Alleppey is one of the thickly populated coastal towns of the Kerala state in southern India.Groundwater is the main source of drinking water for the 240,991 people living in this region.The groundwater is being extra...Alleppey is one of the thickly populated coastal towns of the Kerala state in southern India.Groundwater is the main source of drinking water for the 240,991 people living in this region.The groundwater is being extracted from a multi-layer aquifer system of unconsolidated to semi-consolidated sedimentary formations,which range in age from Recent to Tertiary.The public water distribution system uses dug and tube wells.Though there were reports on fluoride contamination,this study reports for the first time excess fluoride and excess salinity in the drinking water of the region.The quality parameters,like Electrical Conductivity(EC) ranges from 266 to 3900 μs/cm,the fluoride content ranges from 0.68 to2.88 mg/L,and the chloride ranges between the 5.7 to 1253 mg/L.The main water types are Na-HC03,NaCO3 and Na-Cl.The aqueous concentrations of F- and CO32- show positive correlation whereas F- and Ca2+ show negative correlation.The source of fluoride in the groundwater could be from dissolution of fluorapatite,which is a common mineral in the Tertiary sediments of the area.Long residence time,sediment-groundwater interaction and facies changes(Ca-HCO3 to Na-HCO3) during groundwater flow regime are the major factors responsible for the high fluoride content in the groundwater of the area.High strontium content and high EC in some of the wells indicate saline water intrusion that could be due to the excess pumping from the deeper aquifers of the area.The water quality index computation has revealed that 62%of groundwater belongs to poor quality and is not suitable for domestic purposes as per BIS and WHO standards.Since the groundwater is the only source of drinking water in the area,proper treatment strategies and regulating the groundwater extraction are required as the quality deterioration poses serious threat to human health.展开更多
Aquifer remediation for a contaminated site is complex, expensive, and long-term. Groundwater modelling is often used as a tool to evaluate remedial alternatives and to design a groundwater remediation system. Groundw...Aquifer remediation for a contaminated site is complex, expensive, and long-term. Groundwater modelling is often used as a tool to evaluate remedial alternatives and to design a groundwater remediation system. Groundwater modelling can also be used as a useful process to identify aquifer characteristics and contaminant behaviour that are not realized prior to modelling, to help diagnose what happened and why it happened at contaminant sites. Three real-world modelling cases are presented to demonstrate how groundwater modelling is applied to help understand contamination problems and how valuable the improved understanding is to decision-making and/or to remedial design.展开更多
Restoration of contaminated soil and groundwater could be divided into two phases. The first phase takes aim at reducing human being's health risks by active remediation, while the second phase aims at eliminating ec...Restoration of contaminated soil and groundwater could be divided into two phases. The first phase takes aim at reducing human being's health risks by active remediation, while the second phase aims at eliminating ecological risks by natural attenuation (NA). Because of cost-effective and sustainable cleanup, monitored natural attenuation (MNA) and enhanced natural attenuation (ENA) have been gaining more attention recently, especially in the respects of ecological risk-oriented contaminated land management and a follow-up measure after active remediation. The uses and procedures of MNA for contaminated site cleanup and remediation in USA and EU were introduced firstly, and then possible applications of MNA in China were suggested. More developments and practices of MNA and ENA for managing contaminated sites in China are expected.展开更多
Groundwater is an important source of freshwater for drinking and irrigation purposes, and hence protecting it against depletion and deterioration is extremely required. Groundwater could get contaminated physically, ...Groundwater is an important source of freshwater for drinking and irrigation purposes, and hence protecting it against depletion and deterioration is extremely required. Groundwater could get contaminated physically, chemically, or microbiologically. Each type of contamination is linked to different sources and in turn imposes different types of health problems and consequences. A water sample from Bahr Al-Baqar Wastewater drain and 13 groundwater samples were collected for physiochemical and bacteriological analyses to evaluate groundwater contamination in As-Salihiyyah and adjacent areas, east of Nile Delta of Egypt. Nitrate, COD, and BOD values collected from Bahr Al-Baqr drain and groundwater exceeded the Egyptian maximum permissible limit for drinking water (0.5, 6, 10, respectively). The total number of viable microorganisms (TVC) test for Bahr Al-Baqar drain was recorded as more than 300 CFU/mL, and the total coliform recorded 1100 MPN/100ml, indicating high level of contamination. The high count of the TVC (16-↑300 CFU/mL) for groundwater and the total coliform (3 - 1100 MPN/100ml) indicated that groundwater is contaminated and unsafe for drinking and might be affected by Bahr Al-Baqar wastewater drain.展开更多
Identification of the location and intensity of groundwater pollution source contributes to the effect of pollution remediation,and is called groundwater contaminant source identification.This is a kind of typical gro...Identification of the location and intensity of groundwater pollution source contributes to the effect of pollution remediation,and is called groundwater contaminant source identification.This is a kind of typical groundwater inverse problem,and the solution is usually ill-posed.Especially considering the spatial variability of hydraulic conductivity field,the identification process is more challenging.In this paper,the solution framework of groundwater contaminant source identification is composed with groundwater pollutant transport model(MT3DMS)and a data assimilation method(Iterative local update ensemble smoother,ILUES).In addition,Karhunen-Loève expansion technique is adopted as a PCA method to realize dimension reduction.In practical problems,the geostatistical method is usually used to characterize the hydraulic conductivity field,and only the contaminant source information is inversely calculated in the identification process.In this study,the identification of contaminant source information under Kriging K-field is compared with simultaneous identification of source information and K-field.The results indicate that it is necessary to carry out simultaneous identification under heterogeneous site,and ILUES has good performance in solving high-dimensional parameter inversion problems.展开更多
