PROGRESS OF GREY SYSTEM MODELS

The progress of grey system models is reviewed, and the general grey numbers, the grey sequence op- erators and several most commonly used grey system models are introduced, such as the absolute degree of grey incidence model, the grey cluster model based on endpoint triangular whitenization functions, the grey cluster model based on center-point triangular whitenization functions, the grey prediction model of the model GM （ 1,1）, and the weighted multi-attribute grey target decision model.

Study on the Yield Prediction Model of Processing Tomato Based on the Grey System Theory

[Objective] The research aimed to study the yield prediction model of processing tomato based on the grey system theory.[Method] The variation trend of processing tomato yield was studied by using the grey system theory,and GM（1,1）grey model of processing tomato yield prediction was established.The processing tomato yield in Xinjiang during 2001-2009 was as the example to carry out the instance analysis.[Result] The model had the high forecast accuracy and strong generalization ability,and was reliable for the prediction of recent processing tomato yield.[Conclusion] The research provided the reference for the macro-control of tomato industry,the processing and storage of tomato in Xinjiang.

APPLICATION OF GREY SYSTEM THEORY TO PROCESSING OF MEASURING DATA IN REVERSE ENGINEERING

The processing of measuri ng data plays an important role in reverse engineering. Based on grey system the ory, we first propose some methods to the processing of measuring data in revers e engineering. The measured data usually have some abnormalities. When the abnor mal data are eliminated by filtering, blanks are created. The grey generation an d GM(1,1) are used to create new data for these blanks. For the uneven data sequ en ce created by measuring error, the mean generation is used to smooth it and then the stepwise and smooth generations are used to improve the data sequence.

Grey systems for intelligent sensors and information processing

In a measurement system, new representation methods are necessary to maintain the uncertainty and to supply more powerful ability for reasoning and transformation between numerical system and symbolic system. A grey measurement system is discussed from the point of view of intelligent sensors and incomplete information processing compared with a numerical and symbolized measurement system. The methods of grey representation and information processing are proposed for data collection and reasoning. As a case study, multi-ultrasonic sensor systems are demonstrated to verify the effectiveness of the proposed methods.

Forecasting Model of Coal Requirement Quantity Based on Grey System Theory

The generally used methods of forecasting coal requirement quantity include the analogy method, the outside push method and the cause effect analysis method. However, the precision of forecasting results using these methods is lower. This paper uses the grey system theory, and sets up grey forecasting model GM (1, 3) to coal requirement quantity. The forecasting result for the Chinese coal requirement quantity coincides with the actual values, and this shows that the model is reliable. Finally, this model are used to forecast Chinese coal requirement quantity in the future ten years.

Investigation of the Interactive,Intimidating Relation Between Urbanization and the Environment in an Arid Area Based on Grey System Theory

Taking the Hexi Corridor in western China as an example, this paper studies the interactive intimate i relation between urbanization and the environment in add areas based on the grey system theory. The results show that the grey relational degree between urbanization and the environment is low in the agriculture-oriented cities, modest in the tourism-oriented cities and great in the industry-oriented cities. The changing trend of coupling degree between urbanization and the environment does not entirely agree with that of urbanization or the environment. It showed fluctuating trends, which reflects the compactness and properties of the different stages of the coupling states between urbanization and the environment. In order to achieve a harmonious development with the environment in add areas, traditional development ideas about urbanization should be revised and more attention should be paid to the effect of restriction of water resources and the ecological environment on the development of the economy and society.

Study on generation in grey system theory

Grey sequence generation can draw out and develop implied rules of the original data. Different kinds of generation methods were summarized and classified into two types: partial generation and whole generation. The average generation and stepwise ratio generation is disussed , the preference generation is regard as a special case of proportional division based on analysis geometric theory, propose an idea of using concave and convex status of discrete data to determine the generation coefficient. Based on the stepwise and smooth ratio generation, a tendency average generation is proposed and have a comparison using the data provided in papers listed in the references. The comparison proves that the new generation is better than the other two generations and errors are obviously reduced.

Predicting changes in Bitcoin price using grey system theory

Bitcoin is currently the leading global provider of cryptocurrency.Cryptocurrency allows users to safely and anonymously use the Internet to perform digital currency transfers and storage.In recent years,the Bitcoin network has attracted investors,businesses,and corporations while facilitating services and product deals.Moreover,Bitcoin has made itself the dominant source of decentralized cryptocurrency.While considerable research has been done concerning Bitcoin network analysis,limited research has been conducted on predicting the Bitcoin price.The purpose of this study is to predict the price of Bitcoin and changes therein using the grey system theory.The first order grey model(GM(1,1))is used for this purpose.It uses a firstorder differential equation to model the trend of time series.The results show that the GM(1,1)model predicts Bitcoin’s price accurately and that one can earn a maximum profit confidence level of approximately 98%by choosing the appropriate time frame and by managing investment assets.

