CF3I has been widely considered as a potential alternative for SF6,because it has low global warming potential(GWP)but an insulation capability that is 1.2 times greater than that of SF6.In this paper,the electron swa...CF3I has been widely considered as a potential alternative for SF6,because it has low global warming potential(GWP)but an insulation capability that is 1.2 times greater than that of SF6.In this paper,the electron swarm parameters of CF3I and its gas mixture with N2,including the effective ionization coefficient and electron drift velocity,are examined theoretically through the Boltzmann equation method in the condition of steady-state Townsend(SST)experiments.Based on the derived data of the limiting field strength of CF3I-N2gas mixture,taking into consideration of environmental aspects such as GWP,ozone depletion potential(ODP),liquefaction temperature and toxicity,we studied the possibility of applying the gas mixture as the insulation medium in gas-insulated switchgears(GIS)or cubic type gas-insulated switchgears(C-GIS).It is found that CF3I-N2gas mixtures contained 30%～70%CF3I perform comprehensively better than pure SF6and compressed N2,and especially in medium and low voltage environments,the boiling point of CF3I-N2gas mixture meets the domestic and global requirements in mid-low latitude regions.Therefore we conclude that the gas mixture is acceptable for replacing SF6as the insulation medium in C-GISs.展开更多
The electron swarm parameters including the density-normalized effective ionization coefficients（α-η）/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the...The electron swarm parameters including the density-normalized effective ionization coefficients（α-η）/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend（SST） experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td（1 Td = 10-17V·cm2）,while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of（αη）/N with the CF3I mixture ratio k,the limiting field strength（E/N） lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of（E/N） lim are essentially the same as that for pure SF 6.Additionally,the global warming potential（GWP） and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.展开更多
The non-uniformity of gas–liquid mixture is a critical issue which leads to the heat transfer deterioration of spiralwound heat exchangers(SWHEs).Two-phase mass flow rate and the content of gas are important paramete...The non-uniformity of gas–liquid mixture is a critical issue which leads to the heat transfer deterioration of spiralwound heat exchangers(SWHEs).Two-phase mass flow rate and the content of gas are important parameters as well as structural parameters which have prominent influences on flow distribution uniformity of SWHE shell side.In order to investigate the influences of these parameters,an experimental test system was built using water and air as mediums and a novel distributor named"tubes distributor"was designed.The effects of mass flow rate and the content of gas on two-phase distribution performance were analyzed,where the mass flow rate ranged from 28.4 to 171.9 kg·h-1 and the content of gas changed from 0.2 to 0.8,respectively.The results showed that the mixture mass flow rate considerably influenced the liquid distribution than that of gas phase and the larger mass flow rate exhibited the better distribution uniformity of two-phase flow.It was also found that the tubes distributor had the better two-phase uniformity when the content of gas was around 0.4.Tube diameter played an important role in the distribution of gas phase and slit width was more significant for the uniformity of liquid phase.展开更多
To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(...To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(150–250μm)was investigated in a semibatch vessel at variable temperatures(273,275,and 277 K)and pressures(5.8–7.8 MPa).During the gas hydrate reaction process,the changes in the gaseous phase composition were determined by gas chromatography.The results indicate that the gas hydrate formation process of the binary CO2/N2 gas mixture in fine sediments can be reduced to two stages.Firstly,the dissolved gas containing a large amount of CO2 formed gas hydrates,and then gaseous N2 participated in the gas hydrate formation.In the second stage,all the dissolved gas was consumed.Thus,both gaseous CO2 and N2 diffused into sediment.The first stage in different experiments lasted for 5–15 h,and>60%of the gas was consumed in this period.The gas consumption rate was greater in the first stage than in the second stage.After the completion of gas hydrate formation,the CO2 content in the gas hydrate was more than that in the gas phase.This indicates that CO2 formed hydrate easily than N2 in the binary mixture.Higher operating pressures and lower temperatures increased the gas consumption rate of the binary gas mixture in gas hydrate formation.展开更多