Groundwater contamination source identification(GCSI)is a prerequisite for contamination risk evaluation and efficient groundwater contamination remediation programs.The boundary condition generally is set as known va...Groundwater contamination source identification(GCSI)is a prerequisite for contamination risk evaluation and efficient groundwater contamination remediation programs.The boundary condition generally is set as known variables in previous GCSI studies.However,in many practical cases,the boundary condition is complicated and cannot be estimated accurately in advance.Setting the boundary condition as known variables may seriously deviate from the actual situation and lead to distorted identification results.And the results of GCSI are affected by multiple factors,including contaminant source information,model parameters,boundary condition,etc.Therefore,if the boundary condition is not estimated accurately,other factors will also be estimated inaccurately.This study focuses on the unknown boundary condition and proposed to identify three types of unknown variables(contaminant source information,model parameters and boundary condition)innovatively.When simulation-optimization(S-O)method is applied to GCSI,the huge computational load is usually reduced by building surrogate models.However,when building surrogate models,the researchers need to select the models and optimize the hyperparameters to make the model powerful,which can be a lengthy process.The automated machine learning(AutoML)method was used to build surrogate model,which automates the model selection and hyperparameter optimization in machine learning engineering,largely reducing human operations and saving time.The accuracy of AutoML surrogate model is compared with the surrogate model used in eXtreme Gradient Boosting method(XGBoost),random forest method(RF),extra trees regressor method(ETR)and elasticnet method(EN)respectively,which are automatically selected in AutoML engineering.The results show that the surrogate model constructed by AutoML method has the best accuracy compared with the other four methods.This study provides reliable and strong support for GCSI.展开更多
In abandoned mine sites, i.e., mine sites where mining operations have ended, wide spread contaminations are often evident, but the potential sources and pathways of contamination especially through the subsurface, ar...In abandoned mine sites, i.e., mine sites where mining operations have ended, wide spread contaminations are often evident, but the potential sources and pathways of contamination especially through the subsurface, are difficult to identify due to inadequate and sparse geochemical measurements available. Therefore, it is essential to design and implement a planned monitoring net-work to obtain essential information required for establishing the potential contamination source locations, i.e., waste dumps, tailing dams, pits and possible pathways through the subsurface, and to design a remediation strategy for rehabilitation. This study presents an illustrative application of modeling the flow and transport processes and monitoring network design in a study area hydrogeologically resembling an abandoned mine site in Queensland, Australia. In this preliminary study, the contaminant transport process modeled does not incorporate the reactive geochemistry of the contaminants. The transport process is modeled considering a generic conservative contaminant for the illustrative purpose of showing the potential application of an optimal monitoring design methodology. This study aims to design optimal monitoring network to: 1) minimize the contaminant solute mass estimation error;2) locate the plume boundary;3) select the monitoring locations with (potentially) high concentrations. A linked simulation optimization based methodology is utilized for optimal monitoring network design. The methodology is applied utilizing a recently developed software package CARE-GWMND, developed at James Cook University for optimal monitoring network design. Given the complexity of the groundwater systems and the sparsity of pollutant concentration observation data from the field, this software is capable of simulating the groundwater flow and solute transport with spatial interpolation of data from a sparse set of available data, and it utilizes the optimization algorithm to determine optimum locations for implementing monitoring wells.展开更多
An artificial effluent lagoon for storing wastewater were excavated in Jiayuguan City since 1994. As a part of a demonstration project of Sino Australia cooperation, an assessment of the environmental impact of the l...An artificial effluent lagoon for storing wastewater were excavated in Jiayuguan City since 1994. As a part of a demonstration project of Sino Australia cooperation, an assessment of the environmental impact of the lagoon was carried out. The assessment was based on field and laboratory tests and predictive model. The main impacts from the lagoon site are likely to be on the groundwater system, and, to a lesser extent, on ambient air quality in the vicinity. Currently it is expected that groundwater is being polluted with effluent from the effluent lagoon. Air pollution(odor nuisance) is mainly caused by untreated effluent in the irrigation channel. The impact of high total dissolved salt(TDS) on groundwater is likely to be significant in the long run if the lagoon is continuously used. There is, consequently, no likelihood of contamination of surface water system, particularly of the city water supply system, from infiltration of effluent at the lagoon.展开更多
