We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were use...We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.展开更多
Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechani...Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechanical properties.Due to the wide variety of materials available that have comparable attributes and satisfy the requirements of the product design specification,material selection has become a crucial component of design for engineers.This paper discusses the study’s findings in choosing the suitable thermoplastic matrices of Natural Fibre Composites for Cyclist Helmet utilising the DMAIC,and GRA approaches.The results are based on integrating two decision methods implemented utilising two distinct decision-making approaches:qualitative and quantitative.This study suggested thermoplastic polyethylene as a particularly ideal matrix in composite cyclist helmets during the selection process for the best thermoplastic matrices material using the 6σtechnique,with the decision based on the highest performance,the lightest weight,and the most environmentally friendly criteria.The DMAIC and GRA approach significantly influenced the material selection process by offering different tools for each phase.In the future study,selection technique may have been more exhaustive if more information from other factors had been added.展开更多
This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the lim...This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the limitations of present methods based on aggregation operators. First, the limitations of several existing single-valued neutrosophic weighted averaging aggregation operators (i.e. , the single-valued neutrosophic weighted averaging, single-valued neutrosophic weighted algebraic averaging, single-valued neutrosophic weighted Einstein averaging, single-valued neutrosophic Frank weighted averaging, and single-valued neutrosophic Hamacher weighted averaging operators), which can produce some indeterminate terms in the aggregation process, are discussed. Second, an ISNHWA operator was developed to overcome the limitations of existing operators. Third, the properties of the proposed operator, including idempotency, boundedness, monotonicity, and commutativity, were analyzed. Application examples confirmed that the ISNHWA operator and the proposed MCGDM method are rational and effective. The proposed improved ISNHWA operator and MCGDM method can overcome the indeterminate results in some special cases in existing single-valued neutrosophic weighted averaging aggregation operators and MCGDM methods.展开更多
To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weap...To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.展开更多
A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making (MADM) proble...A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making (MADM) problem. This paper proposes a new mathematical model based on the response surface method (RSM) and the grey relational analysis (GRA). RSM is used to obtain the experimental points and analyze the factors that have a significant impact on the selection results. GRA is used to an- alyze the trend relationship between alternatives and reference series. And then an RSM model is obtained, which can be used to calculate all alternatives and obtain ranking results. A real world application is introduced to illustrate the utilization of the model for the weapon selection problem. The results show that this model can be used to help decision-makers to make a quick comparison of alternatives and select a proper weapon system from multiple alternatives, which is an effective and adaptable method for solving the weapon system selection problem.展开更多
Identification of security risk factors for small reservoirs is the basis for implementation of early warning systems.The manner of identification of the factors for small reservoirs is of practical significance when ...Identification of security risk factors for small reservoirs is the basis for implementation of early warning systems.The manner of identification of the factors for small reservoirs is of practical significance when data are incomplete.The existing grey relational models have some disadvantages in measuring the correlation between categorical data sequences.To this end,this paper introduces a new grey relational model to analyze heterogeneous data.In this study,a set of security risk factors for small reservoirs was first constructed based on theoretical analysis,and heterogeneous data of these factors were recorded as sequences.The sequences were regarded as random variables,and the information entropy and conditional entropy between sequences were measured to analyze the relational degree between risk factors.Then,a new grey relational analysis model for heterogeneous data was constructed,and a comprehensive security risk factor identification method was developed.A case study of small reservoirs in Guangxi Zhuang Autonomous Region in China shows that the model constructed in this study is applicable to security risk factor identification for small reservoirs with heterogeneous and sparse data.展开更多
