Greenhouse gas emission analysis and measurement for urban rail transit: A review of research progress and prospects

Rail transit plays a key role in mitigating transportation system carbon emissions.Accurate measurement of urban rail transit carbon emission can help quantify the contribution of urban rail transit towards urban transportation carbon emission reduction.Since the whole life cycle of urban rail transit carbon emission measurement involves a wide range of aspects,a systematic framework model is required for analysis.This research reviews the existing studies on carbon emission of urban rail transit.First,the characteristics of urban rail transit carbon emission were determined and the complexity of carbon emission measurement was analyzed.Then,the urban rail transit carbon emission measurement models were compared and analyzed in terms of the selection of research boundaries,the types of greenhouse gas(GHG)emissions calculation,and the accuracy of the measurement.Following that,an intelligent station was introduced to analyze the practical application of digital collaboration technology and energy-saving and carbon-reducing system platforms for rail transit.Finally,the urgent problems and future research directions at this stage were discussed.This research presents the necessity of establishing a dynamic carbon emission factor library and the important development trend of system integration of carbon emission measurement and digital system technology.

Effect of Four Pesticides on Controlling Autumn Cowpea Greenhouse Whitefly

In order to mitigate the occurrence and damage of cowpea whitefly, reduce chemical pesticide consumption, residue and environmental pollution, the methods of forecasting, randomized block design andstatistical analysis were used in field efficacy trials, to study the control effect of cowpea anthracnose by usingchemical pesticides dinotefuran, acetamiprid, pymetrozine, and bio-pesticide avermectin. The results showed that after applying 1.85% avermectin EC 375 g, 20% dinotefuran SP 600 g, 5% acetamiprid WP 600 g, and 25% pymetrozine WP 600 g （control pesticide） per hm2 once every 5-8 days, and 3 times continuously underserious autumn occurrence of greenhouse whitefly, the control efficacy was 90.9%, 97.0%, 88.0%, 93.9%respectively on the 7th day after the pesticides application; 97.4%, 92.1%, 84.2%, 89.4% respectively on the 14th day after the pesticides application; and 95.6%, 86.7%, 82.2%, 84.5%, respectively on the 20th day afterthe pesticides application. The control effects among avermectin, acetamiprid and pymetrozine were not significantly different, while the effects of avermectin and pymetrozine were significantly higher than that of acetamiprid on the 7th day. The control effects among avermectin, dinotefuran and pymetrozine were not significantly different, while significantly higher than that of acetamiprid on the 14th day. The control effect of avermectin was significantly higher than that of dinotefuran, acetamiprid and pymetrozine on the 20th day. Meanwhile, the control effect of avermectin was slightly lower, higher and much higher than that of dinotefuran on the 7th, 14th, 20th day respectively after the treatment. These results indicated that the four pesticides,especiaLly biopesticide avermectin, were ideal pesticides, which could not only be used for controlling cowpea whitefly, but also realize modern, green, organic and ecological agricultural production.

Simulation of Greenhouse Heating System Using Fuzzy Smith Cascade Compound Control

Aiming at characteristic of time delay, time-varying parameters and much disturb in glass greenhouse heating system, fuzzy smith cascade compound control policy based on typical PID cascade compound control policy is proposed. Simulation results show that it is effective to overcome the influence of time delay on stability of control system and the system possesses strong robust and good dynamic performance..

A wireless solution for greenhouse monitoring and control system based on ZigBee technology

With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compared the advantages of ZigBee with other two similar wireless networking protocols, Wi-Fi and Bluetooth, and proposed a wireless solution for green- house monitoring and control system based on ZigBee technology. As an explorative application of ZigBee technology in Chinese greenhouse, it may promote Chinese protected agriculture.

Design of Greenhouse Environment Control System Based on Internet of Things

There are some disadvantages, such as complicated wiring, high cost, poor monitoring flexibility, low accuracy and high energy consumption in traditional greenhouse environment monitoring system which based on previous wireless sensor networks （WSN）. Aiming at these problems, a greenhouse environmental parameter monitoring system had been designed based on internet of things technology in this paper. A set of control system with good robustness, strong adaptive ability and small overshoot was set up by combining the fuzzy proportion-integral-derivative （PID） control. The system was composed of a number of independent greenhouse monitoring systems. The server could provide remote monitoring access management services after the collected data were transmitted. The data transmission part of greenhouse was based on ZigBee networking protocol. And the data were sent to intelligent system via gateway connected to the internet. Compared to the classical PID control and fuzzy control, the fuzzy PID control could quickly and accurately adjust the corresponding parameters to the set target. The overshoot was also relatively small. The simulation results showed that the amount of overshoot was reduced 20% compared with classical PID control.