The research intends to bring out the contribution of leachate on groundwater in two dumpsites in Nguru and Potiskum all in Yobe state,Nigeria.A total of seven(7)and eight(8)VES by Schlumberger electrode with the use ...The research intends to bring out the contribution of leachate on groundwater in two dumpsites in Nguru and Potiskum all in Yobe state,Nigeria.A total of seven(7)and eight(8)VES by Schlumberger electrode with the use of Wenner electrode configuration.The results were interpreted by the use of WinRESIST for VES and IPWIN2INV for ERT.The study pointed out that,the area in question is comprised of four layers of geoelectric such as the topsoil,clay,sand,sandy clay and sand.The range of the first resistivity layer was from 6.16Ωm to 332Ωm in the first geo-electric layer and its thickness range from 2.77 m to 37.7 m and a depth range of 2.77 m to 37.7 m.the range of the second resistivity layer was from 16.5Ωm to 37.9Ωm which has the range of its thickness from 4.1 m to 10.7 m.The range of the third resistivity layer was from 101.2Ωm to 288.2Ωm which has the range of its thickness from 38.9 m to 99.7 m,and the first aquifer in the area.The range of the first resistivity layer was from 100.7Ωm to 214.3Ωm which has the range of its thickness from 28.5 m to 94 m.The fifth layer which is the second aquifer and has resistivity from 254Ωm to 350Ωm with a very large thickness.The range of the first resistivity aquifer is from 101.2Ωm to 288.2Ωm and the range of the second resistivity aquifer is from 253.8Ωm to 350.1Ωm.The 2D ERT profiles unveiled areas with low resistant zones and later discussed as zones penetrated by contaminants originated from dumpsites whereas high resistant zones represent areas of low or non-conductive materials in the area.Data obtained from four dumpsites indicated that leachate of the waste dumpsites penetrated into aquifers and polluted the groundwater.The existence of contaminants in the water was noted by a decrease in the formation resistant values.It is seen,from the results of the survey(geophysical)that the water in the area is polluted and it accounts for the prevalence of any disease related to water that are common in the area.展开更多
Microbial Fe(Ⅲ)reduction is a significant driving force for the biogeochemical cycles of C,O,P,S,N,and dominates the natural bio-purification of contaminants in groundwater(e.g.,petroleum hydrocarbons,chlorinated eth...Microbial Fe(Ⅲ)reduction is a significant driving force for the biogeochemical cycles of C,O,P,S,N,and dominates the natural bio-purification of contaminants in groundwater(e.g.,petroleum hydrocarbons,chlorinated ethane,and chromium).In this review,the mechanisms and environmental significance of Fe(Ⅲ)(hydro)oxides bioreduction are summarized.Compared with crystalline Fe(Ⅲ)(hydro)oxides,amorphous Fe(m)(hydro)oxides are more bioavailable.Ligand and electron shuttle both play an important role in microbial Fe(Ⅲ)reduction.The restrictive factors of Fe(Ⅲ)(hydro)oxides bioreduction should be further investigated to reveal the characteristics and mechanisms of the process.It will improve the bioavailability of crystalline Fe(Ⅲ)(hydro)oxides and accelerate the anaerobic oxidation efficiency of the reduction state pollutants.Furthermore,the approach to extract,culture,and incubate the functional Fe(Ⅲ)reducing bacteria from actual complicated environment,and applying it to the bioremediation of organic,ammonia,and heavy metals contaminated groundwater will become a research topic in the future.There are a broad application prospects of Fe(Ⅲ)(hydro)oxides bioreduction to groundwater bioremediation,which includes the in situ injection and permeable reactive barriers and the innovative Kariz wells system.The study provides an important reference for the treatment of reduced pollutants in contaminated groundwater.展开更多
The permeable reactive barrier(PRB) has proven to be a costeffective technique to remediate the petro leum contaminated groundwater at a northeast field site in China. In this study, the geology, hydrogeology and co...The permeable reactive barrier(PRB) has proven to be a costeffective technique to remediate the petro leum contaminated groundwater at a northeast field site in China. In this study, the geology, hydrogeology and con tamination characterization of the field site were investigated and the natural hydrothermal palygorskite was chosen as a reactive medium. Furthermore, the adsorption of the total petroleum hydrocarbons(TPH) in the groundwater onto hydrothermal palygorskite and the adsorption kinetics were investigated. The results indicate that the removal rates of TPH, benzene, naphthalene and phenantharene could all reach up to 90% by hydrothermal palygorskite with a diameter of 0.25-2.00 mm that had been thermally pretreated at 140 ℃. The adsorption of TPH onto hydrothermal palygorskite after pretreatment followed a pseudosecondorder kinetic model and a Langmuir adsorption isotherm, suggesting that the theoretic adsorption capacity of hydrothermal palygorskite for adsorbate could be 4.2 g/g. Scan ning electron microscopy(SEM), infrared spectroscopy(IR), Xray diffraction(XRD) and Xray fluorescence spec troscopy(XRF) were carried out to analyze the adsorption mechanism. The results reveal that hydrothermal palygors kite is a fibrous silicate mineral enriched in Mg and A1 with large surface area and porosity. The dense cluster acicular and fibrous crystal of hydrothermal palygorskite, and its effect polar group OH played an important role in the physical and chemical adsorption processes of it for contaminants. This study has demonstrated hydrothermal paly gorskite is a reliable reactive medium for in situ remediation of petroleum contaminated groundwater at field sites.展开更多
There is a rapidly emerging and potentially huge market for the remediation of contaminated ground- water in China. The Chinese government published a Water Action Plan in April 2015, a Soil Action Plan in May 2016, a...There is a rapidly emerging and potentially huge market for the remediation of contaminated ground- water in China. The Chinese government published a Water Action Plan in April 2015, a Soil Action Plan in May 2016, and a draft Soil Pollution Prevention and Control Law in June 2017. All of these new policies and regulations put pressures on local governments and contaminated site owners, obliging them to conduct site investigation and to cleanup contaminated groundwater. The Chinese population in northern regions heavily depend on groundwater, with nearly 70% of water supply coming from aquifer sources in the Beijing-Tianjin-Hebei region. However, poor groundwater quality due to natural geochemical background and anthropogeic pollution is a serious concern, with poor or very poor quality water observed in nearly 80% of groundwater monitoring wells in 17 northern provinces. Shallow groundwater in many areas has been contaminated by toxic pollutants such as heavy metals and chlorinated organic compounds. There is an urgent need to better understand the situation and to conduct groundwater remediation at contaminated sites. The Chinese government is investing heavily in the research and development for groundwater remediation, which is expected to greatly add to the quality and quantity of groundwater remediation projects in the near future.展开更多
