After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffrac...After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.展开更多
After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing RE and multiple alloying was investigated. The results show that after heat preservation at 560 ℃ and ...After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing RE and multiple alloying was investigated. The results show that after heat preservation at 560 ℃ and tempering for 4 h the hardness value of Fe-base hardfacing layer containing RE and multiple alloying can reach HRC57; By repeatedly heating circle 700 ℃17 ℃ for 150 times, the hardness value of Fe-base hardfacing layer can reach HRC43, tempering stability is higher and causes the secondary hardening phenomenon. Reasons for higher tempering stability of Fe-base hardfacing layer were analyzed by means of metallographic, XRD, TEM and EDS.展开更多
The thermal fatigue property of Cr-W-Mo-Ni-Mn-RE ferric-base hardfacing layer was investigated. The results show that the generation and propagation of thermal fatigue cracks prefer the parts of oxidation and etching ...The thermal fatigue property of Cr-W-Mo-Ni-Mn-RE ferric-base hardfacing layer was investigated. The results show that the generation and propagation of thermal fatigue cracks prefer the parts of oxidation and etching of the grain boundary, the joint efforts of cycle stress and oxidation at high temperatures are the main factors in the generation and propagation of thermal fatigue cracks. When the temperatures is below 600 ℃, the Cr-W-Mo-Ni-Mn-RE ferric-base hardfacing layer has higher ability of thermal fatigue resistance. The function of the alloy and rare earth elements was discussed.展开更多
The flux cored wires with different rare earth oxide additions for hardfacing the workpieces of medium-high carbon steel were developed. The microstrucmre of the hardfacing layer was observed using the optical microsc...The flux cored wires with different rare earth oxide additions for hardfacing the workpieces of medium-high carbon steel were developed. The microstrucmre of the hardfacing layer was observed using the optical microscopy. The average dimension of primary austenite grains in hardfacing layer was measured by image analyzer. The primary austenite grain growth activation energy and index were calculated according to Sellars＇s mode and Beck formula, respectively. Moreover, the effect of rare earth oxide on the growth dynamics of primary aus- tenite grain was analyzed, and then discussed with the misfit theory. The experimental results showed that, by adding rare earth oxide, the av- erage dimension of primary austenite grains in hardfacing layer of medium-high carbon steel decreased, and it was the smallest when the ad- dition of rare earth oxide was 5.17 wt.%. Meanwhile, at this rare earth oxide addition, the primary austenite grain growth activating energy in hardfacing layer was the largest, while its index was the smallest. The calculated results indicated that the primary austenite grain could be refined because LaAlO3 as heterogeneous nuclei of γ-Fe was the most effective.展开更多
文摘After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.
文摘After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing RE and multiple alloying was investigated. The results show that after heat preservation at 560 ℃ and tempering for 4 h the hardness value of Fe-base hardfacing layer containing RE and multiple alloying can reach HRC57; By repeatedly heating circle 700 ℃17 ℃ for 150 times, the hardness value of Fe-base hardfacing layer can reach HRC43, tempering stability is higher and causes the secondary hardening phenomenon. Reasons for higher tempering stability of Fe-base hardfacing layer were analyzed by means of metallographic, XRD, TEM and EDS.
文摘The thermal fatigue property of Cr-W-Mo-Ni-Mn-RE ferric-base hardfacing layer was investigated. The results show that the generation and propagation of thermal fatigue cracks prefer the parts of oxidation and etching of the grain boundary, the joint efforts of cycle stress and oxidation at high temperatures are the main factors in the generation and propagation of thermal fatigue cracks. When the temperatures is below 600 ℃, the Cr-W-Mo-Ni-Mn-RE ferric-base hardfacing layer has higher ability of thermal fatigue resistance. The function of the alloy and rare earth elements was discussed.
基金Program supported by National Nature Science Foundation of China(51271163)Key Project of Science and Technology of Hebei Province(09215106D)
文摘The flux cored wires with different rare earth oxide additions for hardfacing the workpieces of medium-high carbon steel were developed. The microstrucmre of the hardfacing layer was observed using the optical microscopy. The average dimension of primary austenite grains in hardfacing layer was measured by image analyzer. The primary austenite grain growth activation energy and index were calculated according to Sellars＇s mode and Beck formula, respectively. Moreover, the effect of rare earth oxide on the growth dynamics of primary aus- tenite grain was analyzed, and then discussed with the misfit theory. The experimental results showed that, by adding rare earth oxide, the av- erage dimension of primary austenite grains in hardfacing layer of medium-high carbon steel decreased, and it was the smallest when the ad- dition of rare earth oxide was 5.17 wt.%. Meanwhile, at this rare earth oxide addition, the primary austenite grain growth activating energy in hardfacing layer was the largest, while its index was the smallest. The calculated results indicated that the primary austenite grain could be refined because LaAlO3 as heterogeneous nuclei of γ-Fe was the most effective.