RESEARCH ON MECHANICAL MEASUREMENT-ORIENTED INTELLIGENT VIRTUAL CONTROLS

Intelligent virtual control (IVC) is an intelligent measurement instrumentunit with the function of actual measurement instruments, and the unit can be used as basic buildingblock for a variety of more complex virtual measurement instruments on a PC. IVC is a furtheradvancement from virtual instrument (VI), and it fuses the function modules and the controls modulesso that the relationship between the functions and controls of an instrument is imbedded in one ormore units. The design, implementation and optimization methods of IVCs are introduced. The computersoftware representation of IVCs is discussed. An example of an actual VI constructed with thebuilding blocks of IVCs is given.

Behavior Measurement Model Based on Prediction and Control of Trusted Network

In order to construct the trusted network and realize the trust of network behavior,a new multi-dimensional behavior measurement model based on prediction and control is presented.By using behavior predictive equation,individual similarity function,group similarity function,direct trust assessment function,and generalized predictive control,this model can guarantee the trust of an end user and users in its network.Compared with traditional measurement model,the model considers different characteristics of various networks.The trusted measurement policies established according to different network environments have better adaptability.By constructing trusted group,the threats to trusted group will be reduced greatly.Utilizing trusted group to restrict individuals in network can ensure the fault tolerance of trustworthiness of trusted individuals and group.The simulation shows that this scheme can support behavior measurement more efficiently than traditional ones and the model resists viruses and Trojans more efficiently than older ones.

Coordination Control of Greenhouse Environmental Factors

Optimal control of greenhouse climate is one of the key techniques in digital agriculture.Greenhouse climate,a nonlinear and uncertain system,consists of several major environmental factors such as temperature,humidity,light intensity,and CO 2 concentration.Due to the complex coupled correlations,it is a challenge to achieve coordination control of greenhouse environmental factors.This paper proposes a model-free coordination control approach for greenhouse environmental factors based on Q-learning.Coordination control policy is found through systematic interaction with the dynamic environment to achieve optimal control for greenhouse climate with the control cost constraints.In order to decrease systematic trial-and-error risk and reduce the computational complexity in Q-learning algorithm,case-based reasoning （CBR） is seamlessly incorporated into the Q-learning process.The experimental results demonstrate that this approach is practical,highly effective and efficient.

Controlled teleportation of high-dimension quantumstates with generalized Bell-state measurement

In this paper a scheme for controlled teleportation of arbitrary high-dimensional unknown quantum states is proposed by using the generalized Bell-basis measurement and the generalized Hadamard transformation. As two special cases, two schemes of controlled teleportation of an unknown single-qutrit state and an unknown two-qutrit state are investigated in detail. In the first scheme, a maximally entangled three-qutrit state is used as the quantum channel, while in the second scheme, an entangled two-qutrit state and an entangled three-qutrit state are employed as the quantum channels. In these schemes, an unknown qutrit state can be teleported to either one of two receivers, but only one of them can reconstruct the qutrit state with the help of the other. Based on the case of qutrits, a scheme of controlled teleportation of an unknown qudit state is presented.

A New Device for Gas-Liquid Flow Measurements Relying on Forced Annular Flow

A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.

Determining heating pipe temperature in greenhouse using proportional integral plus feedforward control and radial basic function neural-networks

Proportional integral plus feedforward (PI+FF) control was proposed for identifying the pipe temperature in hot water heating greenhouse. To get satisfying control result, ten coefficients must be adjusted properly. The data for training and testing the radial basic function (RBF) neural-networks model of greenhouse were collected in a 1028 m2 multi-span glasshouse. Based on this model, a method of coefficients adjustment is described in this article.

H-infinity measurement-feedback control for discrete-time systems with a single measurement delay

H-infinity control problem for linear discrete-time systems with instantaneous and delayed measurements is studied. A necessary and sufficient condition for the existence of the H-infinity controller is derived by applying reorganized innovation analysis approach in Krein space. The measurement-feedback controller is designed by performing two Riccati equations. The presented approach does not require the state augmentation.

PRECISE INTEGRATION METHOD FOR LQG OPTIMAL MEASUREMENT FEEDBACK CONTROL PROBLEM

By using the precise integration method, the numerical solution of linear quadratic Gaussian (LQG) optimal control problem was discussed. Based on the separation principle, the LQG central problem decomposes, or separates, into an optimal state-feedback control problem and an optimal state estimation problem. That is the off-line solution of two sets of Riccati differential equations and the on-line integration solution of the state vector from a set of time-variant differential equations. The present algorithms are not only appropriate to solve the two-point boundary-value problem and the corresponding Riccati differential equation, but also can be used to solve the estimated state from the time-variant differential equations. The high precision of precise integration is of advantage for the control and estimation. Numerical examples demonstrate the high precision and effectiveness of the algorithm.

