Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Optimal Management of Energy Storage Systems for Peak Shaving in a Smart Grid

In this paper,the installation of energy storage systems(EES)and their role in grid peak load shaving in two echelons,their distribution and generation are investigated.First,the optimal placement and capacity of the energy storage is taken into consideration,then,the charge-discharge strategy for this equipment is determined.Here,Genetic Algorithm(GA)and Particle Swarm Optimization(PSO)are used to calculate the minimum and maximum load in the network with the presence of energy storage systems.The energy storage systems were utilized in a distribution system with the aid of a peak load shaving approach.Ultimately,the battery charge-discharge is managed at any time during the day,considering the load consumption at each hour.The results depict that the load curve reached a constant state by managing charge-discharge with no significant changes.This shows the significance of such matters in terms of economy and technicality.

Grid Side Distributed Energy Storage Cloud Group End Region Hierarchical Time-Sharing Configuration Algorithm Based onMulti-Scale and Multi Feature Convolution Neural Network

There is instability in the distributed energy storage cloud group end region on the power grid side.In order to avoid large-scale fluctuating charging and discharging in the power grid environment and make the capacitor components showa continuous and stable charging and discharging state,a hierarchical time-sharing configuration algorithm of distributed energy storage cloud group end region on the power grid side based on multi-scale and multi feature convolution neural network is proposed.Firstly,a voltage stability analysis model based onmulti-scale and multi feature convolution neural network is constructed,and the multi-scale and multi feature convolution neural network is optimized based on Self-OrganizingMaps(SOM)algorithm to analyze the voltage stability of the cloud group end region of distributed energy storage on the grid side under the framework of credibility.According to the optimal scheduling objectives and network size,the distributed robust optimal configuration control model is solved under the framework of coordinated optimal scheduling at multiple time scales;Finally,the time series characteristics of regional power grid load and distributed generation are analyzed.According to the regional hierarchical time-sharing configuration model of“cloud”,“group”and“end”layer,the grid side distributed energy storage cloud group end regional hierarchical time-sharing configuration algorithm is realized.The experimental results show that after applying this algorithm,the best grid side distributed energy storage configuration scheme can be determined,and the stability of grid side distributed energy storage cloud group end region layered timesharing configuration can be improved.

Electromechanical Transient Modeling Analysis of Large-Scale New Energy Grid Connection

The synchronous virtual machine uses inverter power to imitate the performance of the conventional synchronous machine.It also has the same inertia,damping,frequency,voltage regulation,and other external performance as the generator.It is the key technology to realize new energy grid connections’stable and reliable operation.This project studies a dynamic simulation model of an extensive new energy power system based on the virtual synchronous motor.A new energy storage method is proposed.The mathematical energy storage model is established by combining the fixed rotor model of a synchronous virtual machine with the charge-discharge power,state of charge,operation efficiency,dead zone,and inverter constraint.The rapid conversion of energy storage devices absorbs the excess instantaneous kinetic energy caused by interference.The branch transient of the critical cut set in the system can be confined to a limited area.Thus,the virtual synchronizer’s kinetic and potential energy can be efficiently converted into an instantaneous state.The simulation of power system analysis software package(PSASP)verifies the correctness of the theory and algorithm in this paper.This paper provides a theoretical basis for improving the transient stability of new energy-connected power grids.

Hybrid Deep Learning Enabled Load Prediction for Energy Storage Systems

Recent economic growth and development have considerably raised energy consumption over the globe.Electric load prediction approaches become essential for effective planning,decision-making,and contract evaluation of the power systems.In order to achieve effective forecasting outcomes with minimumcomputation time,this study develops an improved whale optimization with deep learning enabled load prediction(IWO-DLELP)scheme for energy storage systems(ESS)in smart grid platform.The major intention of the IWO-DLELP technique is to effectually forecast the electric load in SG environment for designing proficient ESS.The proposed IWO-DLELP model initially undergoes pre-processing in two stages namely min-max normalization and feature selection.Besides,partition clustering approach is applied for the decomposition of data into distinct clusters with respect to distance and objective functions.Moreover,IWO with bidirectional gated recurrent unit(BiGRU)model is applied for the prediction of load and the hyperparameters are tuned by the use of IWO algorithm.The experiment analysis reported the enhanced results of the IWO-DLELP model over the recent methods interms of distinct evaluation measures.

Grid tie inverter energy stabilizing in smart distribution grid with energy storage

With the growing deployment of smart distribution grid,it has become urgent to investigate the smart distribution grid behavior during transient faults and improve the system stability.The feasibility of segmenting large power grids and multiple smart distribution grids interconnections using energy storage technology for improving the system dynamic stability was studied.The segmentation validity of the large power grids and smart distribution grid inverter output interconnections power system using energy storage technology was proved in terms of theoretical analysis.Then,the influences of the energy storage device location and capacity on the proposed method were discussed in detail.The conclusion is obtained that the ESD optimal locations are allocated at the tie line terminal buses in the interconnected grid,respectively.The effectiveness of the proposed method was verified by simulations in an actual power system.