Groundwater contamination due to pesticide applications on agricultural lands is of great environmental concern. The mathematical models help to understand the mechanism of pesticide leaching in soils towards groundwa...Groundwater contamination due to pesticide applications on agricultural lands is of great environmental concern. The mathematical models help to understand the mechanism of pesticide leaching in soils towards groundwater. We developed a user-friendly model called ArcPRZM-3 by integrating widely used Pesticide Root Zone Model version 3 (PRZM-3) using Visual Basic and Geographic Information System (GIS) based Avenue programming. ArcPRZM-3 could be used to simulate pesticide leaching towards groundwater with user-friendly input interfaces coupled with databases of crops, soils and pesticides. The outputs from ArcPRZM-3 could be visualized in user-friendly formats of tables, charts and maps. In this study we evaluated ArcPRZM-3 model by simulating bentazon leaching in soil towards groundwater. ArcPRZM-3 was applied to 37 sites in Woodruff County, Arkansas, USA to observe the daily average dissolved bentazon concentration for soybean, sorghum and rice at a depth of 1.8 m for a period of two years. Nineteen ranks of bentazon leaching potential were obtained using ArcPRZM-3 for all sites having different soil and crop combinations. ArcPRZM-3 simulation results for bentazon were compatible with the field monitored data in term of relative ranking and trend, although some uncertainties exist. This study indicated that macropore flow mechanism would be important in analyzing the effect of irrigation on groundwater contamination due to pesticides. Overall, ArcPRZM-3 could be used to simulate pesticide leaching towards groundwater more efficiently and effectively as compared to PRZM-3.展开更多
Groundwater is the most appropriate and widely used source of drinking water, which is increasingly threatened by pollution from industrial and agricultural activities. To check the severity of the problem, 156 ground...Groundwater is the most appropriate and widely used source of drinking water, which is increasingly threatened by pollution from industrial and agricultural activities. To check the severity of the problem, 156 groundwater samples were collected from various depths (60-110 ft) of 52 different localities in Faisalabad city, the third largest metropolis in Pakistan, and analyzed for the metals (Zn, Cu, Cd, Ni, Pb, Mn and Fe) concentration in 2009. Quantification was done by using Flame Atomic Absorption Spectrophotometer technique and the results were compared with WHO standards for drinking water quality. Results showed that the levels of Cu, Mn and Fe were below the WHO standards while the concentrations of Zn, Cd, Ni and Pb were above the recommended levels of safe drinking water. Correlation analysis among the occurrence of these heavy metals revealed a highly significant and positive correlation of Mn with Zn and Fe. A significant and positive correlation of Cd was also found with Cu and groundwater depth showing that there is strong association between Cu-Cd pair and that the Cd concentration varies with depth of groundwater in the study area. Regional patterns of heavy metals occurrence were mapped using Geographical Information System (GIS) for the identification and demarcation of risk areas. The concentration maps may be used by policymakers of the city to mitigate groundwater pollution.展开更多
Bispyribac-sodium is a weakly acidic herbicide with high water solubility and is thus a potential source of groundwater contamination.Considering the risk inherent to the use of this herbicide,this study assessed the ...Bispyribac-sodium is a weakly acidic herbicide with high water solubility and is thus a potential source of groundwater contamination.Considering the risk inherent to the use of this herbicide,this study assessed the impacts of rice straw(RS)and biochar amendments on the adsorption and leaching behavior of bispyribac-sodium in soil.Biochars were produced from RS at different pyrolysis temperatures and characterized using various spectral techniques.Rice straw had a surface area of 3.996×10^(4)m^(2)kg^(-1),which increased under pyrolysis;biochars prepared at 350 and 550℃(RS350 and RS550)in a closed furnace with limited oxygen supply had a surface area of 5.763×10^(4)and 6.890×10^(4)m^(2)kg^(-1),respectively,and biochar prepared by purging the pyroformer with N2(RSC)had the highest surface area of 12.173×10^(4)m^(2)kg^(-1).After amendment with RS and biochar,soil Freundlich adsorption capacity(KF ads)increased to varying extents in the order RSC>RS350>RS550,from 2.89×10^(3)to 29.57×10^(3)mg^(1-1)/nkg^(-1)L1/n,compared to1.55×10^(3)mg^(1-1)/nkg^(-1)L1/nin unamended soil.The variability in KF ads of bispyribac-sodium amongst the RS-and biochar-amended soils was dependent on the surface area of the amendments.The desorption of bispyribac-sodium decreased in the RS-and biochar-amended soils and varied from90.45%to 95.20%in unamended soils and from 60.95%to 89.50%in amended soils.The adsorption and desorption of bispyribac-sodium varied significantly depending on its concentration and the type and application rate of soil amendment.Different leaching risk evaluation indices,viz.,modified leach index(M.LEACH),leach index(LEACH),groundwater ubiquity score(GUS),Hornsby index(HI),leaching index(LIN),and pesticide leaching potential(PLP)index,were used to assess the susceptibility of groundwater to herbicide leaching.To reduce the repetitive effects of common parameters in each index,a new index was developed by employing principal component analysis(PCA)to condense their information into a single ranking.The results of the PCA indicated that RS and biochar amendments could be an effective management practice for controlling the leaching potential of bispyribac-sodium in soil.展开更多
Understanding antibiotic biodegradation is important to the appreciation of their fate and removal from the environment. In this research an Isotope Ratio Mass Spectrometry(IRMS)method was developed to evaluate the ...Understanding antibiotic biodegradation is important to the appreciation of their fate and removal from the environment. In this research an Isotope Ratio Mass Spectrometry(IRMS)method was developed to evaluate the extent of biodegradation of the antibiotic,sulphanilamide, in contaminated groundwater. Results indicted an enrichment in δ^(13)C of8.44‰ from-26.56(at the contaminant source) to-18.12‰(300 m downfield of the source).These results confirm reductions in sulphanilamide concentrations(from 650 to 10 mg/L)across the contaminant plume to be attributable to biodegradation(56%) vs. other natural attenuation processes, such as dilution or dispersion(42%). To understand the controls on sulphanilamide degradation ex-situ microcosms assessed the influence of sulphanilamide concentration, redox conditions and an alternative carbon source. Results indicated, high levels of anaerobic capacity(~50% mineralisation) to degrade sulphanilamide under high(263 mg/L), moderate(10 mg/L) and low(0.02 mg/L) substrate concentrations. The addition of electron acceptors; nitrate and sulphate, did not significantly enhance the capacity of the groundwater to anaerobically biodegrade sulphanilamide. Interestingly, where alternative carbon sources were present, the addition of nitrate and sulphate inhibited sulphanilamide biodegradation. These results suggest, under in-situ conditions, when a preferential carbon source was available for biodegradation, sulphanilamide could be acting as a nitrogen and/or sulphur source. These findings are important as they highlight sulphanilamide being used as a carbon and a putative nitrogen and sulphur source, under prevailing iron reducing conditions.展开更多