CF3I is a potential SF6 alternative gas.In order to study the insulation properties and synergistic effects of CF3I/N2 and CF3I/CO2 gas mixtures,two-term approximate Boltzmann equations were used to obtain the ionizat...CF3I is a potential SF6 alternative gas.In order to study the insulation properties and synergistic effects of CF3I/N2 and CF3I/CO2 gas mixtures,two-term approximate Boltzmann equations were used to obtain the ionization coefficient α,attachment coefficient η and the critical equivalent electrical field strength（E/N）（cr）.The results show that the（E/N）（cr）of CF3I gas at 300 K is 1.2 times that of SF6 gas,and CF3I/N2 and CF3I/CO2 gas mixtures both have synergistic effect occurred.The synergistic effect coefficient of CF3I/CO2 gas mixture was higher than that of CF3I/N2 gas mixture.But the（E/N）（cr）of CF3I/N2 is higher than that of CF3I/CO2 under the same conditions.When the content of CF3I exceeds 20%,the （E/N）（cr） of CF3I/N2 and CF3I/CO2 gas mixture increase linearly with the increasing of CF3I gas content.The breakdown voltage of CF3I/N2 gas mixture is also higher than that of CF3I/CO2 gas mixture in slightly non-uniform electrical field under power frequency voltage,but the synergistic effect coefficients of the two gas mixtures are basically the same.展开更多
An experimental study on acceleration mechanism of flame propagation of propane-air mixture in ducts with obstacles was conducted. The acceleration mechanism of flame propagation is mainly due to the positive feedback...An experimental study on acceleration mechanism of flame propagation of propane-air mixture in ducts with obstacles was conducted. The acceleration mechanism of flame propagation is mainly due to the positive feedback of the turbulence region induced by obstacles for combustion process. It can be seen from the experimental results that the maximum explosion pressure can increase by 20%, the maximum rate of pressure rise can increase by 10 times and the flame propagation velocity can increase by 20 times when obstacles are present.展开更多
In this paper, we focused on the identification of the normal and abnormal glow discharge modes in a neon-xenon gas mixture at low pressure. We considered four gas mixtures： 90%Ne-10%Xe, 80%Ne-20%Xe, 70%Ne-30%Xe and ...In this paper, we focused on the identification of the normal and abnormal glow discharge modes in a neon-xenon gas mixture at low pressure. We considered four gas mixtures： 90%Ne-10%Xe, 80%Ne-20%Xe, 70%Ne-30%Xe and 50%Ne-50%Xe at 1.5 Torr. The range of the gap voltage is 150-500 V. A one-dimensional fluid model with multiple species was used in this work, and the metastable state of the atoms as well as the radiation effects were integrated into the model too. The input data changed for each percentage in the gas mixture, and was calculated by BOLSIG＋ software. The parameters of particle transport and their rate coefficients strictly depend on the mean electron energy. The results show that the neon ion density is negligible compared to the xenon ion density, mostly in the case of 50%Ne-50%Xe.展开更多
Heavy biodegraded crude oils have larger numbers of coeluting compounds than nonbiodegraded oils, and they are typically not resolved with conventional gas chromatography（GC）. This unresolved complex mixture（UCM） ...Heavy biodegraded crude oils have larger numbers of coeluting compounds than nonbiodegraded oils, and they are typically not resolved with conventional gas chromatography（GC）. This unresolved complex mixture（UCM） has been investigated using comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry（GC×GC-To FMS） within a set of biodegraded petroleums derived from distinct sedimentary basins, including northwestern Sichuan（Neoproterozoic, marine）, Tarim（Early Paleozoic, marine）, Bohai Bay（Eocene, saline/brackish） and