Towards Implementation of Smart Grid: An Updated Review on Electrical Energy Storage Systems

A smart grid will require, to greater or lesser degrees, advanced tools for planning and operation, broadly accepted communications platforms, smart sensors and controls, and real-time pricing. The smart grid has been described as something of an ecosystem with constantly communication, proactive, and virtually self-aware. The use of smart grid has a lot of economical and environmental advantages;however it has a downside of instability and unpredictability introduced by distributed generation (DG) from renewable energy into the public electric systems. Variable energies such as solar and wind power have a lack of stability and to avoid short-term fluctuations in power supplied to the grid, a local storage subsystem could be used to provide higher quality and stability in the fed energy. Energy storage systems (ESSs) would be a facilitator of smart grid deployment and a “small amount” of storage would have a “great impact” on the future power grid. The smart grid, with its various superior communications and control features, would make it possible to integrate the potential application of widely dispersed battery storage systems as well other ESSs. This work deals with a detailed updated review on available ESSs applications in future smart power grids. It also highlights latest projects carried out on different ESSs throughout all around the world.

Electronic Controlled Energy Storage Devices and Applications in Future Smart Grid

This paper discusses the future power system consisting of distributed generations connected to local loads in the form of micro-grid systems.The benefits of having energy storage systems and the role of power electronics in micro-grid systems are presented.This paper also examines how micro-grids have a key role to play in the development of the smart grid.

Modeling and Simulation of a Hybrid Energy Storage System for Residential Grid-Tied Solar Microgrid Systems

Present-day power conversion and conditioning systems focus on transferring energy from a single type of power source into a single type of load or energy storage system (ESS). While these systems can be optimized within their specific topology (e.g. MPPT for solar applications and BMS for batteries), the topologies are not easily adapted to accept a wide range of power flow operating conditions. With a hybrid approach to energy storage and power flow, a system can be designed to operate at its most advantageous point, given the operating conditions. Based on the load demand, the system can select the optimal power source and ESS. This paper will investigate the feasibility of combining two types of power sources (main utility grid and photovoltaics (PV)) along with two types of ESS (ultra-capacitors and batteries). The simulation results will show the impact of a hybrid ESS on a grid-tied residential microgrid system performance under various operating scenarios.

Economic Feasibility of Micro-Grid Energy Storage and the Impact of Emerging Technologies on Its Viability

Currently, energy storage devices show great promise when used in micro-grid applications, and further advancements in this technology will lead to economically-viable and environmentally-friendly solutions in regards to residential energy consumption. Creating a 21st-century energy infrastructure will be fundamental to society in the coming decades and ensuring cost-effective means of doing so will lessen the burden on the average consumer. While current research has focused primarily on fundamental battery research, the economic viability for the average American consumer has been neglected in many cases. In this work, current and future methods of home energy storage are analyzed via a thorough literature review and the most promising current and near-future methods are explored. These methods include current Lithium-Ion Battery (LIB) technology, reused LIB from Electric Vehicles (EVs), Lithium Nickel manganese cobalt oxides (NMC) cathode composition and the utilization of silicon as an anode material. After the potential of these technologies is explored, an analysis of their economic viability for the average consumer is presented. The literature review demonstrates that the current state of LIB is very close to economically feasible;reused LIBs are less viable than new LIBs, and future LIB compositions show great promise in viability. This shows that within the next decade, micro-grids will be a reasonable alternative to utility energy harnessing techniques, and a major step towards green energy consumption will be realized. Hybrid energy storage systems, on the other hand, are shown to be economically infeasible, in the near future, due to their high cost per kWh. However, when analyzing the energy storage capabilities of these systems, it is shown that they may be vital in updated energy infrastructure and provide a cost saving.

Solid-state lithium-ion batteries for grid energy storage:opportunities and challenges

The energy crisis and environmental pollution drive more attention to the development and utilization of renewable energy.Considering the capricious nature of renewable energy resource,it has difficulty supplying electricity directly to consumers stably and efficiently,which calls for energy storage systems to collect energy and release electricity at peak periods.Due to their flexible power and energy,quick response,and high energy conversion efficiency,lithium-ion batteries stand out among multiple energy storage technologies and are rapidly deployed in the grid.Pursuing superior performance and ensuring the safety of energy storage systems,intrinsically safe solid-state electrolytes are expected as an ideal alternative to liquid electrolytes.In this review,we systematically evaluate the priorities and issues of traditional lithium-ion batteries in grid energy storage.Beyond lithium-ion batteries containing liquid electrolytes,solid-state lithium-ion batteries have the potential to play a more significant role in grid energy storage.The challenges of developing solid-state lithium-ion batteries,such as low ionic conductivity of the electrolyte,unstable electrode/electrolyte interface,and complicated fabrication process,are discussed in detail.Additionally,the safety of solid-state lithium-ion batteries is re-examined.Following the obtained insights,inspiring prospects for solid-state lithium-ion batteries in grid energy storage are depicted.

