the tip, and create annular turning marks on optical surfaces, which can have unpredictable adverse effects on imaging. In order to predict the effect of turning marks diffraction on the degradation of imaging quality, a model of the influence of SPDT processing parameters on the reduction of system imaging MTF under the influence of ideal grating turning marks diffraction was established. The results show that the depth of the turning mark will lead to the decline of MTF, especially the low frequency information. Finally, a method is proposed to reduce the effect of turning marks diffraction through changing the processing parameters. .

Detecting High-Refractive-Index Media Using Surface Plasmon Sensor with One-Dimensional Metal Diffraction Grating

We experimentally detect high-refractive-index media (n > 1.5) using a surface plasmon resonance (SPR) sensor with a diffraction grating. While SPR sensors are generally based on the attenuated total reflection method using metal films, here, we focus on a method using a diffraction grating, which can detect relatively higher refractive-index media and is suitable for device miniaturization. In this study, we used the rigorous coupled-wave analysis method to simulate the dependence of the reflectance on an incident angle for media with refractive index values up to 1.700. In the experiment, a medium (n = 1.660 - 1.700) was successfully detected using this grating. Under the conditions of the grating (period: 600 nm, Au thickness: 40 nm) using a red laser (λ: 635 nm), a sharp decline in the reflectance and a rise in the transmittance at certain angles were confirmed, demonstrating the extraordinary transmission enabled by SPR. Because excitation angles changed with changes in the refractive index, we concluded that this method can be applied to sensors that detect high-refractive-index media.

A novel single-order diffraction grating: Random position rectangle grating

Spectral diagnosis of radiation from laser plasma interaction and monochromation of radiation source are hot and important topics recently. Grating is one of the primary optical elements to do this job. Although easy to fabricate, traditional diffraction grating suffers from multi-order diffraction contamination. On the other hand, sinusoidal amplitude grating has the nonharmonic diffraction property, but it is too difficult to fabricate, especially for x-ray application. A novel nonharmonic diffraction grating named random position rectangle grating（RPRG） is proposed in this paper. Theoretical analysis and experiment results show that the RPRG is both higher order diffraction suppressing and not difficult to fabricate. Additionally, it is highly efficient; its first order absolute theoretical diffraction efficiency reaches 4.1%. Our result shows that RPRG is a novel tool for radiation diagnosis and monochromation.

Diffraction of an ultrashort pulsed beam with arbitrary polarization state from a volume holographic grating in LiNbO3 crystals

Based on a modified coupled wave theory of Kogelnik, we have studied the diffraction of an ultrashort pulsed beam with an arbitrary polarization state from a volume holographic grating in photorefractive LiNbO3 crystals. The results indicate that the diffracted intensity distributions in the spectral and temporal domains and the diffraction efficiency of the grating are both changed by the polarization state and spectral bandwidth of the input pulsed beam. A method is given of choosing the grating parameters and input conditions to obtain a large variation range of the spectral bandwidth of the diffracted pulsed beam with an appropriate diffraction efficiency. Our study presents a possibility of using a volume holographic grating recorded in anisotropic materials to shape a broadband ultrashort pulsed beam by modulating its polarization state.

Analysis of restriction factors of widening diffraction bandwidth of multilayer dielectric grating

In order to design a multilayer dielectric grating with wide-bandwidth diffraction spectrum, the restriction factors of both the reflection bandwidth of multilayer dielectric high-reflectivity mirror and the guided-mode resonance phe- nomenon are studied in detail. The reflection characteristics of high-reflectivity mirror in zeroth and -lst transmitted diffraction orders are quantitatively evaluated. It is found that the reflection bandwidth of high-reflectivity mirror in -lst transmitted diffraction order, which determines the final diffraction bandwidth of multilayer dielectric grating, is evidently compressed. Furthermore, it is demonstrated that the reducing of grating period is an effective approach to the elimination of guided mode resonance over a required broad band range both spectrally and angularly. In addition, the expressions for calculating the maximum period ensuring no guided mode resonance in the required bandwidth are derived. Finally, two high-efficiency pulse-compression gratings with broad-band are presented.

Diffraction Pattern of a Rotated Grating

Diffraction patterns of a rotated grating are investigated from both theoretical and experimental points of view. It is shown that as the grating rotates, the angle of deviation of each diffracted line relative to the incident light goes through a minimum, and that the angle between any two successive diffracted lines goes through a minimum value which is the same for all adjacent diffracted lines. It is also shown that the angle between diffraction lines with n=1 and n=-1 is not sensitive to small variations of the grating from being normal to the incident light. Finally, a method is suggested for determining the line distance of a diffraction grating with high accuracy.