Pearl River Mouth（Eocene, freshwater）. In general, the hydrocarbons that constitute the UCM in petroleum saturate fractions can be classified into three catalogues based on the distributions of resolved compounds on two dimensional chromatograms. Group 1 is composed mainly of normal and branched alkanes, isoprenoid alkanes and monocyclic alkanes; Group 2 comprises primarily terpanes ranging from two to five rings, and Group 3 is dominated by monoaromatic hydrocarbons such as tetralins and monoaromatic steranes. In addition, the UCM is source dependent and varies between oil populations. i.e., the UCM of petroleum derived from Precambrian and Early Paleozoic marine, Eocene saline/brackish and freshwater source rocks is specifically rich in higher homologues of A-norsteranes, series of 1,1,3-trimethyl-2-alkylcyclohexanes（carotenoid-derived alkanes）, and tetralin and indane compounds, respectively.展开更多
Four-point flexural fatigue test for Gussasphalt mixture specimen was carried out at a straincontrolled mode system. The results showed that the development of the tested stiffness modulus and phase angle of the mixtu...Four-point flexural fatigue test for Gussasphalt mixture specimen was carried out at a straincontrolled mode system. The results showed that the development of the tested stiffness modulus and phase angle of the mixtures with increasing load cycles exhibited three periods, initial generation, slow development and failure period. The fatigue crack generation zone formed in the third period, in which the macro mechanical properties were signifi cantly decreased. Moreover, we also analyzed the effects of asphalt content and mixing temperature on the fatigue life of the mixture. The results showed that the fi rst period when the specimen＇s initial stiffness modulus was reduced to 80% accounted for 5%-10% of the total fatigue life; the second period in which the reduction became slow and demonstrated a liner relationship with load cycles occupied 70%-85% of the fatigue life; and the third period was about 5%-10%. The results indicated that the lower the mixing temperature, the longer the fatigue life of Gussasphalt mixture. Besides, the increasing of asphalt content has a minor effect on the fatigue life of Gussasphalt mixture展开更多
Perfluorocyclobutane(c-C4F8) has been recently considered as a potential alternative to SF6,because of its high electro-negativity and extremely low environmental effect.However,due to its high boiling point,c-C4F8 sh...Perfluorocyclobutane(c-C4F8) has been recently considered as a potential alternative to SF6,because of its high electro-negativity and extremely low environmental effect.However,due to its high boiling point,c-C4F8 should mixed with buffer gases such as N2 or CO2 in order to avoid the liquefaction at low temperature.This paper investigates insulating properties of c-C4F8/N2 gas mixtures from two aspects including electrical strength,and Global Warming Potential(GWP).Moreover,improved electrical breakdown model of gas mixtures is founded.Breakdown temperature and breakdown electrical field in gas mixtures can be obtained from rigorous Townsend criterion expression according to gas mixtures ratio and cross section data of gas mixtures in this model.Under the condition of different gas pressure(0.1~0.4 MPa),gas mixtures ratio(0～30%),and electrode gap(2~10 mm),breakdown voltages of gas mixtures are calculated by using of this model.Insulation strength of SF6/N2 mixed gas is compared with c-C4F8/N2 mixed gas in the same conditions.Research results show that theoretical computation corresponds with experiment.If the content of c-C4F8 or SF6 in mixtures is less than 30%,insulation strength between c-C4F8/N2 and SF6/N2 is very close.Considering two indexes(breakdown voltage,GWP),it is suitable for c-C4F8 content being 15%～20% in c-C4F8/N2 gas展开更多
The effects of 5 wt.-% Al and 10 wt.-% Al on the sulfidation behaviour of the Fe-25Cralloy in H<sub>2</sub>S-H<sub>2</sub> gas mixtures in the temperature range of 700～900 C has been studied.T...The effects of 5 wt.-% Al and 10 wt.-% Al on the sulfidation behaviour of the Fe-25Cralloy in H<sub>2</sub>S-H<sub>2</sub> gas mixtures in the temperature range of 700～900 C has been studied.Thesulfidation resistance of Fe-25Cr was improved and the sulfide scale morphologies,compositionand structure of Fe-25Cr changed remarkably.The sulfidation kinetics of the alloys with alu-minium obeyed basically the parabolic law after an initial period of reaction time.The sulfida-tion mechanism of the Fe-Cr-Al alloy has been proposed.展开更多