The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process pa...The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process parameters are welding speed,tool rotation speed,shoulder diameter and plunging depth.The experiments were carried out by using Taguchi's L18 factorial design of experiment.The processes parameters were optimized and ranked the parameters based on the GRA.The percentage influence of each process parameter on the weld quality was also quantified.A validation experimental run was conducted using optimal process condition,which was obtained from the analysis,to show the improvement in mechanical properties of the joint.This study also shows the feasibility of the GRA with Taguchi technique for improvement in welding quality of magnesium alloy.展开更多
To overcome the too fine-grained granularity problem of multivariate grey incidence analysis and to explore the comprehensive incidence analysis model, three multivariate grey incidences degree models based on princip...To overcome the too fine-grained granularity problem of multivariate grey incidence analysis and to explore the comprehensive incidence analysis model, three multivariate grey incidences degree models based on principal component analysis (PCA) are proposed. Firstly, the PCA method is introduced to extract the feature sequences of a behavioral matrix. Then, the grey incidence analysis between two behavioral matrices is transformed into the similarity and nearness measure between their feature sequences. Based on the classic grey incidence analysis theory, absolute and relative incidence degree models for feature sequences are constructed, and a comprehensive grey incidence model is proposed. Furthermore, the properties of models are researched. It proves that the proposed models satisfy the properties of translation invariance, multiple transformation invariance, and axioms of the grey incidence analysis, respectively. Finally, a case is studied. The results illustrate that the model is effective than other multivariate grey incidence analysis models.展开更多
The strength of the mould cavity in sand casting is very much significant to attain high-quality castings. Optimization of green sand process parameters plays a vital role in minimizing casting defects. In the present...The strength of the mould cavity in sand casting is very much significant to attain high-quality castings. Optimization of green sand process parameters plays a vital role in minimizing casting defects. In the present research work, the effect of process parameters such as AFS grain fineness number, water, molasses, bentonite, fly ash, and ramming, and their levels on the resultant mould properties were investigated and optimized using Taguchi based grey relational analysis. The Taguchi L18 orthogonal array and analysis of variance(ANOVA) were used. The quality characteristics viz., green compression strength, permeability, bulk density, mould hardness and shatter index of green sand mould were optimized using grey relational grade, based on the experiments designed using Taguchi's Design of Experiments. ANOVA analysis indicated that water content is the most influential parameter followed by bentonite, and degree of ramming that contributes to the quality characteristics. The results are confirmed by calculating confidence intervals, which lies within the interval limits. Finally, microstructure observations and X-ray diffraction analysis have been performed for the optimal sand parametric combination. Results show that presence of maximum amount of SiO_2, which might be the reason for enhancement of the physical properties of the sand.展开更多
The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence t...The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence that is applied to medical study was built by the authors. An example was given to demonstrate it. The superiority of GRA was recounted briefly.展开更多
[Objective] The aim was to study the main rainfall factors influencing runoff and sediment in the sloping farmland with different plants in the central south of Shandong Province.[Method] Through grey relational analy...[Objective] The aim was to study the main rainfall factors influencing runoff and sediment in the sloping farmland with different plants in the central south of Shandong Province.[Method] Through grey relational analysis,the effects of different rainfall factors on runoff and sediment with different plants in the central south of Shandong were studied.[Result] In the sloping farmland with different plants,the effects of rainfall factors on runoff and sediment weren’t consistent.Rainfall was the dominant influencing factor of runoff,but PI30 had the greatest influence on runoff in natural grassland.Meanwhile,rainfall intensity was the main influencing factor of sediment,but PI had the greatest influence on sediment in Astragalus adsurgens Pall.plot.The compound factor had the minimal influence on runoff and sediment in Arachis hypogaea plot and natural grassland.In A.adsurgens Pall.plot,rainfall intensity had the minimal impact on runoff,but the compound factor had the least effect on sediment.[Conclusion] The study could provide theoretical references for the comprehensive control of slope soil erosion,the optimum utilization and sustainable development of land.展开更多
