APPLICATION OF SIMILARITY PRINCIPLE TO STRATIFICATION THEORY STUDY IN GRAVITY CONCENTRATION

The stratification processes have been studied by the application of the similarity principle, and the similarity criteria has also been derived.Two possible π-equations were deduced from the experimental results.The approach of the π-equation to predict separating results and to control the separating processes is presented with examples.

APPLICATION OF TRIANGLE MARKOV CHAIN TO GRAVITY CONCENTRATION

In combination with the Bagnold's shearing theory and the principle of Markov process,a mathematical model of sluice type's gravity concentrators has been developed based on the transfer probabilities of mineral particles.According to the transfer probabilities,the quanti- tative relationship between the final separation results and feed variables has been established and verified by experimental data.The availability of this model is vital for process design and optimization or mill control of gravity concentration circuits.

Use of centrifugal-gravity concentration for rejection of talc and recovery improvement in base-metal flotation

The possibility of using a centrifugal-gravity concentrator to reject Mg-bearing minerals and minimize metal losses in the flotation of base metals was evaluated. Sample characterization, batch scoping tests, pilot-scale tests, and regrind-flotation tests were conducted on a Ni flotation tailings stream. Batch tests revealed that the Mg grade decreased dramatically in the concentrate products. Pilot-scale testing of a continuous centrifugal concentrator（Knelson CVD6） on the flotation tailings revealed that a concentrate with a low mass yield, low Mg content, and high Ni upgrade ratio could be achieved. Under optimum conditions, a concentrate at 6.7% mass yield was obtained with 0.85% Ni grade at 12.9% Ni recovery and with a low Mg distribution（1.7%）. Size partition curves demonstrated that the CVD also operated as a size classifier, enhancing the rejection of talc fines. Overall, the CVD was capable of rejecting Mg-bearing minerals. Moreover, an opportunity exists for the novel use of centrifugal-gravity concentration for scavenging flotation tailings and/or after comminution to minimize amount of Mg-bearing minerals reporting to flotation.

Case study on stratospheric and mesospheric concentric gravity waves generated by deep convection

Concentric gravity waves(CGWs)in the middle and upper atmosphere show wave-coupling processes between the lower atmosphere and the middle and upper atmosphere.In this research,we analyzed a case of CGWs detected simultaneously by the AIRS(Atmospheric Infrared Sounder)and the VIIRS/DNB(Day/Night Band of the Visible Infrared Imager Radiometer Suite)in the stratosphere and mesosphere.Results showed that gravity waves(GWs)were generated by the collocated Hurricane Bejisa on the island of Mauritius.The AIRS data showed arc-like phase fronts of GWs with horizontal wavelengths of 190 and 150 km at 21:08 coordinated universal time(UTC)on 1 January 2014 and at 10:00 UTC on 2 January 2014,whereas the DNB observed arced GWs with horizontal wavelengths of 60 and 150 km in the same geographic regions at 22:24 UTC.The characteristics of CGW parameters in the stratosphere(~40 km)and the mesosphere(~87 km),such as the vertical wavelength,intrinsic frequency,and intrinsic horizontal phase speed,were first derived together with the background winds from ERA5 reanalysis data and Horizontal Wind Model data through the dispersion relationship of GWs and the wind-filtering theory.

Joint observation of the concentric gravity wave event on the Tibetan Plateau

A concentric gravity wave event was captured by a photographer in NagarzêCounty(90.28°N,28.33°E)between 02:00 and 04:00(local time)on May 11,2019.This concentric gravity wave event was also observed by the Suomi National Polar-orbiting Partnership satellite and the all-sky airglow imager at Yangbajing station(90.5°E,30.1°N).The temporal and spatial information on gravity waves from the photographs provided a rare opportunity to study the propagation of gravity waves over the Tibetan Plateau.According to wind and temperature data from the MERRA-2 reanalysis(Modern-Era Retrospective analysis for Research and Applications,Version 2)and empirical models(NRLMSISE-00[Naval Research Laboratory Mass Spectrometer and Incoherent Scatter Radar Exosphere]and HWM[horizontal wind model]),we inversely derived the propagation trajectory from the observed wave pattern to the source region by using the ray-tracing method.The source of the concentric gravity wave was identified as deep convection in Bangladesh(90.6°E,25.0°N).The maximum background wind speed in the propagation direction(31.05 m/s)was less than the phase speed of 53 m/s,which is consistent with the wind-filtering theory.