For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is pre...For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is presented. For gas mixture with chlorine larger than 3%, the emission intensity increases with the sealed gas temperature, while with chlorine about 2%, the emission intensity decreases with the increase in the gas temperature, and could be improved by cooling water. However, if chlorine is less than 1.5%, the discharge appears to be a mixture mode with filaments distributed in a diffused glow-like discharge, and the UV emission is independent on the gas temperature.展开更多
Within the biofilm and scales Legionella is less far susceptible to the effects of the most frequently used biocides. The objective of this study was to evaluate the effect of a 4-months continuous injection of a gas ...Within the biofilm and scales Legionella is less far susceptible to the effects of the most frequently used biocides. The objective of this study was to evaluate the effect of a 4-months continuous injection of a gas mixture (CO2 and inert gas) in the hot water distribution system of a large hotel colonized by L. pneumophila sg3 on limiting biofilm formation and scales and in turn Legionella growth. Before the continuous injection of the gas mixture, out of the 15 sampling points examined every month 60% were colonized by Legionella (mean concentrations of 102 cfu/L in the boilers and the return loop, and 104 cfu/L in taps and showers). One week after the injection of the gas mixture and daily fluxing of the distal outlets, the level of colonization decreased (3 cfu/L). When it was decided to flux all the distal outlets only 1 day per week the mean concentration of Legionella increased again (>104 cfu/L) in all the sampling points. Thus, cleaning of the boilers was performed and distal outlets were again fluxed daily. One week after the level of contamination decreased again (2 cfu/L). Nonetheless, the colonization was not eliminated and when fluxing of the distal outlets was not performed every day the mean concentrations of Legionella raised up to >104 cfu/L. Results indicate that the gas mixture was able to reduce the level of colonization by Legionella only because associated to the fluxing of the distal outlets.展开更多
The new experimental results of optimum gas mixture for High Pressure GasScintillation Drift Chamber(HPGSDC)are briefly presented.The features of the charge am-plification and the photon scintillation are investigated...The new experimental results of optimum gas mixture for High Pressure GasScintillation Drift Chamber(HPGSDC)are briefly presented.The features of the charge am-plification and the photon scintillation are investigated with different concentration of Ar in Xeand the anti-Penning effect is discovered in this case.This is useful for future experiments inHPGSDC.展开更多
Paschen law and equations, which ignore the influence of the Penning ionization on the electron ionization coefficient （α）, are always used as the approximation of the breakdown voltage criterion of the Penning gas...Paschen law and equations, which ignore the influence of the Penning ionization on the electron ionization coefficient （α）, are always used as the approximation of the breakdown voltage criterion of the Penning gas mixture in current researches of discharge characteristics of the plasma display panel （PDP）. It is doubtful that whether their results match the facts. Based on the Townsend gas self-sustaining discharge condition and the chemical kinetics analysis of the Penning gas mixture discharging in PDP, the empirical equation to describe the breakdown of the Penning gas mixture is given. It is used to calculate the breakdown voltage curves of Ne-Xe/MgO and Ne-Ar/MgO in a testing macroscopic discharge cell of AC-PDP. The effective secondary electron emission coefficients （γeff） of the MgO protective layers are derived by comparing the breakdown voltage curves obtained from the empirical equation with the experimental data of breakdown voltages. In comparison with the results calculated by the Paschen law and the equation which ignore the influence of the Penning ionization on α , the results calculated by the empirical equation have better conformity with experimental data. The empirical equation characterizes the breakdown of the Penning gas mixture in PDP effectively, and gives a convenient way to study its breakdown characteristics and the secondary electron emission behaviors.展开更多