Coordinated control between a grid forming inverter and grid following inverters suppling power in a standalone microgrid

Battery energy storage systems,fuel cells,and photovoltaic generators are being adopted in distribution networks to achieve CO;emission reduction.These power sources require inverters to connect to AC networks.However,sub-networks,such as a microgrids containing inverter power sources,may be disconnected from the utility network and operated in a standalone mode during extended blackouts.This study focuses on a standalone microgrid supplied by inverter power sources without a synchronous generator and proposes a new microgrid inverter control.In this inverter control,a single grid forming inverter is operated as a master power source to determine frequency and voltage,and other inverters,called grid following inverters,are operated as subordinate power sources with active and reactive power control.The necessary functions in the energy management system are examined,and the coordinated operation of all inverters in the microgrid is demonstrated via simulation.

Exploration and Practice of Energy Storage Technology in SMEPC

Energy storage system plays an important role in smart grid. Analyzing from the view of existing status and problems facing Shanghai grid, the article puts forward the necessity of applying energy storage technology in a large urban grid and the achievements in the key technologies in Shanghai grid. As a comprehensive demonstration base for the pilot project of smart grid in Expo 2010 by the State Grid, the Shanghai Caoxi Energy Conversion Comprehensive Exhibit Station is also introduced in detail.

Enhancing Autonomy Capability in Regional Power Grids:A Strategic Planning Approach with Multiple Autonomous Evaluation Indexes

After the integration of large-scale DistributedGeneration(DG)into the distribution network,the randomness and volatility of its output result in a reduction of spatiotemporal alignment between power generation and demand in the distribution network,exacerbating the phenomenon of wind and solar power wastage.As a novel power system model,the fundamental concept of Regional Autonomous Power Grids(RAPGs)is to achieve localized management and energy autonomy,thereby facilitating the effective consumption of DGs.Therefore,this paper proposes a distributed resource planning strategy that enhances the autonomy capabilities of regional power grids by considering multiple evaluation indexes for autonomy.First,a regional Energy Storage(ES)configuration strategy is proposed.This strategy can select a suitable reference value for the upper limit of ES configuration based on the regional load andDGoutput to maximize the elimination of source load deviations in the region as the upper limit constraint of ES capacity.Then,a control strategy for regional ES is proposed,the charging and discharging reference line of ES is set,and multiple autonomy and economic indexes are used as objective functions to select different proportions of ES to control the distributed resources of the regional power grid and establish evaluation indexes of the internal regional generation and load power ratio,the proportion of power supply matching hours,new energy consumption rate and tie line power imbalance outside the region to evaluate changes in the regional autonomy capabilities.The final simulation results showthat in the real regional grid example,the planning method in the planning year in the region of the overall power supply matching hour ratio and new energy consumption rate increased by 3.9%and 4.8%on average,and the power imbalance of the tie line decreased by 7.8%on average.The proposed planning approach enables the maximization of regional autonomy while effectively smoothing the fluctuation of power exchange between the regional grid and the higher-level grid.This presents a rational and effective planning solution for the regional grid,facilitating the coordinated development between the region and the distribution network.

Network security protection technology for a cloud energy storage network controller

As part of the ongoing information revolution,smart power grid technology has become a key focus area for research into power systems.Intelligent electrical appliances are now an important component of power systems,providing a smart power grid with increased control,stability,and safety.Based on the secure communication requirements of cloud energy storage systems,this paper presents the design and development of a node controller for a cloud energy storage network.The function division and system deployment processes were carried out to ensure the security of the communication network used for the cloud energy storage system.Safety protection measures were proposed according to the demands of the communication network,allowing the system to run safely and stably.Finally,the effectiveness of the system was verified through a client-side distributed energy storage demonstration project in Suzhou,China.The system was observed to operate safely and stably,demonstrating good peak-clipping and valley filling effects,and improving the system load characteristics.

A More Renewable-Friendly Electrical Grid: Thermal Storage Refrigeration for Demand Response in California and Denmark

Energy storage technologies, which enable demand response, are being explored throughout the world as a component of strategies for switching to renewable intermittent energy sources and reducing peak loads. This study examines thermal storage refrigeration (TSR) technology as a case study for the potential value of demand response in California and Denmark. Using technical specifications from a TSR prototype developed at UC Davis and market data from California and Denmark, the analysis examines possible business models for the TSR refrigerators and highlights market characteristics that are important to its adoption. Results suggest that the TSR technology is not a viable option in the current market environment in Denmark, but could payback in less than 6 years in California if a part of a demand response based virtual power plant. In a hypothetical future scenario involving real-time pricing in the retail market, a high degree of price volatility would be needed to make TSR technology appealing to residential consumers. Based on this analysis, an interesting area of future work would focus on the market potential of TSR technology for commercial and industrial applications.

