During the process of constructional backfill mining,the cemented paste backfill(CPB)typically exhibits a high degree of brittleness and limited resistance to failure.In this study,the mechanical and damage evolution ...During the process of constructional backfill mining,the cemented paste backfill(CPB)typically exhibits a high degree of brittleness and limited resistance to failure.In this study,the mechanical and damage evolution characteristics of waste tire steel fiber(WTSF)-modified CPB were studied through uniaxial compression tests,acoustic emission(AE)tests,and scanning electron microscopy(SEM).The results showed that the uniaxial compressive strength(UCS)decreased when the WTSF content was 0.5%,1%,and 1.5%.When the WTSF content reached 1%,the UCS of the modified CPB exhibited a minimal decrease(0.37 MPa)compared to that without WTSF.When the WTSF content was 0.5%,1%,and 1.5%,peak strain of the WTSF-modified CPB increased by 18%,31.33%,and 81.33%,while the elastic modulus decreased by 21.31%,26.21%,and 45.42%,respectively.The addition of WTSF enhances the activity of AE events in the modified CPB,resulting in a slower progression of the entire failure process.After the failure,the modified CPB retained a certain level of load-bearing capacity.Generally,the failure of the CPB was dominated by tensile cracks.After the addition of WTSF,a gradual increase in the proportion of tensile cracks was observed upon loading the modified CPB sample to the pore compaction stage.The three-dimensional localization of AE events showed that the WTSF-modified CPB underwent progressive damage during the loading,and the samples still showed good integrity after failure.Additionally,the response relationship between energy evolution and damage development of WTSF-modified CPB during uniaxial compression was analyzed,and the damage constitutive model of CPB samples with different WTSF contents was constructed.This study provides a theoretical basis for the enhancement of CPB modified by adding WTSF,serving as a valuable reference for the design of CPB constructional backfill.展开更多
Lithium element has attracted remarkable attraction for energy storage devices, over the past 30 years. Lithium is a light element and exhibits the low atomic number 3, just after hydrogen and helium in the periodic t...Lithium element has attracted remarkable attraction for energy storage devices, over the past 30 years. Lithium is a light element and exhibits the low atomic number 3, just after hydrogen and helium in the periodic table. The lithium atom has a strong tendency to release one electron and constitute a positive charge, as Li<sup> </sup>. Initially, lithium metal was employed as a negative electrode, which released electrons. However, it was observed that its structure changed after the repetition of charge-discharge cycles. To remedy this, the cathode mainly consisted of layer metal oxide and olive, e.g., cobalt oxide, LiFePO<sub>4</sub>, etc., along with some contents of lithium, while the anode was assembled by graphite and silicon, etc. Moreover, the electrolyte was prepared using the lithium salt in a suitable solvent to attain a greater concentration of lithium ions. Owing to the lithium ions’ role, the battery’s name was mentioned as a lithium-ion battery. Herein, the presented work describes the working and operational mechanism of the lithium-ion battery. Further, the lithium-ion batteries’ general view and future prospects have also been elaborated.展开更多
The construction controlling elements,including construction performance at low ambient temperatures,reserved time ranges,and the strength increasing rule,for locally developed epoxy asphalt mixture(LDEAM) are studi...The construction controlling elements,including construction performance at low ambient temperatures,reserved time ranges,and the strength increasing rule,for locally developed epoxy asphalt mixture(LDEAM) are studied through laboratory tests.Air void and Marshall stability are chosen as the performance measures for evaluating the construction quality.The wheel rolling test is used to simulate the actual construction situations,while the Marshall test and the Brookfield viscosity test are adopted to study the strength increasing rule.The experimental results reveal that the LDEAM can be constructed under a low ambient temperature condition of 10℃,and its longest reserved time is 70 min at a reserved temperature of 120℃.Test also shows that the strength of the LDEAM increases with time and temperature before cured.Finally,the theoretical reason for the strength increasing rule is analyzed on the basis of the organic chemistry theory.展开更多
