The relationship between the head loss and the discharge and circulation of the conduit of a pump system with low head is an important problem with an obvious influence on the improvement of its hydraulic performance....The relationship between the head loss and the discharge and circulation of the conduit of a pump system with low head is an important problem with an obvious influence on the improvement of its hydraulic performance. The velocity circulation from the pump guide vane makes the relationship more complicated, which has to be understood comprehensively. The results indicate that, under the condition of zero circulation, the head loss of the inlet and outlet conduits is in proportion to the square of discharge. Under the condition that the Reynolds number is satisfied with the resistant square area, the conduit loss is in proportion to the square of discharge for the similar working points with different speeds in a certain rotational speed range, indicating that the pump system efficiency is constant. The outlet conduit loss of design discharge for a pump system with low head depends on the velocity circulation from the guide vane exit, and the relationship between the loss and the circulation is an open curve with an upward direction, meaning that there is an optimal circulation for the loss. Under the condition of various working points for a pump system with low head, the head loss of the outlet conduit is under the cross influence of both the discharge and the circulation. As a result, the relationship between the head loss and the discharge is almost linear, and the mechanism needs to be further studied.展开更多
The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dim...The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dimensional （3D） turbulence flow in conduits is an important method to study the hydraulic performance and conduct an optimum hydraulic design for the conduits. With the analyses of the flow patterns in the inlet and outlet conduits, the boundary conditions of the numerical simulation for them can be determined. The main obtained conclusions are as follows： （i） Under normal operation conditions, there is essentially no pre-swirl flow at the impeller chamber inlet of an axial-flow pump system, based on which the boundary condition at the inlet conduit may be defined. （ii） The circulation at the guide vane outlet of an axial-flow pump system has a great effect on the hydraulic performance of the outlet conduit, and there is optimum circulation for the performance. Therefore, it is strongly suggested to design the guide vane according to the optimum circulation. （iii） The residual circulation at the guide vane outlet needs to be considered for the inlet boundary condition of the outlet conduit, and the value of the circulation may be measured in a specially designed test model.展开更多
Mathematical-computational optimisation models of irrigation networks with a distributed flow that are capable of providing hydraulic data are important for understanding the behaviour of a system in relation to the d...Mathematical-computational optimisation models of irrigation networks with a distributed flow that are capable of providing hydraulic data are important for understanding the behaviour of a system in relation to the distribution of the hydraulic head (energy) and the pressure in the pipes of the network. The objective of this study was to examine the distribution of the parameters of hydraulic irrigation pipes, which were optimised using genetic algorithms. The degree of the optimisation was evaluated with the help of the genetic algorithms based on the diameters of stretch of the network: two for the lateral lines, four for the derivation lines, four for the secondary lines and one for the main line. A MatLab code was developed that considered all of the losses of energy, both distributed losses and those at specific locations between the beginning of the network and the pump system. The sensitivity analysis was based on the variations in the slope of the ground (0%, 2.5% and 5%). The results show that for pipes with a distributed flow, the influence of the behaviour of the kinetic energy in the pipe contributed to the distance between the energy lines and the piezometric lines at the beginning of each stretch after the decrease in the diameter of the pipes. At the end of the pipes, the values of the energy lines and the piezometric lines were very similar, and they were essentially the same for the final emitter.展开更多
文摘The relationship between the head loss and the discharge and circulation of the conduit of a pump system with low head is an important problem with an obvious influence on the improvement of its hydraulic performance. The velocity circulation from the pump guide vane makes the relationship more complicated, which has to be understood comprehensively. The results indicate that, under the condition of zero circulation, the head loss of the inlet and outlet conduits is in proportion to the square of discharge. Under the condition that the Reynolds number is satisfied with the resistant square area, the conduit loss is in proportion to the square of discharge for the similar working points with different speeds in a certain rotational speed range, indicating that the pump system efficiency is constant. The outlet conduit loss of design discharge for a pump system with low head depends on the velocity circulation from the guide vane exit, and the relationship between the loss and the circulation is an open curve with an upward direction, meaning that there is an optimal circulation for the loss. Under the condition of various working points for a pump system with low head, the head loss of the outlet conduit is under the cross influence of both the discharge and the circulation. As a result, the relationship between the head loss and the discharge is almost linear, and the mechanism needs to be further studied.
基金Project supported by the Natural Science Foundation of Jiangsu Higher Education Institutions ofChina(No.12KJD570001)
文摘The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dimensional （3D） turbulence flow in conduits is an important method to study the hydraulic performance and conduct an optimum hydraulic design for the conduits. With the analyses of the flow patterns in the inlet and outlet conduits, the boundary conditions of the numerical simulation for them can be determined. The main obtained conclusions are as follows： （i） Under normal operation conditions, there is essentially no pre-swirl flow at the impeller chamber inlet of an axial-flow pump system, based on which the boundary condition at the inlet conduit may be defined. （ii） The circulation at the guide vane outlet of an axial-flow pump system has a great effect on the hydraulic performance of the outlet conduit, and there is optimum circulation for the performance. Therefore, it is strongly suggested to design the guide vane according to the optimum circulation. （iii） The residual circulation at the guide vane outlet needs to be considered for the inlet boundary condition of the outlet conduit, and the value of the circulation may be measured in a specially designed test model.
文摘Mathematical-computational optimisation models of irrigation networks with a distributed flow that are capable of providing hydraulic data are important for understanding the behaviour of a system in relation to the distribution of the hydraulic head (energy) and the pressure in the pipes of the network. The objective of this study was to examine the distribution of the parameters of hydraulic irrigation pipes, which were optimised using genetic algorithms. The degree of the optimisation was evaluated with the help of the genetic algorithms based on the diameters of stretch of the network: two for the lateral lines, four for the derivation lines, four for the secondary lines and one for the main line. A MatLab code was developed that considered all of the losses of energy, both distributed losses and those at specific locations between the beginning of the network and the pump system. The sensitivity analysis was based on the variations in the slope of the ground (0%, 2.5% and 5%). The results show that for pipes with a distributed flow, the influence of the behaviour of the kinetic energy in the pipe contributed to the distance between the energy lines and the piezometric lines at the beginning of each stretch after the decrease in the diameter of the pipes. At the end of the pipes, the values of the energy lines and the piezometric lines were very similar, and they were essentially the same for the final emitter.