Smart Inverter Functionality Testing for Battery Energy Storage Systems

Variable distributed energy resources (DERs) such as photovoltaic (PV) systems and wind power systems require additional power resources to control the balance between supply and demand. Battery energy storage systems (BESSs) are one such possible resource for providing grid stability. It has been proposed that decentralized BESSs could help support microgrids (MGs) with intelligent control when advanced functionalities are implemented with variable DERs. One key challenge is developing and testing smart inverter controls for DERs. This paper presents a standardized method to test the interoperability and functionality of BESSs. First, a survey of grid-support standards prevalent in several countries was conducted. Then, the following four interoperability functions defined in IEC TR 61850-90-7 were tested: the specified active power from storage test (INV4), the var-priority Volt/VAR test (VV) and the specified power factor test (INV3) and frequency-watt control (FW). This study then out-lines the remaining technical issues related to basic BESS smart inverter test protocols.

Adaptive linear active disturbance-rejection control strategy reduces the impulse current of compressed air energy storage connected to the grid

The merits of compressed air energy storage(CAES)include large power generation capacity,long service life,and environmental safety.When a CAES plant is switched to the grid-connected mode and participates in grid regulation,using the traditional control mode with low accuracy can result in excess grid-connected impulse current and junction voltage.This occurs because the CAES output voltage does not match the frequency,amplitude,and phase of the power grid voltage.Therefore,an adaptive linear active disturbance-rejection control(A-LADRC)strategy was proposed.Based on the LADRC strategy,which is more accurate than the traditional proportional integral controller,the proposed controller is enhanced to allow adaptive adjustment of bandwidth parameters,resulting in improved accuracy and response speed.The problem of large impulse current when CAES is switched to the grid-connected mode is addressed,and the frequency fluctuation is reduced.Finally,the effectiveness of the proposed strategy in reducing the impact of CAES on the grid connection was verified using a hardware-in-the-loop simulation platform.The influence of the k value in the adaptive-adjustment formula on the A-LADRC was analyzed through simulation.The anti-interference performance of the control was verified by increasing and decreasing the load during the presynchronization process.

Virtual Transmission Solution Based on Battery Energy Storage Systems to Boost Transmission Capacity

The increasing penetration of variable renewable energy(VRE)generation along with the decommissioning of conventional power plants in Chile,has raised several operational challenges in the Chilean National Power Grid(NPG),including transmission congestion and VRE curtailment.To mitigate these limitations,an innovative virtual transmission solution based on battery energy storage systems(BESSs),known as grid booster(GB),has been proposed to increase the capacity of the main 500 kV corridor of the NPG.This paper analyzes the dynamic performance of the GB using a wide-area electromagnetic transient(EMT)model of the NPG.The GB project,composed of two 500 MVA BESS units at each extreme of the 500 kV corridor,allows increasing the transmission capacity for 15 min during N-1 contingencies,overcoming transmission limitations under normal operation conditions while maintaining system stability during faults.The dynamic behavior of the GB is also analyzed to control power flow as well as voltage stability.The results show that the GB is an effective solution to allow greater penetration of VRE generation while maintaining system stability in the NPG.

Optimal Operation of Micro-energy Grids Considering Shared Energy Storage Systems and Balanced Profit Allocations

Following the unprecedented generation of renewable energy,Energy Storage Systems(ESSs)have become essential for facilitating renewable consumption and maintaining reliability in energy networks.However,providing an individual ESS to a single customer is still a luxury.Thus,this paper aims to investigate whether the Shared-ESS can assist energy savings for multiple users through Peer-to-Peer(P2P)trading.Moreover,with the increasing number of market participants in the integrated energy system(IES),a benefit allocation scheme is necessary,ensuring reasonable benefits for every user in the network.Using the multiplayer cooperative game model,the nucleolus and the Shapley value methods are adopted to evaluate the benefit allocation between multiple users.Numerical analyses based on multiple micro-energy grids are performed,so as to assess the performance of the Shared-ESS and the proposed benefit allocation scheme.The results show that the micro-energy grid cluster can save as much as 38.15%of the total energy cost with Shared-ESS being equipped.The following conclusions can be drawn:the Shared-ESS can significantly reduce the operating costs of the micro-energy grid operator,promote the consumption of renewable energy,and play the role of peak-shaving and valley-filling during different energy usage periods.In addition,it is reflected that the multiplayer cooperative game model is effective in revealing the interaction between the micro-energy grids,which makes the distribution results more reasonable.