By using cross-disciplines research method,deep survey and analysis had been conducted on residences of Dangjia Village in Hancheng City from four aspects which were spatial factors,spatial organization,decoration pat...By using cross-disciplines research method,deep survey and analysis had been conducted on residences of Dangjia Village in Hancheng City from four aspects which were spatial factors,spatial organization,decoration pattern and regional creation technology.In terms of spatial factors,courtyards,halls and wing-rooms had been studied;in terms of spatial organization,lane spaces and combination of courtyards had been emphasized;in terms of decoration pattern,stone carving decoration,brick carving decoration and wood carving decoration had been highlighted;in terms of creation technology,analysis had been conducted on structure,materials and structural features,so as to reveal regional characteristics of traditional residences at this area.During analysis process,it emphasized that traditional architectural style of Dangjia Village formed in certain historical condition.With the change of society,economy and culture,it should fully respect and inherit traditional architectural form,and utilize new materials,new technology,new structure and new creative measures during new countryside construction,so as to construct architectures inheriting and manifesting regional characteristics.展开更多
[Objective] This study was conducted to construct a super-high yield population of Japnica rice in cold regions of North China and to explore its characteristics. [Method] The super rice variety Longjing 21 was select...[Objective] This study was conducted to construct a super-high yield population of Japnica rice in cold regions of North China and to explore its characteristics. [Method] The super rice variety Longjing 21 was selected as the experimental material. Different row spacing(two levels), plant spacing(three levels) and seedling number per hill(three levels) were designed in field trials. Then, the growth stages,dry matter accumulation, leaf area, yield and yield components of these different treatments were measured. [Result] Rice yield had significantly negative correlation with plant spacing and row spacing, but no significant correlation with seedling number per hill. Rice yield was mainly affected by plant spacing, and less affected by seedling number per hill. The best recommended specifications for plant spacing of super rice variety Longjing 21 were 24 cm for row spacing, 12 cm for plant spacing and five seedlings per hill, and the expected yield was 10 473.0 kg/hm^2.The increased number of total spikelets(4.5×108hm2or more) in populations was the major reason for high yield. Super-high yield populations had fewer tillers at the early growth stage and achieved the expected number of productive tillers at critical leaf-age(June 25), and tiller number peaked at jointing stage(July 6) and was about 1.2 times of the expected number. The percentage of productive tillers in total tillers of super-high yield population was more than 85% at heading stage. At middle growth stage(from jointing to heading stage), the dry matter accumulation, leaf area index(LAI) at heading stage, effective leaf area, spikelet number of population,spikelet number per leaf area unit(cm2), and culm-sheath weight per stem of super-high yield population were significantly higher than those of other populations.At late growth stage(from heading to maturity stage), the leaf area decreasing rate of super-high yield population was significantly smaller than that of other populations. At late growth stage(from heading to maturity stage), the leaf area decreasing rate, crop growth rate, net assimilation rate, biomass accumulation, number of filled grains per leaf area unit(cm^2) and grain weight per leaf area unit(cm^2) of high-yield population were significantly higher than those of other populations. Output and translocation of dry matter(weight per stem and sheath and total filling rate at maturity) from heading to milky stage of super-high yield population were significantly higher than those of other populations. [Conclusion] The characteristics of superhigh yield rice in cold region of North China are enriching the amount of actual filling of sink through improving photosynthetic efficiency from heading to maturity stage on the basis of enough panicle numbers.展开更多
The development of urbanization has led to an increase in the number and scale of construction projects and the types of building construction engineering are getting advance and diverse due to the rapid development o...The development of urbanization has led to an increase in the number and scale of construction projects and the types of building construction engineering are getting advance and diverse due to the rapid development of technology.One of them is the static pressure prestressed pipe pile which is the most commonly used technology in modern building construction work.It is mainly used for pile foundation in construction work,and it has the advantages in less pollution,low noise,and high efficiency compared to the traditional pile foundation.Study on the characteristics of static pressure prestressed pipe pile must be carried out and strengthened the research to increase the effectiveness and quality of static pressure prestressed pipe pile on construction works.This paper is mainly to analyzed the characteristic and construction technology of static pressure prestressed pipe piles on building construction work.展开更多