This paper analyzes the relationship between rural finance and the rural economy of Sichuan Province from 1999 to 2009 by using the sequential growth rate of the gross value of farming, forestry, animal husbandry and ...This paper analyzes the relationship between rural finance and the rural economy of Sichuan Province from 1999 to 2009 by using the sequential growth rate of the gross value of farming, forestry, animal husbandry and fishery and the sequential growth rate of the per capital total income of rural households as the indicators of rural economic development; and taking the volume of deposit, volume of credit, volume of agricultural credit and the credit volume of township enterprises as the indicators of rural financial development; as well as the method of grey correlation analysis. The results show that there is an obvious positive correlation between them, and the development of country finance has the closest connection with the sequential growth rate of farming, forestry, animal husbandry, sideline production and fishery. The loan scale of township enterprises has the biggest influence on the increase of the rural economy. The countermeasures are put forward, covering optimizing investment structure; supporting the development of township enterprises; encouraging loan; actively lightening the financial difficulties in the process of developing rural economy; innovating and exploring; and promoting the diversified development of rural finance.展开更多
In the stainless steel 304 (SUS 304) wire drawing process, optimizing the die life and wire tensile strength, which are the larger-the-better quality characteristics (QCH) types, is of main interest. Three control...In the stainless steel 304 (SUS 304) wire drawing process, optimizing the die life and wire tensile strength, which are the larger-the-better quality characteristics (QCH) types, is of main interest. Three control factors, involving reduction ratio, lubricant temperature, and drawing speed, were investigated utilizing L9(34) orthogonal array (OA). The grey relational analysis was conducted for the normalized signal-to-noise (S/N) ratios. The ordinal value of the grey grade was then used to decide optimal factor levels. The anticipated improvements in die life and wire tensile strength were estimated 25.31 h and 22.50 kg/mm2, respectively. To decide the significant factor which had effect on each QCH and predict the average value of each QCH, analysis of variance (ANOVA) was performed for S/N ratio and QCH. Confirmation experiments were then conducted, where a good overlap was noticed between the predicted and confirnation intervals for each QCH. The Hotelling T2 and the sample generalized variance control charts were finally utilized in controlling and monitoring future production. In conclusion, the grey relational analysis utilizing Taguchi method is an effective approach for optimizing the die life and wire tensile strength for SUS wire drawing process. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute "characteristic" spectral region, 160 samples o...The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute "characteristic" spectral region, 160 samples of tobacco were surveyed by NIR. Next, the whole spectral region was randomly divided into six regions, and the values of association coefficients and correlation orders of different regions were computed for total sugar, reducing sugar and nicotine. Moreover, two regions that owned the largest value of association coefficient were regarded as "characteristic" spectral region of a model. Finally, the quantitative analysis models of different components were established via the partial least squares method, and the common selection methods of spectral region were compared. The simulation results indicate that the models to choose the spectral region based on grey correlation analysis are more effective than the common selection methods of spectral region, the optimized time of algorithm is shorter, the prediction precision of the models is higher and generalization ability for quantitative analysis results is stronger. This research can provide the support for the quantitative analysis models of NIR spectra and new idea for commercial analysis software of NIR. So, it has a high application value in the analysis of NIR spectra.展开更多
Given a non-equidistant sequence or an equidistant series with one or more outliers, a grey interpolation approach considering the time lags is established for producing the missing data or correcting the abnormal val...Given a non-equidistant sequence or an equidistant series with one or more outliers, a grey interpolation approach considering the time lags is established for producing the missing data or correcting the abnormal values. To accomplish this, a new grey incidence model, called the grey dynamic incidence model GDIM(t), is constructed for determining whether the factors are effective to the known factor and what the time lag is between a useful factor and the specified sequence. Based on the results of the GDIM(t) model, two programming problems are designed to obtain the upper and lower bounds of the unknown or abnormal values which are regarded as grey numbers. The solutions based on the particle swarm optimization(PSO) for the nonlinear programming problems are given. To explain how it can be used in practice, this new grey interpolation approach is applied to correct an abnormal value in the sequence of an agriculture environment problem.展开更多
The method of grey interrelation analysis is adopted for the analysis of the relationship between the amount of rare earths applied and the factors of the soil in increasing cotton production in Kazuo County, Liaonin...The method of grey interrelation analysis is adopted for the analysis of the relationship between the amount of rare earths applied and the factors of the soil in increasing cotton production in Kazuo County, Liaoning Province. The results show that there is an intimate relation between the use of the RE and the elements in the soil. The pH value, total K, and total P are the main factors influencing the relation, and the total N, hydrolytable N, organic matter, K2O and P2O5 are the secondary factors. This provides a scientific basis for the use of the RE.展开更多