文摘Alleppey is one of the thickly populated coastal towns of the Kerala state in southern India.Groundwater is the main source of drinking water for the 240,991 people living in this region.The groundwater is being extracted from a multi-layer aquifer system of unconsolidated to semi-consolidated sedimentary formations,which range in age from Recent to Tertiary.The public water distribution system uses dug and tube wells.Though there were reports on fluoride contamination,this study reports for the first time excess fluoride and excess salinity in the drinking water of the region.The quality parameters,like Electrical Conductivity(EC) ranges from 266 to 3900 μs/cm,the fluoride content ranges from 0.68 to2.88 mg/L,and the chloride ranges between the 5.7 to 1253 mg/L.The main water types are Na-HC03,NaCO3 and Na-Cl.The aqueous concentrations of F- and CO32- show positive correlation whereas F- and Ca2+ show negative correlation.The source of fluoride in the groundwater could be from dissolution of fluorapatite,which is a common mineral in the Tertiary sediments of the area.Long residence time,sediment-groundwater interaction and facies changes(Ca-HCO3 to Na-HCO3) during groundwater flow regime are the major factors responsible for the high fluoride content in the groundwater of the area.High strontium content and high EC in some of the wells indicate saline water intrusion that could be due to the excess pumping from the deeper aquifers of the area.The water quality index computation has revealed that 62%of groundwater belongs to poor quality and is not suitable for domestic purposes as per BIS and WHO standards.Since the groundwater is the only source of drinking water in the area,proper treatment strategies and regulating the groundwater extraction are required as the quality deterioration poses serious threat to human health.
文摘Aquifer remediation for a contaminated site is complex, expensive, and long-term. Groundwater modelling is often used as a tool to evaluate remedial alternatives and to design a groundwater remediation system. Groundwater modelling can also be used as a useful process to identify aquifer characteristics and contaminant behaviour that are not realized prior to modelling, to help diagnose what happened and why it happened at contaminant sites. Three real-world modelling cases are presented to demonstrate how groundwater modelling is applied to help understand contamination problems and how valuable the improved understanding is to decision-making and/or to remedial design.
文摘Restoration of contaminated soil and groundwater could be divided into two phases. The first phase takes aim at reducing human being's health risks by active remediation, while the second phase aims at eliminating ecological risks by natural attenuation (NA). Because of cost-effective and sustainable cleanup, monitored natural attenuation (MNA) and enhanced natural attenuation (ENA) have been gaining more attention recently, especially in the respects of ecological risk-oriented contaminated land management and a follow-up measure after active remediation. The uses and procedures of MNA for contaminated site cleanup and remediation in USA and EU were introduced firstly, and then possible applications of MNA in China were suggested. More developments and practices of MNA and ENA for managing contaminated sites in China are expected.
文摘Groundwater is an important source of freshwater for drinking and irrigation purposes, and hence protecting it against depletion and deterioration is extremely required. Groundwater could get contaminated physically, chemically, or microbiologically. Each type of contamination is linked to different sources and in turn imposes different types of health problems and consequences. A water sample from Bahr Al-Baqar Wastewater drain and 13 groundwater samples were collected for physiochemical and bacteriological analyses to evaluate groundwater contamination in As-Salihiyyah and adjacent areas, east of Nile Delta of Egypt. Nitrate, COD, and BOD values collected from Bahr Al-Baqr drain and groundwater exceeded the Egyptian maximum permissible limit for drinking water (0.5, 6, 10, respectively). The total number of viable microorganisms (TVC) test for Bahr Al-Baqar drain was recorded as more than 300 CFU/mL, and the total coliform recorded 1100 MPN/100ml, indicating high level of contamination. The high count of the TVC (16-↑300 CFU/mL) for groundwater and the total coliform (3 - 1100 MPN/100ml) indicated that groundwater is contaminated and unsafe for drinking and might be affected by Bahr Al-Baqar wastewater drain.
基金supported by the Fundamental Research Funds for the Central Universities(No.22120190013)National Natural Science Foundation of China(No.41807187)
文摘Identification of the location and intensity of groundwater pollution source contributes to the effect of pollution remediation,and is called groundwater contaminant source identification.This is a kind of typical groundwater inverse problem,and the solution is usually ill-posed.Especially considering the spatial variability of hydraulic conductivity field,the identification process is more challenging.In this paper,the solution framework of groundwater contaminant source identification is composed with groundwater pollutant transport model(MT3DMS)and a data assimilation method(Iterative local update ensemble smoother,ILUES).In addition,Karhunen-Loève expansion technique is adopted as a PCA method to realize dimension reduction.In practical problems,the geostatistical method is usually used to characterize the hydraulic conductivity field,and only the contaminant source information is inversely calculated in the identification process.In this study,the identification of contaminant source information under Kriging K-field is compared with simultaneous identification of source information and K-field.The results indicate that it is necessary to carry out simultaneous identification under heterogeneous site,and ILUES has good performance in solving high-dimensional parameter inversion problems.