Relying on remote sensor technology, GIS and Land--sat TM digital images,the authors use spatial and statistical analysis to examine the temporal-spatial characteristics of the change caused by urban construction in X...Relying on remote sensor technology, GIS and Land--sat TM digital images,the authors use spatial and statistical analysis to examine the temporal-spatial characteristics of the change caused by urban construction in Xinjiang’s rural areas from the end of the 1980s to the end of the 1990s. The primary findings show the following: 1) The urban construction in rural areas has increased drastically. The expansion speed of urban land use has accelerated over the past decade. The sub-land use changes caused by the urbanization of rural are characterized by salient regional differentiation among the three main regions and among the 85 counties of Xinjiang. 2) The shift of land use is mostly characterized by cultivated land and grassland being used for urban and industrial projects. Moreover, this change of land use is characteristic of regional differences. 3) Factors of rural-urban construction land use changes in Xinjiang, are undoubtedly affected by natural environment, social, economic conditions, and to a larger degree by population growth, GDP development and industrial development..展开更多
GPS observation network is deployed in the central part of Ningxia, which is the juncture of the Alxa block, Ordos block and Qinghai-Xizang (Tibet) block. Using the data of five phases of repeated survey sine 1996, th...GPS observation network is deployed in the central part of Ningxia, which is the juncture of the Alxa block, Ordos block and Qinghai-Xizang (Tibet) block. Using the data of five phases of repeated survey sine 1996, the current state of crustal movement in the central part of Ningxia is analyzed. From the result, we can know the following. (1) In the period from Dec. 1996 to May 1999, the central part of Ningxia had the phenomenon of left-lateral movement about the west margin of Ordos (measuring station P2) and the Lingwu fault on the east of the Yinchuan basin displayed the mode of left-lateral reverse strike slip movement. In that region, the direction of the principal stress field was NNE-SSW (with an azimuth of 29.8?; the central part to the south of the measuring station P2 displaced eastward; the vertical deformation was obviously greater than the horizontal deformation in order of magnitude; the Yinchuan basin and Qinghai-Xizang (Tibet) block were in a state of rising; the measuring station P1 in the hinterland of Ordos showed a trend of subsiding year by year; and there may be a hidden fault to exist between the measuring points P3 and P4. (2) About one year before the occurrence of moderately strong earthquakes in the vicinity of the measuring region, deformation anomalies and abnormal changes of principal stress direction can be observed by the GPS measuring stations in that region; before moderately strong earthquakes near the measuring region and before strong earthquakes in adjacent regions, the simulated GPS deformation vector field ofthat region can betoken the approximate position of the coming earthquake. These results can be regarded as the eigenvalues of earthquake prediction for consideration.展开更多
Based on the analysis of the form characteristics and construction of the public space of oasis traditional settlements in Turpan,and from the analysis and summary of the types,elements,scales and functions of the pub...Based on the analysis of the form characteristics and construction of the public space of oasis traditional settlements in Turpan,and from the analysis and summary of the types,elements,scales and functions of the public space of the traditional settlements,this study put forward that the public space of the oasis villages can be divided into point space,line space and plane space,and the formation and evolution rules of the public space of oasis traditional settlements in Turpan were obtained.Explore the role of public space in the construction of traditional settlements’ overall space,so as to provide reference for the development and renewal of public space of the current similar oasis settlements.展开更多