This paper demonstrates the enhancement of mechanical properties and effective optimization of pulsed GTAW process parameters on aluminium alloy 6061 using sinusoidal AC wave with argon plus helium gas mixtures. Modif...This paper demonstrates the enhancement of mechanical properties and effective optimization of pulsed GTAW process parameters on aluminium alloy 6061 using sinusoidal AC wave with argon plus helium gas mixtures. Modified Taguchi Method (MTM) was employed to formulate experimental layout and to study effect of process parameter optimization on mechanical properties of the weld joints. Microstructural characterization of weld joint was carried out to understand the structural property correlation with process parameters.展开更多
基金Project supported by National Natural Science Foundation of China （51177101）
文摘CF3I has been widely considered as a potential alternative for SF6,because it has low global warming potential(GWP)but an insulation capability that is 1.2 times greater than that of SF6.In this paper,the electron swarm parameters of CF3I and its gas mixture with N2,including the effective ionization coefficient and electron drift velocity,are examined theoretically through the Boltzmann equation method in the condition of steady-state Townsend(SST)experiments.Based on the derived data of the limiting field strength of CF3I-N2gas mixture,taking into consideration of environmental aspects such as GWP,ozone depletion potential(ODP),liquefaction temperature and toxicity,we studied the possibility of applying the gas mixture as the insulation medium in gas-insulated switchgears(GIS)or cubic type gas-insulated switchgears(C-GIS).It is found that CF3I-N2gas mixtures contained 30%～70%CF3I perform comprehensively better than pure SF6and compressed N2,and especially in medium and low voltage environments,the boiling point of CF3I-N2gas mixture meets the domestic and global requirements in mid-low latitude regions.Therefore we conclude that the gas mixture is acceptable for replacing SF6as the insulation medium in C-GISs.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51177101)
文摘The electron swarm parameters including the density-normalized effective ionization coefficients（α-η）/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend（SST） experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td（1 Td = 10-17V·cm2）,while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of（αη）/N with the CF3I mixture ratio k,the limiting field strength（E/N） lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of（E/N） lim are essentially the same as that for pure SF 6.Additionally,the global warming potential（GWP） and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.
基金Supported by the research funds from MIIT program on High Technology Research Program of Ship(2013K4181).
文摘The non-uniformity of gas–liquid mixture is a critical issue which leads to the heat transfer deterioration of spiralwound heat exchangers(SWHEs).Two-phase mass flow rate and the content of gas are important parameters as well as structural parameters which have prominent influences on flow distribution uniformity of SWHE shell side.In order to investigate the influences of these parameters,an experimental test system was built using water and air as mediums and a novel distributor named"tubes distributor"was designed.The effects of mass flow rate and the content of gas on two-phase distribution performance were analyzed,where the mass flow rate ranged from 28.4 to 171.9 kg·h-1 and the content of gas changed from 0.2 to 0.8,respectively.The results showed that the mixture mass flow rate considerably influenced the liquid distribution than that of gas phase and the larger mass flow rate exhibited the better distribution uniformity of two-phase flow.It was also found that the tubes distributor had the better two-phase uniformity when the content of gas was around 0.4.Tube diameter played an important role in the distribution of gas phase and slit width was more significant for the uniformity of liquid phase.
