To estimate the near-fault inelastic response spectra, the accuracy of six existing strength reduction factors （R） proposed by different investigators were evaluated by using a suite of near-fault earthquake records...To estimate the near-fault inelastic response spectra, the accuracy of six existing strength reduction factors （R） proposed by different investigators were evaluated by using a suite of near-fault earthquake records with directivity-induced pulses. In the evaluation, the force-deformation relationship is modelled by elastic-perfectly plastic, bilinear and stiffness degrading models, and two site conditions, rock and soil, are considered. The R-value ratio （ratio of the R value obtained from the existing R-expressions （or the R-p-T relationships） to that from inelastic analyses） is used as a measurement parameter. Results show that the R-expressions proposed by Ordaz ＆ Perez-Rocha are the most suitable for near-fault ground motions, followed by the Newmark ＆ Hall and the Berrill et al. relationships. Based on an analysis using the near-fault ground motion dataset, new expressions of R that consider the effects of site conditions are presented and verified.展开更多
The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if...The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if not in a complicated topography.Testing results show that it is hardly to characterize the radio propagation properties for the antenna installed on the ground.In order to ensure a successful communication,the radio frequency(RF)wireless signal intensity monitor system was designed.We can get the wireless link transmission loss through measuring signal strength from received node.The test shows that the near-ground wireless signal propagation characteristics still can be characterized by the log distance propagation loss model.These results will conduce to studying the transmission characteristic of Near-Earth wireless signals and will predict the coverage of the earth's surface wireless sensor network.展开更多
A fragility calculation scheme is estabtished in this paper for porcelain-type equipments subjected to random earthquake ground motions. All steps of the method are illustrated by the seismic damage analysis of GW4-11...A fragility calculation scheme is estabtished in this paper for porcelain-type equipments subjected to random earthquake ground motions. All steps of the method are illustrated by the seismic damage analysis of GW4-110 disconnect switch. The model of the equipment is built applying the finite element method with flexible joints, and the seismic response of the equipment is analyzed using elastic time history method. On the base, according to the strength damage index and Monte-Carlo Method, the seismic damage ratios are counted and the seismic fragility curves are presented. Then the seismic damage of GW4-110 disconnect switch can be predicted.展开更多
In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from ...In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from the Central Appalachian region is used as a case study.At this mine,unexpected roof conditions were encountered during development below previously mined panels.Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels.Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries.The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations.The SRM-calculated stability factors were compared with observations made during the site visits,and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case.It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.展开更多
基金Foundation for Research and Science and Technology of New Zealand, Contract Number: C05X0208 and C05X0301the Foundation for Western Transportation Science and Technology Research, Contract No. 200831800098
文摘To estimate the near-fault inelastic response spectra, the accuracy of six existing strength reduction factors （R） proposed by different investigators were evaluated by using a suite of near-fault earthquake records with directivity-induced pulses. In the evaluation, the force-deformation relationship is modelled by elastic-perfectly plastic, bilinear and stiffness degrading models, and two site conditions, rock and soil, are considered. The R-value ratio （ratio of the R value obtained from the existing R-expressions （or the R-p-T relationships） to that from inelastic analyses） is used as a measurement parameter. Results show that the R-expressions proposed by Ordaz ＆ Perez-Rocha are the most suitable for near-fault ground motions, followed by the Newmark ＆ Hall and the Berrill et al. relationships. Based on an analysis using the near-fault ground motion dataset, new expressions of R that consider the effects of site conditions are presented and verified.
文摘The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if not in a complicated topography.Testing results show that it is hardly to characterize the radio propagation properties for the antenna installed on the ground.In order to ensure a successful communication,the radio frequency(RF)wireless signal intensity monitor system was designed.We can get the wireless link transmission loss through measuring signal strength from received node.The test shows that the near-ground wireless signal propagation characteristics still can be characterized by the log distance propagation loss model.These results will conduce to studying the transmission characteristic of Near-Earth wireless signals and will predict the coverage of the earth's surface wireless sensor network.
基金supported by the Science and Technology Commission of Shanghai Municipality (Grant No.04JC14035)
文摘A fragility calculation scheme is estabtished in this paper for porcelain-type equipments subjected to random earthquake ground motions. All steps of the method are illustrated by the seismic damage analysis of GW4-110 disconnect switch. The model of the equipment is built applying the finite element method with flexible joints, and the seismic response of the equipment is analyzed using elastic time history method. On the base, according to the strength damage index and Monte-Carlo Method, the seismic damage ratios are counted and the seismic fragility curves are presented. Then the seismic damage of GW4-110 disconnect switch can be predicted.
文摘In this paper,the advantage of using numerical models with the strength reduction method(SRM) to evaluate entry stability in complex multiple-seam conditions is demonstrated.A coal mine under variable topography from the Central Appalachian region is used as a case study.At this mine,unexpected roof conditions were encountered during development below previously mined panels.Stress mapping and observation of ground conditions were used to quantify the success of entry support systems in three room-and-pillar panels.Numerical model analyses were initially conducted to estimate the stresses induced by the multiple-seam mining at the locations of the affected entries.The SRM was used to quantify the stability factor of the supported roof of the entries at selected locations.The SRM-calculated stability factors were compared with observations made during the site visits,and the results demonstrate that the SRM adequately identifies the unexpected roof conditions in this complex case.It is concluded that the SRM can be used to effectively evaluate the likely success of roof supports and the stability condition of entries in coal mines.