Optimization approach hydroforming car beam billets based grey system theory

Perfect combination of structural size parameters of the hydroforming billets is essential to obtain even wall thicknesses of the car beam. Finite element （ FE ） analysis on hydroforming car beam was carried out, and the results were optimized according to multiple quality objectives by the grey system theory. With bending angle, bending radius and hight difference along the axis direction as variables, orthogonal FE analyses were conducted and the minimum and maximum wall thicknes ses of the billets with different sizes were obtained. Taking the minimum and maximum wall thick nesses as two references, the correlation coefficient between the data for reference and those for comparison by the grey system theory reduced multi objectives to a single quality objective, and the average correlation level of every billet facilitated the optimization of size parameters for hydroform ing car beam. The trial production showed that the optimization approach satisfied the need of hy droforming car beams.

Probability estimation based on grey system theory for simulation evaluation

In the evaluation of some simulation systems, only small samples data are gotten due to the limited conditions. In allusion to the evaluation problem of small sample data, an interval estimation approach with the improved grey confidence degree is proposed.On the basis of the definition of grey distance, three kinds of definition of the grey weight for every sample element in grey estimated value are put forward, and then the improved grey confidence degree is designed. In accordance with the new concept, the grey interval estimation for small sample data is deduced. Furthermore,the bootstrap method is applied for more accurate grey confidence interval. Through resampling of the bootstrap, numerous small samples with the corresponding confidence intervals can be obtained. Then the final confidence interval is calculated from the union of these grey confidence intervals. In the end, the simulation system evaluation using the proposed method is conducted. The simulation results show that the reasonable confidence interval is acquired, which demonstrates the feasibility and effectiveness of the proposed method.

Selecting Suitable Heat Source in Refinery for Multi-effect Distillation Based on Grey System Theory

For dealing with high-salinity wastewater in the refinery, the high cost of driving heat source is the disadvantage of multi-effect distillation (MED) so it is of great importance to evaluate the performance of low-temperature heat source for conducting MED and select the optimal temperature for it. Both the MED and the low-temperature heat sources studied in this paper were from a typical refinery located in northwestern China. Besides, a new methodology to evaluate heat sources as the optimal candidate was proposed for MED based on the grey system theory. Five process units, which included 18 fluids of the refinery, were named as the evaluation projects. Three factors, which included safety effects, total costs and characteristics of low-temperature heat sources were determined as the evaluation indexes, the values of which were established through the analyses. The results obtained through the grey correlation analyses have revealed that the grey correlation degrees of these units were 0.661(AVDU), 0.732 (#1 FCCU), 0.618 (#2 FCCU), 0.535 (#1 DCU), and 0.572 (#2 DCU), respectively. Thus, the optimal heat source was provided from #1 FCCU. Through further analyses of the fluids from #1 FCCU, the grey correlation degrees of the fluids were 0.597 (oil and gas at top of tower), 0.714 (recycle oil and gas), and 0.512 (diesel), respectively. Thus, the optimal heat source was the oil and gas recycle stream.

Using Grey System Theory for Earthquake Forecast

By combining conventional grey correlation analysis, grey clustering method and grey forecasting methods with our multi-goal forecast thoughts and the techniques of grey time series processing, we develop six different grey earthquake forecast models in this paper. Using the record of major earthquakes in Japan from 1872 to 1995, we forecast future earthquakes in Japan. We develop an earthquake forecast model. By using the major earthquakes in Japan from 1872 to 1984, we forecast earthquakes from 1985 to 1995 and check the precision of the grey earthquake models. We find that the grey system theory can be applied to earthquake forecast. We introduce the above analysis methods and give a real example to evaluate and forecast. We also further discuss the problems of how to improve the precision of earthquake forecast and how to strengthen the forecast models in future research.

Application of Grey System GM (1,1) model and unary linear regression model in coal consumption of Jilin Province

The data on the coal production and consumption in Jilin Province for the last ten years were collected,and the Grey System GM( 1,1) model and unary linear regression model were applied to predict the coal consumption of Jilin Production in 2014 and 2015. Through calculation,the predictive value on the coal consumption of Jilin Province was attained,namely consumption of 2014 is 114. 84 × 106 t and of 2015 is 117. 98 ×106t,respectively. Analysis of error data indicated that the predicted accuracy of Grey System GM( 1,1) model on the coal consumption in Jilin Province improved 0. 21% in comparison to unary linear regression model.