基金Supported by the National Key Research and Development Plan of China(2017YFC0307306)National Natural Science Foundation of China(51676197,51576197)+2 种基金CAS Program(KGZD-EW-301)Guangzhou Science and Technology Project(201804010411)Youth Innovation Promotion Association CAS
文摘To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(150–250μm)was investigated in a semibatch vessel at variable temperatures(273,275,and 277 K)and pressures(5.8–7.8 MPa).During the gas hydrate reaction process,the changes in the gaseous phase composition were determined by gas chromatography.The results indicate that the gas hydrate formation process of the binary CO2/N2 gas mixture in fine sediments can be reduced to two stages.Firstly,the dissolved gas containing a large amount of CO2 formed gas hydrates,and then gaseous N2 participated in the gas hydrate formation.In the second stage,all the dissolved gas was consumed.Thus,both gaseous CO2 and N2 diffused into sediment.The first stage in different experiments lasted for 5–15 h,and>60%of the gas was consumed in this period.The gas consumption rate was greater in the first stage than in the second stage.After the completion of gas hydrate formation,the CO2 content in the gas hydrate was more than that in the gas phase.This indicates that CO2 formed hydrate easily than N2 in the binary mixture.Higher operating pressures and lower temperatures increased the gas consumption rate of the binary gas mixture in gas hydrate formation.
基金supported by National Natural Science Foundation of China (Grant No.51337006)China Postdoctoral Science Foundation (2016M602728)the Science and Technology Project of SGCC ‘Research on SF_6 Alternative Gas for Insulation and Arc Quenching Application’
文摘CF3I is a potential SF6 alternative gas.In order to study the insulation properties and synergistic effects of CF3I/N2 and CF3I/CO2 gas mixtures,two-term approximate Boltzmann equations were used to obtain the ionization coefficient α,attachment coefficient η and the critical equivalent electrical field strength（E/N）（cr）.The results show that the（E/N）（cr）of CF3I gas at 300 K is 1.2 times that of SF6 gas,and CF3I/N2 and CF3I/CO2 gas mixtures both have synergistic effect occurred.The synergistic effect coefficient of CF3I/CO2 gas mixture was higher than that of CF3I/N2 gas mixture.But the（E/N）（cr）of CF3I/N2 is higher than that of CF3I/CO2 under the same conditions.When the content of CF3I exceeds 20%,the （E/N）（cr） of CF3I/N2 and CF3I/CO2 gas mixture increase linearly with the increasing of CF3I gas content.The breakdown voltage of CF3I/N2 gas mixture is also higher than that of CF3I/CO2 gas mixture in slightly non-uniform electrical field under power frequency voltage,but the synergistic effect coefficients of the two gas mixtures are basically the same.
文摘An experimental study on acceleration mechanism of flame propagation of propane-air mixture in ducts with obstacles was conducted. The acceleration mechanism of flame propagation is mainly due to the positive feedback of the turbulence region induced by obstacles for combustion process. It can be seen from the experimental results that the maximum explosion pressure can increase by 20%, the maximum rate of pressure rise can increase by 10 times and the flame propagation velocity can increase by 20 times when obstacles are present.
文摘In this paper, we focused on the identification of the normal and abnormal glow discharge modes in a neon-xenon gas mixture at low pressure. We considered four gas mixtures： 90%Ne-10%Xe, 80%Ne-20%Xe, 70%Ne-30%Xe and 50%Ne-50%Xe at 1.5 Torr. The range of the gap voltage is 150-500 V. A one-dimensional fluid model with multiple species was used in this work, and the metastable state of the atoms as well as the radiation effects were integrated into the model too. The input data changed for each percentage in the gas mixture, and was calculated by BOLSIG＋ software. The parameters of particle transport and their rate coefficients strictly depend on the mean electron energy. The results show that the neon ion density is negligible compared to the xenon ion density, mostly in the case of 50%Ne-50%Xe.