The agronomic traits of the new wheat variety Anmai 1241 were comprehensively evaluated,in order to provide comprehensive and objective theoretical basis for further improvement and production utilization of this vari...The agronomic traits of the new wheat variety Anmai 1241 were comprehensively evaluated,in order to provide comprehensive and objective theoretical basis for further improvement and production utilization of this variety.The winter water production test results of Anmai 1241 in 14 pilot sites of Henan Seed Management Station from 2016 to 2017 were summarized.The comprehensive performance of 11 agronomic traits of Anmai 1241 in different tests sites in Henan Province was evaluated by the grey correlation analysis and clustering analysis methods.The results showed that among the observed values of 11 traits,the variation coefficient,correlation degree and weight of black embryo rate were 181.64%,0.6679 and 0.1051,respectively.The clustering analysis showed that the 11 traits could be divided into 3 groups.The first type of traits(yield,number of grains per ear and 1000-grain weight)and the third group of traits(percentage of earbearing tillers,number of productive tillers and volume weight)belonged to the yield factor traits,and the sum of their weights was 0.5242.Yield and its related factors played an important role in the variety evaluation of Anmai 1241,and the effect of black embryo on yield should be eliminated in variety improvement.展开更多
According to the data from Henan Statistical Yearbook from 2002 to 2008, from production capital, production conditions, labour inputs and financial support, this paper selects 11 variables influencing comprehensive p...According to the data from Henan Statistical Yearbook from 2002 to 2008, from production capital, production conditions, labour inputs and financial support, this paper selects 11 variables influencing comprehensive productivity of agriculture in Henan Province. Through calculation and analysis of grey correlation of variables and comprehensive productivity of agriculture, this paper determines the impact of different variables on comprehensive productivity of agriculture. The results show that the agricultural capital has become the most important factor influencing comprehensive productivity of agriculture in Henan Province, while the impact of production conditions, labour inputs and financial support on comprehensive productivity of agriculture in Henan Province diminishes in turn. Corresponding countermeasures and suggestions are put forward to promote the sustainable development of comprehensive productivity of agriculture in Henan Province as follows: strengthen agricultural financial system building, and ensure agricultural production expenditure; scientifically arrange allocation of agricultural resources, and improve agricultural production conditions; carry out training of agricultural skills, and elevate the quality of agricultural labour forces; increase financial expenditure for agricultural production, and optimize financial expenditure structure.展开更多
Grey relational analysis is one of the most important methods in water quality evaluation system. As the traditional grey relational analysis has the defects of homogenization in static resolution ratio, small discrim...Grey relational analysis is one of the most important methods in water quality evaluation system. As the traditional grey relational analysis has the defects of homogenization in static resolution ratio, small discrimination in correlation degree, and low precision in the weight of impact factors, this paper proposed an advanced grey relational analysis that used dynamic resolution ratio and comprehensive evaluation indicators. This method has been applied in the MIS software which monitors and evaluates the water quality in the lakes of the Four-Lake Basin. Compared with the traditional grey relational analysis and the cluster-factor analysis, this method could effectively enhance the reliability and accuracy of the results.展开更多
The future development of cities has a great relationship with economic vitality.To determine the size of the economic vitality and its main influencing factors.This article takes some cities in China as examples.Firs...The future development of cities has a great relationship with economic vitality.To determine the size of the economic vitality and its main influencing factors.This article takes some cities in China as examples.First,determine the main factors.Aiming at many factors,this paper starts from the perspective of population changes in different cities and changes in corporate vitality.After applying the rough set theory to objectively evaluate index weights,the main factors are screened out.Then,the weights of the corresponding evaluation indexes of each group of cities are calculated by a multiple linear regression to a weighted index system,and then the cities are ranked using the gray correlation analysis method.Finally,we get the ranking of the economic vitality level of different cities.Finally,suggestions are made based on the weighting factors of major factors and economic vitality.展开更多
文摘We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.
