Experimental Measurements of the Sensitivity of Fiber-optic Bragg Grating Sensors with a Soft Polymeric Coating under Mechanical Loading,Thermal and Magnetic under Cryogenic Conditions

The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.

Packaging Effects on Fiber Bragg Grating Sensor Performance

In this paper, the effects of packaging material and structure of fiber Bragg grating sensor performance are investigated. The effects of thermal expansion coefficient of different embedding materials on the temperature sensitivities of the FBG sensors are studied both theoretically and experimentally with good agreement, which provides a means for selection of FBG packaging material to achieve desired temperature sensitivity. We also demonstrate a 4-point bending structured FBG lateral force sensor that measures up to 242N force with well-preserved reflection spectrum, whereas for 3-point bending structure, multiple-peaks start to occur when applied force reaches 72N.

A Calibration Method Based on Linear InGaAs in Fiber Grating Sensors Interrogation System

In accordance with the characteristics of wavelength shift detection in fiber grating sensor interrogation system,the wavelength interrogation system which uses linear InGaAs as the spectrum receiver is proposed.Orientation of optic spectrum line affects the silt of volume phase grating and size of InGaAs photosensitive unit,thus the calibration method is needed.Based on an analysis of InGaAs imaging model,least square curve fitting method is proposed to detect spectrum wavelength and InGaAs photosensitive unit position.The experimental results show that the methods are effective and the demodulation system precision is improved.

Characteristics of Smart Concrete with Fiber Optical Bragg Grating Sensor

Based on the advantages of the fiber Bragg grating sensing technology,this paper presents a principle of a novel smart concrete with fiber optical Bragg grating sensor,analyses the theory and characteristics,illustrates the key technology and method to make the fiber Bragg grating sensor for the smart concrete,and proves the feasibility with experiments.The results indicate that the smart concrete with fiber Bragg grating sensors is feasible in the structure monitoring and damage diagnosing in the long run.

A Fiber-Optical Intrusion Alarm System Based on Quasi-Distributed Fiber Bragg Grating Sensors

A fiber-optical intrusion alarm system based on quasi-distributed fiber Bragg grating （FBG） sensors is demonstrated in this paper. The algorithms of empirical mode decomposition （EMD） and wavelet packet characteristic entropy are adopted to determine the intrusion location. The intrusion alarm software based on the Labview is developed, and it is also proved by the experiments. The results show that such a fiber-optical intrusion alarm system can offer the automatic intrusion alarm in real-time.

Resistance Spot Welding Method for Metal-Based Fiber Bragg Grating Sensors

Aiming at the requirements of installation and work environment of metal-based fiber Bragg grating(FBG)sensor,a resistance spot welding method is presented.Firstly,the effect of welding parameters on welding quality is discussed theoretically,and a suitable resistance spot welding method for the metal-based FBG sensor is proposed for the first time.Then through serial resistance spot welding tests,the feasibility and practicability of the method are verified,and optimal welding parameters for two different tested metals are obtained.Fatigue performance test validates FBG sensors installed by the proposed method with good fatigue properties and long-term stable measurement performance.The research results can provide technical guidance for engineering structure long-term safety monitoring.

Fiber Bragg Grating Sensor Array System Based on Digital Phase Generated Carrier Demodulation and Reference Compensation Method

A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.

The Design of Bending Long Period of Photonic Crystal Fiber Grating Sensors

The bending photonic crystal fiber grating sensor is an important role in underwater monitoring and fire alarm systems. It is studied that the resonant wavelength expression of bending long period photonic crystal fiber gratings is deduced, it is designed that a bending long period photonic crystal fiber grating sensor system, it is calculated in theory that between the bending long period photonic crystal fiber gratings sensor resonance wavelength and the grating period and the bending strain. The result is shown by calculating and analysing in theory, the grating curvature is increased by the increase of the bending strain of the grating, and the resonance wavelength of the grating sensor is drifted, the drift amount is increased, one in this grating, the drifted amount of the resonant wavelength is 0.014 nm.