BACKGROUND : Experimental animal models of intracerebral hemorrhag (ICH) are greatly needed, so the process of establishment should be ideal in hematoma formation and easy to operate. OBJECTIVE : To construct mode...BACKGROUND : Experimental animal models of intracerebral hemorrhag (ICH) are greatly needed, so the process of establishment should be ideal in hematoma formation and easy to operate. OBJECTIVE : To construct model of ICH in rats with double injection of autologous blood taken from the cut tail cut and double withdrawal of the needle (shortened as two-step injection model), and compare with those induced by single and double injections. DESIGN : A randomized controlled tria SETTING: Department of Neurology, General Hospital of Military Area Command of Chinese PLA. MATERIALS: Thirty male Wistar rats of 10 to 12 months, weighing (400±25) g, provided by the Experimental Center of Medical Animals, General Hospital of Shenyang Military Area Command of Chinese PLA, were divided randomly into 3 groups with 10 rats in each group: two-step injection group, single injection group, double injection group. METHODS : The experiment was carried out in the Department of Neurology, General Hospital of Military Area Command of Chinese PLA from March to June in 2004. Autologous blood ICH model in rats were established as follows: In the two-step injection group, 50 μL unclotted autologous blood was taken from the rat tail cut, then injected with microsyringe into the caudate nucleus, 10 μL injected at first, paused for 2 minutes, and then the rest 40 μL injected slowly and continuously within 2 minutes. After the injection, the needle was kept immovable for about 4 minutes, withdrawn 2.0 mm, again kept immovable for about 4 minute, and then removed wholly at a slow speed. In the single injection group, 50 μL unclotted tail blood was injected slowly and continuously all within 2 minutes and the needle was slowly removed;(4) In the double injection group, 10 mL blood was injected at first, paused for 2 minutes, the rest 40 μL injected evenly within 2 minutes, and then the needle was withdrawn slowly and uninterruptedly. Neurologic findings were scored in accordance with Longa's five-point scale (0-4 scores, the higher the score, the severer the neurological dysfunction). The rats were killed to remove and sections were prepared, the morphological features of hematomas were grossly observed, the maximal diameter and size of hematomas in each slice were measured with the imaging analytical system, and the volume was calculated. Meanwhile, the conveniences of the techniques were compared. MAIN OUTCOME MEASURES: The morphological features and volume of hematomas, neurologic deficit score (NDS), and the convenience of the techniques were compared. RESULTS: All the 30 rats were involved in the analysis of results without deletion. (1) Results of the morphological observation of volume of hematoma: In the two-step injection group, hematomas located in the right caudate nucleus area regularly in circular or analogously circular shape in each slice. The formation rate of hematomas in the single injection group and double injection group were lower than those in the two-step injection group [60% (6/10), 80% (8/10), 100% (10/10), P〈 0.01, 0.05]. The volume of hematomas in the single injection group and double injection group were smaller than those in the two-step injection group [(28.5±14.8), (33.4±7.4), (41.6±3.9) mm3, P〈 0.01, 0.05]. (2) NDS results: The NDS scores in the single injection group and double injection group were smaller than that in the two-step injection group (0.90±0.83, 1.30±0.78, 1.90±0.57, P〈 0.05). (3)Comparison of the convenience of the techniques: The double injection method allowed generating reproducible hematomas in rats with shortcomings that it needed autologous arterial blood from femoral artery, and precision instruments such as microinfusion pump. The two-step injection injected fresh unclotting blood taken directly from the tail cut with microsyringe into the rat brain, and it has the advantages of easy operation, no influence on the activity of thrombase, shorter duration for model establishment, and higher rate of hematoma formation, which could generate ideal and economical models of ICH. The two-step injection induced hemotoma regularly in circular or analogously circular shape in each slice, but those induced by single and double injections were mostly in strip or fusiform shapes and extending along the needle tracks or into the ventricle or subarachnoid space. CONCLUSION : The autologous blood ICH model induced by the two-step injection method is a reproducible and reliable one in regular shape, which is better than those induced by double and single injections.展开更多
Base on the investigation results of residential housing construction quality recent years in China,this research first analyzes the general quality condition of residential housing construction,then demonstrates the ...Base on the investigation results of residential housing construction quality recent years in China,this research first analyzes the general quality condition of residential housing construction,then demonstrates the quality condition in different regions in our country,finds out main quality problems in the residential housing construction and studies the new characteristics of quality problems,finally provides the construction industry positive foundation to solve the quality problems objectively for residential housing construction.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52274143 and 51874284).