文摘Natural fibre reinforced polymer composite(NFRPC)materials are gaining popularity in the modern world due to their eco-friendliness,lightweight nature,life-cycle superiority,biodegradability,low cost,and noble mechanical properties.Due to the wide variety of materials available that have comparable attributes and satisfy the requirements of the product design specification,material selection has become a crucial component of design for engineers.This paper discusses the study’s findings in choosing the suitable thermoplastic matrices of Natural Fibre Composites for Cyclist Helmet utilising the DMAIC,and GRA approaches.The results are based on integrating two decision methods implemented utilising two distinct decision-making approaches:qualitative and quantitative.This study suggested thermoplastic polyethylene as a particularly ideal matrix in composite cyclist helmets during the selection process for the best thermoplastic matrices material using the 6σtechnique,with the decision based on the highest performance,the lightest weight,and the most environmentally friendly criteria.The DMAIC and GRA approach significantly influenced the material selection process by offering different tools for each phase.In the future study,selection technique may have been more exhaustive if more information from other factors had been added.
文摘This paper proposes a multi-criteria decision-making (MCGDM) method based on the improved single-valued neutrosophic Hamacher weighted averaging (ISNHWA) operator and grey relational analysis (GRA) to overcome the limitations of present methods based on aggregation operators. First, the limitations of several existing single-valued neutrosophic weighted averaging aggregation operators (i.e. , the single-valued neutrosophic weighted averaging, single-valued neutrosophic weighted algebraic averaging, single-valued neutrosophic weighted Einstein averaging, single-valued neutrosophic Frank weighted averaging, and single-valued neutrosophic Hamacher weighted averaging operators), which can produce some indeterminate terms in the aggregation process, are discussed. Second, an ISNHWA operator was developed to overcome the limitations of existing operators. Third, the properties of the proposed operator, including idempotency, boundedness, monotonicity, and commutativity, were analyzed. Application examples confirmed that the ISNHWA operator and the proposed MCGDM method are rational and effective. The proposed improved ISNHWA operator and MCGDM method can overcome the indeterminate results in some special cases in existing single-valued neutrosophic weighted averaging aggregation operators and MCGDM methods.
文摘To evaluate the effectiveness of weapon systems, the advantages and disadvantages of grey relational analysis and TOPSIS for multiattribute decision-making is pointed out, and an effectiveness evaluation model of weapon systems by combining grey relational analysis and TOPSIS is proposed. The model aggregates the grey relational grade and the distance to a new integrated closeness and reflects not only the trend but also the situation of the alternative. The example illuminates that the model is effective for the effectiveness evaluation of weapon systems.
基金supported by the National Natural Science Foundation of China(51375389)
文摘A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making (MADM) problem. This paper proposes a new mathematical model based on the response surface method (RSM) and the grey relational analysis (GRA). RSM is used to obtain the experimental points and analyze the factors that have a significant impact on the selection results. GRA is used to an- alyze the trend relationship between alternatives and reference series. And then an RSM model is obtained, which can be used to calculate all alternatives and obtain ranking results. A real world application is introduced to illustrate the utilization of the model for the weapon selection problem. The results show that this model can be used to help decision-makers to make a quick comparison of alternatives and select a proper weapon system from multiple alternatives, which is an effective and adaptable method for solving the weapon system selection problem.
基金supported by the National Nature Science Foundation of China(Grant No.71401052)the National Social Science Foundation of China(Grant No.17BGL156)the Key Project of the National Social Science Foundation of China(Grant No.14AZD024)
文摘Identification of security risk factors for small reservoirs is the basis for implementation of early warning systems.The manner of identification of the factors for small reservoirs is of practical significance when data are incomplete.The existing grey relational models have some disadvantages in measuring the correlation between categorical data sequences.To this end,this paper introduces a new grey relational model to analyze heterogeneous data.In this study,a set of security risk factors for small reservoirs was first constructed based on theoretical analysis,and heterogeneous data of these factors were recorded as sequences.The sequences were regarded as random variables,and the information entropy and conditional entropy between sequences were measured to analyze the relational degree between risk factors.Then,a new grey relational analysis model for heterogeneous data was constructed,and a comprehensive security risk factor identification method was developed.A case study of small reservoirs in Guangxi Zhuang Autonomous Region in China shows that the model constructed in this study is applicable to security risk factor identification for small reservoirs with heterogeneous and sparse data.