Hybrid fiber Bragg grating sensor for vibration and temperature monitoring of a train bearing

We report a fiber Bragg grating（FBG）-based sensor for the simultaneous measurement of a train bearing’s vibration and temperature. A pre-stretched optical fiber with an FBG and a mass is designed for axial vibration sensing. Another multiplexed FBG is embedded in a selected copper-based alloy with a high thermal expansion to detect temperature. Experiments show that the sensor possesses a high resonant frequency of 970 Hz, an acceleration sensitivity of 27.28 pm/g, and a high temperature sensitivity of 35.165 pm/℃. A resonant excitation test is also carried out that demonstrates the robustness and reliability of the sensor.

Large Strain Detection of SRM Composite Shell Based on Fiber Bragg Grating Sensor

There may be more than 2% strain of carbon fiber composite material on solid rocket motor （SRM） in some extreme cases. A surface-bonded silica fiber Bragg grating （FBG） strain sensor coated by polymer is designed to detect the large strain of composite material. The strain transfer relation of the FBG large strain sensor is deduced, and the strain transfer mechanism is verified by finite element simulation. To calibrate the sensors, the tensile test is done by using the carbon fiber composite plate specimen attached to the designed strain sensor. The results show that the designed sensor can detect the strain more than 3%, the strain sensitivity is 0.0762pm/με, the resolution is 13.13με, and the fitting degree of the wavelength-strain curve fitting function is 0.9988. The accuracy and linearity of the sensor can meet the engineering requirements.

New Approach to the Strain Analysis of Bragg Grating Sensors

The response of an optical strain sensor based on the fiber Bragg grating is theoretically analyzed with a different approach of that found usually in the literature. In this model, geometrical changes suffered by the grating itself are taken into account. The results are compared with those from experiments, showing very good agreement.

Experimental study on cross-sensitivity of temperature and vibration of embedded fiber Bragg grating sensors

In view of the principle for occurrence of cross-sensitivity, a series of calibration experiments are carried out to solve the cross-sensitivity problem of embedded fiber Bragg gratings(FBGs) using the reference grating method. Moreover, an ultrasonic-vibration-assisted grinding(UVAG) model is established, and finite element analysis(FEA) is carried out under the monitoring environment of embedded temperature measurement system. In addition, the related temperature acquisition tests are set in accordance with requirements of the reference grating method. Finally, comparative analyses of the simulation and experimental results are performed, and it may be concluded that the reference grating method may be utilized to effectively solve the cross-sensitivity of embedded FBGs.

Interrogating a Fiber Bragg Grating Vibration Sensor by Narrow Line Width Light

A method to interrogate fiber Bragg grating vibration sensor by narrow line width light is demonstrated. The interrogation scheme takes advantage of the intensity modulation of narrow spectral bandwidth light, such as distributed feedback laser, when a reflection or transmission spectrum curve of an fiber Bragg grating （FBG） moves due to the strain which is applied on the sensor. The sensor＇s response to accelerating frequency and amplitude is measured by experiment. The factors which have impacts on the sensitivity of the interrogation system are also discussed.

New Demodulation System for Fiber Bragg Grating Sensor

The mechanism of measuring temperature and strain using FBG has been studied deeply, however , signal demodulation has not been thoroughly solved. A novel demodulation system using CCD and a temperature sensing system are designed.

Fiber Bragg Grating Sensor Network Optimization

This study introduces the optimization of the fiber Bragg grating （FBG） network and the load identification. Current researches on the optimal placement and reliability of the FBG network and the static load identification are generally analyzed. And then, the optimal placement of sensors and reliability of the FBG network are studied. Through the analysis of structural response characteristics, the general rules of sensors placement in structural static response parameters monitoring are proposed. The probability calculation is introduced, and the numerical analyses of the FBG sensor network reliability of several simple topologies are given.