文摘During the process of constructional backfill mining,the cemented paste backfill(CPB)typically exhibits a high degree of brittleness and limited resistance to failure.In this study,the mechanical and damage evolution characteristics of waste tire steel fiber(WTSF)-modified CPB were studied through uniaxial compression tests,acoustic emission(AE)tests,and scanning electron microscopy(SEM).The results showed that the uniaxial compressive strength(UCS)decreased when the WTSF content was 0.5%,1%,and 1.5%.When the WTSF content reached 1%,the UCS of the modified CPB exhibited a minimal decrease(0.37 MPa)compared to that without WTSF.When the WTSF content was 0.5%,1%,and 1.5%,peak strain of the WTSF-modified CPB increased by 18%,31.33%,and 81.33%,while the elastic modulus decreased by 21.31%,26.21%,and 45.42%,respectively.The addition of WTSF enhances the activity of AE events in the modified CPB,resulting in a slower progression of the entire failure process.After the failure,the modified CPB retained a certain level of load-bearing capacity.Generally,the failure of the CPB was dominated by tensile cracks.After the addition of WTSF,a gradual increase in the proportion of tensile cracks was observed upon loading the modified CPB sample to the pore compaction stage.The three-dimensional localization of AE events showed that the WTSF-modified CPB underwent progressive damage during the loading,and the samples still showed good integrity after failure.Additionally,the response relationship between energy evolution and damage development of WTSF-modified CPB during uniaxial compression was analyzed,and the damage constitutive model of CPB samples with different WTSF contents was constructed.This study provides a theoretical basis for the enhancement of CPB modified by adding WTSF,serving as a valuable reference for the design of CPB constructional backfill.
文摘Lithium element has attracted remarkable attraction for energy storage devices, over the past 30 years. Lithium is a light element and exhibits the low atomic number 3, just after hydrogen and helium in the periodic table. The lithium atom has a strong tendency to release one electron and constitute a positive charge, as Li<sup> </sup>. Initially, lithium metal was employed as a negative electrode, which released electrons. However, it was observed that its structure changed after the repetition of charge-discharge cycles. To remedy this, the cathode mainly consisted of layer metal oxide and olive, e.g., cobalt oxide, LiFePO<sub>4</sub>, etc., along with some contents of lithium, while the anode was assembled by graphite and silicon, etc. Moreover, the electrolyte was prepared using the lithium salt in a suitable solvent to attain a greater concentration of lithium ions. Owing to the lithium ions’ role, the battery’s name was mentioned as a lithium-ion battery. Herein, the presented work describes the working and operational mechanism of the lithium-ion battery. Further, the lithium-ion batteries’ general view and future prospects have also been elaborated.
基金The National Natural Science Foundation of China (No.50578038)the National Key Technology R& D Program of China during the 11th Five-Year Plan Period (No. 2009BAG15B03)
文摘The construction controlling elements,including construction performance at low ambient temperatures,reserved time ranges,and the strength increasing rule,for locally developed epoxy asphalt mixture(LDEAM) are studied through laboratory tests.Air void and Marshall stability are chosen as the performance measures for evaluating the construction quality.The wheel rolling test is used to simulate the actual construction situations,while the Marshall test and the Brookfield viscosity test are adopted to study the strength increasing rule.The experimental results reveal that the LDEAM can be constructed under a low ambient temperature condition of 10℃,and its longest reserved time is 70 min at a reserved temperature of 120℃.Test also shows that the strength of the LDEAM increases with time and temperature before cured.Finally,the theoretical reason for the strength increasing rule is analyzed on the basis of the organic chemistry theory.