Application of Grey System Theory in Design For Cost (DFC)

Design For Cost (DFC) is a branch of Design For X (DFX). In this paper, wedefined DFC as a design method that analyzed and evaluated the product's life cycle cost (LCC), thenmodified the design to reduce the LCC. Nowadays it is a very difficult thing to obtain LCC data inChina or in developing countries. Statistical methods can not be used because available LCC data arefew. In order to solve this problem, we used grey system theory. Then relations of cost factorswere analyzed in LCC using grey relevant methods, and a GM(1,1) model between design parameters andLCC was established. Using this model, we can estimate and control LCC by changing design parametersat the beginning of the design stage.

Map Building for a Mobile Robot Based on Grey System Theory

In this paper, a new method for mobile robot map building based on grey system theory is presented, by which interpretation and integration of sonar readings can be solved robustly and efficiently. The conception of 'grey number is introduced to model and handle the uncertainty of sonar reading. A new data fusion approach based on grey system theory is proposed to construct environment model. Map building experiments are performed both on a platform of simulation and a real mobile robot. Experimental results show that our method is robust and accurate.

DISCUSSION ON AVERAGE GENERATION OF TWODIMENSIONAL DATA SEQUENCE IN GREY SYSTEM THEORY

An unequal time interval sequence or a sequence with blanks is usually completed with average generation in grey system theory. This paper discovers that there exists obvious errors when using average generation to generate internal points of non-consecutive neighbours. The average generation and the preference generation of the sequence are discussed, the concave and convex properties show the status of local sequence and propose a new idea for using the status to build up the criteria of choosing generation coefficient. Compared with the general average method of the one-dimensional data sequence, the two-dimensional data sequence is defined and its average generation is discussed, and the coefficient decision method for the preference generation is presented.

Prediction of the maximum water inflow in Pingdingshan No.8 mine based on grey system theory

In order to prevent and control the water inflow of mines, this paper built a new initial GM（1, 1） model to torecast the maximum water inflow according to the principle of new information. The effect of the new initial GM（1, 1） model is not ideal by the concrete example. Then according to the principle of making the sum of the squares of the difference between the calculated sequences and the original sequences, an optimized GM（1, I） model was established. The result shows that this method is a new prediction method which can predict the maximum water inflow accurately. It not only conforms to the guide- line of prevention primarily, but also provides reference standards to managers on making prevention measures.

Multi-attributed decision making for mining methods based on grey system and interval numbers

In the case of unknown weights, theories of multi-attributed decision making based on interval numbers and grey related analysis were used to optimize mining methods. As the representative of independence for the indicator, the smaller the correlation of indicators is, the greater the weight is. Hence, the weights of interval numbers of indicators were determined by using correlation coefficient. Relative closeness based on positive and negative ideal methods was calculated by introducing distance between interval numbers, which made decision making more rational and comprehensive. A new method of ranking interval numbers based on normal distribution was proposed for the optimization of mining methods, whose basic properties were discussed. Finally, the feasibility and effectiveness of this method were verified by theories and practice.

Structural damage identification using test static data based on grey system theory

A new structural damage identification method using limited test static displacement based on grey system theory is proposed in this paper. The grey relation coefficient of displacement curvature is defined and used to locate damage in the structure, and an iterative estimation scheme for solving nonlinear optimization programming problems based on the quadratic programming technique is used to identify the damage magnitude. A numerical example of a cantilever beam with single or multiple damages is used to examine the capability of the proposed grey-theory-based method to localize and identify damages. The factors of meas-urement noise and incomplete test data are also discussed. The numerical results showed that the damage in the structure can be localized correctly through using the grey-related coefficient of displacement curvature, and the damage magnitude can be iden-tified with a high degree of accuracy, regardless of the number of measured displacement nodes. This proposed method only requires limited static test data, which is easily available in practice, and has wide applications in structural damage detection.

Application of Grey System Theory to tree growth prediction

Based on Grey System theory, tree growth prediction models are developed by using 202 temporary plots and 206 stem analysis trees of Dahurian larch (Larix gemlinii Rupr) in 10 forestry bureaus of Yakeshi Forestry Administrative Bureau in Daxing’an Mountains of the Inner Mongolia Autonomous Region. By residual and posterior tests, their precisions are qualified. With several data, tree growth can be predicted using Grey System models. For DBH and volume, the fitting results of Grey System models are better than that of statistical models.