基金supported by the National Natural Science Foundation of China (Grant Nos.42272283 and 41972252)the Graduate Innovation Fund of Jilin University (No.2022186).
文摘Groundwater contamination source identification(GCSI)is a prerequisite for contamination risk evaluation and efficient groundwater contamination remediation programs.The boundary condition generally is set as known variables in previous GCSI studies.However,in many practical cases,the boundary condition is complicated and cannot be estimated accurately in advance.Setting the boundary condition as known variables may seriously deviate from the actual situation and lead to distorted identification results.And the results of GCSI are affected by multiple factors,including contaminant source information,model parameters,boundary condition,etc.Therefore,if the boundary condition is not estimated accurately,other factors will also be estimated inaccurately.This study focuses on the unknown boundary condition and proposed to identify three types of unknown variables(contaminant source information,model parameters and boundary condition)innovatively.When simulation-optimization(S-O)method is applied to GCSI,the huge computational load is usually reduced by building surrogate models.However,when building surrogate models,the researchers need to select the models and optimize the hyperparameters to make the model powerful,which can be a lengthy process.The automated machine learning(AutoML)method was used to build surrogate model,which automates the model selection and hyperparameter optimization in machine learning engineering,largely reducing human operations and saving time.The accuracy of AutoML surrogate model is compared with the surrogate model used in eXtreme Gradient Boosting method(XGBoost),random forest method(RF),extra trees regressor method(ETR)and elasticnet method(EN)respectively,which are automatically selected in AutoML engineering.The results show that the surrogate model constructed by AutoML method has the best accuracy compared with the other four methods.This study provides reliable and strong support for GCSI.
文摘In abandoned mine sites, i.e., mine sites where mining operations have ended, wide spread contaminations are often evident, but the potential sources and pathways of contamination especially through the subsurface, are difficult to identify due to inadequate and sparse geochemical measurements available. Therefore, it is essential to design and implement a planned monitoring net-work to obtain essential information required for establishing the potential contamination source locations, i.e., waste dumps, tailing dams, pits and possible pathways through the subsurface, and to design a remediation strategy for rehabilitation. This study presents an illustrative application of modeling the flow and transport processes and monitoring network design in a study area hydrogeologically resembling an abandoned mine site in Queensland, Australia. In this preliminary study, the contaminant transport process modeled does not incorporate the reactive geochemistry of the contaminants. The transport process is modeled considering a generic conservative contaminant for the illustrative purpose of showing the potential application of an optimal monitoring design methodology. This study aims to design optimal monitoring network to: 1) minimize the contaminant solute mass estimation error;2) locate the plume boundary;3) select the monitoring locations with (potentially) high concentrations. A linked simulation optimization based methodology is utilized for optimal monitoring network design. The methodology is applied utilizing a recently developed software package CARE-GWMND, developed at James Cook University for optimal monitoring network design. Given the complexity of the groundwater systems and the sparsity of pollutant concentration observation data from the field, this software is capable of simulating the groundwater flow and solute transport with spatial interpolation of data from a sparse set of available data, and it utilizes the optimization algorithm to determine optimum locations for implementing monitoring wells.
文摘An artificial effluent lagoon for storing wastewater were excavated in Jiayuguan City since 1994. As a part of a demonstration project of Sino Australia cooperation, an assessment of the environmental impact of the lagoon was carried out. The assessment was based on field and laboratory tests and predictive model. The main impacts from the lagoon site are likely to be on the groundwater system, and, to a lesser extent, on ambient air quality in the vicinity. Currently it is expected that groundwater is being polluted with effluent from the effluent lagoon. Air pollution(odor nuisance) is mainly caused by untreated effluent in the irrigation channel. The impact of high total dissolved salt(TDS) on groundwater is likely to be significant in the long run if the lagoon is continuously used. There is, consequently, no likelihood of contamination of surface water system, particularly of the city water supply system, from infiltration of effluent at the lagoon.
文摘The research intends to bring out the contribution of leachate on groundwater in two dumpsites in Nguru and Potiskum all in Yobe state,Nigeria.A total of seven(7)and eight(8)VES by Schlumberger electrode with the use of Wenner electrode configuration.The results were interpreted by the use of WinRESIST for VES and IPWIN2INV for ERT.The study pointed out that,the area in question is comprised of four layers of geoelectric such as the topsoil,clay,sand,sandy clay and sand.The range of the first resistivity layer was from 6.16Ωm to 332Ωm in the first geo-electric layer and its thickness range from 2.77 m to 37.7 m and a depth range of 2.77 m to 37.7 m.the range of the second resistivity layer was from 16.5Ωm to 37.9Ωm which has the range of its thickness from 4.1 m to 10.7 m.The range of the third resistivity layer was from 101.2Ωm to 288.2Ωm which has the range of its thickness from 38.9 m to 99.7 m,and the first aquifer in the area.The range of the first resistivity layer was from 100.7Ωm to 214.3Ωm which has the range of its thickness from 28.5 m to 94 m.The fifth layer which is the second aquifer and has resistivity from 254Ωm to 350Ωm with a very large thickness.The range of the first resistivity aquifer is from 101.2Ωm to 288.2Ωm and the range of the second resistivity aquifer is from 253.8Ωm to 350.1Ωm.The 2D ERT profiles unveiled areas with low resistant zones and later discussed as zones penetrated by contaminants originated from dumpsites whereas high resistant zones represent areas of low or non-conductive materials in the area.Data obtained from four dumpsites indicated that leachate of the waste dumpsites penetrated into aquifers and polluted the groundwater.The existence of contaminants in the water was noted by a decrease in the formation resistant values.It is seen,from the results of the survey(geophysical)that the water in the area is polluted and it accounts for the prevalence of any disease related to water that are common in the area.