Bragg-Angle Diffraction in Slant Gratings Fabricated by Single-Beam Interference Lithography

A single-beam interference-lithography scheme is demonstrated for the fabrication of large-area slant gratings, which requires exposure of the photoresist thin film spin-coated on a glass plate with polished side-walls to a single laser beam in the ultraviolet and requires small coherence length of the laser. No additional beam splitting scheme and no adjustments for laser-beam overlapping and for optical path-length balancing are needed. Bragg-angle diffractions are observed as strong optical extinction that is tunable with changing the angle of incidence. This device is important for the design of efficient filters, beam splitters, and photonic devices.

Study of transmission grating diffraction efficiencies for soft X-ray

Tansmission grating spectrometers are extensively used to measure absthlute X-ray spectra in a photon-energy range below 1000 eV. The transmission grating,as its dispersive element, must be calibrated to obtain its danaction efficiencies. Calibrations of absolute distraction efficiencies of the tlansmission grating at photon energyof 844eV have been carried out on Beliing Synchrotron mediation Facility. With theaid of grating model, all of the grating structure paraxneters have been determinedand the absolute dchaction efficiencies in a photon-energy range below 2000eV havealso been calculated and discussed.

Optical diffraction gratings embedded in BK-7 glass by low-density plasma formation using femtosecond laser

The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond (130 fs) Ti: sapphire laser (λp=790 nm). The refractive index modifications with diameters ranging from 400 nm to 4 μm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 1×1013 W/cm2. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which low-density plasma occurred. The maximum refractive index change (Δn) was estimated to be 1.5×10-2. Several optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.

Asymmetric two-dimensional diffraction grating via a vortex field in an inverted-Ytype atomic system

We propose a theoretical scheme to realize a two-dimensional(2D)diffraction grating in a four-level inverted-Y-type atomic system coupled by a standing-wave(SW)field and a Laguerre-Gaussian(LG)vortex field.Owing to asymmetric spatial modulation of the LG vortex field,the incident probe field can be lopsidedly diffracted into four domains and an asymmetric 2D electromagnetically induced grating is created.By adjusting the detunings of the probe field and the LG vortex field,the intensities of the LG vortex field and the coherent SW field,as well as the interaction length,the diffraction properties and efficiency,can be effectively manipulated.In addition,the effect of the azimuthal parameter on the Fraunhofer diffraction of the probe field is also discussed.This asymmetric 2D diffraction grating scheme may provide a versatile platform for designing quantum devices that require asymmetric light transmission.

Self-diffractionin Porous Silicon/PMMA-DR1 Composite Fil ms

Two-layer structure consisting of PS/PMMA-DR1 composite film planar waveguide layer on porous silicon cladding layer was fabricated in our experiment. The induced grating based on the third nonlinear optical properties was formed by interaction of two Nd∶YAG laser beams at 1064nm in the porous silicon/PMMA-DR1 waveguide. The diffraction efficiency of the first order diffracted light is measured to be about 0.2% of the total output.

Single order soft X-ray diffraction with quasi-random radius pinhole array spectroscopic photon sieves

A novel single order diffraction grating in the soft X-ray region, called quasi-random radius pinhole array spectro- scopic photon sieves （QRSPS）, is proposed in this paper. This new grating is composed of pinholes on a substrate, whose radii are quasi-random, while their centers are regular. Analysis proves that its transmittance function across the grating bar is similar to that of sinusoidal transmission gratings. Simulation results show that the QRSPS can suppress higher-order diffraction effectively. And the QRSPS would still retain its characteristic of single order diffraction when we take the effect of X-ray penetration into account. These properties indicate that the QRSPS can be used in the soft X-ray spectra measurement.

OPTICAL STORAGE MECHANISM AND HIGH-ORDER DIFFRACTION PROPERTIES OF NITROAZOBENZENE-CONTAINING POLYESTER FILMS

Using Nd:YAG second harmonic pulse (100 ps), the optical storage properties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] and poly [2'-chloro-4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] have been studied by multiwave mixing. The high-order diffractions of the orientation gratings induced by anisotropy via the reorientation of nitroazobenzene groups and optical information storage with long-term stability have been realized by multiwave mixing in their films. Up to 3rd order forward diffraction was detected in two wave mixing, while up to 4th order backward diffraction was observed in degenerated four wave mixing. The recording mechanism was explained by the trans-cis-trans isomerization cycles of azobenzene groups. The isomerization of these azobenzene groups probably undergoes with inversion mechanism under the experimental conditions. The information recorded in these films has been kept for more than 6 months.

