The force of grinding particle was disintegrated to study the physical and mathematical models. The grinding wheel can be characterized by grinding ratio, C, a steady constant. The moment and C of grinding wheel can b...The force of grinding particle was disintegrated to study the physical and mathematical models. The grinding wheel can be characterized by grinding ratio, C, a steady constant. The moment and C of grinding wheel can be estimated with electrical parameters. The grinding force can be calculated quite easily in this way.展开更多
（TiCp＋ TiBw）/Ti-6Al-4V titanium matrix composites（PTMCs） have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforc...（TiCp＋ TiBw）/Ti-6Al-4V titanium matrix composites（PTMCs） have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforcements, high strength and low thermal conductivity of Ti-6Al-4V alloy matrix. Grinding experiments with vitrified CBN wheels were conducted to analyze comparatively the grinding performance of PTMCs and Ti-6Al-4V alloy. Grinding force and force ratios, specific grinding energy, grinding temperature, surface roughness, ground surface appearance were discussed. The results show that the normal grinding force and the force ratios of PTMCs are much larger than that of Ti-6Al-4V alloy. Low depth of cut and high workpiece speed are generally beneficial to achieve the precision ground surface for PTMCs. The hard reinforcements of PTMCs are mainly removed in the ductile mode during grinding. However, the removal phenomenon of the reinforcements due to brittle fracture still exists, which contributes to the lower specific grinding energy and grinding temperature of PTMCs than Ti-6Al-4V alloy.展开更多
文摘The force of grinding particle was disintegrated to study the physical and mathematical models. The grinding wheel can be characterized by grinding ratio, C, a steady constant. The moment and C of grinding wheel can be estimated with electrical parameters. The grinding force can be calculated quite easily in this way.
基金co-supported by the National Natural Science Foundation of China (Nos. 51235004, 51375235)the Fundamental Research Funds for the Central Universities (No. NE2014103) of ChinaPriority Academic Program Development of Jiangsu Higher Education Institutions (PAPD) of China
文摘（TiCp＋ TiBw）/Ti-6Al-4V titanium matrix composites（PTMCs） have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforcements, high strength and low thermal conductivity of Ti-6Al-4V alloy matrix. Grinding experiments with vitrified CBN wheels were conducted to analyze comparatively the grinding performance of PTMCs and Ti-6Al-4V alloy. Grinding force and force ratios, specific grinding energy, grinding temperature, surface roughness, ground surface appearance were discussed. The results show that the normal grinding force and the force ratios of PTMCs are much larger than that of Ti-6Al-4V alloy. Low depth of cut and high workpiece speed are generally beneficial to achieve the precision ground surface for PTMCs. The hard reinforcements of PTMCs are mainly removed in the ductile mode during grinding. However, the removal phenomenon of the reinforcements due to brittle fracture still exists, which contributes to the lower specific grinding energy and grinding temperature of PTMCs than Ti-6Al-4V alloy.