文摘By using cross-disciplines research method,deep survey and analysis had been conducted on residences of Dangjia Village in Hancheng City from four aspects which were spatial factors,spatial organization,decoration pattern and regional creation technology.In terms of spatial factors,courtyards,halls and wing-rooms had been studied;in terms of spatial organization,lane spaces and combination of courtyards had been emphasized;in terms of decoration pattern,stone carving decoration,brick carving decoration and wood carving decoration had been highlighted;in terms of creation technology,analysis had been conducted on structure,materials and structural features,so as to reveal regional characteristics of traditional residences at this area.During analysis process,it emphasized that traditional architectural style of Dangjia Village formed in certain historical condition.With the change of society,economy and culture,it should fully respect and inherit traditional architectural form,and utilize new materials,new technology,new structure and new creative measures during new countryside construction,so as to construct architectures inheriting and manifesting regional characteristics.
基金Supported by National Key Technology Research and Development Program of China(2011BAD16B11-02YJ01,2012BAD04B01-02)Key Science and Technology Program of Heilongjiang Province+2 种基金China(GA13B101)Heilongjiang Postdoctoral Sustentation Fund(LBH-Z10038)the Funds of Heilongjiang Academy of Agricultural Sciences for Distinguished Young Scholars(2014)~~
文摘[Objective] This study was conducted to construct a super-high yield population of Japnica rice in cold regions of North China and to explore its characteristics. [Method] The super rice variety Longjing 21 was selected as the experimental material. Different row spacing(two levels), plant spacing(three levels) and seedling number per hill(three levels) were designed in field trials. Then, the growth stages,dry matter accumulation, leaf area, yield and yield components of these different treatments were measured. [Result] Rice yield had significantly negative correlation with plant spacing and row spacing, but no significant correlation with seedling number per hill. Rice yield was mainly affected by plant spacing, and less affected by seedling number per hill. The best recommended specifications for plant spacing of super rice variety Longjing 21 were 24 cm for row spacing, 12 cm for plant spacing and five seedlings per hill, and the expected yield was 10 473.0 kg/hm^2.The increased number of total spikelets(4.5×108hm2or more) in populations was the major reason for high yield. Super-high yield populations had fewer tillers at the early growth stage and achieved the expected number of productive tillers at critical leaf-age(June 25), and tiller number peaked at jointing stage(July 6) and was about 1.2 times of the expected number. The percentage of productive tillers in total tillers of super-high yield population was more than 85% at heading stage. At middle growth stage(from jointing to heading stage), the dry matter accumulation, leaf area index(LAI) at heading stage, effective leaf area, spikelet number of population,spikelet number per leaf area unit(cm2), and culm-sheath weight per stem of super-high yield population were significantly higher than those of other populations.At late growth stage(from heading to maturity stage), the leaf area decreasing rate of super-high yield population was significantly smaller than that of other populations. At late growth stage(from heading to maturity stage), the leaf area decreasing rate, crop growth rate, net assimilation rate, biomass accumulation, number of filled grains per leaf area unit(cm^2) and grain weight per leaf area unit(cm^2) of high-yield population were significantly higher than those of other populations. Output and translocation of dry matter(weight per stem and sheath and total filling rate at maturity) from heading to milky stage of super-high yield population were significantly higher than those of other populations. [Conclusion] The characteristics of superhigh yield rice in cold region of North China are enriching the amount of actual filling of sink through improving photosynthetic efficiency from heading to maturity stage on the basis of enough panicle numbers.
文摘The development of urbanization has led to an increase in the number and scale of construction projects and the types of building construction engineering are getting advance and diverse due to the rapid development of technology.One of them is the static pressure prestressed pipe pile which is the most commonly used technology in modern building construction work.It is mainly used for pile foundation in construction work,and it has the advantages in less pollution,low noise,and high efficiency compared to the traditional pile foundation.Study on the characteristics of static pressure prestressed pipe pile must be carried out and strengthened the research to increase the effectiveness and quality of static pressure prestressed pipe pile on construction works.This paper is mainly to analyzed the characteristic and construction technology of static pressure prestressed pipe piles on building construction work.