High-efficiency asymmetric diffraction based on PT-antisymmetry in quantum dot molecules

We present preparation of asymmetric grating with higher diffraction efficiency in quantum dot molecules by combining the tunneling effect and parity-time antisymmetry.In the presence of tunneling between two quantum dots,the system exhibits the striking PT antisymmetry via spatially modulating the driving field and the detuning with respect to the driven transition.For this reason,the asymmetric grating could be achieved.The results show that the diffraction efficiency can be adjustable via changing the driving intensity,detuning,tunneling strength,and interaction length,and then the high-order diffraction can be reached.The scheme provides a feasible way to obtain the direction-controlled diffraction grating,which can be helpful for optical information processing and realization of controllable optical self-image.

The Use of Light Diffracted from Grating Etched onto the Backside Surface of an Atomic Force Microscope Cantilever Increases the Force Sensitivity

A reflecting diffraction grating has been etched onto the backside of a standard cantilever for atomic force microscopy, and the diffracted light has been used to monitor the angular position of the cantilever. It is shown experimentally that for small angles of incidence and for large reflection angles, the force sensitivity can be improved by few times when an appropriate detection scheme based on the position sensitive (duolateral) detector is used. The first demonstration was performed with a one micron period amplitude diffraction grating onto the backside of an Al-coated cantilever etched by a focused ion beam milling for the experiments in air and an analogous 600 nm-period grating for the experiments in air and in water.

The Design and Manufacturing of Diffraction Optical Elements to form a Dot-Composed Etalon Image within the Optical Systems

The possibilities of manufacturing of diffraction optical elements (DOE), using the “Caroline 15 PE” plasma-etching machine were considered. It is established that at thickness of chromic mask of 100 nm the plasma-chemical etching (PCE) method reaches depth of surface micro-profile to 1.4 μm on optical glass. It allows increasing the diffraction efficiency of DOE to 0.3 - 0.35 on the second order of diffraction.

基于矢量衍射理论的光栅干涉仪位移测量误差研究

光栅干涉仪位移测量系统作为测量领域中最精密的测量仪器之一,由于在测量过程中光栅的姿态位置无法保证完美装配,使得光栅的光栅矢量方向与运动矢量方向之间出现偏差,导致位移测量结果出现周期性非线性误差。文中针对在光栅干涉仪位移测量过程中出现的光栅与位移台以及读数头之间的姿态位置误差进行分析,通过分别建立位移坐标系及光栅坐标系,参考惯性导航领域中飞行器姿态表示方法,利用一维光栅的横滚、俯仰和偏航角共同描述一维光栅相对于位移台的装配状态。通过基于矢量衍射理论分析光栅干涉仪位移测量时三个维度的角度偏差量,对可能产生的位移测量误差进行了分析说明。基于广义一维光栅方程,探究出了一个更为普遍的结论,为后续装置的改进提供理论依据,以提高系统的测量精度。

高边缘视场光学效率的衍射波导准直投影镜头设计

随着微型发光二极管(micro-light emitting diode,Micro-LED)微型图像源被应用于增强现实(augmented reality,AR)显示技术,AR显示系统朝着超小型化方向发展。然而Micro-LED图像源发光角度大,准直投影镜头要求体积小且像质高,其产生的渐晕现象也导致视场(field of view,FOV)边缘处光学效率低、照度不均匀,这对AR光学系统设计造成了挑战。为了解决上述问题,该文基于增加计算得到的非球面场镜,设计了一种照度均匀性高、边缘视场光学效率较高的衍射光栅波导准直投影镜头。对场镜理论进行详细分析,从而确定焦距区间,最终求解其面型参数,设计出照度相对均匀的镜头。设计的新型准直投影镜头对角线FOV为41.2°,F#为1.87,调制传递函数在125 lp/mm处大于0.5。仿真结果表明,系统照度均匀性相对提高了14%,边缘FOV的光学效率相对提高了15%,具有良好的成像性能,该镜头可应用于超小型AR衍射光栅波导头戴显示系统中。