Characterization and processing of talc-magnesite from the Zinelbulak deposit

The characteristics of talc-magnesite from the Zinelbulak deposit(Uzbekistan) were investigated via X-ray diffraction, differential thermal analysis,infrared spectroscopy and optical microscopy.The mineralogical composition of the Zinelbulak talc-magnesite consists of 52 wt.%talc,43 wt.%carbonates and 5 wt.%of the iron-containing minerals magnetite,siderite and chlorite.Petrographic analysis confirmed the presence of carbonates in two forms:magnesite and breunnerite.Grindability tests revealed that talc and magnesite particles are completely separated after a grinding process carried out for 10～12 min.The distribution of the yield of talc and magnesite,as a function of the particle size,shows an irregular feature in that a comparatively coarser sample(>0.1 mm) is richer in magnesite and poor in talc while a comparatively finer sample(<0.1 mm) has a composition poorer in magnesite.The dressability of the Zinelbulak talc-magnesite was tested using conventional gravity concentration,flotation and electromagnetic separation.Gravity concentration was found to be the most economic initial process for the complete separation of magnesium carbonate and talc.Subsequent flotation and magnetic separation techniques could further increase the yield of high quality magnesite and talc.Refractory samples prepared by heating the separated magnesite at 1600℃for 2 h met the State Standards for refractory materials.

Evaluation of Mayer curve validity on feed blending at the Zarand coal washery plant

The coal processing methods used at the Zarand coal washery plant are the heavy medium bath,jigs,and flotation.The coal-containing materials that are fed to the plant are acquired from different mines,and they have different washability properties.In this paper,the validity of Mayer curve (M-curve),the conventional method for determining coal washability,was evaluated on blending of raw coals that are fed to the plant.Washability curves were prepared for the hand-blended samples and compared with the washability predicted by the Mayer curves.Different samples from different seams and mines were blended by hand in 50:50 ratios,and sink and float tests were performed;the resulting washability curves were in good agreement with the washability curves predicted using the Mayer method for the same blending ratio.This work resulted in the preparation of the optimum plant feed that can be achieved from the blending of different coal samples to produce the best plant yield at a given ash content.

Study on Scandium Separation from Rare Earth Ore in Yunnan Province

Chemical components, main mineral content and mineral composition of rare earth ore in Yunnan Province was measurated by the analysis of the spectrum and the chemical components. The study shows that main metals mineral in the rare earth ore are magnetite, tatanomagnetite, limonite; less metals mineral are ilmenite, hematite; some minim minerals were iron pyrites, zircon, scheelite, and so on. Main nonmetals mineral are quartz, feldspar(plagioclase, K-feldspar); less nonmetals mineral are hopfnerite, biotite, titanite; some minim minerals are kaolinite and dolomite. Ilmenite has the highest content of Sc as 175 g·t -1, next is titanite as 81.2 g·t -1. Based on this result, A new method of extracting Sc is put forward. The technological flowsheet of separating Sc of low-intensity magnetic separation,tabing, gravity concentrate, high-gradient magnetic separation, and electrostatic separation was prepared. Amplified experiment obtained Sc concentrate with Sc content of 148.54 g·t -1, the yield of 7.92%,recovery of 69.20%, at the same time, a Fe concentrate with the grade of 63.88% and the yield of 5.91% is obtained.