文摘Relying on remote sensor technology, GIS and Land--sat TM digital images,the authors use spatial and statistical analysis to examine the temporal-spatial characteristics of the change caused by urban construction in Xinjiang’s rural areas from the end of the 1980s to the end of the 1990s. The primary findings show the following: 1) The urban construction in rural areas has increased drastically. The expansion speed of urban land use has accelerated over the past decade. The sub-land use changes caused by the urbanization of rural are characterized by salient regional differentiation among the three main regions and among the 85 counties of Xinjiang. 2) The shift of land use is mostly characterized by cultivated land and grassland being used for urban and industrial projects. Moreover, this change of land use is characteristic of regional differences. 3) Factors of rural-urban construction land use changes in Xinjiang, are undoubtedly affected by natural environment, social, economic conditions, and to a larger degree by population growth, GDP development and industrial development..
基金the Program of the Science and Technology Commission of Ningxia Hui Autonomous Region and Joint Foundation of Seismological Science(197043).
文摘GPS observation network is deployed in the central part of Ningxia, which is the juncture of the Alxa block, Ordos block and Qinghai-Xizang (Tibet) block. Using the data of five phases of repeated survey sine 1996, the current state of crustal movement in the central part of Ningxia is analyzed. From the result, we can know the following. (1) In the period from Dec. 1996 to May 1999, the central part of Ningxia had the phenomenon of left-lateral movement about the west margin of Ordos (measuring station P2) and the Lingwu fault on the east of the Yinchuan basin displayed the mode of left-lateral reverse strike slip movement. In that region, the direction of the principal stress field was NNE-SSW (with an azimuth of 29.8?; the central part to the south of the measuring station P2 displaced eastward; the vertical deformation was obviously greater than the horizontal deformation in order of magnitude; the Yinchuan basin and Qinghai-Xizang (Tibet) block were in a state of rising; the measuring station P1 in the hinterland of Ordos showed a trend of subsiding year by year; and there may be a hidden fault to exist between the measuring points P3 and P4. (2) About one year before the occurrence of moderately strong earthquakes in the vicinity of the measuring region, deformation anomalies and abnormal changes of principal stress direction can be observed by the GPS measuring stations in that region; before moderately strong earthquakes near the measuring region and before strong earthquakes in adjacent regions, the simulated GPS deformation vector field ofthat region can betoken the approximate position of the coming earthquake. These results can be regarded as the eigenvalues of earthquake prediction for consideration.
基金the National Natural Science Foundation of China(51768066)Funded Project of Doctoral Start-up Fund of Xinjiang University(620312355).
文摘Based on the analysis of the form characteristics and construction of the public space of oasis traditional settlements in Turpan,and from the analysis and summary of the types,elements,scales and functions of the public space of the traditional settlements,this study put forward that the public space of the oasis villages can be divided into point space,line space and plane space,and the formation and evolution rules of the public space of oasis traditional settlements in Turpan were obtained.Explore the role of public space in the construction of traditional settlements’ overall space,so as to provide reference for the development and renewal of public space of the current similar oasis settlements.
