Design and simulation of a silicon-based hybrid integrated optical gyroscope system

By combining a silicon-based lithium niobate modulator and a silicon-based Si3N4resonator with silicon-based photonics technology,a highly systematic design of a hybrid integrated optical gyroscope with enhanced reciprocity sensitivity and a dual micro-ring structure is proposed for the first time in this paper.The relationship between the device's structural parameters and optical performance is also analyzed by constructing a complete simulation link,which provides a theoretical design reference to improve the system's sensitivity.When the wavelength is 1550 nm,the conversion frequency of the dual-ring optical path is 50 MHz,the coupling coefficient is 0.2,and the radius R is 1000μm,the quality factor of the silicon-based Si_(3)N_(4)resonator is 2.58×10^(5),which is 1.58 times that of the silicon-on-insulator resonator.Moreover,the effective number of times the light travels around the ring before leaving the micro-ring is 5.93,which is 1.62 times that of the silicon-on-insulator resonator.The work fits the gyro dynamic output diagram,and solves the problem of low sensitivity at low speed by setting the phase offset.This results provide a basis for the further optimization of design and chip processing of the integrated optical gyroscope.

Simple Raman scattering sensor integrated with a metallic planar optical waveguide: effective modulation via minor structural adjustment

We report experimental realization of Raman spectra enhancement of copper phthalocyanine, using an on-chip metallic planar waveguide of the sub-millimeter scale. The oscillating ultrahigh order modes excited by the direct coupling method yield high optical intensity at resonance, which is different from the conventional strategy to create localized ＂hot spots.＂ The observed excitation efficiency of the Raman signal is significantly enhanced,owing to the high Q factor of the resonant cavity. Furthermore, effective modulation of the Raman intensity is available by adjusting the polymethyl methacrylate（PMMA） thickness in the guiding layer, i.e., by tuning the light–matter interaction length. A large modulation depth is verified through the fact that 10 times variation in the enhancement factor is observed in the experiment as the PMMA thickness varies from 7 to 23 μm.

Design of the low-loss waveguide coil for interferometric integrated optic gyroscopes

With the development of manufacturing technology,the propagation loss of the planar waveguide is getting lower and lower,and the shot-noise-limited sensitivity of an HOG will be greatly improved.When the propagation loss is getting lower,improper coupling-out waveguide in the waveguide coil may lead to non-ignorable bending loss and crosstalk because of the small radius of curvature and X-junction.In this paper,different couplingout waveguides have been designed.After calculation and optimization by the beam propagation method,we found the proper coupling-out waveguide having relatively low propagation loss,which can improve the sensitivity of the HOG.

一种用于通信C波段的光轨节点无源集成芯片

光轨是一种新型光通信网络结构,具有交换粒度小、带宽利用率高等优点。本文提出一种应用于通信C波段的新型光轨节点无源集成芯片,支撑1 545 nm、1 550 nm和1 555 nm三个C波段波长的通信。该新型光轨节点无源集成芯片是一种基于SOI纳米波导材料的片上微器件系统,核心器件由基于微环谐振器的解复用器和基于马赫-泽德尔干涉仪的环加强型热光光开关构成。通过理论计算和软件仿真,分别分析了解复用器和光开关的光学和通信性能,结果显示微环解复用器3个波长信道的串扰分别为22.5 dB、16.9 dB和16.3 dB;光开关的消光比分别为16.6 dB、19.7 dB和21.5 dB;插入损耗分别为0.86 dB、0.85 dB和0.68 dB,功耗约为51 mW。

干涉型与谐振型集成光学陀螺的比较

对干涉型集成光学陀螺(IIOG)和谐振型集成光学陀螺(RIOG)进行了比较。为使两者具有可比性,两种陀螺采用相同参数的光路器件、相近的偏置调制方法以及相同面积和传输损耗的光波导萨尼亚克(Sagnac)效应敏感环。推导了采用方波调制的干涉型集成光学陀螺和采用三角波调制的谐振型集成光学陀螺的散粒噪声灵敏度的准确表达式,通过优化波导器件参数计算得到两种陀螺最优的散粒噪声灵敏度。结果表明:随着光波导传输损耗的降低,干涉型集成光学陀螺的散粒噪声灵敏度要优于谐振型集成光学陀螺。随着超低损耗光波导技术的发展,干涉型集成光学陀螺在精度提高上具有较大潜力。