基金funded by the National Natural Science Foundation of China(Grant No.41172126)the State Key Laboratory of Petroleum Resources and Prospecting(PRP/indep-2-1402)
文摘Heavy biodegraded crude oils have larger numbers of coeluting compounds than nonbiodegraded oils, and they are typically not resolved with conventional gas chromatography（GC）. This unresolved complex mixture（UCM） has been investigated using comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry（GC×GC-To FMS） within a set of biodegraded petroleums derived from distinct sedimentary basins, including northwestern Sichuan（Neoproterozoic, marine）, Tarim（Early Paleozoic, marine）, Bohai Bay（Eocene, saline/brackish） and Pearl River Mouth（Eocene, freshwater）. In general, the hydrocarbons that constitute the UCM in petroleum saturate fractions can be classified into three catalogues based on the distributions of resolved compounds on two dimensional chromatograms. Group 1 is composed mainly of normal and branched alkanes, isoprenoid alkanes and monocyclic alkanes; Group 2 comprises primarily terpanes ranging from two to five rings, and Group 3 is dominated by monoaromatic hydrocarbons such as tetralins and monoaromatic steranes. In addition, the UCM is source dependent and varies between oil populations. i.e., the UCM of petroleum derived from Precambrian and Early Paleozoic marine, Eocene saline/brackish and freshwater source rocks is specifically rich in higher homologues of A-norsteranes, series of 1,1,3-trimethyl-2-alkylcyclohexanes（carotenoid-derived alkanes）, and tetralin and indane compounds, respectively.
基金Funded by the National Natural Science Foundation of China(No.51202214)
文摘Four-point flexural fatigue test for Gussasphalt mixture specimen was carried out at a straincontrolled mode system. The results showed that the development of the tested stiffness modulus and phase angle of the mixtures with increasing load cycles exhibited three periods, initial generation, slow development and failure period. The fatigue crack generation zone formed in the third period, in which the macro mechanical properties were signifi cantly decreased. Moreover, we also analyzed the effects of asphalt content and mixing temperature on the fatigue life of the mixture. The results showed that the fi rst period when the specimen＇s initial stiffness modulus was reduced to 80% accounted for 5%-10% of the total fatigue life; the second period in which the reduction became slow and demonstrated a liner relationship with load cycles occupied 70%-85% of the fatigue life; and the third period was about 5%-10%. The results indicated that the lower the mixing temperature, the longer the fatigue life of Gussasphalt mixture. Besides, the increasing of asphalt content has a minor effect on the fatigue life of Gussasphalt mixture
基金Project Supported by the National Natural Science Foundation of China(No.:50777041)
文摘Perfluorocyclobutane(c-C4F8) has been recently considered as a potential alternative to SF6,because of its high electro-negativity and extremely low environmental effect.However,due to its high boiling point,c-C4F8 should mixed with buffer gases such as N2 or CO2 in order to avoid the liquefaction at low temperature.This paper investigates insulating properties of c-C4F8/N2 gas mixtures from two aspects including electrical strength,and Global Warming Potential(GWP).Moreover,improved electrical breakdown model of gas mixtures is founded.Breakdown temperature and breakdown electrical field in gas mixtures can be obtained from rigorous Townsend criterion expression according to gas mixtures ratio and cross section data of gas mixtures in this model.Under the condition of different gas pressure(0.1~0.4 MPa),gas mixtures ratio(0～30%),and electrode gap(2~10 mm),breakdown voltages of gas mixtures are calculated by using of this model.Insulation strength of SF6/N2 mixed gas is compared with c-C4F8/N2 mixed gas in the same conditions.Research results show that theoretical computation corresponds with experiment.If the content of c-C4F8 or SF6 in mixtures is less than 30%,insulation strength between c-C4F8/N2 and SF6/N2 is very close.Considering two indexes(breakdown voltage,GWP),it is suitable for c-C4F8 content being 15%～20% in c-C4F8/N2 gas
基金Financially supported by the National Natural Science Foundation of China and the Chinese Corrosion Science Laboratory
文摘The effects of 5 wt.-% Al and 10 wt.-% Al on the sulfidation behaviour of the Fe-25Cralloy in H<sub>2</sub>S-H<sub>2</sub> gas mixtures in the temperature range of 700～900 C has been studied.Thesulfidation resistance of Fe-25Cr was improved and the sulfide scale morphologies,compositionand structure of Fe-25Cr changed remarkably.The sulfidation kinetics of the alloys with alu-minium obeyed basically the parabolic law after an initial period of reaction time.The sulfida-tion mechanism of the Fe-Cr-Al alloy has been proposed.