文摘BACKGROUND : Experimental animal models of intracerebral hemorrhag (ICH) are greatly needed, so the process of establishment should be ideal in hematoma formation and easy to operate. OBJECTIVE : To construct model of ICH in rats with double injection of autologous blood taken from the cut tail cut and double withdrawal of the needle (shortened as two-step injection model), and compare with those induced by single and double injections. DESIGN : A randomized controlled tria SETTING: Department of Neurology, General Hospital of Military Area Command of Chinese PLA. MATERIALS: Thirty male Wistar rats of 10 to 12 months, weighing (400±25) g, provided by the Experimental Center of Medical Animals, General Hospital of Shenyang Military Area Command of Chinese PLA, were divided randomly into 3 groups with 10 rats in each group: two-step injection group, single injection group, double injection group. METHODS : The experiment was carried out in the Department of Neurology, General Hospital of Military Area Command of Chinese PLA from March to June in 2004. Autologous blood ICH model in rats were established as follows: In the two-step injection group, 50 μL unclotted autologous blood was taken from the rat tail cut, then injected with microsyringe into the caudate nucleus, 10 μL injected at first, paused for 2 minutes, and then the rest 40 μL injected slowly and continuously within 2 minutes. After the injection, the needle was kept immovable for about 4 minutes, withdrawn 2.0 mm, again kept immovable for about 4 minute, and then removed wholly at a slow speed. In the single injection group, 50 μL unclotted tail blood was injected slowly and continuously all within 2 minutes and the needle was slowly removed;(4) In the double injection group, 10 mL blood was injected at first, paused for 2 minutes, the rest 40 μL injected evenly within 2 minutes, and then the needle was withdrawn slowly and uninterruptedly. Neurologic findings were scored in accordance with Longa's five-point scale (0-4 scores, the higher the score, the severer the neurological dysfunction). The rats were killed to remove and sections were prepared, the morphological features of hematomas were grossly observed, the maximal diameter and size of hematomas in each slice were measured with the imaging analytical system, and the volume was calculated. Meanwhile, the conveniences of the techniques were compared. MAIN OUTCOME MEASURES: The morphological features and volume of hematomas, neurologic deficit score (NDS), and the convenience of the techniques were compared. RESULTS: All the 30 rats were involved in the analysis of results without deletion. (1) Results of the morphological observation of volume of hematoma: In the two-step injection group, hematomas located in the right caudate nucleus area regularly in circular or analogously circular shape in each slice. The formation rate of hematomas in the single injection group and double injection group were lower than those in the two-step injection group [60% (6/10), 80% (8/10), 100% (10/10), P〈 0.01, 0.05]. The volume of hematomas in the single injection group and double injection group were smaller than those in the two-step injection group [(28.5±14.8), (33.4±7.4), (41.6±3.9) mm3, P〈 0.01, 0.05]. (2) NDS results: The NDS scores in the single injection group and double injection group were smaller than that in the two-step injection group (0.90±0.83, 1.30±0.78, 1.90±0.57, P〈 0.05). (3)Comparison of the convenience of the techniques: The double injection method allowed generating reproducible hematomas in rats with shortcomings that it needed autologous arterial blood from femoral artery, and precision instruments such as microinfusion pump. The two-step injection injected fresh unclotting blood taken directly from the tail cut with microsyringe into the rat brain, and it has the advantages of easy operation, no influence on the activity of thrombase, shorter duration for model establishment, and higher rate of hematoma formation, which could generate ideal and economical models of ICH. The two-step injection induced hemotoma regularly in circular or analogously circular shape in each slice, but those induced by single and double injections were mostly in strip or fusiform shapes and extending along the needle tracks or into the ventricle or subarachnoid space. CONCLUSION : The autologous blood ICH model induced by the two-step injection method is a reproducible and reliable one in regular shape, which is better than those induced by double and single injections.
文摘Base on the investigation results of residential housing construction quality recent years in China,this research first analyzes the general quality condition of residential housing construction,then demonstrates the quality condition in different regions in our country,finds out main quality problems in the residential housing construction and studies the new characteristics of quality problems,finally provides the construction industry positive foundation to solve the quality problems objectively for residential housing construction.
基金supported by the support plan for the development of Marxist theoretical discipline in Shanghai in 2017(Marxist theory teaching research on“Young and Middle-aged Talents”project)In 2017,The special topic on“Chinese Citizens’Political Identity Since the 18th CPC National Congress”in the“Research on Xi Jinping’s Important Thoughts In The New Era”held by Shanghai International Studies UniversityThe research has been funded by the basic scientific research fee of the central colleges and universities