基金This work was supported by the National Natural Science Foundation of China(Grant No.21606214)the Water Pollution Control and Control of Major National Science and Technology Projects in China(No.2018ZX07109-003)。
文摘Microbial Fe(Ⅲ)reduction is a significant driving force for the biogeochemical cycles of C,O,P,S,N,and dominates the natural bio-purification of contaminants in groundwater(e.g.,petroleum hydrocarbons,chlorinated ethane,and chromium).In this review,the mechanisms and environmental significance of Fe(Ⅲ)(hydro)oxides bioreduction are summarized.Compared with crystalline Fe(Ⅲ)(hydro)oxides,amorphous Fe(m)(hydro)oxides are more bioavailable.Ligand and electron shuttle both play an important role in microbial Fe(Ⅲ)reduction.The restrictive factors of Fe(Ⅲ)(hydro)oxides bioreduction should be further investigated to reveal the characteristics and mechanisms of the process.It will improve the bioavailability of crystalline Fe(Ⅲ)(hydro)oxides and accelerate the anaerobic oxidation efficiency of the reduction state pollutants.Furthermore,the approach to extract,culture,and incubate the functional Fe(Ⅲ)reducing bacteria from actual complicated environment,and applying it to the bioremediation of organic,ammonia,and heavy metals contaminated groundwater will become a research topic in the future.There are a broad application prospects of Fe(Ⅲ)(hydro)oxides bioreduction to groundwater bioremediation,which includes the in situ injection and permeable reactive barriers and the innovative Kariz wells system.The study provides an important reference for the treatment of reduced pollutants in contaminated groundwater.
文摘The permeable reactive barrier(PRB) has proven to be a costeffective technique to remediate the petro leum contaminated groundwater at a northeast field site in China. In this study, the geology, hydrogeology and con tamination characterization of the field site were investigated and the natural hydrothermal palygorskite was chosen as a reactive medium. Furthermore, the adsorption of the total petroleum hydrocarbons(TPH) in the groundwater onto hydrothermal palygorskite and the adsorption kinetics were investigated. The results indicate that the removal rates of TPH, benzene, naphthalene and phenantharene could all reach up to 90% by hydrothermal palygorskite with a diameter of 0.25-2.00 mm that had been thermally pretreated at 140 ℃. The adsorption of TPH onto hydrothermal palygorskite after pretreatment followed a pseudosecondorder kinetic model and a Langmuir adsorption isotherm, suggesting that the theoretic adsorption capacity of hydrothermal palygorskite for adsorbate could be 4.2 g/g. Scan ning electron microscopy(SEM), infrared spectroscopy(IR), Xray diffraction(XRD) and Xray fluorescence spec troscopy(XRF) were carried out to analyze the adsorption mechanism. The results reveal that hydrothermal palygors kite is a fibrous silicate mineral enriched in Mg and A1 with large surface area and porosity. The dense cluster acicular and fibrous crystal of hydrothermal palygorskite, and its effect polar group OH played an important role in the physical and chemical adsorption processes of it for contaminants. This study has demonstrated hydrothermal paly gorskite is a reliable reactive medium for in situ remediation of petroleum contaminated groundwater at field sites.
文摘There is a rapidly emerging and potentially huge market for the remediation of contaminated ground- water in China. The Chinese government published a Water Action Plan in April 2015, a Soil Action Plan in May 2016, and a draft Soil Pollution Prevention and Control Law in June 2017. All of these new policies and regulations put pressures on local governments and contaminated site owners, obliging them to conduct site investigation and to cleanup contaminated groundwater. The Chinese population in northern regions heavily depend on groundwater, with nearly 70% of water supply coming from aquifer sources in the Beijing-Tianjin-Hebei region. However, poor groundwater quality due to natural geochemical background and anthropogeic pollution is a serious concern, with poor or very poor quality water observed in nearly 80% of groundwater monitoring wells in 17 northern provinces. Shallow groundwater in many areas has been contaminated by toxic pollutants such as heavy metals and chlorinated organic compounds. There is an urgent need to better understand the situation and to conduct groundwater remediation at contaminated sites. The Chinese government is investing heavily in the research and development for groundwater remediation, which is expected to greatly add to the quality and quantity of groundwater remediation projects in the near future.
基金supported by the United States Department of Agriculture Cooperative State Research,Education,and Extension Service(USDA-CSREES) grant through a subcontract from the University of Arkansas
文摘Groundwater contamination due to pesticide applications on agricultural lands is of great environmental concern. The mathematical models help to understand the mechanism of pesticide leaching in soils towards groundwater. We developed a user-friendly model called ArcPRZM-3 by integrating widely used Pesticide Root Zone Model version 3 (PRZM-3) using Visual Basic and Geographic Information System (GIS) based Avenue programming. ArcPRZM-3 could be used to simulate pesticide leaching towards groundwater with user-friendly input interfaces coupled with databases of crops, soils and pesticides. The outputs from ArcPRZM-3 could be visualized in user-friendly formats of tables, charts and maps. In this study we evaluated ArcPRZM-3 model by simulating bentazon leaching in soil towards groundwater. ArcPRZM-3 was applied to 37 sites in Woodruff County, Arkansas, USA to observe the daily average dissolved bentazon concentration for soybean, sorghum and rice at a depth of 1.8 m for a period of two years. Nineteen ranks of bentazon leaching potential were obtained using ArcPRZM-3 for all sites having different soil and crop combinations. ArcPRZM-3 simulation results for bentazon were compatible with the field monitored data in term of relative ranking and trend, although some uncertainties exist. This study indicated that macropore flow mechanism would be important in analyzing the effect of irrigation on groundwater contamination due to pesticides. Overall, ArcPRZM-3 could be used to simulate pesticide leaching towards groundwater more efficiently and effectively as compared to PRZM-3.