基金The authors acknowledge the Science and Engineering Research Board,Department of Science and Technology,India,for funding the present research work[grant number SERB/F/2767/2012-13].
文摘The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process parameters are welding speed,tool rotation speed,shoulder diameter and plunging depth.The experiments were carried out by using Taguchi's L18 factorial design of experiment.The processes parameters were optimized and ranked the parameters based on the GRA.The percentage influence of each process parameter on the weld quality was also quantified.A validation experimental run was conducted using optimal process condition,which was obtained from the analysis,to show the improvement in mechanical properties of the joint.This study also shows the feasibility of the GRA with Taguchi technique for improvement in welding quality of magnesium alloy.
基金supported by the National Natural Science Foundation of China(71401052)the Key Project of National Social Science Fund of China(12AZD108)+2 种基金the Doctoral Fund of Ministry of Education(20120094120024)the Philosophy and Social Science Fund of Jiangsu Province Universities(2013SJD630073)the Central University Basic Service Project Fee of Hohai University(2011B09914)
文摘To overcome the too fine-grained granularity problem of multivariate grey incidence analysis and to explore the comprehensive incidence analysis model, three multivariate grey incidences degree models based on principal component analysis (PCA) are proposed. Firstly, the PCA method is introduced to extract the feature sequences of a behavioral matrix. Then, the grey incidence analysis between two behavioral matrices is transformed into the similarity and nearness measure between their feature sequences. Based on the classic grey incidence analysis theory, absolute and relative incidence degree models for feature sequences are constructed, and a comprehensive grey incidence model is proposed. Furthermore, the properties of models are researched. It proves that the proposed models satisfy the properties of translation invariance, multiple transformation invariance, and axioms of the grey incidence analysis, respectively. Finally, a case is studied. The results illustrate that the model is effective than other multivariate grey incidence analysis models.
基金financially supported by the National Institute of Technology,Manipur,India
文摘The strength of the mould cavity in sand casting is very much significant to attain high-quality castings. Optimization of green sand process parameters plays a vital role in minimizing casting defects. In the present research work, the effect of process parameters such as AFS grain fineness number, water, molasses, bentonite, fly ash, and ramming, and their levels on the resultant mould properties were investigated and optimized using Taguchi based grey relational analysis. The Taguchi L18 orthogonal array and analysis of variance(ANOVA) were used. The quality characteristics viz., green compression strength, permeability, bulk density, mould hardness and shatter index of green sand mould were optimized using grey relational grade, based on the experiments designed using Taguchi's Design of Experiments. ANOVA analysis indicated that water content is the most influential parameter followed by bentonite, and degree of ramming that contributes to the quality characteristics. The results are confirmed by calculating confidence intervals, which lies within the interval limits. Finally, microstructure observations and X-ray diffraction analysis have been performed for the optimal sand parametric combination. Results show that presence of maximum amount of SiO_2, which might be the reason for enhancement of the physical properties of the sand.
文摘The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence that is applied to medical study was built by the authors. An example was given to demonstrate it. The superiority of GRA was recounted briefly.
基金Supported by Project of Shandong Water Resources Department" Study on the Mechanism and Comprehensive Control Benefit of Soil Erosion in the Typical Eroded Area of Shandong"
文摘[Objective] The aim was to study the main rainfall factors influencing runoff and sediment in the sloping farmland with different plants in the central south of Shandong Province.[Method] Through grey relational analysis,the effects of different rainfall factors on runoff and sediment with different plants in the central south of Shandong were studied.[Result] In the sloping farmland with different plants,the effects of rainfall factors on runoff and sediment weren’t consistent.Rainfall was the dominant influencing factor of runoff,but PI30 had the greatest influence on runoff in natural grassland.Meanwhile,rainfall intensity was the main influencing factor of sediment,but PI had the greatest influence on sediment in Astragalus adsurgens Pall.plot.The compound factor had the minimal influence on runoff and sediment in Arachis hypogaea plot and natural grassland.In A.adsurgens Pall.plot,rainfall intensity had the minimal impact on runoff,but the compound factor had the least effect on sediment.[Conclusion] The study could provide theoretical references for the comprehensive control of slope soil erosion,the optimum utilization and sustainable development of land.