基金This work is supported by Jiangsu Suzhou Purification Group Co.Ltd.
文摘For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is presented. For gas mixture with chlorine larger than 3%, the emission intensity increases with the sealed gas temperature, while with chlorine about 2%, the emission intensity decreases with the increase in the gas temperature, and could be improved by cooling water. However, if chlorine is less than 1.5%, the discharge appears to be a mixture mode with filaments distributed in a diffused glow-like discharge, and the UV emission is independent on the gas temperature.
文摘Within the biofilm and scales Legionella is less far susceptible to the effects of the most frequently used biocides. The objective of this study was to evaluate the effect of a 4-months continuous injection of a gas mixture (CO2 and inert gas) in the hot water distribution system of a large hotel colonized by L. pneumophila sg3 on limiting biofilm formation and scales and in turn Legionella growth. Before the continuous injection of the gas mixture, out of the 15 sampling points examined every month 60% were colonized by Legionella (mean concentrations of 102 cfu/L in the boilers and the return loop, and 104 cfu/L in taps and showers). One week after the injection of the gas mixture and daily fluxing of the distal outlets, the level of colonization decreased (3 cfu/L). When it was decided to flux all the distal outlets only 1 day per week the mean concentration of Legionella increased again (>104 cfu/L) in all the sampling points. Thus, cleaning of the boilers was performed and distal outlets were again fluxed daily. One week after the level of contamination decreased again (2 cfu/L). Nonetheless, the colonization was not eliminated and when fluxing of the distal outlets was not performed every day the mean concentrations of Legionella raised up to >104 cfu/L. Results indicate that the gas mixture was able to reduce the level of colonization by Legionella only because associated to the fluxing of the distal outlets.
文摘The new experimental results of optimum gas mixture for High Pressure GasScintillation Drift Chamber(HPGSDC)are briefly presented.The features of the charge am-plification and the photon scintillation are investigated with different concentration of Ar in Xeand the anti-Penning effect is discovered in this case.This is useful for future experiments inHPGSDC.
基金Science and Technology Research Foundation of the Ministry of Education, China (No. 0205-[2002]78)
文摘Paschen law and equations, which ignore the influence of the Penning ionization on the electron ionization coefficient （α）, are always used as the approximation of the breakdown voltage criterion of the Penning gas mixture in current researches of discharge characteristics of the plasma display panel （PDP）. It is doubtful that whether their results match the facts. Based on the Townsend gas self-sustaining discharge condition and the chemical kinetics analysis of the Penning gas mixture discharging in PDP, the empirical equation to describe the breakdown of the Penning gas mixture is given. It is used to calculate the breakdown voltage curves of Ne-Xe/MgO and Ne-Ar/MgO in a testing macroscopic discharge cell of AC-PDP. The effective secondary electron emission coefficients （γeff） of the MgO protective layers are derived by comparing the breakdown voltage curves obtained from the empirical equation with the experimental data of breakdown voltages. In comparison with the results calculated by the Paschen law and the equation which ignore the influence of the Penning ionization on α , the results calculated by the empirical equation have better conformity with experimental data. The empirical equation characterizes the breakdown of the Penning gas mixture in PDP effectively, and gives a convenient way to study its breakdown characteristics and the secondary electron emission behaviors.
文摘This paper demonstrates the enhancement of mechanical properties and effective optimization of pulsed GTAW process parameters on aluminium alloy 6061 using sinusoidal AC wave with argon plus helium gas mixtures. Modified Taguchi Method (MTM) was employed to formulate experimental layout and to study effect of process parameter optimization on mechanical properties of the weld joints. Microstructural characterization of weld joint was carried out to understand the structural property correlation with process parameters.