文摘Groundwater is the most appropriate and widely used source of drinking water, which is increasingly threatened by pollution from industrial and agricultural activities. To check the severity of the problem, 156 groundwater samples were collected from various depths (60-110 ft) of 52 different localities in Faisalabad city, the third largest metropolis in Pakistan, and analyzed for the metals (Zn, Cu, Cd, Ni, Pb, Mn and Fe) concentration in 2009. Quantification was done by using Flame Atomic Absorption Spectrophotometer technique and the results were compared with WHO standards for drinking water quality. Results showed that the levels of Cu, Mn and Fe were below the WHO standards while the concentrations of Zn, Cd, Ni and Pb were above the recommended levels of safe drinking water. Correlation analysis among the occurrence of these heavy metals revealed a highly significant and positive correlation of Mn with Zn and Fe. A significant and positive correlation of Cd was also found with Cu and groundwater depth showing that there is strong association between Cu-Cd pair and that the Cd concentration varies with depth of groundwater in the study area. Regional patterns of heavy metals occurrence were mapped using Geographical Information System (GIS) for the identification and demarcation of risk areas. The concentration maps may be used by policymakers of the city to mitigate groundwater pollution.
文摘Bispyribac-sodium is a weakly acidic herbicide with high water solubility and is thus a potential source of groundwater contamination.Considering the risk inherent to the use of this herbicide,this study assessed the impacts of rice straw(RS)and biochar amendments on the adsorption and leaching behavior of bispyribac-sodium in soil.Biochars were produced from RS at different pyrolysis temperatures and characterized using various spectral techniques.Rice straw had a surface area of 3.996×10^(4)m^(2)kg^(-1),which increased under pyrolysis;biochars prepared at 350 and 550℃(RS350 and RS550)in a closed furnace with limited oxygen supply had a surface area of 5.763×10^(4)and 6.890×10^(4)m^(2)kg^(-1),respectively,and biochar prepared by purging the pyroformer with N2(RSC)had the highest surface area of 12.173×10^(4)m^(2)kg^(-1).After amendment with RS and biochar,soil Freundlich adsorption capacity(KF ads)increased to varying extents in the order RSC>RS350>RS550,from 2.89×10^(3)to 29.57×10^(3)mg^(1-1)/nkg^(-1)L1/n,compared to1.55×10^(3)mg^(1-1)/nkg^(-1)L1/nin unamended soil.The variability in KF ads of bispyribac-sodium amongst the RS-and biochar-amended soils was dependent on the surface area of the amendments.The desorption of bispyribac-sodium decreased in the RS-and biochar-amended soils and varied from90.45%to 95.20%in unamended soils and from 60.95%to 89.50%in amended soils.The adsorption and desorption of bispyribac-sodium varied significantly depending on its concentration and the type and application rate of soil amendment.Different leaching risk evaluation indices,viz.,modified leach index(M.LEACH),leach index(LEACH),groundwater ubiquity score(GUS),Hornsby index(HI),leaching index(LIN),and pesticide leaching potential(PLP)index,were used to assess the susceptibility of groundwater to herbicide leaching.To reduce the repetitive effects of common parameters in each index,a new index was developed by employing principal component analysis(PCA)to condense their information into a single ranking.The results of the PCA indicated that RS and biochar amendments could be an effective management practice for controlling the leaching potential of bispyribac-sodium in soil.
基金Financial support from the Natural Environment Research Council(NERC)Chinese Academy of Sciences President's International Fellowship Initiative(No.2016VEA040)is gratefully acknowledged
文摘Understanding antibiotic biodegradation is important to the appreciation of their fate and removal from the environment. In this research an Isotope Ratio Mass Spectrometry(IRMS)method was developed to evaluate the extent of biodegradation of the antibiotic,sulphanilamide, in contaminated groundwater. Results indicted an enrichment in δ^(13)C of8.44‰ from-26.56(at the contaminant source) to-18.12‰(300 m downfield of the source).These results confirm reductions in sulphanilamide concentrations(from 650 to 10 mg/L)across the contaminant plume to be attributable to biodegradation(56%) vs. other natural attenuation processes, such as dilution or dispersion(42%). To understand the controls on sulphanilamide degradation ex-situ microcosms assessed the influence of sulphanilamide concentration, redox conditions and an alternative carbon source. Results indicated, high levels of anaerobic capacity(~50% mineralisation) to degrade sulphanilamide under high(263 mg/L), moderate(10 mg/L) and low(0.02 mg/L) substrate concentrations. The addition of electron acceptors; nitrate and sulphate, did not significantly enhance the capacity of the groundwater to anaerobically biodegrade sulphanilamide. Interestingly, where alternative carbon sources were present, the addition of nitrate and sulphate inhibited sulphanilamide biodegradation. These results suggest, under in-situ conditions, when a preferential carbon source was available for biodegradation, sulphanilamide could be acting as a nitrogen and/or sulphur source. These findings are important as they highlight sulphanilamide being used as a carbon and a putative nitrogen and sulphur source, under prevailing iron reducing conditions.