文摘This paper analyzes the relationship between rural finance and the rural economy of Sichuan Province from 1999 to 2009 by using the sequential growth rate of the gross value of farming, forestry, animal husbandry and fishery and the sequential growth rate of the per capital total income of rural households as the indicators of rural economic development; and taking the volume of deposit, volume of credit, volume of agricultural credit and the credit volume of township enterprises as the indicators of rural financial development; as well as the method of grey correlation analysis. The results show that there is an obvious positive correlation between them, and the development of country finance has the closest connection with the sequential growth rate of farming, forestry, animal husbandry, sideline production and fishery. The loan scale of township enterprises has the biggest influence on the increase of the rural economy. The countermeasures are put forward, covering optimizing investment structure; supporting the development of township enterprises; encouraging loan; actively lightening the financial difficulties in the process of developing rural economy; innovating and exploring; and promoting the diversified development of rural finance.
文摘In the stainless steel 304 (SUS 304) wire drawing process, optimizing the die life and wire tensile strength, which are the larger-the-better quality characteristics (QCH) types, is of main interest. Three control factors, involving reduction ratio, lubricant temperature, and drawing speed, were investigated utilizing L9(34) orthogonal array (OA). The grey relational analysis was conducted for the normalized signal-to-noise (S/N) ratios. The ordinal value of the grey grade was then used to decide optimal factor levels. The anticipated improvements in die life and wire tensile strength were estimated 25.31 h and 22.50 kg/mm2, respectively. To decide the significant factor which had effect on each QCH and predict the average value of each QCH, analysis of variance (ANOVA) was performed for S/N ratio and QCH. Confirmation experiments were then conducted, where a good overlap was noticed between the predicted and confirnation intervals for each QCH. The Hotelling T2 and the sample generalized variance control charts were finally utilized in controlling and monitoring future production. In conclusion, the grey relational analysis utilizing Taguchi method is an effective approach for optimizing the die life and wire tensile strength for SUS wire drawing process. 2008 University of Science and Technology Beijing. All rights reserved.
基金Supported by the Key Projects in the National Science&Technology Pillar Program,China(No.2007BAI38B03)the Development Program of the Science and Technology of Jilin Province,China(Nos.200705C07,20075020)the 11th Five-Year Key Project of Jilin Province Education Department,China(No.[2010]205)
文摘The optimal selection method of spectral region based on the grey correlation analysis was applied in the analysis of near-infrared(NIR) spectra. In order to compute "characteristic" spectral region, 160 samples of tobacco were surveyed by NIR. Next, the whole spectral region was randomly divided into six regions, and the values of association coefficients and correlation orders of different regions were computed for total sugar, reducing sugar and nicotine. Moreover, two regions that owned the largest value of association coefficient were regarded as "characteristic" spectral region of a model. Finally, the quantitative analysis models of different components were established via the partial least squares method, and the common selection methods of spectral region were compared. The simulation results indicate that the models to choose the spectral region based on grey correlation analysis are more effective than the common selection methods of spectral region, the optimized time of algorithm is shorter, the prediction precision of the models is higher and generalization ability for quantitative analysis results is stronger. This research can provide the support for the quantitative analysis models of NIR spectra and new idea for commercial analysis software of NIR. So, it has a high application value in the analysis of NIR spectra.
基金supported by the National Natural Science Foundation of China(7137109871071077)+4 种基金Funding of Jiangsu Innovation Program for Graduate Education(KYZZ15 0093)Fundamental Research Funds for the Central Universities(2017301)Natural Science Fund Project of Colleges in Jiangsu Province(16KJD120001)Funding for Major Project of Jiangsu Social Science(16GLA001)Funding for Outstanding Doctoral Dissertation in Nanjing University of Aeronautics and Astronautics(BCXJ15-10)
文摘Given a non-equidistant sequence or an equidistant series with one or more outliers, a grey interpolation approach considering the time lags is established for producing the missing data or correcting the abnormal values. To accomplish this, a new grey incidence model, called the grey dynamic incidence model GDIM(t), is constructed for determining whether the factors are effective to the known factor and what the time lag is between a useful factor and the specified sequence. Based on the results of the GDIM(t) model, two programming problems are designed to obtain the upper and lower bounds of the unknown or abnormal values which are regarded as grey numbers. The solutions based on the particle swarm optimization(PSO) for the nonlinear programming problems are given. To explain how it can be used in practice, this new grey interpolation approach is applied to correct an abnormal value in the sequence of an agriculture environment problem.