Long-term performance of packaged fiber Bragg grating sensors for strain monitoring inside creep medium

To investigate the long-term performance of the packaged fiber Bragg grating(FBG)sensors embedded in civil infrastructure for strain monitoring,in this paper,the influence of host matrix’s creep effect on the behavior of the FBG sensors was systematically studied through theoretical,numerical,and experimental analysis.A theoretical strain transfer analysis between the optic fiber,packaging layer,and host matrix to consider the creep effect of the host matrix was performed accordingly for long-term strain monitoring.Parametric studies were carried out using numerical analysis for FBG sensors packaged with glass fiber reinforced plastic(GFRP),also known as FBG-GFRP sensors in concrete,as an example.The results show that embedded in a creep medium,an acceptable long-term performance of packaged FBG sensors requires the packaging layer to have a minimum length and maximum thickness.Laboratory long-term creep tests using epoxy resin and concrete as host matrix for FBG-GFRP sensors also clearly demonstrated that the influence of creep effect cannot be ignored for strain measurements if the host matrix has a creep potential and the developed correction model performed well to reduce measurement errors of such sensors in creep medium.

Use of fiber Bragg grating sensors for monitoring delamination damage propagation in glass-fiber reinforced composite structures

Embedded fiber Bragg grating（FBG）sensors have been widely used for damage monkoring of fiber composite structures for a few decades.However,many remaining engineering challenges have delayed FBG based in situ structural health monitoring（SHM）systems.One of the major problem associated with FBG based SHM system is the unavailability of reliable data processing algorithms.The present work details a study which has been undertaken for identification of delamination crack propagation in composite plate under fiber reinforced polymer（FRP）uniaxial loading.The strain measured by embedded FBG sensors closer to the crack tip was used to qualitatively and quantitatively analyze delamination damage propagation using recently proposed elasto-plastic model.Strain energy release rate was calculated and compared with the model prediction.The study has concluded that the delamination crack propagation in a FRP composite can be monitored successfully using an integral approach of FBG sensors measurements and the predictions of proposed elasto-plastic model.

COMPACT PHASE GRATING INTERFERENCE SENSOR FOR MICRO-DISPLACEMENT

On the basis of existing techniques, a compact micro-displacement sensor of phase grating interference （PGI） is described, which adopts cylindrical hologram diffraction grating as the calibration standard. The optical principle of the sensor is explained, and the relation between the grating motion displacement and the phase shift of interference stripes is deduced. The improvement of the integral structure and the method of photoelectric signal processing are described in detail. With the software system based on the virtual instrument development platform Labwindows/CVI and other hardwares such as the precision displacement worktable, the surfaces of typical parts are measured and the characterization results are given. The sensor has wide measuring range and high resolution, its sensitivity and resolution being independent of the wavelength of the incident light. The vertical measuring range is 0-6 mm, and the vertical resolution is 0.005μm. The experimental results show that the sensor can be used to measure and characterize the surface topography parameters of the plane and curved surface.

Magneto-Optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

Magneto-optic fiber Bragg gratings （MFBG） based on magneto-optic materials have a lot of potential applications for sensing and optical signal processing. The transmission and reflection spectra of guided optical waves in the MFBG are investigated. According to the sensitivity of MFBG spectral lines to the magneto-optic coupling intensity varying with applied magnetic field, a novel magnetic field sensor of high-resolution up to 0.01 nm/（kA/m） is predicted.

Application of Tube-Packaged FBG Strain Sensor in Vibration Experi ment of Submarine Pipeline Model

Optical fiber sensors have received increasing attention in the fields of aeronautic and civil engineering for their superior ability to stand explosion, immunity to electromagnetic interference and high accuracy, especially fit for measureroent applications in harsh environment. In this study, a novel FBG （fiber Bragg grating） strain sensor, which is packaged in a 1.2 mm stainless steel tube with epoxy resin, is developed. Experiments are conducted on the universal material testing machine to calibrate its strain transferring characteristics. The sensor has the advantages of small size, high precision and flexible use, and exhibits promising potentials. Five tube-packaged strain FBG sensors have been applied to the vibration experiment of a submarine pipeline model. The strain measttred with the FBG sensor agrees well with that measttred with the electric resistance strain sensor.