Reducing Greenhouse Gas Emission from the Neodymium Oxide Electrolysis. Part II: Basics of a Process Control Avoiding PFC Emission

The neodymium electrolysis produces unnecessary high emission of CF4 and C2F6. These perfluorocarbons (PFCs) are potent greenhouse gases and are not filtered or destroyed in the off-gas. A process control in analogy to the aluminum electrolysis can reduce the PFC emission to a great extend and keep the process in a green process window. Therefore, a theoretical analysis is done of the cell voltage of the industrial neodymium electrolysis in dependence on the neodymium oxide concentration in the electrolyte. The analysis shows the different contributions to the cell voltage focusing on the impact of the anodic overvoltage on the cell voltage, by which the electrolysis process can be controlled. The model of the cell voltage is evaluated by laboratory neodymium electrolysis with a similar setup as the industrial cell. The relation of the oxide concentration, the anodic current density and the cell voltage with the cell resistance are measured. The continuous off-gas measurements show the gas concentration and PFC emissions. The effect of Nd2O3 feeding on the galvanostatic electrolysis is analyzed as well. Based on the results a process control strategy is proposed similar to the aluminum electrolysis strategy. The green process window is in a narrow oxide concentration range, making a continuous and precise oxide feeding essential.

Impact of Migrant Populations on Tuberculosis Rates in Saudi Arabia: Assessing How Migration Patterns Affect TB Incidence and Control Measures: A Narrative Review

This research focuses on the effects of migration on the TB infection rate and its prevention in Saudi Arabia, which has a large number of expatriates from TB-affected countries. Despite, based on the current global statistics of TB occurrence, it is evident that the national incidence of TB has reduced from 10.55 per 100,000 in 2015 to 8.36 per 100,000 in 2019;despite this, there are still some difficulties because migrants bring new strains of Mycobacterium tuberculosis. Hindrances, including language barriers and perceived immigration status, hinder patients from seeking medical attention or doctors from diagnosing diseases. Each patient and each cultural group need special attention to public health, enhancing living circumstances, and health care support. Community participation, inclusion of TB control programs into functional healthcare facilities, and the functioning of TB programs need to be stressed to address TB issues. Considering the focus on social, economic, and cultural approaches, the country can make severe advancements in TB control and population protection. This holistic analysis is critical for a long-term effective strategy to combat TB in the Kingdom.

Active Disturbance Rejection Control for Uncertain Nonlinear Systems With Sporadic Measurements

This paper deals with the problem of active disturbance rejection control(ADRC)design for a class of uncertain nonlinear systems with sporadic measurements.A novel extended state observer(ESO)is designed in a cascade form consisting of a continuous time estimator,a continuous observation error predictor,and a reset compensator.The proposed ESO estimates not only the system state but also the total uncertainty,which may include the effects of the external perturbation,the parametric uncertainty,and the unknown nonlinear dynamics.Such a reset compensator,whose state is reset to zero whenever a new measurement arrives,is used to calibrate the predictor.Due to the cascade structure,the resulting error dynamics system is presented in a non-hybrid form,and accordingly,analyzed in a general sampled-data system framework.Based on the output of the ESO,a continuous ADRC law is then developed.The convergence of the resulting closed-loop system is proved under given conditions.Two numerical simulations demonstrate the effectiveness of the proposed control method.

Study on DeviceNet communication mechanism and its application in protection measurement and control system

To fit in with the developing requirement of int and communication of protective relays, a protection egrated functions of protection measurement, control measurement and control system based on DeviceNet fieldbus is designed. The communication mechanism of DeviceNet is studied and data trigger modes, communication connection, message types and other key technologies are analyzed. The object modeling and device description of the device are realized too. Results of network test, dynamic simulation and test in the field indicate that this system can accomplish all the communication tasks in real time and can make precise response to every kind of faults of the motor, transformer, line and capacitor. Moreover, this system has higher measurement precision and better control capability.

Simulation Platform for Greenhouse Environment Control System

The simulation system is designed to imitate a greenhouse environment with the software on computer. The relation ships between greenhouse indoor environment, outdoor environment and environment conditioner are presented The energy balance equation and humidity balance equation of the greenhouse are givea In this system, the weather data is generated by computer according to the real weather data and rules in Beijing. The state of the devices can be dynamically decided based on the given intelligent control algorithm Then the parameters of the greenhouse environment are decided based on the greenhouse model that presented All the results are showed on the screen with kindly interface and stored to disk automatically.

Estimation of greenhouse gas emissions in China and the abatement measures

The major emission sources of carbon dioxide, methane, nitrous oxide and CFCs in China have been identified, and the emission trends has been estimated. Besides fossil fuel combustion, human respiration and biomass burning are important sources. Some feasible abatement measures on energy conservation, afforestation and biomass recycling have been discussed.

Research on the Intelligent Greenhouse Environmental Control System

The reseach carried out study to intelligent environmental control system of greenhouse and designed suitable new-type greenhouse environmental control system where crops grew. Explained the basic principle of every environmental factor and concrete to realize of control system in detail at the same time.