文摘The method of grey interrelation analysis is adopted for the analysis of the relationship between the amount of rare earths applied and the factors of the soil in increasing cotton production in Kazuo County, Liaoning Province. The results show that there is an intimate relation between the use of the RE and the elements in the soil. The pH value, total K, and total P are the main factors influencing the relation, and the total N, hydrolytable N, organic matter, K2O and P2O5 are the secondary factors. This provides a scientific basis for the use of the RE.
文摘The agronomic traits of the new wheat variety Anmai 1241 were comprehensively evaluated,in order to provide comprehensive and objective theoretical basis for further improvement and production utilization of this variety.The winter water production test results of Anmai 1241 in 14 pilot sites of Henan Seed Management Station from 2016 to 2017 were summarized.The comprehensive performance of 11 agronomic traits of Anmai 1241 in different tests sites in Henan Province was evaluated by the grey correlation analysis and clustering analysis methods.The results showed that among the observed values of 11 traits,the variation coefficient,correlation degree and weight of black embryo rate were 181.64%,0.6679 and 0.1051,respectively.The clustering analysis showed that the 11 traits could be divided into 3 groups.The first type of traits(yield,number of grains per ear and 1000-grain weight)and the third group of traits(percentage of earbearing tillers,number of productive tillers and volume weight)belonged to the yield factor traits,and the sum of their weights was 0.5242.Yield and its related factors played an important role in the variety evaluation of Anmai 1241,and the effect of black embryo on yield should be eliminated in variety improvement.
文摘According to the data from Henan Statistical Yearbook from 2002 to 2008, from production capital, production conditions, labour inputs and financial support, this paper selects 11 variables influencing comprehensive productivity of agriculture in Henan Province. Through calculation and analysis of grey correlation of variables and comprehensive productivity of agriculture, this paper determines the impact of different variables on comprehensive productivity of agriculture. The results show that the agricultural capital has become the most important factor influencing comprehensive productivity of agriculture in Henan Province, while the impact of production conditions, labour inputs and financial support on comprehensive productivity of agriculture in Henan Province diminishes in turn. Corresponding countermeasures and suggestions are put forward to promote the sustainable development of comprehensive productivity of agriculture in Henan Province as follows: strengthen agricultural financial system building, and ensure agricultural production expenditure; scientifically arrange allocation of agricultural resources, and improve agricultural production conditions; carry out training of agricultural skills, and elevate the quality of agricultural labour forces; increase financial expenditure for agricultural production, and optimize financial expenditure structure.
基金Supported by Natural Science Foundation of China(41372155)
文摘Grey relational analysis is one of the most important methods in water quality evaluation system. As the traditional grey relational analysis has the defects of homogenization in static resolution ratio, small discrimination in correlation degree, and low precision in the weight of impact factors, this paper proposed an advanced grey relational analysis that used dynamic resolution ratio and comprehensive evaluation indicators. This method has been applied in the MIS software which monitors and evaluates the water quality in the lakes of the Four-Lake Basin. Compared with the traditional grey relational analysis and the cluster-factor analysis, this method could effectively enhance the reliability and accuracy of the results.
文摘The future development of cities has a great relationship with economic vitality.To determine the size of the economic vitality and its main influencing factors.This article takes some cities in China as examples.First,determine the main factors.Aiming at many factors,this paper starts from the perspective of population changes in different cities and changes in corporate vitality.After applying the rough set theory to objectively evaluate index weights,the main factors are screened out.Then,the weights of the corresponding evaluation indexes of each group of cities are calculated by a multiple linear regression to a weighted index system,and then the cities are ranked using the gray correlation analysis method.Finally,we get the ranking of the economic vitality level of different cities.Finally,suggestions are made based on the weighting factors of major factors and economic vitality.